Molecular tectonics. Porous hydrogen-bonded networks built from derivatives of 9,9'-spirobifluorene

Molecules with multiple sites that induce strong directional association tend to form open networks with significant volumes available for the inclusion of guests. Such molecules can be conveniently synthesized by grafting diverse sticky sites onto geometrically suitable cores. The characteristic inability of 9,9'-spirobifluorene to form close-packed crystals suggests that it should serve as a particularly effective core for the elaboration of molecules designed to form highly porous networks. To test this hypothesis, various new tetrasubstituted 9,9'-spirobifluorenes with hydrogen-bonding sites at the 3,3',6,6'-positions or 2,2',7,7'-positions were synthesized by multistep routes. Four of these compounds were crystallized, and their structures were determined by X-ray crystallography. In all cases, the compounds form extensively hydrogen-bonded networks with high porosity. In particular, 43% of the volume of crystals of 3,3',6,6'-tetrahydroxy-9,9'-spirobifluorene (28) is available for the inclusion of guests, whereas the porosity is only 28% in crystals of tetrakis(4-hydroxyphenyl)methane, a close model that lacks the spirobifluorene core. Similarly, the porosities found in crystals of 2,2',7,7'-tetra(acetamido)-9,9'-spirobifluorene (33) and 2,2',7,7'-tetrasubstituted tetrakis(diaminotriazine) 39 are 33% and 60%, respectively. Moreover, the porosity of crystals of 2,2',7,7'-tetrasubstituted tetrakis(triaminotriazine) 40 is 75%, the highest value yet observed in crystals built from small molecules. These observations demonstrate that a particularly effective strategy for engineering molecules able to form highly porous networks is to graft multiple sticky sites onto spirobifluorenes or other cores intrinsically resistant to close packing.     

Crystallization-induced aggregation of block copolymer micelles: influence of crystallization kinetics on morphology

We present a systematic investigation of the crystallization and aggregation behavior of a poly(1,2-butadiene)-block-poly(ethylene oxide) diblock copolymer (PB-b-PEO) in n-heptane. n-Heptane is a poor solvent for PEO and at 70°C the block copolymer self-assembles into spherical micelles composed of a liquid PEO core and a soluble PB corona. Time- and temperature-dependent light scattering experiments revealed that when crystallization of the PEO cores is induced by cooling, the crystal morphology depends on the crystallization temperature (T _c ): Below 30°C, the high nucleation rate of the PEO core dictates the growth of the crystals by a fast aggregation of the micelles into meander-like (branched) structures due to a depletion of the micelles at the growth front. Above 30°C the nucleation rate is diminished and a relatively small crystal growth rate leads to the formation of twisted lamellae as imaged by scanning force microscopy. All data demonstrate that the formation mechanism of the crystals through micellar aggregation is dictated by two competitive effects, namely, by the nucleation and growth of the PEO core.     

First examples of a new class of discogen

Two examples of a new class of discotic liquid crystals are presented. Their molecular architecture consists of a trisubstituted central core (either a benzene or a cyclohexane ring) and three regional cores, with three decyloxy-chains in the 3,4,5-positions of a particular benzene ring. These regional cores are linked to the central core via ester groups. Polarizing microscopy and calorimetric measurements reveal the existence of monotropic and enantiotropic discotic mesophases respectively. The products exhibit a pronounced hindering of crystallization at room temperature.     

Self-assembly of naphthalene diimides into cylindrical microstructures

We have designed two rod-shaped compounds each incorporating a naphthalene diimide core and two terminal carboxylic acids. Both molecules aggregate in aqueous solution and spontaneously organize into cylindrical microstructures on the surface of solid substrates. Presumably, hydrogen bonds between the carboxylic acid termini and hydrophobic contacts between the naphthalene diimide cores are mainly responsible for the formation of these supramolecular arrays. Indeed, extended stacks of molecules self-assemble with close contacts between their aromatic cores in single crystals grown from polar solvents.     

