Tuning the surface potential of Ag surfaces by chemisorption of oppositely-oriented thiolated carborane dipoles

Two selected carboranethiol isomers were used to modify flat silver surfaces. Both isomers, 1,2-(HS)(2)-1,2-C(2)B(10)H(10) (a) and 9,12-(HS)(2)-1,2-C(2)B(10)H(10) (b), are relatively strong dipoles with two SH groups per molecule. They are both anchored to the surface via two SH groups per molecule. Topography and surface potential changes of the modified silver surfaces were studied using Scanning Kelvin Probe Force Microscopy (SKPFM). These measurements proved that both isomers are oppositely oriented on the surface. The former isomer increases, and the latter one decreases the surface potential of a modified silver film. The relative changes of the surface potential correlate well with the dipole moments of the isomers. Competitive chemisorption from a 1:1 mixture of both isomers shows that the isomer (a) is found in a significantly higher concentration on the surface than the isomer (b). This has been proved by both SKPFM and X-ray photoelectron spectroscopy (XPS) techniques. Additionally, contact angle measurements were carried out to characterise the modified surfaces, and these and XPS results show the presence of hydrophobic hydrocarbon contaminants.     

Carboranedithiols: building blocks for self-assembled monolayers on copper surfaces

Two different positional isomers of 1,2-dicarba-closo-dodecaboranedithiols, 1,2-(HS)(2)-1,2-C(2)B(10)H(10) (1) and 9,12-(HS)(2)-1,2-C(2)B(10)H(10) (2), have been investigated as cluster building blocks for self-assembled monolayers (SAMs) on copper surfaces. These two isomers represent a convenient system in which the attachment of SH groups at different positions on the skeleton affects their acidic character and thus also determines their reactivity with a copper surface. Isomer 1 exhibited etching of polycrystalline Cu films, and a detailed investigation of the experimental conditions showed that both the acidic character of SH groups and the presence of oxygen at the copper surface play crucial roles in how the surface reaction proceeds: whether toward a self-assembled monolayer or toward copper film etching. We found that each positional isomer requires completely different conditions for the preparation of a SAM on copper surfaces. Optimized conditions for the former isomer required the exposure of a freshly prepared Cu surface to vapor of 1 in vacuum, which avoided the presence of oxygen and moisture. Adsorption from a dichloromethane solution afforded a sparsely covered Cu(0) surface; isomer 1 effectively removes the surface copper(I) oxide, forming a soluble product, but apparently binds only weakly to the clean Cu(0) surface. In contrast, adsorption of the latter, less volatile isomer proceeded better from a dichloromethane solution than from the vapor phase. Isomer 2 was even able to densely cover the copper surface cleaned up by the dichloromethane solution of 1. Both isomers exhibited high capacity to remove oxygen atoms from the surface copper(I) oxide that forms immediately after the exposure of freshly prepared copper films to ambient atmosphere. Isomer 2 showed suppression of Cu film oxidation. A number of methods including X-ray photoelectron spectroscopy (XPS), X-ray Rutherford back scattering (RBS), proton-induced X-ray emission (PIXE) analysis, atomic force microscopy (AFM), cyclic voltammetry, and contact angle measurements were used to investigate the experimental conditions for the preparation of SAMs of both positional isomers on copper surfaces and to shed light on the interaction between these molecules and a polycrystalline copper surface.     

Photofragmentation of closo-carboranes part 1: Energetics of decomposition

The ionic fragmentation following B 1s and C 1s excitation of three isomeric carborane cage compounds [closo-dicarbadodecaboranes: orthocarborane (1,2-C2B10H12), metacarborane (1,7-C2B10H12), and paracarborane (1,12-C2B10H12)] is compared with the energetics of decomposition. The fragmentation yields for all three molecules are quite similar. Thermodynamic cycles are constructed for neutral and ionic species in an attempt to systemically characterize single-ion closo-carborane creation and fragmentation processes. Lower energy decomposition processes are favored. Among the ionic species, the photon-induced decomposition is dominated by BH+ and BH2(+) fragment loss. Changes in ion yield associated with core to bound excitations are observed.     

