Deposition of gallium oxide nanodots prepared from metal‐assembling dendrimer molecules isolated by the spacing of the nonmetal‐assembling dendrimer molecules in the two‐dendrimers mixture monolayer

Phenylazomethine dendrimers (DPA) can precisely incorporate metal chlorides onto the imine sites in a stepwise fashion. Such precise dendrimer–metal complexes allow the preparation of size‐controlled subnanometer metal particles. We now propose a novel approach for the fabrication of size‐controlled subnanometer metal oxide dots isolated on a substrate using two different‐type dendrimers. One is a fourth‐generation phenylazomethine dendrimer (DPAG4) and the other is a benzylether dendrimer (BzEG3) with a zinc porphyrin core. Even though the diameter of BzEG3 corresponds to that of DPAG4, BzEG3 has no metal‐complexing site. Upon dip coating on a highly oriented pyrolytic graphite substrate by the mixed solution of the metal chloride‐assembling DPAG4 molecules and BzEG3 molecules, the dendrimer monolayer was immobilized on the substrate. The concentration of the dendrimer mixture was determined in order to separate each DPAG4–metal chloride complex molecule by BzEG3. Monodispersed metaloxide nanodot arrays could be obtained from the dendrimer monolayer in which DPAG4–metal chloride complex molecule is well isolated by the BzEG3 as a spacer after the hydrolysis of metal chlorides followed by the complete removal of dendrimers. Copyright © 2013 John Wiley & Sons, Ltd.     

Fabrication of carboxymethylated cellulose fibers supporting Ag NPs@MOF‐199s nanocatalysts for catalytic reduction of 4‐nitrophenol

In this work, we prepared high‐performance and recyclable nanocatalysts that consist of small and well‐dispersed silver nanoparticles (Ag NPs) immobilized onto Cu‐ based metal–organic framework (MOF‐199 s) supported by carboxymethylated cellulose fibers (CCFs). The as‐prepared green nanohybrid catalysts, namely Ag NPs@ MOF‐199 s/CCFs, were characterized using SEM, TEM, XRD and FT‐IR techniques. The catalytic performances showed that Ag NPs@ MOF‐199 s/CCFs catalysts exhibited a very high catalytic efficiency towards the reduction of 4‐nitrophenol to 4‐aminophenol. The enhanced catalytic performances are attributed to the improved dispersity, small particles of Ag NPs stabilized by the MOF‐199 s, and the porous catalyst structures. The introduction of cellulose fiber further facilitates the reuse and sustainability of the nanohybrid catalysts, showing a stable and high reusability (more than 91% of catalytic activity) even after five runs.     

Metallo‐supramolecular Crosslinked Polyurethanes

The effects of incorporating metal‐binding ligands as chain extenders in polyurethane elastomers were investigated. Segmented polyurethanes based on 2 kDa poly(tetramethylene oxide) (PTMO) and 4,4‐methylenebis(cyclohexyl isocyanate) were polymerized using a two‐step process in which 2,6‐bis(1‐ethyl‐5‐(methoxymethyl)‐1H‐benzo[d]imidazol‐2‐yl)pyridine was added as a chain extender. The resulting polyurethanes were then metallated using stoichiometric amounts of Zn(II) metal salts with different counterions. The resulting metallopolymers have substantially improved Young's moduli, increased failure stress, and improved thermomechanical behavior. The materials were microphase‐separated into anisotropic hard domains within a PTMO matrix. Simultaneous small‐angle X‐ray scattering and tensile testing revealed the minority hard segment domains remain relatively intact during elongation, likely due to the strength of the metal–ligand complex. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1744–1757     

Crystal Structure of Metallo DNA Duplex Containing Consecutive Watson–Crick‐like T–HgII–T Base Pairs