First examples of a new class of discogen

Abstract

Two examples of a new class of discotic liquid crystals are presented. Their molecular architecture consists of a trisubstituted central core (either a benzene or a cyclohexane ring) and three regional cores, with three decyloxy-chains in the 3,4,5-positions of a particular benzene ring. These regional cores are linked to the central core via ester groups. Polarizing microscopy and calorimetric measurements reveal the existence of monotropic and enantiotropic discotic mesophases respectively. The products exhibit a pronounced hindering of crystallization at room temperature.     

New symmetric azobenzene molecules of varied central cores: Synthesis and characterisation for liquid crystalline properties

A new series of azobenezene liquid crystals (LCs) was designed and synthesised by known and straightforward methods. The central connecting cores of the molecules varied viz., benzene/naphthalene/biphenyl. The molecular structures were confirmed by infrared, UV, nuclear magnetic resonance spectroscopic techniques. The LC texture and thermal phase behaviours were investigated by polarising optical microscopy and differential scanning calorimetry. Smectic B phase was found in biphenyl-derived azobenzene ester. The effect of central core on LC properties was investigated. The decreased angle at central connecting core suppressed the melting points, phase transition temperatures without losing LC properties, whereas, in moderate angle compounds LC properties were suppressed. The compounds with increased angle at central core favours rich mesomorphism.     

The growth of crystals in solution

The crystallization of sparingly soluble salts from their aqueous supersaturated solutions is discussed from the standpoint of two important applications; scale formation and biological mineralization. Theories of crystal growth are outlined and the importance of kinetic factors in determining the nature of the growing phases is discussed. The kinetic factors can be studied by using a highly reproducible seeded growth technique and under certain conditions secondary nucleation can also be induced on the surface of the inoculating seed crystals. The kinetics of crystallization of the alkaline earth surfaces and the calcium phosphates is discussed. In the latter systems, temperature, supersaturation, surface concentration, pH, ionic strength and the presence of foreign ions are important in determining the nature of the phase which grows on the added seed crystals. The mechanism of the retardation of crystal growth by added crystallization inhibitors is illustrated by the influence of organic phosphonate molecules upon the precipitation of calcium carbonate.     

The effect of annealing on slow crack growth in an ethylene-hexene copolymer

A quenched ethylene-hexene copolymer was annealed in the temperature range of 86 to 127°C. The morphological changes were monitored by differential scanning calorimetry (DSC) and density. The slow crack growth resistance tested at 80°C was a maximum at an annealing temperature of 113°C and a minimum of 123°C. The lifetimes can be varied by more than a factor of 20 depending on the thermal treatment. The increase in slow crack growth resistance between 86 and 113°C is attributed to an increase in the strength of the crystals by becoming more perfect and to the conversion of loose tie molecules into taut tie molecules. The decrease in strength between 113 and 123°C is attributed to the decrease in tie molecules when a large fraction of the as-quenched crystals begin to melt.     

Supramolecular staircase via self-assembly of disklike molecules at the solid-liquid interface.

A series of soluble hexabenzocoronene (HBC) derivatives with pendant optically active (S)-3,7-dimethyloctanyl and (R,S)-3,7-dimethyloctanyl (mixture of stereoisomers) hydrocarbon side chains with and without a phenylene spacer were assembled into differently ordered arrays at the interface between a solution and the basal plane of highly oriented pyrolytic graphite (HOPG). Molecularly resolved scanning tunneling microscopy (STM) images revealed that all derivatives self-assemble into oriented crystals in quasi-two dimensions. However, while for the alkyl-substituted HBCs (1,4) all of the single aromatic cores within a monolayer exhibit the same contrast in the STM, the single aromatic cores with a phenylene group between the alkyl side chains and the aromatic core (2a,2b,3) exhibit different contrasts within a monolayer. For the disks carrying racemic branched or n-alkyl side chains (2b,3) a random distribution of the two different contrasts within the 2D-crystal is observed, while the optically active phenylene-alkyl-substituted HBC (2a) exhibits a periodical distribution of three contrasts within the monolayer. We attribute the different contrasts of the aromatic cores in the presence of the phenylene groups to a loss of the planarity of the whole molecule and different conformations, which allow the conjugated disks to attain different equilibrium positions above the surface of HOPG. In the case of the optically active side chains a regular superstructure with three distinctly different positions such as in a staircase is attained. The self-assembly processes are governed by the interplay of intramolecular as well as intermolecular and interfacial interactions. In the present case, the interactions may induce both the molecules to acquire well distinct positions along the z axis and to adopt different conformations. The reported results open new avenues of exploration. For instance, the different couplings of conjugated molecules with the substrate at different separations can be investigated by means of scanning tunneling spectroscopy (STS). Furthermore, experiments on the STM tip-induced switching of single molecules embedded in a monolayer appear feasible.     