The influence of the molecular dipole on the electronic structure of isomeric icosahedral dicarbadodecaborane and phosphacarbadodecaborane molecular films

We compare the molecular films of three different isomers of closo-dicarbadodecaborane (orthocarborane (1,2-C2B10H12), metacarborane (1,7-C2B10H12), paracarborane (1,12-C2B10H12)) and two related icosahedral cage molecules, 1-phospha-2-carbadodecaborane (1,2-PCB10H11) and 1-phospha-7-carbadodecaborane (1,7-PCB10H11) adsorbed on a variety of substrates. While the experimental electronic structure from combined photoemission and inverse photoemission studies of the molecular films are in good agreement with semiempirical calculations for the isolated molecule, there is a shift in the chemical potential for each molecule. The experimental position of the molecular chemical potential implicates an influence of both interface and adsorbate dipole.     

Self-assembled 2D supramolecular networks of copper(I) carborane complexes through C-H..H-B dihydrogen bonding interactions

Three dinuclear copper(i) complexes with the formula [Cu(2)(mu-X)(2)(1,2-(P(i)Pr(2))(2)-1,2-C(2)B(10)H(10))(2)] (X = Cl (), Br (), I ()) containing the closo carborane diphosphine ligand 1,2-(P(i)Pr(2))(2)-1,2-C(2)B(10)H(10) have been prepared and characterized by elemental analysis, FT-IR and X-ray structure determination. The X-ray structure analyses revealed that the three complexes were isostructural and crystallized in the monoclinic system and space group C2/m. The carborane cage ligand was coordinated bidentately to the Cu(i) center through its two phosphorus atoms, and the coordination geometry around each copper atom was distorted tetrahedral. Two halogen atoms bridged the metal centers forming a dimer structure [Cu(2)(mu-X)(2)(1,2-(P(i)Pr(2))(2)-1,2-C(2)B(10)H(10))(2)], which were linked into 2D supramolecular networks through novel C-HH-B dihydrogen bonding interactions.     

Synthetic and structural studies on C-ethynyl- and C-bromo-carboranes

A high-yield preparation of the C-monoethynyl para-carborane, 1-Me(3)SiC[triple bond]C-1,12-C2B10H11, from C-monocopper para-carborane and 1-bromo-2-(trimethylsilyl)ethyne, BrC[triple bond]CSiMe(3) is reported. The low-yield preparation of 1,12-(Me3SiC[triple bond]C)2-1,12-C2B10H10 from the C,C'-dicopper para-carborane derivative with 1-bromo-2-(trimethylsilyl)ethyne, BrC[triple bond]CSiMe3, has been re-investigated and other products were identified including the C-monoethynyl-carborane 1-Me3SiC[triple bond]C-1,12-C2B10H11 and two-cage assemblies generated from cage-cage couplings. The contrast in the yields of the monoethynyl and diethynyl products is due to the highly unfavourable coupling process between 1-RC[triple bond]C-12-Cu-1,12-C2B10H10 and the bromoalkyne. The ethynyl group at the cage carbon C(1) strongly influences the chemical reactivity of the cage carbon at C(12)-the first example of the "antipodal effect" affecting the syntheses of para-carborane derivatives. New two-step preparations of 1-ethynyl- and 1,12-bis(ethynyl)-para-carboranes have been developed using a more readily prepared bromoethyne, 1-bromo-3-methyl-1-butyn-3-ol, BrC[triple bond]CCMe2OH. The molecular structures of the two C-monoethynyl-carboranes, 1-RC[triple bond]C-1,12-C2B10H11 (R = H and Me3Si), were experimentally determined using gas-phase electron diffraction (GED). For R = H (R(G) = 0.053) a model with C(5v) symmetry refined to give a C[triple bond]C bond distance of 1.233(5) A. For R = Me3Si (R(G) = 0.048) a model with C(s) symmetry refined to give a C[triple bond]C bond distance of 1.227(5) A. Molecular structures of 1,12-Br2-1,12-C2B10H10, 1-HC[triple bond]C-12-Br-1,12-C2B10H10 and 1,12-(Me(3)SiC[triple bond]C)2-1,12-C2B10H10 were determined by X-ray crystallography. Substituents at the cage carbon atoms on the C2B10 cage skeleton in 1-X-12-Y-1,12-C2B10H10 derivatives invariably lengthen the cage C-B bonds. However, the subtle substituent effects on the tropical B-B bond lengths in these compounds are more complex. The molecular structures of the ethynyl-ortho-carborane, 1-HC[triple bond]C-1,2-C2B10H11 and the ethene, trans-Me3SiBrC=CSiMe3Br are also reported.     

