A density functional theory study on the adsorption and dissociation of N2O on Cu2O(1 1 1) surface

Density functional theory has been employed to investigate the adsorption and the dissociation of an N₂O at different sites on perfect and defective Cu₂O(1 1 1) surfaces. The calculations are performed on periodic systems using slab model. The Lewis acid site, Cu_CUS, and Lewis base site, O_SUF are considered for adsorption. Adsorption energies and the energies of the dissociation reaction N₂O → N₂ + O(s) at different sites are calculated. The calculations show that adsorption of N₂O is more favorable on Cu_CUS adsorption site energetically. Cu_CUS site exhibits a very high activity. The Cu_CUS-N₂O reaction is exothermic with a reaction energy of 77.45 kJ mol⁻¹ and an activation energy of 88.82 kJ mol⁻¹, whereas the O_SUF-N₂O reaction is endothermic with a reaction energy of 205.21 kJ mol⁻¹ and an activation energy of 256.19 kJ mol⁻¹. The calculations for defective surface indicate that O vacancy cannot obviously improve the catalytic activity of Cu₂O.     

Intermittent temperature-programmed desorption study of perovskites used for catalytic purposes

A differential desorption technique, called intermittent temperature-programmed desorption (ITPD), was used to give new insights into the properties of La_1−xSr_xCo_0.8Fe_0.2O₃ perovskites as a contribution to improve their performances with respect to various important application fields such as catalysis, electrocatalysis and solid oxide fuel cells (SOFC). Both ITPD and interrupted TPD (carried out at different heating rates) evidenced two distinct oxygen adsorbed states, desorbing at temperatures lower than 400 °C, corresponding to less than 5% of a compact monolayer of oxide ions. The first one, for low desorption temperatures (lower than 290 °C) exhibits a heat of adsorption (ΔH) distribution from 101 to 121 kJ mol⁻¹. The second one, for higher desorption temperatures (between 290 and 400 °C) corresponds to ΔH = 146 ± 4 kJ mol⁻¹. Additionally, for temperatures higher than 400 °C, we observed a continuous desorption of oxygen species, probably originating from the sub-surface or semi-bulk, with an associated activation energy of desorption ≥175 kJ mol⁻¹.     

Determination of the rate of H + O2 + M → HO2 + M (M = N2, Ar, H2O) from ignition of syngas at practical conditions

In H₂ and H₂/CO oxidation, the H + O₂ + M termination step is one of the most important reactions at elevated pressures. With the recent, increased interest in synthetic fuels, an accurate assessment of its rate coefficient becomes increasingly important, especially for real fuel/air mixtures. Ignition delay times in shock-tube experiments at the conditions selected in this study are only sensitive to the rates of the title reaction and the branching reaction H + O₂ = OH + O, the rate of which is known to a high level of accuracy. The rate coefficient of the title reaction for M = N₂, Ar, and H₂O was determined by adjusting its value in a detailed chemical kinetics model to match ignition delay times for H₂/CO/O₂/N₂, H₂/CO/O₂/Ar, and H₂/CO/O₂/N₂/H₂O mixtures with fuel/air equivalence ratios of ? = 0.5, 0.9, and 1.0. The rate of H + O₂ + N₂ = HO₂ + N₂ was measured to be 2.7 (−0.7/+0.8) × 10¹⁵ cm⁶/mol² s for T = 916-1265 K and P = 1-17 atm. The present determination agrees well with the recent study of Bates et al. [R.W. Bates, D.M. Golden, R.K. Hanson, C.T. Bowman, Phys. Chem. Chem. Phys. 3 (2001) 2337-2342], whose rate expressions are suggested herein for modeling the falloff regime. The rate of H + O₂ + Ar = HO₂ + Ar was measured to be 1.9 × 10¹⁵ cm⁶/mol² s for T = 932-965 K and P = 1.4 atm. The rate of H + O₂ + H₂O = HO₂ + H₂O was measured to be 3.3 × 10¹⁶ cm⁶/mol² s for T = 1071-1161 K and P = 1.3 atm. These are the first experimental measurements of the rates of the title reactions in practical combustion fuel/air mixtures.     

