Use of hydrophobins in formulation of water insoluble drugs for oral administration

The poor water solubility of many drugs requires a specific formulation to achieve a sufficient bioavailability after oral administration. Suspensions of small drug particles can be used to improve the bioavailability. We here show that the fungal hydrophobin SC3 can be used to make suspensions of water insoluble drugs. Bioavailability of two of these drugs, nifedipine and cyclosporine A (CyA), was tested when administered as a SC3-based suspension. SC3 (in a 1:2 (w/w) drug:SC3 ratio) or 100% PEG400 increased the bioavailability of nifedipine to a similar degree (6 ± 2- and 4 ± 3-fold, respectively) compared to nifedipine powder without additives. Moreover, SC3 (in a 7:1 (w/w) drug:hydrophobin ratio) was as effective as a 20-fold diluted Neoral^® formulation by increasing bioavailability of CyA 2.3 ± 0.3-fold compared to CyA in water. Interestingly, using SC3 in the CyA formulation resulted in a slower uptake (p < 0.001 in T_max) of the drug, with a lower peak concentration (C_max 1.8 mg ml^?1) at a later time point (T_max 9 ± 2 h) compared to Neoral^® (C_max 2.2 mg ml^?1; T_max 3.2 ± 0.2). Consequently, SC3 will result in a more constant, longer lasting drug level in the body. Taken together, hydrophobins are attractive candidates to formulate hydrophobic drugs.     

Green synthesis of plant-stabilized Au nanoparticles for the treatment of gastric carcinoma

In this study, gold nanoparticles (AuNPs) were green synthesized using plant extract. The obtained nanoparticles (Au NPs) were characterized by advanced physical and chemical techniques like TEM, FTIR, UV–vis, SEM, XRD and EDX. SEM image displayed the quasi-spherical shaped nanoparticles of mean diameter 20–50 nm. All the particles were of uniform shape and texture. From the XRD pattern, four distinct diffraction peaks at 38.2°, 44.2°, 64.7° and 77.4° are indexed as (1 1 1), (2 0 0), (2 2 0) and (3 1 1) planes of fcc metallic gold. The in vitro cytotoxic and anti-gastric carcinoma effects of biologically synthesized Au NPs against cancer cell lines were assessed. The IC₅₀ of the Au NPs were 192, 149, 76 and 85 µg/mL against NCI-N87, MKN45, GC1401 and GC1436 gastric cancer cell lines. The anti-gastric carcinoma properties of the Au NPs could significantly remove the cancer cell lines in a time and concentration-dependent manner. So, the findings of the recent research show that biologically synthesized Au NPs might be used to cure cancer.     

Surface-enhanced Raman studies of bradykinin using colloidal gold

In this paper, bradykinin (BK), an endogenous peptide hormone, which is involved in a number of physiological and pathophysiological processes was deposited onto the colloidal Au nanoparticles. The surface-enhanced Raman spectroscopy (SERS) was used to determine the adsorption mode of BK under different environmental conditions, including: excitation wavelengths (514.5 nm and 785.0 nm), pH of aqueous sol solutions (from pH = 3 to pH = 11), and size of the colloidal nanoparticles (10, 20, and 50 nm). The metal surface plasmon of the colloidal suspended Au nanoparticles was examined by ultraviolet-visible (UV–vis) spectroscopy. The results showed that the C-terminal part of BK plays a crucial role in the adsorption process onto the colloidal suspended Au particles. The Phe^5/8 and Arg⁹ residues of BK mainly participate in the interactions with the colloidal Au nanoparticles. At acidic pH of the solution (pH = 3), the BK COO⁻ terminal group through the both oxygen atoms strongly binds to the Au nanoparticles. The Phe⁵/Phe⁸ rings adopt tilted orientation with respect to the colloidal Au nanoparticles with diameters of 10 and 20 nm. As the particle size increases to 50 nm, the flat orientation of the Phe ring(s) with respect to the Au nanoparticles is observed.     

