Determination of levodopa by capillary electrophoresis with chemiluminescence detection

A rapid and simple method using capillary electrophoresis (CE) with chemiluminescence (CL) detection was developed for the determination of levodopa. This method was based on enhance effect of levodopa on the CL reaction between luminol and potassium hexacyanoferrate(III) (K₃[Fe(CN)₆]) in alkaline aqueous solution. CL detection employed a lab-built reaction flow cell and a photon counter. The optimized conditions for the CL detection were 1.0 × 10⁻⁵ M luminol added to the CE running buffer and 5.0 × 10⁻⁵ M K₃[Fe(CN)₆] in 0.6 M NaOH solution introduced postcolumn. Under the optimal conditions, a linear range from 5.0 × 10⁻⁸ to 2.5 × 10⁻⁶ M (r = 9991), and a detection limit of 2.0 × 10⁻⁸ M (signal/noise = 3) for levodopa were achieved. The precision (R.S.D.) on peak area (at 5.0 × 10⁻⁷ M of levodopa, n = 11) was 4.1%. The applicability of the method for the analysis of pharmaceutical and human plasma samples was examined.     

Microchip electrophoresis with chemiluminescence detection for assaying ascorbic acid and amino acids in single cells

A method based on microchip electrophoresis (MCE) with chemiluminescence (CL) detection was developed for the determination of ascorbic acid (AA) and amino acids including tryptophan (Trp), glycine (Gly) and alanine (Ala) present in single cells. Cell injection, loading, lysing, electrophoretic separation and CL detection were integrated onto a simple cross microfluidic chip. A single cell was loaded in the cross intersection by electrophoretic means through applying a set of potentials at the reservoirs. The docked cell was lysed rapidly under a direct electric field. The intracellular contents were MCE separated within 130 s. CL detection was based on the enhancing effects of AA and amino acids on the CL reaction of luminol with K₃[Fe(CN)₆]. Rat hepatocytes were prepared and analyzed as the test cellular model. The average intracellular contents of AA, Trp, Gly and Ala in single rat hepatocytes were found to be 38.3, 5.15, 3.78 and 3.84 fmol (n = 12), respectively.     

An on-column fracture/end-column reaction interface for chemiluminescence detection in capillary electrophoresis

Chemiluminescence (CL) offers a sensitive detection method for capillary electrophoresis (CE), but the implementation of CE–CL is usually under compromised operating conditions for CE, such as the prerequisite of extreme pH buffer for optimal CL reaction at the capillary outlet. This has sometimes significantly deteriorated the separation of CE. In this study, the development of a new interface makes it possible to optimize the operating conditions for CE separation and CL detection independently. The interface consists of an on-column fracture being installed in a reservoir near the capillary end to create an electrical connection and also serve as reagent addition entrance. The capillary terminal is inserted into an end-column reservoir for CL reaction and detection. In this arrangement, the applied electric field has been decoupled from the CL detection, which is proved to effectively improve CE's performance by allowing the use of optimal CE buffers. At the same time, it enables the optimization of CL detection independently. The applicability of this interface was evaluated by using acridinium ester (AE) and luminol systems. For AE system, the interfering products of CL reagent (⁻OH, HO₂⁻) have been prevented, and the pH range of CE buffer can be independent to the optimal pH value of AE CL reaction, which is usually below 3. The AE was detected using running buffer at pH 8.7, giving a detection limit of 0.1 nM (S/N = 3), and the theoretical plate numbers is as high as 56 000. The on-column fracture based configuration is simple, sensitive and easy to implement.     

Mechanisms involved in chemical vapor generation by aqueous tetrahydroborate(III) derivatization : Role of hexacyanoferrate(III) in plumbane generation