High-pressure laminar flame speeds and kinetic modeling of carbon monoxide/hydrogen combustion

Laminar flame speeds were accurately measured for CO/H₂/air and CO/H₂/O₂/helium mixtures at different equivalence ratios and mixing ratios by the constant-pressure spherical flame technique for pressures up to 40 atmospheres. A kinetic mechanism based on recently published reaction rate constants is presented to model these measured laminar flame speeds as well as a limited set of other experimental data. The reaction rate constant of CO + HO₂ → CO₂ + OH was determined to be k = 1.15 × 10⁵T^2.278 exp(−17.55 kcal/RT) cm³ mol⁻¹ s⁻¹ at 300-2500 K by ab initio calculations. The kinetic model accurately predicts our measured flame speeds and the non-premixed counterflow ignition temperatures determined in our previous study, as well as homogeneous system data from literature, such as concentration profiles from flow reactor and ignition delay time from shock tube experiments.     

A combined ab initio and atomistic simulation study of the surface and interfacial structures and energies of hydrated scheelite: introducing a CaWO4 potential model

Density functional theory (DFT) calculations of the calcium tungstate material scheelite CaWO₄ have shown that water introduced into the bulk material remains undissociated and leads to swelling and layering of the structure, a behaviour which may resemble silicate clays more than three-dimensional poly-anionic materials, but which results in a structure that is even more similar to a rare hydrous calcium carbonate phase--a finding which suggests the existence of semi-crystalline hydrous pre-cursor phases to the dehydrated scheelite material. An interatomic potential model was derived for CaWO₄ which adequately reproduces structural and physical properties of the material and is in good agreement with the DFT calculations in respect of the structure and energy of hydration (DFT: 85 kJ mol⁻¹, atomistic: 105 kJ mol⁻¹). Atomistic simulations of a range of scheelite surfaces confirm the dominance of the experimental {1 0 1} and {0 0 1} cleavage planes in the morphology of the dry crystal and the presence of the experimentally found {1 0 3} and {1 0 1} surfaces in the hydrated morphology. Hydration of the surfaces shows non-Langmuir behaviour, where the interactions between surface calciums and oxygen atoms of the water molecules outweigh hydrogen-bonding to the surface oxygen atoms or intermolecularly within the water layer. The hydration energies indicate physisorption of water, ranging from 22 kJ mol⁻¹ on the {0 0 1} surface to 78 kJ mol⁻¹ on the more reactive {1 0 3} surface.     

Measurements of nitrogen-broadening coefficients in the ν3 band of the hydroperoxyl radical using a continuous wave quantum cascade laser

Mid-infrared absorption spectroscopy was applied to the detection of the hydroperoxyl radical (HO₂) in pulsed laser photolysis combined with a laser absorption kinetics reactor. The transition of the ν₃ vibrational band assigned to the O-O stretch mode around 1065 cm⁻¹ was probed with a thermoelectrically cooled, continuous wave, mid-infrared, distributed feedback quantum cascade laser (QCL). The HO₂ was generated through 355 nm photolysis of Cl₂/1,4-c-C₆H₈/O₂ mixtures. The mid-infrared absorption spectrum of the HO₂ radical was recorded between 1064 and 1065.5 cm⁻¹. The absorption line shapes were well represented by the Voigt profile. The nitrogen-broadening coefficients of the HO₂ radical at 295 K were determined for four absorption lines around 1065 cm⁻¹. Mid-infrared absorption detection using a QCL as a spectroscopic light source is a powerful method in spectroscopic and kinetics studies of the HO₂ radical.     

Interaction of O2 with Pd single crystals in the range 1-150 Torr: Oxygen dissolution and reaction

The interaction of O₂ with Pd(1 1 1), Pd(1 1 0) and Pd(1 0 0) was studied in the pressure range 1-150 Torr by the techniques of temperature programmed decomposition (TPD), Auger electron spectroscopy (AES) and low energy electron diffraction (LEED). The oxidation of Pd was rate-determined by oxygen diffusion into Pd metal followed by the diffusion into PdO once the bulk oxide layer was formed. The dissolution of oxygen atoms into Pd metal followed the Mott-Cabrera model with diffusion coefficient 10⁻¹⁶ cm² s⁻¹ at 600 K and activation energy of 60-85 kJ mol⁻¹. The bulk oxide phase was formed when a critical oxygen concentration was reached in the near-surface region. The formation of PdO was characterized by a decrease in the oxygen uptake rate, the complete fading of the metallic Pd LEED pattern and an atomic ratio O/Pd of 0.15-0.7 as measured by AES. The diffusion of oxygen through the bulk oxide layer again conformed to the Mott-Cabrera parabolic diffusion law with diffusion coefficient 10⁻¹⁸ cm² s⁻¹ at 600 K and activation energy of 111-116 kJ mol⁻¹. The values for the diffusion coefficient and apparent activation energy increased as the surface atom density of the single crystals increased.     