Influence of steric interactions and random side chain variations on the mesomorphic properties of bowlic mesogens

The effect of structural variations on the mesomorphic nature of columnar liquid crystals of general structure I is studied. X-ray crystal structure analyses of compounds la and 2a reveal the columnar organization of the macrocyclic cores in the solid state. The up and down asymmetry of the cores is resolved in an alternating sequence of up-up and down-down intermolecular contacts. Specific interactions between the R substituents are present, which influence the stacking distance between the cores in the down-down intermolecular contacts. Statistical incorporation of different side chains on the same macrocyclic core produces, when the difference in length between the alkyl chains is appropriate, random mixtures having wide mesomorphic ranges. The increase of disorder associated with the statistical side chain distribution on the core and with the structural heterogeneity of each component of the mixture have the effect of depressing mainly the crystal-mesophase transition temperature.     

Tetrahedral zinc complexes with liquid crystalline and luminescent properties: interplay between nonconventional molecular shapes and supramolecular mesomorphic order

Novel metallomesogens with luminescent properties and liquid crystalline behavior at room temperature have been achieved by the preparation of zinc complexes with polycatenar pyrazole and bis(pyrazolyl)methane ligands. Their molecular structures do not have a conventional shape in that they are far from the typical rod-like and flat disc-like geometries of common liquid crystals. They consist of a nonplanar nucleus due to the methylene spacer and/or the coordination to the tetrahedral center, as confirmed by single crystal analysis of the cores. The different numbers and positions of side chains in the pyrazole ligand enabled us to access lamellar and columnar mesophases and, of particular interest, to obtain columnar arrangements at room temperature. Supramolecular models for the organization of the molecules in the mesophases are proposed on the basis of the small-angle XRD diffractograms. The zinc complexes display luminescence in the near UV-blue region with large Stokes shifts. An interplay between non-conventional molecular shapes (due to the tetrahedral core) and the supramolecular mesomorphic order (due to the ligand design) led to materials that interestingly embody two rather opposite properties, a columnar self-organizational ability and luminescence with weak intermolecular interactions.     

Morphology of polypropylene crystals. I. Dilute solution-grown lamellar crystals

The dependence of crystalline morphology of isotactic polypropylene crystallized from dilute solutions on its molecular weight and growing conditions and the mechanism of crystal growth were studied by electron microscopy and electron diffraction. Lathshaped lamellar crystals 150–300 A. in thickness are obtained from fractionated polypropylene powders of M _w (average molecular weight) = 600,000 and 240,000, but not from the samples of M _w = 82,000 and 44,000, by means of isothermal crystallization at 130°C. for 20 hr. in dilute α-chloronaphthalene solution (0.005 wt.-%). Precipitation of the fractionated polypropylene sample of M _w = 82,000 from a dilute solution of carbitol gives typical dendritic crystals under the same isothermal crystallizing conditions as mentioned above. The mode of chain folding in these crystals based on the orientation and the crystal structure of the lamellar crystals agrees with that proposed by Sauer, Morrow, and Richardson. From the morphological observations, the mechanism of growth pertinent to polypropylene lamellar crystals is presumed to be as follows: fibrils at first aggregate, then the molecular chains are folded to form small lamellae, and then these small lamellae accumulate compactly to grow to large, lath-shaped, lamellar crystals.     