The metallo DNA duplex containing mercury‐mediated T–T base pairs is an attractive biomacromolecular nanomaterial which can be applied to nanodevices such as ion sensors. Reported herein is the first crystal structure of a B‐form DNA duplex containing two consecutive T–Hg^II–T base pairs. The Hg^II ion occupies the center between two T residues. The N3‐Hg^II bond distance is 2.0 Å. The relatively short Hg^II‐Hg^II distance (3.3 Å) observed in consecutive T–Hg^II–T base pairs suggests that the metallophilic attraction could exist between them and may stabilize the B‐form double helix. To support this, the DNA duplex is largely distorted and adopts an unusual nonhelical conformation in the absence of Hg^II. The structure of the metallo DNA duplex itself and the Hg^II‐induced structural switching from the nonhelical form to the B‐form provide the basis for structure‐based design of metal‐conjugated nucleic acid nanomaterials.     

Physicochemical and Electrophysical Properties of Metal/Semiconductor Containing Nanostructured Composites

The properties of nanostructured composites based on metal oxides and metal–polymer materials are analyzed, along with ways of preparing them. The effect the interaction between metal and semiconductor nanoparticles has on the conductivity, photoconductivity, catalytic activity, and magnetic, dielectric, and sensor properties of nanocomposites is discussed. It is shown that as a result of this interaction, a material can acquire properties that do not exist in systems of isolated particles. The transfer of electrons between metal particles of different sizes in polymeric matrices leads to specific dielectric losses, and to an increase in the rate and a change in the direction of chemical reactions catalyzed by these particles. The interaction between metal-oxide semiconductor particles results in the electronic and chemical sensitization of sensor effects in nanostructured composite materials. Studies on creating molecular machines (Brownian motors), devices for magnetic recording of information, and high-temperature superconductors based on nanostructured systems are reviewed.     

Catalytic properties of transition metal salts immobilized on nanoporous silica polyamine composites II: hydrogenation

The transition metal compounds Pd(OAc)₂, RhCl₃·4H₂O and RuCl₃ · nH₂O were adsorbed onto the nanoporous silica polyamine composite (SPC) particles (150–250 µm), WP‐1 [poly(ethyleneimine) on amorphous silica], BP‐1 [poly(allylamine) on amorphous silica], WP‐2 (WP‐1 modified with chloroacetic acid) and BP‐2 (BP‐1 modified with chloroacetic acid). Inductively coupled plasma‐atomic emission spectrometry analysis of the dried samples after digestion indicated metal loadings of 0.4–1.2 mmol g^?1 except for RhCl₃·4H₂O on BP‐2 which showed a metal loading of only 0.1 mmol g^?1. The metal loaded composites were then screened as hydrogenation catalysts for the reduction of 1‐octene, 1‐decene, 1‐hexene and 1, 3‐cyclohexadiene at a hydrogen pressure of 5 atm in the temperature range of 50–90 °C. All 12 combinations of SPC and transition metal compound proved active for the reduction of the terminal olefins, but isomerization to internal alkenes was competitive in all cases. Under these conditions, selective hydrogenation of 1,3‐cyclohexadiene to cyclohexene was observed with some of the catalysts. Turnover frequencies were estimated for the hydrogenation reactions based on the metal loading and were in some cases comparable to more conventional heterogeneous hydrogenation catalysts. Examination of the catalysts before and after reaction with X‐ray photoelectron spectroscopy and transmission electron microscopy revealed that, in the cases of Pd(OAc)₂ on WP‐2, BP‐1 and BP‐2, conversion of the surface‐ligand bound metal ions to metal nano‐particles occurs. This was not the case for Pd(OAc)₂ on WP‐1 or for RuCl₃ · nH₂O and RhCl₃· 4H₂O on all four composites. The overall results are discussed in terms of differences in metal ion coordination modes for the composite transition‐metal combinations. Suggested ligand interactions are supported by solid state CPMAS ¹³C NMR analyses and by analogy with previous structural investigations of metal binding modes on these composite materials. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis of Supported Ultrafine Non‐noble Subnanometer‐Scale Metal Particles Derived from Metal–Organic Frameworks as Highly Efficient Heterogeneous Catalysts

