Direct determination of iron in urine and serum using graphite furnace atomic absorption spectrometry

A simple, rapid and low-cost method for the routine determination of iron in urine and serum using graphite furnace atomic absorption spectrometry is described which may provide an alternative to the more widespread automated spectrophotometric methods. The urine and serum samples were simply diluted with water prior to analysis. Matrix modification was found to be redundant. The standard additions technique or the use of matrix matched standards (addition calibration) was found to be unnecessary and, therefore, the calibration was performed using aqueous standards. For serum analysis the degree of dilution could be reduced by using the less sensitive 302.0-nm resonance line, yielding more precise determinations, and for urine analysis, interferences were eliminated by means of a L'vov platform. The interferences that exist in the presence of nitric acid are also discussed. Finally, the presence of background absorption was investigated by means of Zeeman effect atomic absorption.     

Electrothermal atomization atomic absorption spectrometry with stabilized aqueous standards for the determination of cadmium in whole blood

The use of aqueous calibration graphs obtained by addition of a mixture of (NH₄₂HPO₄ and Mg(NO₃)₂ was used in order to determine cadmium in blood samples diluted only with Triton X-100, using atomic absorption spectrometry with electrothermal atomization using a L'vov platform and peak-height evaluation. The addition of this mixture to the aqueous standards results in a thermal behaviour of aqueous cadmium similar to that shown by cadmium in a blood matrix. Several reference materials were analysed for cadmium by the proposed method. The results indicate that the accurate determination of blood cadmium is possible.     

Direct determination of cadmium and copper in seawater using a transversely heated graphite furnace atomic absorption spectrometer with Zeeman-effect background corrector

Methods for the direct determination of copper and cadmium in seawater were described using a graphite furnace atomic absorption spectrometer (GFAAS) equipped with a transversely heated graphite atomizer (THGA) and a longitudinal Zeeman effect background corrector. Ammonium nitrate was used as the chemical modifier to determine copper. The mixture of di-ammonium hydrogen phosphate and ammonium nitrate was used as the chemical modifier to determine cadmium. The matrix interference was removed completely so that a simple calibration curve method could be applied. This work is the first one with the capability of determining cadmium in unpolluted seawater directly with GFAAS using calibration curve based on simple aqueous standards. The accuracy of the methods was confirmed by analysis of three kinds of certified reference saline waters. The detection limits (LODs), with injection of a 20-mul aliquot of seawater sample, were 0.06 mug l(-1) for copper and 0.005 mug l(-1) for cadmium.     

Cloud point extraction–thermospray flame quartz furnace atomic absorption spectrometry for determination of ultratrace cadmium in water and urine

A simple, low cost and highly sensitive method based on cloud point extraction (CPE) for separation/preconcentration and thermospray flame quartz furnace atomic absorption spectrometry was proposed for the determination of ultratrace cadmium in water and urine samples. The analytical procedure involved the formation of analyte-entrapped surfactant micelles by mixing the analyte solution with an ammonium pyrrolidinedithiocarbamate (APDC) solution and a Triton X-114 solution. When the temperature of the system was higher than the cloud point of Triton X-114, the complex of cadmium-PDC entered the surfactant-rich phase and thus separation of the analyte from the matrix was achieved. Under optimal chemical and instrumental conditions, the limit of detection was 0.04 μg/L for cadmium with a sample volume of 10 mL. The analytical results of cadmium in water and urine samples agreed well with those by ICP-MS.     

Electrothermal atomic absorption spectrometric determination of cadmium in environmental samples with niobium wire preconcentration method

A preconcentration method by adsorption of cadmium on a niobium wire was developed for the environmental waters, followed by electrothermal atomic absorption spectrometry with a tungsten tube atomizer. After the preconcentration, the niobium wire was directly inserted into the tungsten tube atomizer. In the preconcentration (adsorption) process of cadmium, the optimal immersing time was 60?s. The effects of large amounts of concomitants on the preconcentration of cadmium were evaluated. When 10³–10⁴ fold excess of matrix elements existed in aqueous solution at pH 4 and 9, the cadmium response was profoundly affected by the matrix elements. However, the cadmium absorption signal was not significantly influenced at pH 7. Therefore, pH 7 was selected for the application into the real environmental samples. Under the optimal conditions, the detection limit (3S/N) for cadmium by the niobium wire preconcentration method was 7.0?pg?mL^?1 and the relative standard deviation was 6.8%. The method with preconcentration on a niobium wire was applied to the determination of cadmium in water and proved to be sensitive, simple and convenient. Because this preconcentration method can be utilized in the in situ treatment of trace cadmium in environmental water samples, it was unnecessary to carry the water samples to the analytical work place. The technique was shown to be useful for the determination of cadmium in environmental water samples at 0.1–1?µg?L^?1 levels.     