Carbon monoxide oxidation over well-defined Pt/ZrO2 model catalysts: Bridging the material gap

Four different Pt/ZrO₂/(C/)SiO₂ model catalysts were prepared by electron beam evaporation. The morphology of these samples was examined before and after the catalytic reaction by Rutherford back-scattering (RBS), transmission electron microscopy (TEM) and grazing-incidence small-angle scattering (GISAXS). The catalytic behavior of such model catalysts was compared to a conventional Pt/ZrO₂ catalyst in the CO oxidation reaction using different oxygen excess (λ = 1 and 2). The so-called material gap was observed: model catalysts were active at higher temperature (620-770 K) and resulted in higher activation energy values (E_a = 77-93 kJ mol⁻¹ at λ = 1 and 129-141 kJ mol⁻¹ at λ = 2) compared to the powdered Pt/ZrO₂ catalyst (370-470 K, E_a = 74-76 kJ mol⁻¹). This material gap is discussed in terms of diffusion limitations, reaction mechanism and apparent compensation effect. Diffusion processes seem to limit the reaction on planar samples in the reactor system that was shown to be appropriate for the evaluation of the catalytic activity of powder samples. Kinetic parameters obeyed the so-called apparent compensation effect, which is discussed in detail. Langmuir-Hinshelwood-type of reaction, between CO_ads and O_ads, was proposed as the rate-determining step in all cases. Pt particles deposited on planar structures can be used for modeling conventional powdered catalysts, even though some limitations must be taken into account.     

Removal of nickel(II) ions from aqueous solutions using the natural clinoptilolite and preparation of nano-NiO on the exhausted clinoptilolite

The natural zeolite tuff (clinoptilolite) from a Serbian deposit has been studied as adsorbent for Ni(II) ions from aqueous solutions. Its sorption capacity at 298 K varies from 1.9 mg Ni g⁻¹ (for the initial solution concentration of 100 mg Ni dm⁻³) to 3.8 mg Ni g⁻¹ (for C₀ = 600 mg Ni dm⁻³) and it increases 3 times at 338 K. The sorption is best described by the Sips isotherm model. The sorption kinetics follows the pseudo-second-order model, the activation energies being 7.44, 5.86, 6.62 and 6.63 kJ mol⁻¹ for C₀ = 100, 200, 300 and 400 mg Ni dm⁻³, respectively. The sorption involves a film diffusion, an intra-particle diffusion, and a chemical cation-exchange between the Na⁺ ions of clinoptilolite and the Ni²⁺ ions. The sorption is endothermic (ΔH° being 37.9, 33.4, 30.0, 27.7 and 24.3 kJ mol⁻¹ for C₀ = 100, 200, 300, 400 and 600 mg Ni dm⁻³, respectively) and spontaneous in the 298-338 K temperature range. Thermal treatment of the Ni(II)-loaded clinoptilolite results in the formation of spherical nano-NiO particles of approx. 5 nm in diameter which are randomly dispersed in the clinoptilolite lattice.     

Quantum chemical and RRKM calculations of reactions in the H/S/O system

Quantum chemical calculations at the MRCI/aug-cc-pV5Z level are used to describe the conversions between HSO, HOS, H + SO, S + OH and O + SH on the doublet H/S/O potential energy surface. An RRKM analysis of this multiple-well system was carried out in the temperature range 300-2000 K between 0.1 and 10 atm. At these pressures, the stabilization reaction H + SO → HSO or HOS is at the low pressure limit, and stabilization from S + OH and O + SH was not detected. The reactions S + OH → H + SO and O + SH → H + SO were found to be barrierless and very fast at room temperature (4 × 10¹⁴ and 1.5 × 10¹⁴ cm³ mol⁻¹ s⁻¹, respectively). The reaction channel O + SH → S + OH is two orders of magnitude slower than the more exothermic O + SH → H + SO reaction, although a second pathway involving direct H-abstraction (O + SH → S + OH) on the quartet surface appears as a minor channel at high temperatures.     