The role played by K₃Fe(CN)₆ (0.08 or 1.5 g l^− 1) in producing strong enhancement factors in the generation efficiency of plumbane in the reaction of NaBH₄ (10 or 40 g l^− 1) with Pb(II) (50 μg l^− 1) in 0.1 M HCl solution, was investigated by using continuous flow chemical vapor generation coupled with atomic fluorescence spectrometry (CF-CVG-AFS). Different mixing sequences and reaction times of reagents were tested using different chemifold setups. Part of CF-CVG-AFS experiments were performed using the on-line, delayed addition of Pb(II) to a K₃Fe(CN)₆ + NaBH₄ reaction mixture. Kinetic calculations estimating the concentration of K₃Fe(CN)₆ remaining in the K₃Fe(CN)₆ + NaBH₄ reaction mixture before it merged with Pb(II) solution were also performed. Batch experiments measuring the amount of hydrogen evolved (pressure of H₂ vs time) and pH variation during K₃Fe(CN)₆ + NaBH₄ + HCl reaction were performed in order to have a correct estimation of the concentration of K₃Fe(CN)₆ remaining in the reaction system. The comparison of CF-CVG-AFS experiments with kinetic calculations indicates that strong enhancement factors of plumbane generation can be obtained without any interaction of K₃Fe(CN)₆ with Pb(II). The key role of K₃Fe(CN)₆ is recognized in its reaction with NaBH₄ to give “special” borane complex intermediates, which are highly effective in the generation of plumbane from Pb(II).     

Quantum dot-enhanced chemiluminescence detection for simultaneous determination of dopamine and epinephrine by capillary electrophoresis

A sensitive method based on quantum dot (QD)-enhanced capillary electrophoresis-chemiluminescence (CE-CL) detection was developed for simultaneous determination of dopamine (DA) and epinephrine (E). In this work, CdTe QD was added into the running buffer of CE to catalyze the post-column CL reaction between luminol and hydrogen peroxide, achieving higher CL emission. Negative peaks were produced due to the inhibitory effects on CL emission from DA and E eluted from the electrophoretic capillary. The decrease in CL intensity was proportional to the concentration of DA and E in the range of 8.0 × 10⁻⁸-5.0 × 10⁻⁶ M and 4.0 × 10⁻⁸-5.0 × 10⁻⁶ M, respectively. Detection limits for DA and E were 2.3 × 10⁻⁸ M and 9.3 × 10⁻⁹ M, respectively. Using this method, the levels of DA and E in human urine from healthy donors were determined.     

Capillary zone electrophoresis with pre-column NDA derivatization and amperometric detection for the analysis of four aliphatic diamines

A method was developed for the analysis of four aliphatic diamines by capillary zone electrophoresis using pre-column derivatization with naphthalene-2,3-dicarboxaldehyde (NDA)/CN⁻ and amperometric detection. The pre-column derivatization reaction conditions including the molar ratio of NDA to amines, the cyanide concentration, the pH value of derivatization buffer, and the reaction time, were investigated. The separation of four derivatives of aliphatic diamines has been optimized by capillary zone electrophoresis (CZE) using end-column amperometric detection with a carbon fiber microelectrode, at a constant potential of 0.7 V versus SCE. The optimum conditions for the separation were 10 mM Tris-H₃PO₄ (pH 4.0) for the running buffer solution, 15 kV for the separation voltage. The detection limits for diaminopropane, putrescine, cadaverine, diaminohexane were 6.7×10⁻⁸, 5.1×10⁻⁸, 1.9×10⁻⁷ and 3.8×10⁻⁷ M, respectively (S/N=3). The proposed method was applied to the determination of aliphatic diamines in a lake water sample by the standard addition method. The recovery of these amines in water was 89.9-107%.     

Ultrasensitive chemiluminescence detection of aM vanadium(IV) by capillary electrophoresis

Ultrasensitive chemiluminescence (CL) detection of aM vanadium(IV) in capillary electrophoresis (CE) is first reported. In this work, inclusion of the luminol in the electrophoretic carrier electrolyte avoids the loss of light signal that occurs when luminol and hydrogen peroxide are mixed in advance, as in the conventional method in CE-CL detection. The detection limit (S/N ratio=3) for V(IV) is 2.4×10⁻¹⁷ M (24 aM), which has been improved by a factor of 10⁴ as compared with that of the most sensitive metal ion detection (Co²⁺ 0.5 pM) reported previously. In addition, the separation of V(IV) and V(V) has been performed successfully.     