Untethered 4,1,2-MC(2)B(10) supraicosahedral metallacarboranes, their C,C'-dimethyl 4,1,6-, 4,1,8- and 4,1,12-MC(2)B(10) analogues, and DFT study of the (4,)1,2- to (4,)1,6-isomerisations of C(2)B(11) carboranes and MC(2)B(10) metallacarboranes

Reduction of the tethered carborane 1,2-μ-(CH(2)SiMe(2)CH(2))-1,2-closo-C(2)B(10)H(10) followed by metallation with {CpCo} or {(p-cymene)Ru} fragments affords both C,C'-dimethyl 4,1,2-MC(2)B(10) and 4,1,6-MC(2)B(10) species. DFT calculations indicate that the barriers to isomerisation of both 4-Cp-4,1,2-closo-CoC(2)B(10)H(12) and 4-(η-C(6)H(6))-4,1,2-closo-RuC(2)B(10)H(12) to their respective 4,1,6-isomers are too high for this to be the origin of the unexpected formation of 4,1,6-MC(2)B(10) products (in marked contrast to the related isomerisation of 1,2-closo-C(2)B(11)H(13) to 1,6-closo-C(2)B(11)H(13)), and, indeed, the 4,1,2-species are recovered unchanged from refluxing toluene. Equally, the DFT-calculated profile for the isomerisation of [7,8-nido-C(2)B(10)H(12)](2-) to [7,9-nido-C(2)B(10)H(12)](2-) suggests that the unexpected formation of 4,1,6-metallacarboranes is unlikely to result from isomerisation of a reduced (nido) carborane following desilylation. Instead, the source of the 4,1,6-MC(2)B(10) compounds is traced to desilylation of 1,2-μ-(CH(2)SiMe(2)CH(2))-1,2-closo-C(2)B(10)H(10) by Li or Na prior to reduction. The supraicosahedral metallacarboranes 1,8-Me(2)-4-Cp-4,1,8-closo-CoC(2)B(10)H(10), 1,12-Me(2)-4-Cp-4,1,12-closo-CoC(2)B(10)H(10) and 1,12-Me(2)-4-(p-cymene)-4,1,12-closo-RuC(2)B(10)H(10) are also reported with all new species characterised both spectroscopically and crystallographically.     

Decaborane thiols as building blocks for self-assembled monolayers on metal surfaces

Three nido-decaborane thiol cluster compounds, [1-(HS)-nido-B(10)H(13)] 1, [2-(HS)-nido-B(10)H(13)] 2, and [1,2-(HS)(2)-nido-B(10)H(12)] 3 have been characterized using NMR spectroscopy, single-crystal X-ray diffraction analysis, and quantum-chemical calculations. In the solid state, 1, 2, and 3 feature weak intermolecular hydrogen bonding between the sulfur atom and the relatively positive bridging hydrogen atoms on the open face of an adjacent cluster. Density functional theory (DFT) calculations show that the value of the interaction energy is approximately proportional to the number of hydrogen atoms involved in the interaction and that these values are consistent with a related bridging-hydrogen atom interaction calculated for a B(18)H(22)·C(6)H(6) solvate. Self-assembled monolayers (SAMs) of 1, 2, and 3 on gold and silver surfaces have been prepared and characterized using X-ray photoelectron spectroscopy. The variations in the measured sulfur binding energies, as thiolates on the surface, correlate with the (CC2) calculated atomic charge for the relevant boron vertices and for the associated sulfur substituents for the parent B(10)H(13)(SH) compounds. The calculated charges also correlate with the measured and DFT-calculated thiol (1)H chemical shifts. Wetting-angle measurements indicate that the hydrophilic open face of the cluster is directed upward from the substrate surface, allowing the bridging hydrogen atoms to exhibit a similar reactivity to that of the bulk compound. Thus, [PtMe(2)(PMe(2)Ph)(2)] reacts with the exposed and acidic B-H-B bridging hydrogen atoms of a SAM of 1 on a gold substrate, affording the addition of the metal moiety to the cluster. The XPS-derived stoichiometry is very similar to that for a SAM produced directly from the adsorption of [1-(HS)-7,7-(PMe(2)Ph)(2)-nido-7-PtB(10)H(11)] 4. The use of reactive boron hydride SAMs as templates on which further chemistry may be carried out is unprecedented, and the principle may be extended to other binary boron hydride clusters.     