Cadmium analysis in soil by microwave acid digestion and graphite furnace atomic absorption spectrometry

The need to determine micronutrients and toxic elements in soils has grown in recent years and cadmium is of special interest. A method has been developed for the determination of cadmium in soils based on a prior acid digestion of the samples with nitric acid in closed Teflon vessels, into a microwave over. The cadmium determination was carried out by graphite furnace atomic absorption spectrometry (GFAAS) with L'vov platform. Optimum operating conditions, analyte modifiers and matrix interferences have been investigated. The best matrix modifier was found to be ammonium dihydrogen phosphate. The interferences are greatly reduced under these operating conditions and calibration can be performed with simple aqueous solutions of the metal standard. The method is rapid and provides accurate and precise results that agree with certified values for two reference materials: BCR 141 (calcareous loam soil) and BCR 277 (estuarine sediment).     

Direct determination of cadmium in urine using graphite furnace atomic absorption spectrometry with Zeeman-effect background correction

A procedure is described for the direct determination of cadmium in human urine using graphite furnace atomic absorption spectrometry with Zeeman-effect background correction. Except for a straightforward 1 + 1 V/V dilution of samples with 1.5% nitric acid, no matrix modifier or sample pre-treatment was necessary, thus reducing the risk of contamination. The concentration of cadmium in urine was evaluated directly from a calibration graph prepared using a metal-spiked human urine pool. In this way the time-consuming method of standard additions was avoided, permitting an increased sample throughput (120-150 samples per day; 90 s per analysis) with minimal attention of the analyst. In routine use, the precision (both within day and day to day) and limit of detection were of the order of less than 10% and 0.05 micrograms l-1 of Cd, respectively. The method is suitable for the biological monitoring of cadmium in the general population or in occupationally exposed persons.     

Elimination of interferences in electrothermal-atomization atomic-absorption spectrometry of cadmium

The determination of cadmium by use of a molybdenum-tube atomizer and atomic-absorption spectrometry has been investigated. The absorption profiles for various cadmium compounds and the interferences caused by large amounts of concomitants were evaluated. Sulphur was tested as a matrix modifier for removal of interference and found to be effective at the interferent levels likely to be found in biological samples. A simple, precise and convenient method for determination of cadmium in biological materials has been established.     

Simultaneous determination of weakly ionizable analytes in urine and plasma samples by transient pseudo-isotachophoresis in capillary zone electrophoresis

A rapid method for the simultaneous determination of several non-steroidal anti-inflammatory drugs (NSAIDs) in human plasma and urine was developed using transient pseudo-isotachophoresis (ITP) in capillary zone electrophoresis (CZE). The influence of different parameters on resolution and preconcentration efficiency, such as background electrolyte (BGE) composition, sample injection, sample matrix composition, and pH, were studied to optimize the transient pseudo-ITP performance. Optimized conditions were a BGE consisting of 100 mM Na₂B₄O₇ in 10% aqueous MeOH solution and hydrodynamic injection of the sample at 50 mbar for 90 s. The sample was prepared in a solution mixture of 1% NaCl/ethanol (30:70 v/v) at pH 10. Our results show that this simple strategy offers improved sensitivity compared to conventional CZE analysis, reaching a 45-fold preconcentration factor. The detection limits (LODs) were as low as 0.07 mg/L for standard samples with good repeatability (values of relative standard deviation, %RSD < 11%). The method was applied to the analysis of NSAIDs in biological samples. Validation for human plasma and urine samples demonstrated good linearity, low detection limits, and satisfactory repeatability values.     

Characterization of an avidin-bonded column for direct injection in reversed-phase high-performance liquid chromatography

An automatic method for the determination of metabolites of Ropivacaine in urine was set up. It utilizes supported liquid membrane extraction for sample clean-up and enrichment, followed by ion-pair chromatography determination using UV detection. The extraction was very selective with no observed interfering compounds from the urine matrix, permitting simple isocratic chromatographic analysis. The detection limits for spiked urine samples were 2–18 nM for the different compounds. The repeatability was 1–3% (RSD) with an internal standard that was also extracted, and about twice without this standard. A throughput of 3.3 samples per hour was achieved and the liquid membrane was stable for more than a week.     

A liquid-liquid distribution method for the study of complexation of cadmium in natural waters

Liquid-liquid distribution of cadmium between pyridine solution in benzene and aqueous phase containing iodide has been radiometrically investigated, in order to develop a simple method for the study of complexation of cadmium in aqueous solutions. The degree of complexation of cadmium can be determined from the decrease of the distribution ratio in the presence of complexing agents forming non-extractable complexes with this metal. The method was verified for the determination of the composition and stability constants of cadmium with acetate, tartrate, oxalate and glycolate anions and applied for the study of complexation of cadmium in natural waters.     

