Photocatalytic activity of ZrO2 nanoparticles prepared by electrical arc discharge method in water

ZrO₂ nanoparticles were synthesized through arc discharge of zirconium electrodes in deionized (DI) water. X-ray diffraction (XRD) analysis of the as prepared nanoparticles indicates formation a mixture of nanocrystalline ZrO₂ monoclinic and tetragonal phase structures. Transmission electron microscopy (TEM) images illustrate spherical ZrO₂ nanoparticles with 7–30 nm diameter range, which were formed during the discharge process with 10 A arc current. The average particle size was found to increase with the increasing arc current. X-ray photoelectron spectroscopy (XPS) analysis confirms formation of ZrO₂ at the surface of the nanoparticles. Surface area of the sample prepared at 10 A arc current, measured by BET analysis, was 44 m²/g. Photodegradation of Rhodamine B (Rh. B) shows that the prepared samples at lower currents have a higher photocatalytic activity due to larger surface area and smaller particle size.     

Research article green synthesis of zirconium oxide nanoparticles (ZrO2NPs) using Helianthus annuus seed and their antimicrobial effects

Monoclinic Zirconia (ZrO₂NPs) nanoparticles were successfully prepared by non-toxic and low-cost production using green synthesis analysis from the methanolic extract of Helianthus annuus (sunflower) seeds as the reducing agent. Mechanism of the chemical reaction has shown the reduction and which confirmed the formation of nanoparticles via chemical bonding in the IR spectrum at 502-498 ​cm^-1 ZrO₂ nanoparticles were characterized as sharp peak at 275 ​nm in the UV-Vis spectrum with 3.7eV in photon energy bandgap, it confirms the monoclinic crystal structure, as well as x-ray diffractometry, reveals zirconia crystallite is 40.59 ​nm. The internal morphology of crystal structure is exhibited by Scanning Electron Microscopy (SEM), and Transmission Electron Microscope (TEM). The stability of nanoparticles is represented in terms of zeta potential (-9.32 ​mV) and particle size distribution (~331 ​nm). Biosynthesized ZrO₂NPs were indicated as superior antimicrobial activity for biomedical applications.     

A comparative study on the dispersion behaviors and surface acid properties of molybdena on CeO2 and ZrO2 (Tet)

Dispersion of molybdena on CeO₂, ZrO₂ (Tet), and a mixture of CeO₂ and ZrO₂ (Tet), was investigated by using laser Raman spectroscopy (LRS), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and temperature programmed reduction (TPR). The results indicate that molybdena is dispersed on both individual oxide support and mixed oxide support at the adopted molybdena loadings (0.2 and 0.8 mmol Mo⁶⁺/100 m²) and the structure of the supported molybdena species is intimate association with its loading amount. Two molybdena species are identified by Raman results, i.e. isolated MoO²⁻₄ species at 0.2 mmol Mo⁶⁺/100 m² and polymolybdate species at 0.8 mmol Mo⁶⁺/100 m². IR spectra of ammonia adsorption prove that isolated MoO²⁻₄ species are Lewis acid sites on the Mo/Ce and/or Zr samples, and the polymolybdate species are Brönsted acid sites on the Mo/Ce and/or Zr samples. Moreover, a combination of the Raman, IR and TPR results confirms that at 0.2 mmol Mo⁶⁺/100 m² Ce + Zr, molybdena is preferentially dispersed on the surface of CeO₂ when a mixed oxide support (CeO₂ and ZrO₂) is present, which was explained in term of the difference of the surface basicity between CeO₂ and ZrO₂ (Tet). Surface structures of the oxide supports were also taken into consideration.     

Electrochemical characterization of praseodymium centers in Pr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Zr<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> zirconias using electrocatalysis and photoelectrocatalysis

The voltammetry of nanoparticles and scanning electrochemical microscopy are applied to characterize praseodymium centers in tetragonal and monoclinic zirconias, doped with praseodymium ions (Pr _x Zr_1−x O₂), prepared via sol–gel routes. Doped zirconia nanoparticles were synthesized by a sol–gel liquid-phase route and characterized by different techniques, including X-ray diffraction powder pattern, ultraviolet–visible diffuse reflectance spectroscopy, infrared spectroscopy, and transmission electron microscopy (TEM). Gels annealed at around 400 °C yielded tetragonal Pr _x Zr_1−x O₂ phases. The monoclinic forms of Pr-doped ZrO₂ were obtained by annealing at temperatures higher than 1,100 °C. TEM micrographs proved that the size of the nanoparticles produced was dependent on their crystalline form, around 15 and 60 nm for tetragonal and monoclinic, respectively. The electrochemical study confirmed that a relatively high content of praseodymium cation was in the chemical state (IV), i.e., as Pr⁴⁺, in both zirconia host lattices. The catalytic and photocatalytic effects of Pr⁴⁺ centers located in the monoclinic zirconia lattice on nitrite reduction and oxygen evolution reaction were studied.     