On the mechanism of decomposition of the benzyl radical

The C₇H₇ potential energy surface was studied from first principles to determine the benzyl radical decomposition mechanism. The investigated high temperature reaction pathway involves 15 accessible energy wells connected by 25 transition states. The analysis of the potential energy surface, performed determining kinetic constants of each elementary reaction using conventional transition state theory, evidenced that the reaction mechanism has as rate determining step the isomerization of the 1,3-cyclopentadiene, 5-vinyl radical to the 2-cyclopentene,5-ethenylidene radical and that the fastest reaction channel is dissociation to fulvenallene and hydrogen. This is in agreement with the literature evidences reporting that benzyl decomposes to hydrogen and a C₇H₆ species. The benzyl high-pressure decomposition rate constant estimated assuming equilibrium between the rate determining step transition state and benzyl is k₁(T) = 1.44 × 10¹³T^0.453exp(−38400/T) s⁻¹, in good agreement with the literature data. As fulvenallene reactivity is mostly unknown, we investigated its reaction with hydrogen, which has been proposed in the literature as a possible decomposition route. The reaction proceeds fast both backward to form again benzyl and, if hydrogen adds to allene, forward toward the decomposition into the cyclopentadienyl radical and acetylene with high-pressure kinetic constants k₂(T) = 8.82 × 10⁸T^1.20exp(1016/T) and k₃(T) = 1.06 × 10⁸T^1.35exp(1716/T) cm³/mol/s, respectively. The computed rate constants were then inserted in a detailed kinetic mechanism and used to simulate shock tube literature experiments.     

Study on the interaction of La with bovine serum albumin at molecular level

The interaction of La³⁺ to bovine serum albumin (BSA) has been investigated mainly by fluorescence spectra, UV-vis absorption spectra, and circular dichroism (CD) under simulative physiological conditions. Fluorescence data revealed that the quenching mechanism of BSA by La³⁺ was a static quenching process and the binding constant is 1.75×10⁴ L mol⁻¹ and the number of binding sites is 1 at 289 K. The thermodynamic parameters (ΔH=−20.055 kJ mol⁻¹, ΔG=−23.474 kJ mol⁻¹, and ΔS=11.831 J mol⁻¹ K⁻¹) indicate that electrostatic effect between the protein and the La³⁺ is the main binding force. In addition, UV-vis, CD, and synchronous fluorescence results showed that the addition of La³⁺ changed the conformation of BSA.     

Pressure and temperature dependence of the reaction of vinyl radical with alkenes II: Measured rates and predicted product distributions for vinyl + propene

This work reports measurements of the absolute rate coefficients and Rice-Ramsperger-Kassel-Markus (RRKM) master equation (ME) simulations of the C₂H₃ + C₃H₆ reaction. Direct kinetic studies were performed over a temperature range of 300-700 K and pressures of 15, 25, and 100 Torr. Vinyl radicals were generated by laser photolysis of vinyl iodide at 266 nm, and time-resolved absorption spectroscopy was used to probe vinyl radicals through absorption at 423.2 nm. A weighted modified Arrhenius fit to the experimental rate constant is k₁ = (1.3 ± 0.2) × 10⁻¹² cm³ molecule⁻¹ s⁻¹(T/1000)^1.6 exp[−(1510 ± 80/T)]. Fifteen stationary points and 48 transition states on the C₅H₉ potential energy surface (PES) were calculated using the G3 method in Gaussian 03. RRKM/ME simulations were performed using VariFlex on a simplified PES to predict pressure dependent rate coefficients and branching fractions for the major channels. For temperatures between 350 and 700 K, the calculated rate coefficient agrees with the experimental rate coefficient within 20%. At low temperatures, the primary products are the initial adducts 4-penten-2-yl and 2-methyl-3-buten-1-yl. At higher temperatures, the dominant products are 1,3-butadiene + methyl, allyl + ethene, and 1,3-pentadiene + H. Although C₂H₃ + C₃H₆ → allyl + ethene is thermodynamically favored, the simulations predict that it does not become the dominant product until 1700 K.     