Metallacarboranes as building blocks for polyanionic polyarmed aryl-ether materials

Polyanionic species have been obtained in high yield by a new route in the ring-opening reaction of cyclic oxonium [3,3'-Co(8-C4H8O2-1,2-C2B9H10)(1',2'-C2B9H11)] (2) by using carboxylic acids, Grignard reagents, and thiocarboranes as nucleophiles. The crystal structures of Na3(H2O)(C2H5OH)[1',3',5'-{3,3'-Co(8-O(CH2CH2O)2-1,2-C2B9H10)(1',2'-C2B9H11)}3-C6H3] and Na(H2O)[3,3'-Co(8-O(CH2CH2O)2C(O)CH3-1,2-C2B9H10)(1',2'-C2B9H11)] show that the chain contributes three or two oxygen atoms for coordination to Na(+), and interestingly, the [3,3'-Co(1,2-C2B9H11)2](-) moiety provides extra B-H coordination sites. These B-H...Na interactions in the solid state have also been confirmed by dynamic NMR studies in solution. These new polyanionic compounds that contain multiple carborane or metallacarborane clusters at their periphery may prove useful as new classes of boron neutron capture therapy compounds with enhanced water solubility and as a core to make a new class of dendrimers.     

Synthesis and luminescence spectroscopy of a series of [eta(5)-CpFe(CO)2] complexes containing 1,12-dicarba-closo-dodecaboranyl and -ylene ligands

Three new cyclopentadienyliron dicarbonyl compounds, 1-[eta(5)-CpFe(CO)(2)]-1,12-C(2)B(10)H(11), 1-[[eta(5)-CpFe(CO)(2)]-1,12-C(2)B(10)H(10)-12-yl](2)Hg, and 1,12-[eta(5)-CpFe(CO)(2)](2)-1,12-C(2)B(10)H(10), composed of 1,12-dicarba-closo-dodecaborane as a ligand precursor were synthesized and found to be luminescent. The uncoordinated 1,12-C(2)B(10)H(12) bridging ligand precursor is luminescent with a band maximum at 25180 cm(-1), while the iron complexes luminesce at lower energies in the range 13120-14210 cm(-1). The lowest energy excited electronic state in the iron complexes is assigned to a ligand field transition of the iron chromophore. Cyclic voltammetry of 1,12-[eta(5)-CpFe(CO)(2)](2)-1,12-C(2)B(10)H(10) displays two discrete one-electron oxidations, and the luminescence maximum is red shifted from that observed in 1-[eta(5)-CpFe(CO)(2)]-1,12-C(2)B(10)H(11). Both of these observations suggest that the iron-centered chromophores are weakly coupled. In contrast, the 1-[[eta(5)-CpFe(CO)(2)]-1,12-C(2)B(10)H(10)-12-yl](2)Hg complex is uncoupled as is evident from the single oxidation process observed with cyclic voltammetry. The extinction coefficient of 1,12-[eta(5)-CpFe(CO)(2)](2)-1,12-C(2)B(10)H(10) is six times that of 1-[eta(5)-CpFe(CO)(2)]-1,12-C(2)B(10)H(11), while the extinction coefficient of 1-[[eta(5)-CpFe(CO)(2)]-1,12-C(2)B(10)H(10)-12-yl](2)Hg is only twice that of 1-[eta(5)-CpFe(CO)(2)]-1,12-C(2)B(10)H(11). These spectroscopic properties are explained in terms of two coupled antiparallel transition dipole moments.     

Carborane radical anions: spectroscopic and electronic properties of a carborane radical anion with a 2n + 3 skeletal electron count

One-electron reduction of the well-known carborane 1,2-Ph2-1,2-C2B10H10 (1) gives rise to a stable carborane radical anion ([1]-) with a true 2n + 3 cluster electron count; the geometry of ([1]-) features an elongated C...C cage distance but no significant pi-bonding interactions between the cage and the phenyl substituents.     