Highly Dispersed Ce x Zr1−x O2 Nano-Oxides Over Alumina, Silica and Titania Supports for Catalytic Applications

We have been exploring the utilization of supported ceria and ceria–zirconia nano-oxides for different catalytic applications. In this comprehensive investigation, a series of Ce _x Zr_1−x O₂/Al₂O₃, Ce _x Zr_1−x O₂/SiO₂ and Ce _x Zr_1−x O₂/TiO₂ composite oxide catalysts were synthesized and subjected to thermal treatments from 773 to 1073 K to examine the influence of support on thermal stability, textural properties and catalytic activity of the ceria–zirconia solid solutions. The physicochemical characterization studies were performed using X-ray diffraction (XRD), Raman spectroscopy (RS), X-ray photoelectron spectroscopy (XPS), and high-resolution transmission electron microscopy (HREM), thermogravimetry and BET surface area methods. To evaluate the catalytic properties, oxygen storage/release capacity (OSC) and CO oxidation activity measurements were carried out. The XRD analyses revealed the formation of Ce_0.75Zr_0.25O₂, Ce_0.6Zr_0.4O₂, Ce_0.16Zr_0.84O₂ and Ce_0.5Zr_0.5O₂ phases depending on the nature of support and calcination temperature employed. Raman spectroscopy measurements in corroboration with XRD results suggested enrichment of zirconium in the Ce _x Zr_1−x O₂ solid solutions with increasing calcination temperature thereby resulting in the formation of oxygen vacancies, lattice defects and oxygen ion displacement from the ideal cubic lattice positions. The HREM results indicated a well-dispersed cubic Ce _x Zr_1−x O₂ phase of the size around 5 nm over all supports at 773 K and there was no appreciable increase in the size after treatment at 1073 K. The XPS studies revealed the presence of cerium in both Ce⁴⁺ and Ce³⁺ oxidation states in different proportions depending on the nature of support and the treatment temperature applied. All characterization techniques indicated absence of pure ZrO₂ and crystalline inactive phases between Ce–Al, Ce–Si and Ce–Ti oxides. Among the three supports employed, silica was found to stabilize more effectively the nanosized Ce _x Zr_1−x O₂ oxides by retarding the sintering phenomenon during high temperature treatments, followed by alumina and titania. Interestingly, the alumina supported samples exhibited highest OSC and CO oxidation activity followed by titania and silica. Details of these findings are consolidated in this review.     

Low temperature complete combustion of dilute propane over Mn-doped ZrO2 (cubic) catalysts

Combustion of dilute propane (0.9 mol%) over Mn-doped ZrO₂ catalysts prepared using different precipitating agents (viz. TMAOH, TEAOH, TPAOH, TBAOH and NH₄OH), having different Mn/Zr ratios (0.05—0.67) and calcined at different temperatures (500—800°C), has been thoroughly investigated at different temperatures (300—500°C) and space velocities (25,000–100,000 cm³ g⁻¹ h⁻¹) for controlling propane emissions from LPG-fuelled vehicles. Mn-doped ZrO₂ catalyst shows high propane combustion activity, particularly when its ZrO₂ is in the cubic form, when its Mn/Zr ratio is close to 0.2 and when it is prepared using TMAOH as a precipitating agent and calcined at 500—600°C. Pulse reaction of propane in the absence of free-O₂ over Mn-doped ZrO₂ (cubic) and Mn-impregnated ZrO₂ (monoclinic) catalysts has also been investigated for studying the relative reactivity and mobility of the lattice oxygen of the two catalysts. Both reactivity and mobility of the lattice oxygen of Mn-doped ZrO₂ are found to be much higher than that of Mnimpregnated ZrO₂. Propane combustion over Mn-doped ZrO₂ catalyst involves a redox mechanism     