Nanostructured materials

In the cores of lattice defects (e.g. dislocations, grain boundaries, phase boundaries etc.) a special state of solid matter exists due to the forces (constraints) between the atoms (molecules) in the core region of the defects and the atoms (molecules) in the surrounding strained crystal lattices. These constraints result in the formation of a solid state structure characterized by a low density (typically 60 - 80 % of the crystal density) and a very broad distribution of nearest neighbour spacings. It is the basic idea of Nanostructured Materials to utilize the atomic structures formed in the cores of defects to generate a new class of materials. This goal is achieved by incorporating so many defects into a (formerly perfect) crystal that about 50 vol % of the material consists of defect cores. The results of studies by means of electron microscopy, neutron and x-ray diffraction, various types of spectroscopy and property measurements agree with these ideas. Nanostructured Materials exhibit properties that deviate (sometimes by many orders of magnitude) from the properties of crystals and glasses with the same chemical composition.     

Preparation of zinc oxide nanorods using pulsed laser ablation in water media at high temperature

ZnO columnar single crystals were formed by pulsed laser ablation in deionized water and surfactant aqueous solutions of lauryl dimethylaminoacetic acid (LDA) and cetyltrimethylammonium bromide (CTAB) at 80 degrees C. ZnO particles produced by laser ablation were dissolved at a higher temperature than 60 degrees C, and then crystalline growth to columnar structure proceeded. While large ZnO columnar crystals were obtained in deionized water, the crystals prepared in surfactant solution were smaller than those in deionized water due to inhibition of crystalline growth by surfactant adsorption on ZnO surfaces. The size of ZnO nanorods depended on how surfactant molecules adsorb on ZnO surface.     

Thermal degradation, dielectric and magnetic studies on copper tartrate trihydrate crystals

Single crystals of copper tartrate trihydrate (CTT) with orthorhombic structure were grown in silica gel medium, by the controlled chemical reaction method. The Fourier transform infrared spectrum in the range 400–4,000 cm^?1 were recorded and the vibrational bands corresponding to different functional groups are assigned. Thermal stability of the grown crystals was investigated by differential thermal analysis, thermogravimetric and differential scanning calorimetry studies. The presence of water molecules and the dehydration stages are discussed. The dielectric studies on CTT crystals were performed in the frequency range of 100–5 MHz at three different temperatures which indicated that the dielectric constant decreases with frequency and increases with temperature. The ac conductivity is found to increase with frequency and temperature. The vibrating sample magnetometer studies on these crystals confirmed the diamagnetic nature of the CTT crystals.     

Organization of acenes with a cruciform assembly motif

This study explores the assembly in the crystalline state of a class of pentacenes that are substituted along their long edges with aromatic rings forming rigid, cruciform molecules. The crystals were grown from the gas phase, and their structures were compared with DFT-optimized geometries. Both crystallographic and computed structures show that a planar acene core is the exception rather than the rule. In the assembly of these molecules, the phenyl groups block the herringbone motif and further guide the arrangement of the acene core into higher order structures. The packing for the phenyl-substituted derivatives is dictated by close contacts between the C-H's of the pendant aromatic rings and the carbons at the fusions in the acene backbone. Using thiophene substituents instead of phenyls creates cofacially stacked acenes. In thin films, the thiophene-substituted derivative forms devices with good electrical properties: relatively high mobility, high ON/OFF ratios, and low threshold voltage for device activation. An unusual result is obtained for the decaphenyl pentacene when devices are fabricated on its crystalline surface. Although its acene cores are well isolated from each other, this material still exhibits good electrical properties.     