Novel, highly selective gold nanoparticle patterning on surfaces using pure water

We present a simple, novel procedure to selectively deposit gold nanoparticles using pure water. It enables patterning of nanoparticle monolayers with a remarkably high degree of selectivity on flat as well as microstructured oxide surfaces. We demonstrate that water molecules form a thin "capping" layer on exposed thiol molecules within the mercaptan self-assembled layer. This reversible capping of water molecules locally "deactivates" the thiol groups, therewith inhibiting the binding of metallic gold nanoparticles to these specific areas. This amazing role of water molecules can be used as a tool to pattern flat as well as structured surfaces with gold nanoparticles.     

Synthesis, structure, and reactivity of 13-vertex carboranes and 14-vertex metallacarboranes

Syntheses, properties, and synthetic applications of 13-vertex closo- and nido-carboranes are reported. Reactions of the nido-carborane salt [(CH2)3C2B10H10]Na2 with dihaloborane reagents afforded 13-vertex closo-carboranes 1,2-(CH2)3-3-R-1,2-C2B11H10 (R = H (2), Ph (3), Z-EtCH=C(Et) (4), E-(t)BuCH=CH (5)). Treatment of the arachno-carborane salt [(CH2)3C2B10H10]Li4 with HBBr2.SMe2 gave both the 13-vertex carborane 2 and a 14-vertex closo-carborane (CH2)3C2B12H12 (8). On the other hand, the reaction of [C6H4(CH2)2C2B10H10]Li4 with HBBr2.SMe2 generated only a 13-vertex closo-carborane 1,2-C6H4(CH2)2-1,2-C2B11H11 (9). Electrophilic substitution reactions of 2 with excess MeI, Br2, or I2 in the presence of a catalytic amount of AlCl3 produced the hexa-substituted 13-vertex carboranes 8,9,10,11,12,13-X6-1,2-(CH2)3-1,2-C2B11H5 (X = Me (10), Br (11), I (12)). The halogenated products 11 and 12 displayed unexpected instability toward moisture. The 13-vertex closo-carboranes were readily reduced by groups 1 and 2 metals. Accordingly, several 13-vertex nido-carborane dianionic salts [nido-1,2-(CH2)3-1,2-C2B11H11][Li2(DME)2(THF)2] (13), [[nido-1,2-(CH2)3-1,2-C2B11H11][Na2(THF)4]]n (13a), [[nido-1,2-(CH2)3-3-Ph-1,2-C2B11H10][Na2(THF)4]]n (14), [[nido-1,2-C6H4(CH2)2-1,2-C2B11H11][Na2(THF)4]]n (15), and [nido-1,2-(CH2)3-1,2-C2B11H11][M(THF)5] (M = Mg (16), Ca (17)) were prepared in good yields. These carbon-atom-adjacent nido-carboranes were not further reduced to the corresponding arachno species by lithium metal. On the other hand, like other nido-carborane dianions, they were useful synthons for the production of super-carboranes and supra-icosahedral metallacarboranes. Interactions of 13a with HBBr2.SMe2, (dppe)NiCl2, and (dppen)NiCl2 gave the 14-vertex carborane 8 and nickelacarboranes [eta5-(CH2)3C2B11H11]Ni(dppe) (18) and [eta5-(CH2)3C2B11H11]Ni(dppen) (19), respectively. All complexes were fully characterized by various spectroscopic techniques and elemental analyses. Some were further confirmed by single-crystal X-ray diffraction studies.     

Synthesis, Structure and Characterization of a Novel Asymmetrical Half-sandwich Binuclear Iron Carborane Complex [η~5-C_5H_3(t-Bu)_2]_2Fe_2(CO)_3Se_2C_2B_(10)H_(10)

IntroductionThe chemistry of chalcogen organometalliccomplexs has become one of the most activebranches in modern chemistry[1] .Itnot only showsthe coordinate variability of organometalliccomplexes but also is applied to studying thereaction mechanism of biologic enzyme[2 ] and thecatalysis of dehydrogenation or hydrogenation inindustry[3] .It is known that transition metalcomplexes react with cyclopentadienyl orsubstituted cyclopentadienyl to form halfsandwichcomplexes with different structur…     