Nanostructured BiVO4 photocatalysts synthesized via a polymer-assisted coprecipitation method and their photocatalytic properties under visible-light irradiation

Nanostructured BiVO₄ photocatalysts were synthesized by a coprecipitation process in the presence of sodium carboxymethylcellulose (CMC), which acts as a steric stabilizer during the formation and growth of the BiVO₄ nanoparticles. Samples with different contents of CMC were prepared in order to study the effect of the polymer on the final morphology of the oxide. The synthesized samples were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), diffuse reflectance spectroscopy (DRS), and adsorption-desorption isotherms (BET). The presence of CMC during the first stage of BiVO₄ synthesis, promoted the formation of granular particles controlling its morphology and favoring its dispersion. The BiVO₄ monoclinic polymorph (m-BiVO₄) was obtained free of the tetragonal crystalline form (t-BiVO₄) by annealing at different temperatures, which were influenced by CMC content: 400 °C (0.5 wt %), 450 °C (3.0 wt %), and 350 °C (6.0 and 9.0 wt %). BiVO₄ nanoparticles showed photocatalytic activity, as they bleached an aqueous solution of rhodamine B (rhB) under visible-light irradiation. The photocatalytic activity of the BiVO₄ samples was directly correlated with the amount of CMC added during the synthesis process.     

Structural characterization and photocatalytic activity of hollow binary ZrO2/TiO2 oxide fibers

The formation of hollow binary ZrO₂/TiO₂ oxide fibers using mixed precursor solutions was achieved by activated carbon fibers templating technique combined with solvothermal process. The samples were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), N₂ adsorption, X-ray photoelectron spectroscopy (XPS), UV-vis, and infrared (IR) spectroscopy. The binary oxide system shows the anatase-type TiO₂ and tetragonal phase of ZrO₂, and the introduction of ZrO₂ notably inhibits the growth of TiO₂ nanocrystallites. Although calcined at 575 °C, all hollow ZrO₂/TiO₂ fibers exhibit higher surface areas (>113 m²/g) than pure TiO₂ hollow fibers. The Pyridine adsorption on ZrO₂/TiO₂ sample indicates the presence of stronger surface acid sites. Such properties bring about that the binary oxide system possesses higher efficiency and durable activity stability for photodegradation of gaseous ethylene and trichloromethane than P25 TiO₂. In addition, the macroscopic felt form for the resulting materials is more beneficial for practical applications than traditional catalysts forms.     

(ZrO2)0.86(Sm2O3)0.14纳米粉体的水热法合成及其烧结体的电性能

以湿化学法制得Zr(OH)₄和Sm(OH)₃的共沉淀为前驱体, 在碱性介质中用水热法合成了(ZrO₂)_0.86(Sm₂O₃)_0.14及(ZrO₂)_0.88(Sm₂O₃)_0.12纳米粉体. 将纳米粉体在较低温度(1450 ℃)下烧结制得了致密的固体电解质陶瓷样品, 比通常高温固相反应法采用的烧结温度(＞1600 ℃)降低了150 ℃以上. XRD测定结果表明, (ZrO₂)_0.86(Sm₂O₃)_0.14纳米粉体及其烧结体均为立方相, 但(ZrO₂)_0.88(Sm₂O₃)_0.12纳米粉体为立方相, 它的烧结体为立方相和单斜相的混合相. 用交流阻抗谱法、氧浓差电池法及氧泵(氧的电化学透过)法研究了(ZrO₂)_0.86(Sm₂O₃)_0.14陶瓷样品在600～1000 ℃下的离子导电特性. 结果表明, 该陶瓷样品在600～1000 ℃下氧离子迁移数为1, 氧离子电导率的最大值为3.2×10^－2 S•cm^－1, 是一个优良的氧离子导体; 它的氧泵性能明显地优于YSZ.     

Vibrational spectra of WO3·nH2O and WO3 polymorphs

Vibrational spectra of polycrystalline WO₃ hydrates and polymorphs were measured and analyzed. The effect of sampling techniques on IR spectra has been demonstrated. The phase transition into triclinic polymorph (C⁵_2 h → C¹_i) has been revealed for the sample of monoclinic WO₃ prepared as KBr pellet. Using the deuteration method in situ has shown that cubic WO₃ is non-stoichiometric oxide stabilized by residual OH groups of WO₃·H₂O precursor.     