Thermodynamics of nitrogen adsorption on the zeolite H-FER

Adsorption (at a low temperature) of nitrogen on the protonic zeolite H-FER results in hydrogen bonding of the adsorbed N₂ molecules with the zeolite Si(OH)Al Brønsted acid groups. This hydrogen bonding interaction leads to activation, in the IR, of the fundamental NN stretching mode, which appears at 2331 cm⁻¹. From the infrared spectra taken over a temperature range, while simultaneously recording integrated IR absorbance, temperature and nitrogen equilibrium pressure, the thermodynamics of the adsorption process was studied. The standard adsorption enthalpy and entropy resulted to be ΔH° = −20(±1) kJ mol⁻¹ and ΔS° = −131(±10) J mol⁻¹ K⁻¹, respectively.     

A theoretical and matrix-isolation FT-IR investigation of the conformational landscape of N-acetylcysteine

The conformational landscape of N-acetylcysteine (NAC) has been investigated by a combined experimental matrix-isolation FT-IR and theoretical methodology. This combination is a powerful tool to study the conformational behavior of relatively small molecules. Geometry optimizations at the HF/3-21 level resulted in 438 different geometries with an energy difference smaller than 22 kJ mol⁻¹. Among these, six conformations were detected with a relative energy difference smaller than 10 kJ mol⁻¹ at the DFT(B3LYP)/6-31++G∗∗ level of theory. These were finally subjected to MP2/6-31++G∗∗ optimizations which resulted in five minima. The vibrational and thermodynamical properties of these conformations were calculated at both the DFT and MP2 methodologies. Experimentally NAC was isolated in an argon matrix at 16 K after being sublimated at 323 K. The most stable MP2 form appeared to be dominant in the experimental spectra but the presence of three other conformations with ΔE_MP2 < 10 kJ mol⁻¹ was also demonstrated. The experimentally observed abundance of the H-bond containing conformations appeared to be in good accordance with the predicted MP2 value.     

High resolution analysis of the rotational levels of the (0 0 0), (0 1 0), (1 0 0), (0 0 1), (0 2 0), (1 1 0) and (0 1 1) vibrational states of SO2

A high resolution (0.0018 cm⁻¹) Fourier transform instrument has been used to record the spectrum of an enriched ³⁴S (95.3%) sample of sulfur dioxide. A thorough analysis of the ν₂, 2ν₂ − ν₂, ν₁, ν₁ + ν₂ − ν₂, ν₃, ν₂ + ν₃ − ν₂, ν₁ + ν₂ and ν₂ + ν₃ bands has been carried out leading to a large set of assigned lines. From these lines ground state combination differences were obtained and fit together with the existing microwave, millimeter, and terahertz rotational lines. An improved set of ground state rotational constants were obtained. Next, the upper state rotational levels were fit. For the (0 1 0), (1 1 0) and (0 1 1) states, a simple Watson-type Hamiltonian sufficed. However, it was necessary to include explicitly interacting terms in the Hamiltonian matrix in order to fit the rotational levels of the (0 2 0), (1 0 0) and (1 0 1) states to within their experimental accuracy. More explicitly, it was necessary to use a ΔK = 2 term to model the Fermi interaction between the (0 2 0) and (1 0 0) levels and a ΔK = 3 term to model the Coriolis interaction between the (1 0 0) and (0 0 1) levels. Precise Hamiltonian constants were derived for the (0 0 0), (0 1 0), (1 0 0), (0 0 1), (0 2 0), (1 1 0) and (0 1 1) vibrational states.     

Binding of rare earth metal complexes with an ofloxacin derivative to bovine serum albumin and its effect on the conformation of protein

The water-soluble Pr (Ⅲ) and Nd (Ⅲ) complexes with an ofloxacin derivative have been prepared and characterized. The single-crystal X-ray diffraction showed that the Pr (III) and Nd (III) complexes have the similar molecular structure. Under physiological pH condition, the effects of [PrL(NO₃)₂(CH₃OH)](NO₃) and [NdL(NO₃)₂(CH₃OH)](NO₃) on bovine serum albumin (BSA) were examined using fluorescence spectroscopy in combination with UV-vis absorbance and circular dichroism (CD) spectra. The result reveals that the quenching mechanism of fluorescence of BSA by two complexes is a static quenching process and the number of binding sites is about 1 for both. The thermodynamic parameters (ΔH=−14.52 kJ mol⁻¹, ΔS=56.54 J mol⁻¹ K⁻¹ for [PrL(NO₃)₂(CH₃OH)](NO₃) and ΔH=−24.63 kJ mol⁻¹, ΔS=22.07 J mol⁻¹ K⁻¹ for [NdL(NO₃)₂(CH₃OH)](NO₃)) indicate that hydrophobic and electrostatic interactions are the main binding force in the complexes-BSA system. The binding average distance between complexes and BSA was obtained on the basis of Förster's theory. In addition, it was proved by the CD spectra that the BSA secondary structure was changed in the presence of complexes in an aqueous solution.     