Sulfur, tin and gold derivatives of 1-(2'-pyridyl)-ortho-carborane, 1-R-2-X-1,2-C2B10H10 (R = 2'-pyridyl, X = SH, SnMe3 or AuPPh3)

Reaction of the lithium salt of 1-(2'-pyridyl)-ortho-carborane, Li[1-R-1,2-C(2)B(10)H(10)](R = 2'-NC(5)H(4)), with sulfur, followed by hydrolysis, gave the mercapto-o-carborane, 1-R-2-SH-1,2-C(2)B(10)H(10) which forms chiral crystals containing helical chains of molecules linked by intermolecular S-H...N hydrogen bonds. The cage C(1)-C(2) and exo C(2)-S bond lengths (1.730(3) and 1.775(2)[Angstrom], respectively) are indicative of exo S=C pi bonding. The tin derivative 1-R-2-SnMe(3)-1,2-C(2)B(10)H(10), prepared from Li[1-R-1,2-C(2)B(10)H(10)] and Me(3)SnCl, crystallises with no significant intermolecular interactions. The pyridyl group lies in the C(1)-C(2)-Sn plane, oriented to minimise the NSn distance (2.861(3)[Angstrom]). The tin environment is distorted trigonal bipyramidal with axial N and Me. The gold derivative 1-R-2-AuPPh(3)-1,2-C(2)B(10)H(10), prepared from Li[1-R-1,2-C(2)B(10)H(10)] and AuCl(PPh(3)), reveals no NAu interaction in its crystal structure.     

Palladium-Catalyzed Coupling of Ethynylated p-Carborane Derivatives: Synthesis and Structural Characterization of Modular Ethynylated p-Carborane Molecules

Methodology leading to a new class of rodlike p-carborane derivatives is described, involving the palladium-catalyzed coupling of B-iodinated p-carboranes with terminal alkynes. The products of these reactions contain an alkyne substituent at a boron vertex of the p-carborane cage. Reaction of closo-2-I-1,12-C(2)B(10)H(11) (1) with closo-2-(C&tbd1;CH)-1,12-C(2)B(10)H(11) (3) in the presence of pyrrolidine and catalytic quantities of bis(triphenylphosphine)palladium dichloride and cupric iodide yields 1,2-(closo-1',12'-C(2)B(10)H(11)-2'-yl)(2) acetylene (4). Oxidative coupling of 3 in the presence of cupric chloride in piperidine affords 1,4-(closo-1',12'-C(2)B(10)H(11)-2'-yl)(2)-1,3-butadiyne (5). Reaction of 2 molar equiv. of closo-2,9-I(2)-1,12-C(2)B(10)H(10) (6) withcloso-2,9-(C&tbd1;CH)(2)-1,12-C(2)B(10)H(10) (7) in the presence of pyrrolidine and catalytic quantities of bis(triphenylphosphine)palladium dichloride and cupric iodide yields closo-2,9-(closo-2'-I-9'-C&tbd1;C-1',12'-C(2)B(10)H(10))(2)-1,12-C(2)B(10)H(10) (8), a rigid, iodine-terminated carborod trimer in which the p-carborane cages are linked at the 2 and 9 B-vertices by alkyne (C&tbd1;C) bridges. The molecular structures of 5 and the previously described closo-2,9-(C&tbd1;CSiMe(3))(2)-1,12-C(2)B(10)H(10) (9) have been determined by X-ray crystallography. Crystallographic data are as follows: for 5, monoclinic, space group P2/a, a = 12.352(6) ?, b = 14.169 (6) ?, c = 12.384(5) ?, beta = 109.69(2) degrees, V = 2041 ?(3), Z = 4, R = 0.098, R(w)( )()= 0.135; for 9, monoclinic, space group C2/m, a = 22.111(4) ?, b = 7.565(2) ?, c = 6.943(2) ?, beta = 107.871(8) degrees, V = 1105 ?(3), Z = 2, R = 0.059, R(w)( )()= 0.090.     