Gold nanoshells on polystyrene cores for control of surface plasmon resonance

A method is presented for synthesizing core-shell structures consisting of monodisperse polystyrene latex nanospheres as cores and gold nanoparticles as shells. Use of polystyrene spheres as the core in these structures is advantageous because they are readily available commercially in a wide range of sizes, and with dyes or other molecules doped into them. Gold nanoparticles, ranging in size from 1 to 20 nm, are prepared by reduction of a gold precursor with sodium citrate or tetrakis(hydroxymethyl)phosphonium chloride (THPC). Carboxylate-terminated polystyrene spheres are functionalized with 2-aminoethanethiol hydrochloride (AET), which forms a peptide bond with carboxylic acid groups on their surface, resulting in a thiol-terminated surface. Gold nanoparticles then bind to the thiol groups to provide up to about 50% coverage of the surface. These nanoparticles serve as seeds for growth of a continuous gold shell by reduction of additional gold precursor. The shell thickness and roughness can be controlled by the size of the nanoparticle seeds as well as by the process of their growth into a continuous shell. By variation of the relative sizes of the latex core and the thickness of the gold overlayer, the plasmon resonance of the nanoshell can be tuned to specific wavelengths across the visible and infrared range of the electromagnetic spectrum, for applications ranging from the construction of photonic crystals to biophotonics. The position and width of the plasmon resonance extinction peak are well-predicted by extended Mie scattering theory.     

Oriented polymers from solution. I. A novel method for producing polyethylene films

A novel method for the production of uniaxially oriented polyethylene film is demonstrated, it being an extension of the “surface growth” method for obtaining polyethylene fibers from solution using a Couette apparatus. The film growth is found to be affected by temperature, rotor speed, rotor material, and surface roughness. Together with its possible practical importance, film growth is presented as a useful means of sample preparation and as a way to increased linear fiber growth rates. In addition, its use for studies on solution grown polypropylene fibers is indicated as well as its implications for “surface growth” of polymer crystals in general.     

Non-linear boomerang-shaped liquid crystals derived from 2,5-bis(p-hydroxyphenyl)-1,3,4-oxadiazole

Boomerang-shaped liquid crystals based on 2,5-bis(p-hydroxyphenyl)-1,3,4-oxadiazole (ODBP) having a ~ 134° bend in the mesogenic cores were synthesized and their properties investigated by optical microscopy and differential scanning calorimetry. Substituting the nonlinear ODBP mesogenic core with p-dodecyloxyphenyl tails resulted in a non-linear mesogen that exhibited five distinct mesophases and a clearing temperature of 204°C. The highest temperature phase appears to be nematic followed by a smectic C phase. The latter phase in freely suspended films does not appear to exhibit polar order. The highest temperature phase of 4,4'(1,3,4-Oxadiazole-2,5-diyl) di-p-heptylbenzoate shows a schlieren texture with a 2-brush pattern exclusively.     

Amphiphilic hairy disks with branched hydrophilic tails and a hexa-peri-hexabenzocoronene core

Amphiphilic discotic molecules with hydrophilic side branches consisting of hexaphenyl hexa-peri-hexabenzocoronene and hexabiphenyl hexa-peri-hexabiphenylcoronene as the aromatic core and hexa-substituted oligoethers as the branched peripheral chains have been synthesized, and their microstructure has been characterized. The discotic molecules based on dibranched oligoether side chains have been observed to self-organize into a well-ordered hexagonal columnar structure within liquid crystalline phases, which possessed an exceptionally high thermal stability and an unusually wide temperature range over >300 degrees C. We suggest that a combination of the large lateral dimensions of the rigid cores and disordered structure of the oxygen-containing branches tails is a driving force to the formation of a highly ordered columnar structure in the bulk state with enhanced molecular segregation. In contrast to the thermotropic phase behavior that favors the formation of highly ordered columnar aggregates through a strong stacking interaction, the hexabenzocoronene cores are packed in a face-on arrangement at the air/water interface and on solid surfaces with surface domains composed of an array of 7 x 7 molecules. We suggest a crablike molecular conformation and cluster-segregated monolayers with 6-fold symmetry and unusual face-on packing on a solid surface. Preliminary spectroscopic studies in the bulk state have shown that the molecules based on a hexaaromatic-substituted core may serve as functional supramolecular materials with high energy transfer characteristic within the columns due to near-perfect columnar ordering, which is unchanged over a wide temperature range. We believe that an absence of the crystallization phenomenon of side-branched oligoether chains is critical for the formation of long-range columnar ordering with strong intracolumnar correlation of conjugated disks important for high carrier mobility.