ZrO2纳米粒子原位杂化PVDF膜的制备及其抗污染性能

针对传统聚合物膜抗污染性差的问题,本文从杂化膜结构设计出发,提出将ZrO2纳米粒子的原位制备和聚偏氟乙烯(PVDF)相转化成膜过程有机结合的制膜新方法.该方法将阴离子交换树脂引入到N,N-二甲基甲酰胺(DMF)中,以氧氯化锆为原料,利用阴离子交换树脂提供的―OH与无机盐的阴离子进行交换,得到ZrO2纳米粒子均匀分散的N,N-二甲基甲酰胺溶胶体系.随后将PVDF聚合物溶解到所得的N,N-二甲基甲酰胺溶胶体系中,获得均一、透明的铸膜液.利用X射线光电子能谱(XPS)和透射电子显微镜(TEM)对杂化膜中锆的存在状态和分散性能进行了表征.结果表明,ZrO2纳米粒子均匀分散在PVDF基体中,并且形成的纳米粒子的粒径约为10-20 nm.通过粘度、分相速度和膜形态的测定,研究了成膜机理.结果表明,ZrO2纳米粒子的引入加速了铸膜液成膜过程的分相速度.杂化膜的亲水性能通过接触角测定仪进行了评价.并选择以牛血清蛋白为代表模拟污染物,考察了杂化超滤膜的抗污染性能.结果表明,原位形成的ZrO2纳米粒子显著提高了膜的亲水性,减少了膜对蛋白质的吸附.这种将ZrO2纳米粒子的原位制备和PVDF相转化成膜过程有机结合的制膜新方法在有机-无机杂化膜的制备领域具有显著意义.     

Thermogravimetric analysis and hot-stage Raman spectroscopy of cubic indium hydroxide

The transition of cubic indium hydroxide to cubic indium oxide has been studied by thermogravimetric analysis complimented with hot-stage Raman spectroscopy. Thermal analysis shows the transition of In(OH)₃ to In₂O₃ occurs at 219 °C. The structure and morphology of In(OH)₃ synthesised using a soft chemical route at low temperatures was confirmed by X-ray diffraction and scanning electron microscopy. A topotactical relationship exists between the micro/nano-cubes of In(OH)₃ and In₂O₃. The Raman spectrum of In(OH)₃ is characterised by an intense sharp band at 309 cm⁻¹ attributed to ν₁ In–O symmetric stretching mode, bands at 1137 and 1155 cm⁻¹ attributed to In-OH δ deformation modes, bands at 3083, 3215, 3123 and 3262 cm⁻¹ assigned to the OH stretching vibrations. Upon thermal treatment of In(OH)₃, new Raman bands are observed at 125, 295, 488 and 615 cm⁻¹ attributed to In₂O₃. Changes in the structure of In(OH)₃ with thermal treatment is readily followed by hot-stage Raman spectroscopy.     

Low-temperature synthesis of SrAl2O4 by a modified sol-gel route: XRD and Raman characterization

Among other alkaline-earth aluminates, the monoclinic (M) polymorph of SrAl₂O₄ can be used as host material for Eu²⁺ luminescence based phosphors. With the aim of reducing the synthesis temperature of this polymorph, we have produced and characterized by XRD and Raman scattering solid solutions of the SrAl_2−xB_xO₄ system (x?0.3) obtained by two different methods, a ceramic route and a modified sol-gel synthesis. Though the addition of boron lowers the temperature of obtention of the M polymorph in both type of samples, lower B contents are needed to stabilize the M form as single phase for samples prepared by the sol-gel method than through the ceramic route. In the sol-gel method, the M polymorph can be obtained at temperatures as low as 1200 °C, with a Boron content of just 1%. Rietveld profile analysis allows us to conclude that coexistence of the monoclinic and hexagonal polymorphs of SrAl₂O₄ occurs for samples synthesized below an onset temperature of about 1000-1100 °C, that depends on the sample composition. Above those temperatures, only the monoclinic phase is formed.     