Kinetic studies of chlorobenzene reactions with hydrogen atoms and phenyl radicals and the thermochemistry of 1-chlorocyclohexadienyl radicals

Atomic H and Cl were monitored by time-resolved resonance spectroscopy in the vacuum ultraviolet, following 193 nm laser flash photolysis of C₆H₅Cl and mixtures with NH₃, over 300-1020 K and with Ar bath gas pressures from 30 to 440 mbar. Below 550 K simple exponential decays of [H] were observed, and attributed to addition to form chlorocyclohexadienyl radicals. This addition was reversible over 550-630 K and the equilibrium constant was determined by a third law approach. The addition rate constant can be summarized as (1.51 ± 0.11) × 10⁻¹¹exp((−1397 ± 29)/T) cm³ molecule⁻¹ s⁻¹ (300-630 K, 1σ uncertainties), and the C-H bond dissociation enthalpy in 1-chlorocyclohexadienyl was determined to be 108.1 ± 3.3 kJ mol⁻¹ at 298 K. At higher temperatures the photolysis of chlorobenzene yielded H atoms, which is attributed to the reaction of phenyl with chlorobenzene with a rate constant of (4.5 ± 1.8) × 10⁻¹⁰exp((−4694 ± 355)/T) cm³  molecule⁻¹ s⁻¹ over 810-1020 K. These and other reaction pathways are discussed in terms of information about the potential energy surface obtained via B3LYP/6-311G(2d,d,p) density functional theory.     

The water-silicas interfacial interaction energies

The water-silicas interfacial interaction energies were calculated for samples of quartz, silicas and silicas outgassed at high temperatures using own and published data of the spreading pressure of water, its surface tension, its contact angle and using formulas obtained by the combination of the Young equation with a general equation of pair interaction. The values obtained for 18 different samples were in the range 7.80-6.92 kJ mol⁻¹. Lower values of energies are for samples that contain relatively less amounts of water at P/P₀ = 0.25 and are characterized also by relatively low values of surface pressures.     

Heat capacities of the electron acceptor 7,7,8,8-tetracyano- quinodimethane (TCNQ) and its radical-ion salt NH4(TCNQ) showing spin-Peierls transition

Heat capacities of the electron acceptor 7,7,8,8-tetracyanoquinodimethane (TCNQ) and its radical-ion salt NH₄-TCNQ have been measured at temperatures in the 12-350 K range by adiabatic calorimetry. A λ-type heat capacity anomaly arising from a spin-Peierls (SP) transition was found at 301.3 K in NH₄-TCNQ. The enthalpy and entropy of transition are Δ_trsH=(667±7) J mol⁻¹ and Δ_trsS=(2.19±0.02) J K⁻¹ mol⁻¹, respectively. The SP transition is characterized by a cooperative coupling between the spin and the phonon systems. By assuming a uniform one-dimensional antiferromagnetic (AF) Heisenberg chains consisting of quantum spin (S=1/2) in the high-temperature phase and an alternating AF nonuniform chains in the low-temperature phase, we estimated the magnetic contribution to the entropy as Δ_trsS_mag=0.61 J K⁻¹ mol⁻¹ and the lattice contribution as Δ_trsS_lat=1.58 J K⁻¹ mol⁻¹. Although the total magnetic entropy expected for the present compound is R ln 2 (=5.76 J K⁻¹ mol⁻¹), a majority of the magnetic entropy (∼4.6 J K⁻¹ mol⁻¹) persists in the high-temperature phase as a short-range-order effect. The present thermodynamic investigation quantitatively revealed the roles played by the spin and the phonon at the SP transition. Standard thermodynamic functions of both compounds have also been determined.