Pre-evaluation of metal ions as a catalyst on chemiluminometric sequential injection analysis with luminol-H2O2 system

Catalytic effect of metal ions on luminol chemiluminescence (CL) was investigated by sequential injection analysis (SIA). The SIA system was set up with two solenoid micropumps, an eight-port selection valve, and a photosensor module with a fountain-type chemiluminescence cell. The SIA system was controlled and the CL signals were collected by a LabVIEW program. Aqueous solutions of luminol, H₂O₂, and a sample solution containing metal ion were sequentially aspirated to the holding coil, and the zones were immediately propelled to the detection cell. After optimizing the parameters using 1 × 10⁻⁵ M Fe³⁺ solution, catalytic effect of some metal species was compared. Among 16 metal species examined, relatively strong CL responses were obtained with Fe³⁺, Fe²⁺, VO²⁺, VO₃⁻, MnO₄⁻, Co²⁺, and Cu²⁺. The limits of detection by the present SIA system were comparable to FIA systems. Permanganate ion showed the highest CL sensitivity among the metal species examined; the calibration graph for MnO₄⁻ was linear at the concentration level of 10⁻⁸ M and the limit of detection for MnO₄⁻ was 4.0 × 10⁻¹⁰ M (S/N = 3).     

Determination of bromide ions in seawater using flow system with chemiluminescence detection

A simple flow-based procedure with chemiluminescence (CL) detection is proposed for bromide ion determination in seawater. The procedure was based on the oxidation of bromide to bromine by chloramine-T followed by the reaction of bromine with luminol resulting in CL emission. Since no significant reaction within chloramine-T and luminol was observed, the detection was carried out without bromine extraction from the oxidant medium. The proposed flow system had a sampling rate of 40 determinations per hour, reagents consumption of 100 μg luminol and 60 μg chloramine-T per determination, a limit of detection of 0.5 mg l⁻¹ bromide ions, a linear concentration range (r = 0.999 and n = 7) between 0 and 100 mg l⁻¹, and a coefficient of variance better than 2.5% (for 10 measurements of a 10 mg l⁻¹ Br⁻ solution) were achieved. The analytical system was applied for the determination of bromide in seawater and estuarine-water samples, obtaining an analyte recovery ranging from 94 to 102% and comparing the results with a reference spectrophotometric method no significant difference was observed in 95% confidence level.     

On-Line Inhibited Chemiluminescence Detection of 2,3,5,4′-Tetrahydroxystilbene-2-O-β-D-Glucoside and Baicalin Separated by Capillary Electrophoresis

A capillary electrophoresis on-line inhibited luminol-K₃Fe(CN)₆ chemiluminescence method was employed for the determination of 2,3,5,4-tetrahydroxystilbene-2-O--D-glucoside (I) and baicalin (baicalein 7-O-glucuronide, II). In this system, luminol was added to running buffer solution and introduced at the head of the separation capillary, and K₃Fe(CN)₆ was introduced at the end of the capillary. The parameters affecting the separation process and CL detection were studied. Under the optimum conditions, the baseline separation of the two analytes was obtained within 4min. The detection limits (S/N=3) for I and II were 3.0×10^–6M and 1.2×10^–6M, respectively. This proposed method was successfully applied to the determination of II in traditional Chinese medicines.     

Determination of thyroxine hormone by luminol chemiluminescence

A chemiluminescence (CL) flow system for determination of thyroxine (Thy) is presented. It is based on the catalytic effect of cobalt(II) on the CL reaction between luminol and hydrogen peroxide. The iodinated chemical structure of Thy causes a heavy atom effect. The luminol CL signals show significant quenching by Thy. The calibration graph for Thy is linear for 15-70 μg ml⁻¹ and the 3σ detection limits are 27 μg ml⁻¹ for d-Thy and 23 μg ml⁻¹ for l-Thy.     

Sub-picogram determination of Vitamin B12 in pharmaceuticals and human serum using flow injection with chemiluminescence detection

A sensitive chemiluminescence (CL) method, based on the enhancive effect of cobalt(II) on the CL reaction between luminol and dissolved oxygen in a flow injection (FI) system, was proposed for determination of Vitamin B₁₂. The increment of the CL intensity was proportional to the concentration of Vitamin B₁₂, giving a calibration graph linear over the concentration from 2.0×10⁻¹⁰ to 1.2×10⁻⁶ g l⁻¹ (r²=0.9992) with the detection limit of 5.0×10⁻¹¹ g l⁻¹ (3σ). At a flow rate of 2.0 ml min⁻¹, a complete determination of Vitamin B₁₂, including sampling and washing, could be accomplished in 0.5 min with the relative standard deviations (R.S.D.) of less than 5.0%. The proposed method was applied successfully to the determination of Vitamin B₁₂ in pharmaceuticals, human serum, egg yolk and fish tissue.     