The properties of supported non‐noble metal particles with a size of less than 1 nm are unknown because their synthesis is a challenge. A strategy has now been created to immobilize ultrafine non‐noble metal particles on supports using metal–organic frameworks (MOFs) as metal precursors. Ni/SiO₂ and Co/SiO₂ catalysts were synthesized with an average metal particle size of 0.9 nm. The metal nanoparticles were immobilized uniformly on the support with a metal loading of about 20 wt %. Interestingly, the ultrafine non‐noble metal particles exhibited very high activity for liquid‐phase hydrogenation of benzene to cyclohexane even at 80 °C, while Ni/SiO₂ with larger Ni particles fabricated by a conventional method was not active under the same conditions.     

Assembly of a Metal–Organic Framework into 3 D Hierarchical Porous Monoliths Using a Pickering High Internal Phase Emulsion Template

3D Hierarchical porous metal–organic framework (MOF) monoliths are prepared by using Pickering high internal phase emulsion (HIPE) template. Pickering HIPEs were stabilized solely by UiO‐66 MOF particles with internal phase up to 90 % of the volume. The effects of internal phase type and volume, as well as MOF particle concentration on the stability of resulting Pickering HIPEs were investigated. Furthermore, by adding small amount of polyvinyl alcohol (PVA) as binder or polymerization in the continuous aqueous phase, followed by freeze‐drying, two types of MOF‐based 3D hierarchical porous monoliths with ultralow density (as low as 12 mg cm^?3) were successfully prepared. This Pickering HIPE template approach provides a facile and practical way for assembling of MOFs into complex structures.     

Adsorption of glycidoxypropyl‐trimethoxy‐silane on α and β phases of titanium alloy Ti–6.5Al–1Mo–1V–2Zr

The adsorption of glycidoxypropyl‐trimethoxy‐silane (GTMS) on α and β phases of titanium alloy Ti–6.5Al–1Mo–1V–2Zr was studied. The morphology and composition of coated alloy were investigated by using field‐emission scanning electron microscopy, energy dispersive spectroscopy, and atomic force microscopy. The quantitative characterization of GTMS adsorption was carried out by using XPS. The results showed that the β phase particles exhibited better ability to adsorb GTMS molecules than the α phase, especially at lower concentrations of GTMS, which resulted in a relatively nonuniform silane coating. The differences in the adsorption ability between the α phase and β phase particles were attributed to the different alloying elements contained in them and different characteristics of the oxides formed on them. Uniform adsorption of GTMS on the overall metal surface was achieved by increasing the concentration of GTMS to 1 vol.%. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of Spin‐Crossover Nano‐ and Micro‐objects in Homogeneous Media

New methods are proposed for the synthesis of spin‐crossover nano‐ and micro‐objects. Several nano‐objects that are based upon the spin‐crossover complex [Fe(hptrz)₃](OTs)₂ (hptrz=4‐heptyl‐1,2,4‐triazole, Ts=para‐toluenesulfonyl) were prepared in homogeneous media. The use of various reagents (Triton X‐100, PVP, TOPO, and PEGs of different molecular weights) as stabilizing agents yielded materials of different size (6 nm–2 μm) and morphology (nanorods, nanoplates, small spherical particles, and nano‐ and micro‐crystals). In particular, when Triton X‐100 was used, a variation in the morphology from nanorods to nanoplates was observed by changing the nature of the solvent. Interestingly, the preparation of the nanorods and nanoplates was always accompanied by the formation of small spherical particles. Alternatively, when PEG was used, 200–400 nm crystals of the complex were obtained. In addition, a very promising polymer‐free synthetic method is discussed that was based on the preparation of relatively stable Fe^II–triazole oligomers in CHCl₃. Their specific treatment led to micro‐crystals, small nanoparticles, or gels. The size and morphology of all of these objects were characterized by TEM and by dynamic light scattering (DLS) where possible. Their spin‐crossover behavior was studied by optical and magnetic measurements. The spin‐transition features for large particles (>100 nm) were very similar to that of the bulk material, that is, close to room temperature with a hysteresis width of up to 8 K. The effects of the matrix and/or size‐reduction led to modification of the transition temperature and an abruptness of the spin transition for oligomeric solutions and small nanoparticles of 6 nm in size.     