Fabrication and Characterization of Nanocomposite Flexible Membranes of PVA and Fe3O4

Composite polymer membranes of poly(vinyl alcohol) (PVA) and iron oxide (Fe₃O₄) nanoparticles were produced in this work. X-ray diffraction measurements demonstrated the formation of Fe₃O₄ nanoparticles of cubic structures. The nanoparticles were synthesized by a coprecipitation technique and added to PVA solutions with different concentrations. The solutions were then used to generate flexible membranes by a solution casting method. The size and shape of the nanoparticles were investigated using scanning electron microscopy (SEM). The average size of the nanoparticles was 20±9 nm. Raman spectroscopy and Fourier-transform infrared spectroscopy (FTIR) were utilized to investigate the structure of the membranes, as well as their vibration modes. Thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) demonstrated the thermal stability of the membranes and the crystallinity degree. Electrical characteristics of the thin membranes were examined using impedance spectroscopy as a function of the nanoparticles’ concentrations and temperatures. The resistivity of the fabricated flexible membranes was possible to adjust by controlled doping with suitable concentrations of nanoparticles. The activation energy decreased with the nanoparticles’ concentrations due to the increase in charge carriers’ concentrations. Therefore, the fabricated membranes may be applied for practical applications that involve the recycling of nanoparticles for multiple application cycles.     

Influence of the preparation conditions of Pd‐ZrO2 and AuPd‐ZrO2 nanoparticle–decorated functionalised MWCNTs: Electron spectroscopy study aided with the QUASES

The Pd, AuPd, and ZrO₂ nanoparticle–decorated functionalised multiwalled carbon nanotubes (f‐MWCNTs) were reported as efficient catalysts of formic acid (FA) electro‐oxidation. Different preparation conditions influence their chemical and structural properties analysed by X‐ray photoelectron spectroscopy aided with the quantitative analysis of surfaces by electron spectroscopy. Different reduction procedures such as NaBH₄, a polyol microwave‐assisted method (PMWA), and a high pressure microwave reactor (HPMWR) were applied for decorating ZrO₂/f‐MWCNTs with Pd and AuPd nanoparticles. The ZrO₂ nanoparticles are attached through oxygen groups to the surface of f‐MWCNTs. In NaBH₄ and HPMWR procedures, Pd nanoparticles precipitate predominantly on ZrO₂ of nearly nominal stoichiometry, whereas in PMWA procedure, Pd and AuPd nanoparticles precipitate predominantly on the surface of f‐MWCNTs, bridging with oxygen groups and ZrO_x (x < 2) and leading to Pd‐O‐Zr phase formation. Strong reducing procedures (NaBH₄ and FA) led to smaller Pd nanoparticle size, Pd oxide content, and PdO_x overlayer thickness in contrary to weak reduction procedures (HPMWR and PMWA). The highest content of Pd‐O‐Zr phase appeared for Pd predominant precipitation on ZrO₂ nanoparticles (HPMWR) in contrary to Pd and AuPd predominant precipitation on surface of f‐MWCNTs (NaBH₄ ~ FA > PMWA). Larger content of Pd‐O‐Zr phase in AuPd‐decorated ZrO₂/f‐MWCNTs in contrary to Pd‐decorated sample (PMWA) could be justified by different electronic properties of nanoparticles. The FA treatment of Pd and AuPd‐ZrO₂/f‐MWCNTs samples provided decreasing Pd oxide content, overlayer thickness, nanoparticle size, increasing nanoparticle surface coverage and density, amount of Pd‐O‐Zr, what results from reduction of oxygen groups bridging with Pd and ZrO_x nanoparticles, also through Pd‐O‐Zr phase.     

Pure cubic ZrO2 nanoparticles by thermolysis of a new precursor

Zirconia (ZrO₂) nanoparticles have been synthesized through the thermolysis of bis-aqua, tris-2-hydroxyacetophenato zirconium (IV) nitrate, [Zr(HAP)₃(H₂O)₂](NO₃), as a precursor in oleylamine (C₁₈H₃₇N) and triphenylphosphine (C₁₈H₁₅P). The combination of C₁₈H₃₇N and C₁₈H₁₅P was added to act as surfactants to control the particle size. C₁₈H₃₇N and C₁₈H₁₅P play an important role in preventing aggregation of ZrO₂ nanoparticles. The products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), photoluminescence spectroscopy (PL) and Fourier transform infrared (FT-IR) spectroscopy to depict the phase and morphology. The synthesized ZrO₂ nanoparticles have a cubic structure. The FT-IR spectrum showed the purity of obtained cubic phase ZrO₂ nanocrystals.     