Capillary Electrophoresis Chemiluminescence for the Analysis of Flavonoids in Pharmaceuticals and Human Plasma

A capillary electrophoresis (CE)-chemiluminescence (CL) method has been developed for the determination of the pharmacologically active flavonoids, including rutin and quercetin in pharmaceuticals and human plasma containing Ginkgo biloba leaves extract (EGb). The separation was conducted in borate buffer and luminol. The post-column CL reagent was K₃Fe(CN)₆ in NaOH medium. Rutin and quercetin were baseline separated within 10 min with detection limits of 1.0 and 5.0 nM, respectively. The maximum intra- and inter-day relative standard deviations (RSD) of migration time of analytes were <3.5 %. Moreover, the high selectivity of the CL detection and the high-separation efficiency of CE render the method the potential of quick analyzing the pharmacologically active substances in complex matrix with satisfactory results.

     

基于碳纳米管修饰电极的胆碱电化学发光生物传感器研制

在碳纳米管(CNTs)和K3Fe(CN)6修饰的铂电极上吸附固定胆碱氧化酶,以鲁米诺为发光试剂,研制了胆碱电化学发光(ECL)生物传感器.CNTs可有效提高电极表面的电荷传输能力、提高电极表面的生物相容性和对酶分子的固载能力;K3Fe(CN)6对酶活性具有激活作用,同时对H2O2增敏的鲁米诺ECL有增强作用,均有利于提...     

Ultrasensitive determination of DNA sequences by flow injection chemiluminescence using silver ions as labels

We presented a new strategy for ultrasensitive detection of DNA sequences based on the novel detection probe which was labeled with Ag⁺ using metallothionein (MT) as a bridge. The assay relied on a sandwich-type DNA hybridization in which the DNA targets were first hybridized to the captured oligonucleotide probes immobilized on Fe₃O₄@Au composite magnetic nanoparticles (MNPs), and then the Ag⁺-modified detection probes were used to monitor the presence of the specific DNA targets. After being anchored on the hybrids, Ag⁺ was released down through acidic treatment and sensitively determined by a coupling flow injection–chemiluminescent reaction system (Ag⁺–Mn²⁺–K₂S₂O₈–H₃PO₄–luminol) (FI–CL). The experiment results showed that the CL intensities increased linearly with the concentrations of DNA targets in the range from 10 to 500 pmol L⁻¹ with a detection limit of 3.3 pmol L⁻¹. The high sensitivity in this work may be ascribed to the high molar ratio of Ag⁺–MT, the sensitive determination of Ag⁺ by the coupling FI–CL reaction system and the perfect magnetic separation based on Fe₃O₄@Au composite MNPs. Moreover, the proposed strategy exhibited excellent selectivity against the mismatched DNA sequences and could be applied to real samples analysis.     

Determination of Riboflavin Using Flow Injection Inhibitory Chemiluminescence

ABSTRACT

A new flow injection method for the determination of riboflavin based on the inhibition of the intensity of chemiluminescence (CL) from the luminol-K₃Fe(CN)₆ system is described. While riboflavin mixed with K₃Fe(CN)₆, by the fast oxidation reaction between riboflavin and K₃Fe(CN)₆, K₄Fe(CN)₆ was generated, which then inhibited the CL reaction of K₃Fe(CN)₆ and luminol in alkaline aqueous solution. The CL emission was correlated with the riboflavin concentration in the range from 0.032 to 100 μg·ml?¹, and the detection limit was 0.01 μg·ml?¹ (3σ). A complete analysis could be performed in 2 min with a relative standard deviation of less than 2.2%. The influence of foreign species was studied and the method has been applied successfully to the determination of riboflavin in pharmaceutical samples, the recovery was from 98.0% to 102%.     

Capillary Electrophoresis Chemiluminescence for the Analysis of Flavonoids in Pharmaceuticals and Human Plasma

A capillary electrophoresis (CE)-chemiluminescence (CL) method has been developed for the determination of the pharmacologically active flavonoids, including rutin and quercetin in pharmaceuticals and human plasma containing Ginkgo biloba leaves extract (EGb). The separation was conducted in borate buffer and luminol. The post-column CL reagent was K₃Fe(CN)₆ in NaOH medium. Rutin and quercetin were baseline separated within 10 min with detection limits of 1.0 and 5.0 nM, respectively. The maximum intra- and inter-day relative standard deviations (RSD) of migration time of analytes were <3.5 %. Moreover, the high selectivity of the CL detection and the high-separation efficiency of CE render the method the potential of quick analyzing the pharmacologically active substances in complex matrix with satisfactory results.     