Alkaline Earth Metal Ion Induced Coil–Helix–Coil Transition of Lysine–Coumarin–Azacrown Hybrid Foldamers with OFF–OFF–ON Fluorescence Switching

A new metal‐ion‐responsive and fluorescent foldamer, OPLM₈ , composed of eight lysine–coumarin–azacrown units, has been designed and synthesized. The flexible OPLM₈ can be forced into a well‐defined helix structure only upon the addition of alkaline earth metal ions. The structural change is based on the crown ether moieties being positioned in the requisite arrangement along the peptide chain, that is, at i, i+4 spacing, such that the alkaline earth metal ions can mediate the formation of four sandwich complexes between them. Moreover, varying the chelator‐to‐metal‐ion ratio from 2:1 to 1:1 resulted in disassembly of the sandwich complexes leading to collapse of the helical structure to a random coil. These metal‐ion‐induced structural transitions could not only be monitored by the CD amplitude change but also easily probed by unique “OFF–OFF–ON” fluorescence intensity changes from 0.7‐fold to 14‐fold as the structure changed from the folded helix to a random coil. To further verify that the helix formation was indeed induced by metal‐ion complexation, two kinds of control octamers with only four metal‐ion chelators on the side chains were studied. One, which was capable of forming two sandwich complexes between the i and i+4 residues, displayed a negative Cotton couplet with the magnitude of its A value close to half that of OPLM₈ , and the second had four metal‐ion chelators positioned in the same turn, and hence was incapable of forming intramolecular metal complexes and showed different induced CD signals. Collectively, the photospectroscopic data and the results of the control studies suggest that alkaline earth metal ions can efficiently promote the flexible octamer OPLM₈ into a well‐organized helix by the formation of sandwich complexes between substituents at an i, i+4 spacing.     

Phenol‐Substituted Tetrapyrazinoporphyrazines: pH‐Dependent Fluorescence in Basic Media

Tetrapyrazinoporphyrazines (TPyzPzs) bearing one, two, four or eight 3,5‐di(tert‐butyl)‐4‐hydroxyphenol moieties were synthesized as zinc(II) complexes and metal‐free derivatives. The deprotonation of the phenol using tetrabutylammonium hydroxide induced the formation of a strong donor for intramolecular charge transfer that switched OFF the red fluorescence (λ_F～660 nm) of the parent zinc TPyzPzs. The changes were fully reversible for TPyzPzs with one to four phenolic moieties, and an irreversible modification was observed for TPyzPzs substituted with eight phenols. The sensors were anchored to lipophilic particles in water, and a pK_a approximately 12.5–12.7 was determined for the phenolic hydroxyl based on fluorescence changes in different buffers. In addition, a novel concept for fluorescence OFF‐ON‐OFF switching in metal‐free TPyzPzs bearing phenolic moieties upon addition of specific amounts of base was demonstrated.     

Metal‐complex formation and DNA interaction of 5, 10,15,20‐tetrakis(1‐methyl‐4‐pyridiyl)‐porphine: Study of the mechanistic aspects

The macrocyclic porphyrin 5,10,15,20‐tetrakis(1‐methyl‐4‐pyridiyl)‐porphine is studied in its ability to coordinate Cu(II) even at very low pH values and to interact, as a copper complex, with calf‐thymus (CT‐DNA). The kinetics and equilibria for metal‐ligand complexes formation are spectrophotometrically studied, particularly focussing on the mechanistic information provided by the kinetic approach. The rate constants of complex formation is much lower than that of water exchange at Cu(II); this behavior is ascribed to an equilibrium between two porphyrin populations, only one of them being reactive. Concerning the interaction of the copper–porphyrin complex (D) with CT‐DNA, it has been found that the complex binds to G–C base pairs by intercalation while forms external complex with the A–T base pairs. The kinetic results agree with a reaction mechanism that takes into account the slow shuffling from an AT‐bound form (DAT) to a GC‐bound form (DGC) of the copper complex (D), finally leading to a more stable DGC* intercalated form. Kinetic and equilibrium parameters for the copper complex binding to the nucleic acid are obtained, and the binding mechanism is discussed. A mechanism is proposed where D reacts simultaneously with (G–C) and (A–T) base pairs. The resulting bound forms interconvert according to a “shuffling” process, which involves formation of an intermediate (DGC) form. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 42: 79–89, 2010     

Ionic Liquid Assisted Synthesis of Au–Pd Bimetallic Particles with Enhanced Electrocatalytic Activity

Morphology‐ and composition‐controlled synthesis of Au–Pd bimetallic particles was realized by a facile ionic liquid assisted route at room temperature. The morphologies of the synthesized particles, such as nanoflake‐constructed spheres with a core–shell structure, nanoparticle‐constructed spheres, and nanoparticle‐constructed dendrites, could be well controlled by the present route. The ionic liquid was found to play a key role in the formation of these interesting particles. Moreover, the composition (Au:Pd) of the particles could be modulated by means of the molar ratio of the metal precursors in the feeding solutions. The Au–Pd bimetallic particles exhibit high electrocatalytic activity toward oxidation of ethanol and formic acid. Furthermore, cyclic voltammetric studies on the as‐prepared Au–Pd bimetallic particles revealed good electroactivity for H₂O₂, which results in an effective amperometric H₂O₂ sensor.     

Study on the Film Properties and Recognition for Metal Ions of Calix[4]arenes Derivative by Langmuir Monolayer

Calixarene molecules are very powerful ligand for ions and small molecules, and have been studied with several techniques as models for host‐guest systems. In this approach, the formation of Langmuir monolayer properties of three kinds calix[4]arene derivative were characterized and one of them, p‐tert‐butylthiacalix[4]arene (TCA), was chosen as object to study its Langmuir monolayer affected by different subphase conditions. The purpose of this study is to investigate the molecular recognition ability of TCA for metal ions at the water‐air interface. Changing the composition of aqueous subphase (containing various metal ion solutions respectively) produced strong variations on the monolayer parameters, indicating a different selectivity of the TCA ligand for the different metal cations. In particular, high selectivity for transition metal ions was found. Limiting area values are discussed in relation to the orientation of the cone‐shaped molecules at the water‐air interface.     

Nucleation of gold nanoparticles on latex particle surfaces

Gold particles were nucleated on functionalized (i.e., sulfonate or imidazole groups) latex particle surfaces. Gold ions were associated with the functional groups present on the surface of the latex particles by metal‐ligand formation and were then reduced to nucleate gold particles on the particle surface. The use of imidazole groups favored the metal‐ligand formation more effectively compared with sulfonic acid groups, so gold nucleation was investigated on the surface of imidazole‐functionalized model latex particles. The desorption of gold atoms or their surface migration first occurred during the reduction process and then gold nanoparticles were nucleated. The utilization of strong reductants, such as NaBH₄ and dimethylamine borane (DMAB) under mildly acidic conditions (i.e., pH 4) led to the deprotonation of imidazole‐rich polymer chains present on the surface of the model latex particles followed by deswelling of hydrophilic polymer surface layers. As a result, well‐dispersed gold nanoparticles were embedded in the hydrophilic polymer surface. On the other hand, the use of weak reductants led to the formation of localized gold aggregates on the surface of the latex particles. The removal of residual styrene monomer is very important because gold ions can be coordinated with the vinyl groups present in styrene monomer and would then be reduced by nucleophilic water addition. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 912–925, 2008     