Determination of Ultratrace Amounts of Copper and Cadmium in Seawater by Graphite Furnace Atomic Absorption Spectrometry with Flow-Injection Semi On-line Preconcentration

Methods are described for the determination of ultratrace amounts of copper and cadmium in seawater by graphite furnace atomic absorption spectrometry with flow-injection, microcolumn preconcentration. A new type of C₁₈ column loaded with sodium diethyldithiocarbamate (sodium-DDC) was used to extract copper and cadmium from seawater as the DDC chelates. The analytical effects of the pH of the mixture of the sample and sodium-DDC solutions and the concentration of the chelating reagent were studied. Sodium-DDC-loaded columns and unloaded C₁₈ columns with different shapes and volumes were compared. To determine copper in seawater, a simple aqueous calibration was made with a mixture of palladium and magnesium nitrate as a matrix modifier, while for cadmium no matrix modifier was necessary. This method required only small seawater volumes, 600 and 400 μl for the determination of copper and cadmium respectively, with preconcentration factors of 15-fold for copper and 10-fold for cadmium. Detection limits for the preconcentration of aqueous solutions of copper and cadmium were 0.024 and 0.004 μg liter⁻¹ (3σ), respectively. Results for determinations of copper and cadmium in National Research Council of Canada, CASS-2, Nearshore Seawater Reference Material showed no significant differences between the certified values and the measured values, based on Student′s t test at the 95% confidence level. The relative standard deviations of the various measurements varied between 2 and 8%.     

Solid-phase microextraction for the determination of pethidine and methadone in human urine using gas chromatography with nitrogen-phosphorus detection

A simple and rapid analytical method is presented for the determination of pethidine (meperidine) and methadone in human urine using solid-phase microextraction (SPME) and gas chromatography with nitrogen-phosphorus detection (GC-NPD). After the analytes had been partitioned between an extracting phase and the aqueous sample matrix, the needle of the coating fiber assembly was injected directly into the GC injector. The analytes were thermally desorbed in the heated injector (240 degrees C) and subsequently separated and detected by the GC-NPD system. The factors influencing the SPME method, such as the salt (NaCl) effect (15%), pH (pH 11), and equilibration time (30 min), were optimized. The calibration graphs for urine samples showed a good linearity. The detection limit was below 1 ng ml-1 for both drugs.     

Determination of molybdenum, chromium and aluminium in human urine by electrothermal atomic absorption spectrometry using fast-programme methodology

Rapid and direct procedures for the determination of molybdenum, chromium and aluminium in human urine samples are developed. Fast-programme methodology is used to simplify the heating cycles. Hydrogen peroxide, nitric acid and Triton X-100 are added to the urine samples which are directly introduced into the furnace. For molybdenum, two successive injection steps are required due to the low level of this element in the samples analyzed. Calibration is carried out using aqueous standards for aluminium and the standard additions method for both molybdenum and chromium. The reliability of the procedures is checked by analyzing two certified reference materials.     

Cadmium analysis in soil by microwave acid digestion and graphite furnace atomic absorption spectrometry

The need to determine micronutrients and toxic elements in soils has grown in recent years and cadmium is of special interest. A method has been developed for the determination of cadmium in soils based on a prior acid digestion of the samples with nitric acid in closed Teflon vessels, into a microwave over. The cadmium determination was carried out by graphite furnace atomic absorption spectrometry (GFAAS) with Lvov platform. Optimum operating conditions, analyte modifiers and matrix interferences have been investigated. The best matrix modifier was found to be ammonium dihydrogen phosphate. The interferences are greatly reduced under these operating conditions and calibration can be performed with simple aqueous solutions of the metal standard. The method is rapid and provides accurate and precise results that agree with certified values for two reference materials: BCR 141 (calcareous loam soil) and BCR 277 (estuarine sediment).     

Flame atomic absorption determination of trace amounts of cadmium after preconcentration using a thiol-containing task-specific ionic liquid

Dispersive liquid-liquid microextraction (DLLME) based on a task-specific ionic liquid (TSIL) was developed for the extraction and preconcentration of trace amounts of cadmium from aqueous samples, followed by flame atomic absorption spectrometry (FAAS) determination. In the proposed approach, cadmium ions are extracted from aqueous samples using small volumes of trioctylmethylammonium thiosalicylate (TOMATS) dissolved in acetone. TOMATS is a thiol-containing TSIL that can form metal thiolate complexes due to the chelating effect of the ortho-positioned carboxylate group relative to the thiol functionality. The main parameters affecting the performance of DLLME based on TSIL, such as pH, amount of TOMATS, extraction time, injection volume, salt addition, and centrifugation time, were optimized. Under optimum conditions, an LOD of 1.16 ng/mL and a good RSD of 1.8% at 60.0 ng/mL were obtained (n=7). The proposed method was applied to tap water, wastewater, well water, and milk samples. The results showed that DLLME based on TSIL combined with FAAS is a rapid, simple, sensitive, selective, low cost, volatile organic solvent-free, and efficient analytical method for the separation and determination of trace amounts of cadmium ions.     

