Determination of barium in sulphide ores, concentrates and other geological samples by flame atomic-absorption spectrometry

A rapid, precise and selective analytical method has been developed for estimation of barium in geological samples by flame atomic-absorption spectrometry. The method consists of precipitation of barium sulphate with ammonium sulphate, followed by dissolution of the sulphates in EDTA at pH 10. The barium in this solution is measured by AAS with a nitrous oxide-acetylene flame. Appreciable amounts of lead, calcium and strontium can be tolerated in the method, which has been applied for estimation of barium in sulphide ores and concentrates of lead, zinc and copper, and is feasible for estimation of barium from 20.0 ppm to the per cent level in such geological samples.     

Complexometric estimation of ferric iron

Summary Ferric iron has been determined alone or in presence of barium chloride, calcium chloride, magnesium sulphate, mercuric chloride, manganese sulphate, strontium nitrate, chromic sulphate or zinc sulphate by titrating it with EDTA, using potassium thiocyanate-p-anisidine indicator. In these complexometric titrations, the quantitative results obtained by using potassium thiocyanate-p-anisidinie indicator are comparable with those obtained with Bindschedler's green indicator; and the metallic salts mentioned above do not interfere in the estimation of ferric iron by this method.     

Potentiometrische Titration von Sulfat, Barium und Strontium mit Hilfe einer bleisensitiven Elektrode

Zusammenfassung Die bleisensitive Elektrode der Fa. Orion spricht neben Bleiionen auch auf Sulfationen an. Dies ermöglicht die potentiometrische Titration von Sulfat mit Bariumperchlorat sowie die Titration von Barium und Strontium mit Natriumsulfat. Der günstigste pH-Bereich liegt zwischen 5 und 7. Titriermedium sind Dioxan-Wasser-Gemische. Die Verfahren sind sehr empfindlich und erlauben in allen Fällen die Titration bis herab zu 5·10^–4 mMol.Anwendungsbeispiele für die Bestimmung von Schwefel in organischen Verbindungen nach Schöniger- oder Wickbold-Verbrennung sind angegeben.

---

Potentiometric titration of sulphate, barium and strontium by means of a lead-sensitive electrode

The Orion lead electrode was found to be responsive not only to lead ions but to sulphate ions, too. This offers possibilities to titrate sulphate with barium perchlorate and reversely barium and strontium with sodium sulphate. The useful pH range is 5–7. Dioxan-water mixtures serve as solvents. The described methods are highly sensitive and allow determinations down to 5×10^–4 millimoles.Examples are given for the determination of sulphur in organic samples after combustion according to Schöniger or Wickbold.

     

A study of the Arrhenius behavior of the co-precipitation of radium, barium and strontium sulfate

Co-precipitation of radium, barium and strontium is an important process in many contexts, such as uranium mining, oil extraction and in the safety assessment of a final repository for used nuclear fuel. Co-precipitation to a solid solution is possible since radium, barium and strontium act as chemical analogues. In this work the co-precipitation of radium, barium and strontium was studied and the kinetic behavior of the co-precipitation process was investigated. It was shown that radium, barium and strontium co-precipitate congruently and that the precipitation followed an Arrhenius behavior and the Arrhenius parameters for the systems was determined. When studying the differences of the Arrhenius constants by using a student t test (95 % confidence interval) it was observed that the only significant difference in the activation energy, E _a, is between radium and barium and between radium and strontium respectively, the pure strontium having the larger activation energy in comparison. This is most likely coupled to the metal ion size; since the hydration waters are more strongly bound, which leads to them having a slower exchange rate, which in turn effects the rate of co-precipitation to the metal these reactions will be slower.     

Indirect flame photometric determination of sulphate ions

In this paper the possibilities have been studied of determining sulphate ions by indirect flame photometry by difference. Barium and Strontium in constant concentration were used as background elements. By means of the methods proposed sulphate ions can be determinined in the concentration range 0 to 70 p.p.m. with barium and 0 to 110 p.p.m. with strontium. The determinations can be carried out in dilute solutions of alkali metal sulphates and sulphate ions can also be estimated in the presence of macroquantities of other compounds. This may prove useful for the quantitative estimation of sulphate as an impurity in Chemical reagents. Some examples are given of the determination of the degree of purity of substances containing sulphate as impurities.     

Thermal decomposition of iron(II) sulphate heptahydrate in air in the presence of calcium,strontium and barium carbonates

The thermal decomposition in air of iron(II) sulphate heptahydrate in the presence of calcium, strontium and barium carbonates has been carried out. The decomposition path varies from carbonate to carbonate. Also, these decompositions are different from those of basic beryllium carbonate and basic magnesium carbonate. The results obtained for the kinetics of thermal decomposition have also been presented.     