硼中子捕获疗法中使用的1,2-C2B10H12异腈衍生物的结构和电子特性

利用密度泛函方法在B3LYP/6-31G(d)水平上对1,2-C2B10H12的两种异腈类衍生物的结构特性进行了研究. 结果表明, 1,2-C2B10H11NC的活性较强; 1,2-C2B10H11NC和1,2-C2B10H11CH2NC可以通过结构中的C4原子与过渡金属原子成键而形成碳硼烷异腈金属配合物. 1,2-C2B10H11NC和1,2-C2B10H11CH2NC的分子极性均比1,2-C2B10H12的弱, 这不利于它们在硼中子捕获疗法中的应用.     

4,5-Bis(diphenylthiophosphinoyl)-1,2,3-triazolate interaction with gold nanoparticles and flat surfaces to form self-assembled monolayers

The interaction of the 4,5-bis(diphenylthiophosphinoyl)-1,2,3-triazolate (SPTz⁻) with different gold surfaces was investigated (nanoparticles, an electrode, and flat sheets). Studies on binding affinity of this dithiophosphin-triazolate on a gold electrode were performed by cyclic voltammetry (CV). Voltammograms exhibit two reductive desorption and only one oxidative readsorption, indicating that once reabsorbed, the molecule achieves a unique conformation. The morphology and average size of modified gold nanoparticles were studied by transmission electron microscopy (TEM) (av. diameter of 5.9 ± 1.8 nm). Further characterization was made by UV-visible (UV-vis) spectroscopy showing surface plasmon resonance (SPR) at about 580 nm. The bonding configurations of SPTz⁻ on gold have also been investigated by comparing the FT-IR and FT-Raman spectra. The ³¹P{¹H} NMR spectrum of capped nanoparticles exhibited two sharp signals at 30.3 and 29.6 ppm and a very broad signal at 72.7 ppm. X-ray photoelectron spectroscopy (XPS) showed SPTz⁻ can accomplish a strong interaction with gold nanoparticles through bonds involving a sulfur atom and a nitrogen from the triazole ring with a free terminal PS group, forming self-assembled monolayers (SAM). This may allow subsequent functionalization through free S/N atoms of the formed SAMs. The SPTz⁻ packing led to a reduction in packing density that permits large spaces between adsorbed headgroups and the inclusion of carbon and oxygen impurities from small molecules; nevertheless, oxidized sulfur or nitrogen species were not detected, indicating the chemical stability of the obtained SAMs.     

Synthesis and characterization of diazonium functionalized nanoparticles for deposition on metal surfaces

Silica nanoparticles were surface-functionalized with diazonium groups. The reaction steps leading to the formation of the diazonium functionality were followed with IR and XPS, and the structure of the diazonium-functionalized nanoparticle was confirmed with solid state NMR. Nanoparticle size distribution was determined with DLS, SEM, and TEM. The nanoparticles were then covalently bonded to gold and iron surfaces. Their spatial distribution over the metal surface was analyzed by SEM. Diazonium modification of nanoparticles represents a new method for the covalent attachment of nanoparticles to metal surfaces.     

Detailed structural examinations of covalently immobilized gold nanoparticles onto hydrogen-terminated silicon surfaces

The modification of flat semiconductor surfaces with nanoscale materials has been the subject of considerable interest. This paper provides detailed structural examinations of gold nanoparticles covalently immobilized onto hydrogen-terminated silicon surfaces by a convenient thermal hydrosilylation to form Si-C bonds. Gold nanoparticles stabilized by omega-alkene-1-thiols with different alkyl chain lengths (C3, C6, and C11), with average diameters of 2-3 nm and a narrow size distribution were used. The thermal hydrosilylation reactions of these nanoparticles with hydrogen-terminated Si(111) surfaces were carried out in toluene at various conditions under N2. The obtained modified surfaces were observed by high-resolution scanning electron microscopy (HR-SEM). The obtained images indicate considerable changes in morphology with reaction time, reaction temperature, as well as the length of the stabilizing omega-alkene-1-thiol molecules. These surfaces are stable and can be stored under ambient conditions for several weeks without measurable decomposition. It was also found that the aggregation of immobilized particles on a silicon surface occurred at high temperature (> 100 degrees C). Precise XPS measurements of modified surfaces were carried out by using a Au-S ligand-exchange technique. The spectrum clearly showed the existence of Si-C bonds. Cross-sectional HR-TEM images also directly indicate that the particles were covalently attached to the silicon surface through Si-C bonds.