Multielement determination of cadmium and lead in urine by simultaneous electrothermal atomic absorption spectrometry with an end-capped graphite tube.

A method for the multielement determination of cadmium and lead in urine is proposed by simultaneous electrothermal atomic absorption spectrometry (SIMAAS) with an end-capped transversely heated graphite atomizer (EC-THGA). The best conditions for cadmium and lead determination were obtained in the presence of NH4H2PO4 as a chemical modifier, using 500 degrees C and 1800 degrees C as the pyrolysis and atomization temperatures, respectively. Urine samples were diluted 1 + 4 directly in autosampler cups with a mixture of 0.125% (w/v) Triton X-100 + 2.5% (v/v) HNO3 + 0.31% (w/v) NH4H2PO4. The optimized heating program was carried out in 57 s, and the instrument calibration was done with aqueous reference solutions. The use of EC-THGA increased the sensitivity of cadmium and lead by 14% and 25%, respectively. The detection limits (n = 20, 3delta) were 0.03 microg L(-1) (0.36 pg) for cadmium and 0.57 microg L(-1) (6.8 pg) for lead. The performance of EC-THGA was acceptable up to 500 heating cycles. The reliability of the entire procedure was checked with the analysis of a lyophilized urine certified reference material. The found concentrations were in agreement with the recommended values (95% confidence level).     

Microwave digestion and matrix separation for the determination of cadmium in urine samples by electrothermal atomization atomic absorption spectrometry using a fast temperature program

 A method is proposed which involves sample pretreatment followed by electrothermal atomic absorption spectrometry (ETAAS) for determination of cadmium in human urine. A microwave digestion system was devised to accommodate double-closed vessels for simultaneous digestion of batches of up to 24 urine samples in about 20 min. After digestion, matrix substances which might interfere were removed using silica-immobilized 8-hydroxyquinoline (I-8HOQ) columns. The analyte adsorbed on the column was then eluted with dilute nitric acid solution and determined by ETAAS using a fast temperature program. Neither ashing steps in the furnace heating program nor use of matrix modifiers was necessary. The accuracy, precision, limit of detection, and sample throughput of the method were evaluated. With meticulous control of systematic errors which may be introduced in the pretreatment procedures, the present method can serve as a reference technique for the analysis of Cd in urine samples. Received: 29 July 1996/Revised: 30 September 1996/Accepted: 13 October 1996     

Microwave digestion and matrix separation for the determination of cadmium in urine samples by electrothermal atomization atomic absorption spectrometry using a fast temperature program

 A method is proposed which involves sample pretreatment followed by electrothermal atomic absorption spectrometry (ETAAS) for determination of cadmium in human urine. A microwave digestion system was devised to accommodate double-closed vessels for simultaneous digestion of batches of up to 24 urine samples in about 20 min. After digestion, matrix substances which might interfere were removed using silica-immobilized 8-hydroxyquinoline (I-8HOQ) columns. The analyte adsorbed on the column was then eluted with dilute nitric acid solution and determined by ETAAS using a fast temperature program. Neither ashing steps in the furnace heating program nor use of matrix modifiers was necessary. The accuracy, precision, limit of detection, and sample throughput of the method were evaluated. With meticulous control of systematic errors which may be introduced in the pretreatment procedures, the present method can serve as a reference technique for the analysis of Cd in urine samples. Received: 29 July 1996/Revised: 30 September 1996/Accepted: 13 October 1996     

ETAAS determination of nickel in serum and urine

Methods for the direct determination of Ni in human blood serum and urine by electrothermal atomic absorption spectrometry (ETAAS) are described. Hydrogen peroxide was proposed as matrix modifier, assisting thermal decomposition of proteins during the ashing step. A pyrolysis temperature of 1,200 degrees C was found to be optimal while 2,100 degrees C and 2,200 degrees C were found to be optimal atomizing temperatures for Ni in serum and urine respectively. Calibration was performed by using a calibration curve prepared with aqueous standard solutions of Ni (glycine must be used as modifier for Ni in aqueous solutions). The limits of detection, defined as the blank values plus 3 times the standard deviation of the blank values, were 0.2 microg/L for both serum and urine samples. Relative standard deviations for serum samples with concentrations of Ni in the range 0.5-2 microg/L were 10-15% and for urine samples with Ni concentrations in the range 0.5-2.5 microg/L were 8-10%.