Application of displacement reactions in flame photometry-II Emission flame photometric determination of alkaline earth metals in the presence of interfering anions

For the emission flame photometric determination of strontium and barium in the presence of interfering ions such as phosphate, sulphate, arsenate and oxalate, calibration or simple standard addition methods cannot be used. Greatly reduced errors can be achieved by dividing the sample solution into four equal parts and adding to each certain known amounts of two metal ions. One of these is identical to the determinand (e.g., strontium or barium) the other has similar characteristics to it (e.g., calcium). The amounts of these metals are chosen so that the total (molar) concentration of these should be identical in all solutions, but the ratio of the concentrations of the two metals should be different. The emission of the determinand metal must be measured, and a standard addition plot produced. The amount of determinand present in the sample can be obtained from the intersection of the emission vs. concentration line with the concentration axis.     

脑卒中患者血清中钒钼钡铝锶水平的探讨

对１１０名脑卒中患者与对照组血清中钒、钼、钡、铝、锶的含量比较，结果显示：血清锶和钡的含量升高；血清钡和钼的含量降低；而血清铝的含量未见差异。     

Hydrothermally assisted complex polymerization method for barium strontium titanate powder synthesis

Barium strontium titanate was obtained by hydrothermal treatment of barium strontium titanate citric precursor solution, previously prepared by complex polymerization method. The thermally induced phase evolution was followed at various temperatures up to 800 °C using thermogravimetric and differential thermal analysis, X-ray diffraction analysis, and Raman spectroscopy. Microstructural characterization of barium strontium titanate powders was performed by scanning and transmission electron microscopy. The proposed synthesis route has been proven as a better and faster method for barium strontium titanate powder preparation as compared to the conventional complex polymerization route. The method was found efficient for production of low agglomerated, fine, nanosized barium strontium titanate powder with well defined stoichiometry, and sub-micron particle size. The results of structural and microstructural characterization showed the complete crystallization of carbonate-free barium strontium titanate powder at 700 °C with an average size of crystallites below 50 nm.     

Spectrophotometric study of the reactions of arsenazo III with alkaline-earth metals

Arsenazo III is used as a spectrophotometric reagent for alkaline-earth metals. The molar absorptivities of the calcium, strontium and barium complexes at 650 nm are 4.40 x 10(4), 4.00 x 10(4) and 3.65 x 10(4) l.mole(-1).cm(-1) respectively. The interference of magnesium is eliminated at pH 5-6. The use of sodium sulphate as masking agent permits the determination of small amounts of calcium, strontium and magnesium in the presence of barium. The alkaline-earth ions can be determined in the presence of each other at pH 4.2 at the 2-10 mug level. Some organic solvents such as dioxan, acetone and ethanol increase the sensitivity and selectivity in acidic medium. The stability constants have been measured and the structure of the complexes is discussed.     

Emission intensity of strontium and barium in flames of various gas compositions

The emission intensity of strontium at 460.7 mμ and barium at 553.6 mμ has been studied in hydrogen flames burning with varying mixtures of oxygen and nitrogen. With solutions of barium and strontium chloride in water and in various concentrations of EDTA, acetic and hydrochloric acids, it was found that the emission depended significantly on the oxygen: nitrogen ratio in the atomizing gas. Under some conditions, maximum emission intensity is found at compositions intermediate between air and pure oxygen. The emission of barium was found to be decreased significantly by EDTA at high pH under some flame conditions.     

Thermogravimetric investigation of the alkaline earth diliturates

Thermolysis curves for calcium, strontium and barium diliturates were obtained. Calcium dilituratc forms an octahydrate from aqueous solution while strontium, dilituratc forms a. heptahydrate and barium diliturate forms a tetrahydrate.Methods for the thermogravimetrie determination of strontium and barium were developed and found to be quite accurate; calcium can only be determined semi-qnartitatively by precipitation as the diliturate salt.     

Precipitation of barium chromate from homogeneous solution using complexation and replacement A separation of barium from relatively large amounts of strontium and lead

A new procedure is presented that efficiently separates barium from relatively large amounts of strontium and lead. The barium is precipitated as the chromate from a solution in which the multivalent cations are complexed with EDTA. The barium ions are homogeneously released in solution when magnesium ions are slowly introduced into the solution. The magnesium ions gradually replace the barium ions from their EDTA complexes, bringing about a precipitation of barium chromate from homogeneous solution.

This slow formation of barium chromate crystals holds co-precipitation to a minimum and produces crystals that are easily filtered and washed. More than 99.7% of the barium can be precipitated as the chromate, with less than 0.6% of the strontium, when the two ions are in equal molar concentration.     

Novel monomeric barium complexes as volatile precursors for chemical vapour deposition

A new range of barium complexes with single encapsulating ligands have been prepared for use in chemical vapour deposition (CVD). A novel pathway providing an unprecedented sequence of barium carbamates is reported. New dianionic bis β-ketoesterates and their barium, strontium and calcium derivatives were synthesised. High resolution mass spectrometry showed some barium derivatives to be monomeric, and preliminary testing indicated some volatility in these species. Calcium and strontium complexes were found to have nuclearities that varied according to their ionic radii relative to the chain length of the encapsulating ligand.     