Comparison of alkali-promoted ZrO2 catalysts towards carbon black oxidation

The effect of alkali metals deposition on zirconia has been studied in the oxidation of carbon black, considered as a model of diesel soot. The study of the influence of alkali content and alkali precursor was undertaken for K/ZrO₂, evidencing a better activity for a catalyst prepared with an atomic ratio K/Zr = 0.14 and from a nitrate precursor. Using the latter preparation conditions, alkali/ZrO₂ are found to be active in the oxidation of carbon black according the sequence ZrO₂ < Li/ZrO₂ < Na/ZrO₂ < K/ZrO₂ < Rb/ZrO₂ < Cs/ZrO₂. Alkali metals have an influence on the tetragonal–monoclinic crystalline modification. Alkali metals ions with low size tend to stabilize the tetragonal ZrO₂ phase whereas those with higher ionic radius favour the tetragonal–monoclinic modification. Fourier transform-infrared spectroscopy (FTIR) and temperature programmed reduction (TPR) measurements show that the catalytic activity partially depends on the presence of nitrate species stabilized in alkali/ZrO₂ even after calcination treatment at 600 °C. Nitrate species are more stable in the presence of alkali with high ionic radius than those of low size.     

Structural stability and electrochemical properties of Gd-doped ZrO2 nanoparticles prepared by sol–gel

Cubic, tetragonal and monoclinic Gd-doped zirconia nanoparticles with nominal composition Gd_xZr_1?xO₂ in the range 0 ≤ x ≤ 0.2, were prepared by annealing dried gels of Gd-containing zirconia at temperatures over the range between 450 and 1,300 °C. The synthesized zirconia-based nanoparticles with increased gadolinium load were characterized by X-ray powder diffraction, infrared and Raman spectroscopies, and transmission electron microscopy. The stabilization of the crystalline forms of Gd-doped ZrO₂ solid solutions depends on the amount of Gd dopant and the annealing temperature. For low Gd loads in Gd_xZr_1?xO₂ being x < 0.05, the tetragonal form is the single phase up to 1,100 °C, whereas the monoclinic is the crystalline form detected up to 1,300 °C. Within the range of compositions 0.05 ≤ x < 0.1, is the tetragonal the only stabilized zirconia crystalline structure over the whole range of temperature up to 1,300 °C. For higher Gd-contents, in the range 0.1 ≤ x ≤ 0.2, is the cubic zirconia form the only stable phase for the whole range of annealing temperatures. Solid-state electrochemistry of the gadolinium-doped zirconia performed by the voltammetry of microparticles approach allowed distinguishing different electrochemical answers of Gd cation associated with slightly different local coordination surrounding of cations. Enantioselective electrocatalytic effect of monoclinic Gd-doped ZrO₂ on the oxidation of l-(+)-tartaric acid and d-(?)-tartaric was also studied.     

Role of graphene in structural transformation of zirconium oxide

Fine powders of zirconium oxide (ZrO₂) were prepared using zirconium oxychloride by combustion method. The crystalline size of pure ZrO₂ was in range of 14–45 nm. Graphene was incorporated in ZrO₂ using graphene oxide as precursor and reducing it with hydrazine hydrate. X-Ray diffraction, Fourier transform infra-red spectroscopy, thermogravimetric analysis and Raman spectroscopy methods were used to characterize the samples. The role of graphene in structural transformation of ZrO₂ to monoclinic phase was clearly observed.     

Formation and dielectric properties of anodic oxide films on Zr–Al alloys

Zr–Al alloys containing up to 26 at.% aluminum, prepared by magnetron sputtering, have been anodized in 0.1 mol dm⁻³ ammonium pentaborate electrolyte, and the structure and dielectric properties of the resultant anodic oxide films have been examined by grazing incidence X-ray diffraction, transmission electron microscopy, Rutherford backscattering spectroscopy, and AC impedance spectroscopy. The anodic oxide film formed on zirconium consists of monoclinic and tetragonal ZrO₂ with the former being a major phase. Two-layered anodic oxide films, comprising an outer thin amorphous layer and an inner main layer of crystalline tetragonal ZrO₂ phase, are formed on the Zr–Al alloys containing 5 to 16 at.% aluminum. Further increase in the aluminum content to 26 at.% results in the formation of amorphous oxide layer throughout the thickness. The anodic oxide films become thin with increasing aluminum content, while the relative permittivity of anodic oxide shows a maximum at the aluminum content of 11 at.%. Due to major contribution of permittivity enhancement, the maximum capacitance of the anodic oxide films is obtained on the Zr–11 at.% Al alloy, being 1.7 times than on zirconium at the formation voltage of 100 V.