Chemiluminescence determination of carbofuran at trace levels in lettuce and waters by flow-injection analysis

A simple, fast chemiluminescence (CL) flow-injection (FI) method based on the reaction of luminol with KMnO₄ in alkaline medium has been described for the direct determination of carbofuran. The method is based on the enhancing effect in the emission light from the oxidation of luminol produced in presence of carbofuran. The optimisation of instrumental and chemical variables influencing the CL response of the method has been carried out by applying experimental design, using the proposed flow-injection manifold. Under the optimal conditions, the CL intensity was linear for a carbofuran concentration over the range of 0.06-0.5 μg ml⁻¹, with a detection limit of 0.02 μg ml⁻¹. The method has been successfully applied to the determination of carbofuran residues in spiked water and lettuce samples.     

Simultaneous, sensitive and selective on-line chemiluminescence determination of Cr(III) and Cr(VI) by capillary electrophoresis

A novel in-capillary reduction and capillary electrophoretic (CE)-chemiluminescence (CL) method was developed for the sensitive and selective determination of chromium(III) and chromium(VI). The proposed method was based on the in-capillary reduction of Cr(VI) with acidic H₂O₂ to form Cr(III) using the zone-passing technique and chemiluminescence detection of Cr(III). The sample [Cr³⁺ and CrO₄²⁻], hydrochloric acid, and H₂O₂ (reductant) solution segments were injected for specified periods of time in this order from the anodic end of a capillary, followed by application of an appropriate running voltage between both ends. As both chromium species have opposite charges, Cr³⁺ migrates to the cathode while CrO₄²⁻ ion, moving oppositely to the anode, reacts with acidic H₂O_2, resulted in formation of Cr³⁺. Based on the migration time difference of both Cr³⁺ ions, they were separated by zone electrophoresis. Running buffer was composed of 0.02 mol l⁻¹ HAc-NaAc (pH 4.7) with 1×10⁻³ mol l⁻¹ EDTA. Parameters affecting CE-CL separation and detection, such as reductant concentration, mixing mode of the analytes with CL reagent, CL reaction reagent pH and concentration, stability of luminol-hydrogen peroxide mixed solution were optimized. The limits of detection for chromium(III) and chromium(VI) (3σ) were 6×10⁻¹³ mol l⁻¹ (mass concentration 12 zmol) and 8×10⁻¹² mol l⁻¹ (160 zmol), respectively. This method offered potential advantages of simplicity, sensitivity, selectivity and applicability to the determination of Cr(III) and Cr(VI) in environmental water.     

Detection of nicotine based on molecularly imprinted TiO2-modified electrodes

Amperometric detection of nicotine (NIC) was carried out on a titanium dioxide (TiO₂)/poly(3,4-ethylenedioxythiophene) (PEDOT)-modified electrode by a molecular imprinting technique. In order to improve the conductivity of the substrate, PEDOT was coated onto the sintered electrode by in situ electrochemical polymerization of the monomer. The sensing potential of the NIC-imprinted TiO₂ electrode (ITO/TiO₂[NIC]/PEDOT) in a phosphate-buffered saline (PBS) solution (pH 7.4) containing 0.1 M KCl was determined to be 0.88 V (vs. Ag/AgCl/saturated KCl). The linear detection range for NIC oxidation on the so-called ITO/TiO₂[NIC]/PEDOT electrode was 0-5 mM, with a sensitivity and limit of detection of 31.35 μA mM⁻¹ cm⁻² and 4.9 μM, respectively. When comparing with the performance of the non-imprinted one, the sensitivity ratio was about 1.24. The sensitivity enhancement was attributed to the increase in the electroactive area of the imprinted electrode. The at-rest stability of the ITO/TiO₂[NIC]/PEDOT electrode was tested over a period of 3 days. The current response remained about 85% of its initial value at the end of 2 days. The ITO/TiO₂[NIC]/PEDOT electrode showed reasonably good selectivity in distinguishing NIC from its major interferent, (−)-cotinine (COT). Moreover, scanning electrochemical microscopy (SECM) was employed to elucidate the surface morphology of the imprinted and non-imprinted electrodes using Fe(CN)₆³⁻/Fe(CN)₆⁴⁻ as a redox probe on a platinum tip. The imprinted electrode was further characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR).