A comparative study of second harmonic generation of pulsed CO2 laser radiation in some infrared crystals

A comparative study of second harmonic generation of CO₂ laser radiation in different infrared transmitting crystals like HgGa₂S₄, AgGa_xIn_(1−x)Se₂, sulphur and indium doped GaSe and ZnGeP₂ is reported. It is also shown that sulphur doped GaSe crystal is more efficient than ZnGeP₂ crystal in terms of effective figure of merit.     

Development of coherent tunable source in 2–16 μm region using nonlinear frequency mixing processes

A very convenient way to obtain widely tunable source of coherent radiation in the infrared region is through nonlinear frequency mixing processes like second harmonic generation (SHG), difference-frequency mixing (DFM) or optical parametric oscillation (OPO). Using commonly available Nd:YAG laser and its harmonic pumped dye laser radiation as parent beams, we have been able to generate coherent tunable infrared radiation (IR) in 2–16 μm region using different nonlinear crystals by DFM and OPO. We have also generated such IR source in the 4–5 μm region through SHG of CO₂ laser in different infrared crystals. In the process we have characterized a large number of nonlinear crystals like different borate group of crystals, KTP, KTA, LiIO₃, MgO:LiNbO₃, GaSe, AgGaSe₂, ZnGeP₂, AgGa_1?x In _x Se₂, HgGa₂S₄ etc. To improve the conversion efficiencies of such frequency conversion processes, we have developed some novel schemes, like multipass configuration (MC) and positive optical feedback (POF). The significance of the obtained results lies in the fact that to get the same conversion in SHG or DFM, one now requires fundamental input radiation with much lower intensity.     

Parametrical conversion of the frequency of organic lasers into the middle-IR range of the spectrum

The possibility of parametrical conversion of visible radiation of solid-state organic lasers into the middle-IR range of the spectrum in nonlinear GaSe_1–x S _x (x = 0‒0.13) crystals is investigated. Generation at the difference frequency (wavelength λ₃ = 9.43 μm) of induced oxazine-1 (at λ₁ = 740 nm) and rhodamine-800 (λ₂ = 803.4 nm) radiation is excited. The conversion efficiency is estimated, and prospects for its further increase are demonstrated.     

Materials and device properties of pseudomorphic In x Ga1−x As/Al0.3Ga0.7As/GaAs high electron mobility transistors (0<x<0.5)

Modulation doped Al_0.3Ga_0.7As/In _x Ga_1–x As/GaAs high electron mobility transistor structures for device application have been grown using molecular beam epitaxy. Initially the critical layer thickness for InAs mole fractions up to 0.5 was investigated. For InAs mole fractions up to 0.35 good agreement with theoretical considerations was observed. For higher InAs mole fractions disagreement occurred due to a strong decrease of the critical layer thickness. The carrier concentration for Al_0.3Ga_0.7As/In _x Ga_1–x As/GaAs high electron mobility transistor structures with a constant In _x Ga_1–x As quantum well width was investigated as a function of InAs mole fraction. If the In _x Ga_1–x As quantum well width is grown at the critical layer thickness the maximum carrier concentration is obtained for an InAs mole fraction of 0.37. A considerable higher carrier concentration in comparison to single-sided -doped structures was obtained for the structures with -doping on both sides of the In _x Ga_1–x As quantum well. Al_0.3Ga_0.7As/In _x Ga_1–x As/GaAs high electron mobility transistor structures with InAs mole fractions in the range 0–0.35 were fabricated for device application. For the presented field effect transistors best device performance was obtained for InAs mole fractions in the range 0.25–0.3. For the field effect transistors with an InAs mole fraction of 0.25 and a gate length of 0.15 m a f _T of 115 GHz was measured.Dedicated to H.-J. Queisser on the occasion of his 60th birthday     

Band alignments in the Cu(In,Ga)(S,Se)2 alloy system determined from deep-level defect energies

The composition dependence of defect energies in polycrystalline Cu(In_1-xGa_x)(Se_1-yS_y)₂ chalcopyrite semiconductor thin films is investigated by admittance spectroscopy. Alloying CuInSe₂ with S increases the energy of the dominant acceptor from 300 meV to approximately 380 meV in CuIn(Se_0.4S_0.6)₂, whereas in the alloy system Cu(In_1-xGa_x)Se₂, the acceptor energy remains unchanged over the whole composition range 0≤x≤1. Using the acceptor energy as a reference, we extrapolate the valence-band offsets ΔE_V=-0.23 eV for the combination CuInSe₂/CuInS₂ and ΔE_V=-0.04 eV for CuInSe₂/CuGaSe₂. Received: 19 July 2001 / Accepted: 27 July 2001 / Published online: 2 October 2001     

Density-functional theory investigation of energy gaps and optical properties of Hg1-xCdxTe and In1-xGaxAs

We use a modified Becke-Johnson exchange plus a local density approximation correlation potential within the density functional theory to investigate the electronic structures of Hg_1-xCd_xTe and In_1-xGa_xAs with x being 0, 0.25, 0.5, 0.75, and 1. For both of the two series, our calculated energy gaps and dielectric functions (real part ε₁ and imaginary part ε₂) are in agreement with the corresponding experimental results with x being between 0 and 1. The calculated zero-frequency refractive index varies greatly with x for Hg_1-xCd_xTe, but changes little with x for In_1-xGa_xAs, which is consistent with the real parts of their dielectric functions. Therefore, this new approach is satisfactory to describe the electronic structures and the optical properties of the semiconductors.     

Einstein relation in n-i-p-i and microstructures of nonlinear optical, optoelectronic and related materials: Simplified theory, relative comparison and suggestions for an experimental determination

We investigate the Einstein relation for the diffusivity-mobility ratio (DMR) for n-i-p-i and the microstructures of nonlinear optical compounds on the basis of a newly formulated electron dispersion law. The corresponding results for III-V, ternary and quaternary materials form a special case of our generalized analysis. The respective DMRs for II-VI, IV-VI and stressed materials have been studied. It has been found that taking CdGeAs₂, Cd₃As₂, InAs, InSb, Hg_1−xCd_xTe, In_1−xGa_xAs_yP_1−y lattices matched to InP, CdS, PbTe, PbSnTe and Pb_1−xSn_xSe and stressed InSb as examples that the DMR increases with increasing electron concentration in various manners with different numerical magnitudes which reflect the different signatures of the n-i-p-i systems and the corresponding microstructures. We have suggested an experimental method of determining the DMR in this case and the present simplified analysis is in agreement with the suggested relationship. In addition, our results find three applications in the field of quantum effect devices.     

High-temperature operation of AlGaInAs/InP lasers1994

We discuss the design of uncooled lasers which minimizes the change in both threshold current and slope efficiency over the temperature range from–40 to +85°C [1]. To prevent carrier overflow under high-temperature operation, the electron confinement energy is increased by using the Al _x Ga _y In_1–x–y As/InP material system [1] instead of the conventional Ga _x In_1–x As _y P_1–y /InP material system. Experimentally, we have investigated strained quantum well lasers with three different barrier layers and confirmed that the static and dynamical performance of the lasers with insufficient carrier confinement degrades severely under high-temperature operation [2]. With an optimized barrier layer, the Al _x Ga _y In_1–x–y As/InP strained quantum well lasers show superior hightemperature performance, such as a small drop of 0.3 dB in slope efficiency when the heat sink temperature changes from 25 to 100°C [3], a maximum CW operation temperature of 185°C [4], a thermally-limited 3-dB bandwidth of 13.9 GHz at 85°C [2], and a mean-time-to-failure of 33 years at 100°C and 10 mW output power [5].     

Effect of cadmium addition on the optical constants of thermally evaporated amorphous Se–S–Cd thin films

Se₇₅S_25−xCd_x is a promising ternary material, which has received considerable attention due to its applications in the fabrication of various solid state devices. These have distinct advantages, large packing density, mass replication, fast data rate, high signal-to-noise ratio and high immunity to defects. Measurements of optical constants (absorption coefficient, refractive index, extinction coefficient, real and imaginary part of the dielectric constant) have been made on Se₇₅S_25−xCd_x (where x = 0, 2, 4, 6 and 8) thin films of thickness 3000 Å as a function of photon energy in the wave length range 400–1000 nm. It has been found that the optical band gap and extinction coefficient increases while the value refractive index decreases on incorporation of cadmium in Se–S system. The results are interpreted in terms of the change in concentration of localized states due to the shift in Fermi level. Due to the large absorption coefficient and compositional dependence of reflectance, these materials may be suitable for optical disk material.     

Raman scattering in defect chalcopyrite crystals

Summary Raman-scattering measurements on the defect chalcopyrite compounds CdGa₂Se₄, CdGa₂S₄, ZnGa₂S₄ are reported. The phonon picture is consistent with the space group. A comparison between corresponding phonons suggests a simple model for the vibrational dynamics. Preliminary Raman results in the mixed compound Cd _x Zn_1−x Ga₂S₄ and in resonance conditions in CdGa₂Se₄ are presented. Paper presented at the ?V International Conference on Ternary and Multinary Compounds?, held in Cagliari, September 14–16, 1982.     

Scanning tunneling optical spectroscopy in mercury cadmium telluride and related compounds

We consider II–VI narrow gap semiconducting alloys: mercury cadmium telluride, Hg_(1−x)Cd_(x)Te (MCT), mercury zinc telluride, Hg_(1−x)Zn_(x)Te (MZT), and mercury zinc selenide, Hg_(1−x)Zn_(x)Se (MZS). MCT is emphasized for actual calculations, but a table of values needed in all calculations is presented. These materials are of interest because of their application to infrared detectors and related devices, and because they are candidates for low gravity crystal growth to improve uniformity. We present new calculations of the scanning tunneling optical spectroscopy (STOS) current from which the local energy gap, a function of x, and hence the stoichiometry (x) can be determined as a function of position with presumably high spatial resolution. The low temperature tunneling current (vs. photon frequency) has a sharper onset at the band gap than the low temperature optical absorption. This sharp onset originates from the rapid increase in the integrated transmission probabilities and is greatly enhanced by large diffusion lengths. Thus, STOS should be a competitive technique, compared to optical absorption, for determining the local stoichiometry, a property that is important for characterizing crystals.     

Semiempirical tight-binding modelling of III-N-based heterostructures

In this work, we present a second nearest neighbour sp³s^* semi-empirical tight-binding theory to calculate the electronic band structure of heterostructures based on group III-N binary semiconductors and their ternaries. The model Hamiltonian includes the second nearest neighbour (2nn) interactions, the spin–orbit splitting and the nonlinear variations of the atomic energy levels and the bond length with ternary mole fraction. Using this sp³s^* tight-binding approach, we investigated the electronic band structure of Al_1−xGa_xN/GaN and In_1−xGa_xN/GaN heterostructures as a function of composition and interface strain for the entire composition range (0≤x≤1). There is an excellent agreement between the model predictions and experiment for the principal bandgaps at Γ, L and X symmetry points of the Brillouin zone for AlN, GaN and InN binaries and Al_1−xGa_xN and In_1−xGa_xN ternaries. The model predicts that the composition effects on the valence band offsets is linear, but on the conduction band offsets is nonlinear and large when the interface strain and deformation potential is large.     

Magnetic Parameters of Hg1–x Mn x Se1–y S y and Hg1–x Mn x Te1–y S y Crystals

The magnetic susceptibility of Hg_1–x Mn _x Se_1–y S _y and Hg_1–x Mn _x Te_1–y S _y crystals is investigated by the Faraday method at H = 3 kOe in the temperature interval T = 77–300 K. It is established that the specific features of are due to Mn–S–Mn–S, Mn–Se–Mn–Se, and Mn–Te–Mn–Te clusters and mixed Mn–Se–Mn–S and Mn–Te–Mn–S clusters of different sizes in which the indirect exchange antiferromagnetic interaction between Mn atoms is realized through chalcogen atoms. Based on the dependences 1/_Mn = f(T), the magnetic parameters are determined and their dependences on the crystal composition (x and y) are established.     

Highly strained InxGa(1−x)As−InyAl(1−y)As (x>0.8,y<0.3) layers for short wavelength QWIP and QCL structures grown by MBE

Highly strained quantum cascade laser (QCL) and quantum well infrared photodetector (QWIPs) structures based on In_xGa_(1−x)As−In_yAl_(1−y)As (x>0.8,y<0.3) layers have been grown by molecular beam epitaxy. Conditions of exact stoichiometric growth were used at a temperature of 420°C to produce structures that are suitable for both emission and detection in the 2–5 μm mid-infrared regime. High structural integrity, as assessed by double crystal X-ray diffraction, room temperature photoluminescence and electrical characteristics were observed. Strong room temperature intersubband absorption in highly tensile strained and strain-compensated In_0.84Ga_0.16As/AlAs/In_0.52Al_0.48As double barrier quantum wells grown on InP substrates is demonstrated. Γ–Γ intersubband transitions have been observed across a wide range of the mid-infrared spectrum (2–7 μm) in three structures of differing In_0.84Ga_0.16As well width (30, 45, and 80 Å). We demonstrate short-wavelength IR, intersubband operation in both detection and emission for application in QC and QWIP structures. By pushing the InGaAs–InAlAs system to its ultimate limit, we have obtained the highest band offsets that are theoretically possible in this system both for the Γ–Γ bands and the Γ–X bands, thereby opening up the way for both high power and high efficiency coupled with short-wavelength operation at room temperature. The versatility of this material system and technique in covering a wide range of the infrared spectrum is thus demonstrated.     

Magnetotransmission of unpolarized infrared radiation in Hg1 − x Cd x Cr2Se4 (0 ≤ x ≤ 1) single crystals studied using the voigt geometry

The features characterizing the behavior of magnetotransmission in Hg_{1 ? x} Cd _x Cr₂Se₄ single crystals are studied using natural light in the infrared spectral range. The relation between the changes in the magneto-optical properties and in the electron band structure is found. It is shown that the most significant changes in the magnetotransmission spectrum and the band structure occur within the 0.1 < x < 0.25 range.     

Synthesis and characterization of ZnxHg1?xSeyS1?y quantum dots

This article describes the synthesis of highly water-soluble Zn _x Hg_1−x Se _y S_1−y quantum dots (QDs) in aqueous solution through a simple photo-assisted reaction between ZnSe QDs and mercury(I) nitrate dihydrate [Hg₂(NO₃)₂·2H₂O]. In order to deduce the optimal synthesis conditions, we varied several parameters, including the concentrations of mercaptosuccinic acid (MSA) and Hg₂(NO₃)₂·2H₂O, the illumination time, and the reaction temperature. When irradiated at temperatures below 80 °C, the ZnSe QDs reacted with the S²⁻ ions formed rapidly from MSA and the Hg²⁺ ions formed from Hg₂ ²⁺ ions to form Zn _x Hg_1−x Se _y S_1−y QDs through a process of photo-etching and surface combination. Under different conditions, we prepared a series of Zn _x Hg_1−x Se _y S_1−y QDs that emit fluorescence at the maximum wavelengths ranging from 405 to 760 nm. Inductively coupled plasma-mass spectrometry and transmission electron microscopy/energy dispersive spectrometry revealed that the content of Hg in the Zn _x Hg_1−x Se _y S_1−y QDs was greater when the synthesis was conducted at higher temperature. The Zn_0.88Hg_0.12Se_0.44S_0.56 QDs exhibit improved photostability than crude ZnSe QDs and possess long lifetimes (τ₁ ~ 38 ns and τ₂ ~ 158 ns).     

Cd x Hg 1−x−y Mn y Se solid solutions are promising materials for filters operating in the near- and middle-IR regions of the spectrum

Transmission spectra of new fourfold semimagnetic semiconductors Cd_xHg_1−x−yMn_ySe (x≤0.6; y≤0.01–0.1) at 77 and 300 K and the effect of annealing of them in vapors of the components on their optical properties were investigated. It is shown that Cd_xHg_1−x−yMn_ySe crystals possess high light transmission (≥60%) and can be used for devices operating in the near- and middle-IR regions of the spectrum. Chernovtsy State University, 2, Kotsyubinskii Str., Chernovtsy, 274012, Ukraina. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 66, No. 2, pp. 282–286, March–April, 1999.     

Band offset calculations applied to III–V nitride quantum well device engineering

Band offset calculations for zinc-blende pseudomorphically strained Al_1−xGa_xN/Al_1−yGa_yN and In_xGa_1−xN/In_yGa_1−yN interfaces have been performed on the basis of the model solid theory combined with ab initio calculations. From the results obtained, we have calculated, separately, the valence and conduction band discontinuities of In_xGa_1−xN/GaN and GaN/Al_1−xGa_xN as a function of the indium and gallium contents respectively. Using the latter results, we have extended our study to simulate band discontinuities for strained Ga_1−xIn_xN/relaxed Al_1−yGa_yN heterointerfaces. Information derived from this investigation will be useful for the design of lattice mismatched heterostructures in modeling optoelectronic devices emitting at ultraviolet to near infrared wavelengths.     

Study of correlation effects on stability of many-body complexes in III–V nitride quantum dots

The aim of this work is to analyze theoretically the correlation energies, for neutral, positive and negative excitons and bi-excitons in the III–V nitride In_xGa_1−xN/GaN quantum dot; where x=17.5% denotes the indium concentration. So, we propose a model consistent with experimental observations that is small In_xGa_1−xN truncated pyramids with circular base lying on wetting layer, both buried into GaN matrix. The correlation energies of many-body complexes X, X⁻, X⁺ and XX are investigated as a function of the quantum dot radius r_c and the intrinsic electric field.     

LP MOVPE growth of AlGalnP/GalnP and its application to visible laser diodes

High-quality and uniform bulk layers of (Al _x Ga_1–x )_0.5In_0.5P (x=0–0.7) and AlGalnP/GainP quantum wells (QWs) are grown on 2°-off (100) GaAs substrates by low-pressure metal organic vapour phase epitaxy at a low growth rate of 0.3 nm s^-1. The amount of lattice mismatch and the variation of PL peak energy of (Al_0.5Ga_0.5)_0.5In_0.5P on the 50-mm substrate are less than 6×10^-4 and 2 meV, respectively. (Al_0.5Ga_0.5)_0.5In_0.5P/Ga_0.5In_0.5P SQWs show narrow PL spectra even from a 0.6 nm well measured at 20 K. The variation of PL peak energy from (Al_0.5Ga_0.5)_0.5In_0.5P/Ga_0.5In_0.5P MQWs is less than 10 meV. Also, as-cleaved AlGalnP/GalnP lasers fabricated by a three-step MOVPE show a pulsed threshold current of 82 mA at room temperature, output power of 12 mW, and the lasing wavelength at 668.2 nm.