过敏性哮喘患者血清中钙镁钡铝锶含量的研究

３４例过敏性哮喘患者血清中钙、镁、钡、铝、锶的含量与对照组比较，结果显示（１）钙的含量明显下降，Ｐ＜０．０１；（２）钡和锶的含量升高，差异有显著性和高度显著性，Ｐ＜０．０５和Ｐ＜０．０１；（３）镁和铝的含量差异无显著性，Ｐ＞０．０５。     

Application of an intensified narrow channel reactor to the aqueous phase precipitation of barium sulphate

A homogeneous liquid phase reaction between barium chloride (BaCl(2)) and sodium sulphate (Na(2)SO(4)) was conducted in a narrow channel reactor to produce barium sulphate (BaSO(4)) precipitate. The effects of channel dimensions and channel residence times on crystal size, crystal size distribution, nucleation rates, crystal morphology and conversion of reactants were investigated at different levels of reactant supersaturation ratio. Our results indicate that the smallest particle sizes are favoured when supersaturation ratios and channel velocities are high. The minimum average particle diameter observed was approximately 0.2 microm in a channel of hydraulic diameter 0.5 mm and length 20 cm at an initial supersaturation ratio of 4483 (0.1 M), which correspond to conditions giving rise to the highest nucleation rates. It has also been observed that particle size depends on the conversion to product, the smallest particles being formed when conversion lies within the range of 30 to 40%. Conversions in excess of 60% have been reached but there is a detectable limiting effect with increased supersaturation and reduced residence times. Experiments conducted at similar levels of supersaturation under stirred tank conditions showed that particle size was consistently larger and particle size distribution was much broader than that achieved in the narrow channel reactor. Scanning electron microscopy (SEM) images of the crystals formed in the narrow channels show that spherical particles dominate in the smallest channels at high velocities whilst coarse, tabular crystals are obtained in the larger channels. Greater tendency to agglomerate is also observed at high supersaturation ratios, after one minute of reaction.     

Preliminary round-robin studies on the ICTAC certified reference materials for DTA

The ICTAC Committee on Standardisation has formed a Task Group to investigate the suitability of the ICTAC Certified Reference Materials for DTA, covering the temperature range 450°–1100°C, for accurate temperature calibration purposes and to evaluate their potential as enthalpy calibrants for DTA and DSC equipment. This paper reports the results of preliminary round-robin studies on barium carbonate and strontium carbonate, using a dual-point calibration method based on the melting points of aluminium and gold. In addition the fusion of ICTAC potassium sulphate has been investigated as a possible calibration transition.     

有机试剂对锶火焰原子吸收光谱分析的增感机理

研究了火焰原子吸收光谱法中甲醇、甲醛、甲酸等6种有机试剂对元素Sr的增感行为,发现甲酸效果最佳。在选定的相对最佳条件下,增感效果高达70%。研究表明,甲酸所产生的增感效应主要在于其与Sr形成甲酸锶,改变了常规原子化机理,提高了火焰原子化效率。这一机理同样适用于甲酸存在下Ca、Ba等元素的火焰原子化。实验表明,甲酸对这两种碱土元素的增感效果分别达到54%和55%。甲酸对Sr的增感应用于高纯BaCO3中Sr含量测定,回收率达到100%～106%。     

Formation and filtration characteristics of solids generated in a high level liquid waste treatment process

The solids formation behavior in a simulated high level liquid waste (HLLW) was experimentally examined, when the simulated HLLW was treated in the ordinary way of actual HLLW treatment process. Solids formation conditions and mechanism were closely discussed. The solids formation during a concentration step can be explained by considering the formation of zirconium phosphate, phosphomolybdic acid and precipitation of strontium and barium nitrates and their solubilities. For the solids formation during the denitration step, at least four courses were observed; formation of an undissolved material by a chemical reaction with each other of solute elements (zirconium, molybdenum, tellurium) precipitation by reduction (platinum group metals) formation of hydroxide or carbonate compounds (chromium, neodymium, iron nickel, strontium, barium) and a physical adsorption to stable solid such as zirconium molybdate (nickel, strontium, barium).     

Determination of rubidium, strontium and barium in barite by atomic-absorption spectrometry after dissolution in disodium ethylenediaminetetra-acetate

A simple and rapid method is described for determining up to 50% of barium, approximately 350 mug/g or more of strontium and approximately 1 mug/g or more of rubidium in barite samples. The method involves dissolution of the barite by refluxing with an ammoniacal disodium EDTA solution. For the determination of total strontium and rubidium, the silicate residue remaining is filtered off and decomposed with hydrofluoric and sulphuric acids to recover residual strontium and rubidium. Barium and strontium are subsequently determined by flame atomic-absorption spectrometry and rubidium is determined by graphite-furnace atomic-absorption spectrometry. Results obtained for barium and strontium in several barites by the proposed method are compared with those obtained by wavelength-dispersive and energy-dispersive X-ray fluorescence spectrometry, respectively. The method is reliable and more rapid than conventional methods.