Study of immobilized metal affinity chromatography sorbents for the analysis of peptides by on‐line solid‐phase extraction capillary electrophoresis‐mass spectrometry

Several commercial immobilized metal affinity chromatography sorbents were evaluated in this study for the analysis of two small peptide fragments of the amyloid β‐protein (Aβ) (Aβ(1–15) and Aβ(10–20) peptides) by on‐line immobilized metal affinity SPE‐CE (IMA‐SPE‐CE). The performance of a nickel metal ion (Ni(II)) sorbent based on nitrilotriacetic acid as a chelating agent was significantly better than two copper metal ion (Cu(II)) sorbents based on iminodiacetic acid. A BGE of 25 mM phosphate (pH 7.4) and an eluent of 50 mM imidazole (in BGE) yielded a 25‐fold and 5‐fold decrease in the LODs by IMA‐SPE‐CE‐UV for Aβ(1–15) and Aβ(10–20) peptides (0.1 and 0.5 μg/mL, respectively) with regard to CE‐UV (2.5 μg/mL for both peptides). The phosphate BGE was also used in IMA‐SPE‐CE‐MS, but the eluent needed to be substituted by a 0.5% HAc v/v solution. Under optimum preconcentration and detection conditions, reproducibility of peak areas and migration times was acceptable (23.2 and 12.0%RSD, respectively). The method was more sensitive for Aβ(10–20) peptide, which could be detected until 0.25 μg/mL. Linearity for Aβ(10–20) peptide was good in a narrow concentration range (0.25–2.5 μg/mL, R² = 0.93). Lastly, the potential of the optimized Ni(II)‐IMA‐SPE‐CE‐MS method for the analysis of amyloid peptides in biological fluids was evaluated by analyzing spiked plasma and serum samples.     

Tailored composite polymer–metal nanoparticles by miniemulsion polymerization and thiol‐ene functionalization

A simple and modular synthetic approach, based on miniemulsion polymerization, has been developed for the fabrication of composite polymer–metal nanoparticle materials. The procedure produces well‐defined composite structures consisting of gold, silver, or MnFe₂O₄ nanoparticles (～10 nm in diameter) encapsulated within larger spherical nanoparticles of poly(divinylbenzene) (～100 nm in diameter). This methodology readily permits the incorporation of multiple metal domains into a single polymeric particle, while still preserving the useful optical and magnetic properties of the metal nanoparticles. The morphology of the composite particles is retained upon increasing the inorganic content and also upon redispersion in organic solvents. Finally, the ability to tailor the surface chemistry of the composite nanoparticles and incorporate steric stabilizing groups using simple thiol‐ene chemistry is demonstrated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1594–1606, 2010     

Recent Advances in the Schiff Bases and N‐Heterocyclic Carbenes as Ligands in the Cross‐Coupling Reactions: A Comprehensive Review

Cross‐coupling reactions, namely, the Suzuki–Miyaura, Heck, Sonogashira, Hiyama, Negishi, Kumada, and Hartwig–Buchwald, are the most powerful approaches in the formation of C–C, C–N, C–O, and C–S bonds for the complex organic scaffolds in drugs, natural products, organic materials, and fine chemicals. The nitrogen‐based ligands have upper hands in these reactions because they are air stable, inexpensive, and easier to handle than the phosphorous counterparts. In this perspective, Schiff bases and N‐heterocyclic carbenes have been explored extensively in terms of novel design and preparation as ligands in the coupling reactions. Facile recovery and reusability of these ligands make them eco‐friendly and economical. A comprehensive outline on the progress in Schiff bases–metal complexes and NHC–metal complexes that mediated cross‐coupling reactions with recent examples highlighted is reported (160 references).