Green biosynthesis of silver nanoparticles using Torreya nucifera and their antibacterial activity

Silver nanoparticles were biosynthesized with the aid of a novel and eco-friendly biological material Torreya nucifera. Temperature and extract concentration were found to influence the size and shape of the biosynthesized silver nanoparticles. Morphological images of biosynthesized nanomaterials revealed that the particles are in spherical shape and size ranging between 10 and 125 nm. Crystalline nature of nanoparticles in face centered cubic (fcc) structure was ensured by diffraction pattern peaks corresponding to (1 1 1), (2 0 0), (2 2 0) and (3 1 1) planes. Characterization of the biosynthesized nanoparticles was performed by the X-ray diffraction and Fourier Transform Infrared spectroscopy analyses. FT-IR analysis indicates that nanoparticles are bound to proteins through amine groups of the aminoacid. Furthermore the biosynthesized nanoparticles were found to be highly effective against Salmonella typhimurium bacterium, which validates its potential applications as antibacterial agents in drinking water treatment and in food packagings.     

A disposable amperometric enzyme immunosensor for rapid detection of Vibrio parahaemolyticus in food based on agarose/Nano-Au membrane and screen-printed electrode

Recent outbreaks of foodborne illnesses continue to support the need for rapid and sensitive methods for detection of foodborne pathogens. A disposable electrochemical immunosensor for detection of Vibrio parahaemolyticus (VP) based on the screen-printed electrode (SPE) coated with agarose/Nano-Au membrane and horseradish peroxidase (HRP) labeled VP antibody (HRP-anti-VP) has been developed in this paper. Then, the immunosensor was characterized by cyclic voltammetry (CV) and laser scanning confocal microscope (LSCM). The immunosensor was incubated with the one-step immunoassay format involving VP for 30 min at room temperature (25 ± 0.5 °C). The access of the active center of HRP catalyzing the oxidation reaction of thionine by H₂O₂ was partly inhibited by VP, which connected on the surface of the immunosensor by immunoreaction. VP could be quantificationally detected according to the shift of reduction current while CV was used as electrochemical means to detect the products of the enzymatic reaction. Under the optimum conditions of immunoreaction and electrochemical detection, VP was rapidly detectable by sigmoidal curve method and form a linear calibration between 10⁵ and 10⁹ cfu/ml with an associated detection limit of 7.374 × 10⁴ cfu/ml (S/N = 3). The immunosensor had acceptable specificity, reproducibility, stability and accuracy, indicating that the immunosensor could satisfy the need of practical sample detection.     

Nanoencapsulation and characterization of Albizia chinensis isolated antioxidant quercitrin on PLA nanoparticles

The plant isolated antioxidant quercitrin has been encapsulated on poly-d,l-lactide (PLA) nanoparticles by solvent evaporation method to improve the solubility, permeability and stability of this molecule. The size of quercitrin-PLA nanoparticles is 250 ± 68 nm whereas that PLA nanoparticles is 195 ± 55 nm. The encapsulation efficiency of nanoencapsulated quercitrin evaluated by HPLC and antioxidant assay is 40%. The in vitro release kinetics of quercitrin under physiological condition reveals initial burst release followed by sustained release. Less fluorescence quenching is observed with equimolar concentration of PLA encapsulated quercitrin than free quercitrin. The presence of quercitrin specific peaks on FTIR of five times washed quercitrin loaded PLA nanoparticles provides an extra evidence for the encapsulation of quercitrin into PLA nanoparticles. These properties of quercitrin nanomedicine provide a new potential for the use of such less useful highly active antioxidant molecule towards the development of better therapeutic for intestinal anti-inflammatory effect and nutraceutical compounds.     

Photoinduced magnetism in rubidium cobalt hexacyanoferrate Prussian blue analogue nanoparticles

Nanoparticles of rubidium cobalt hexacyanoferrate were synthesized using the organic ligand poly(vinylpyrrolidone) (PVP). The particles, with composition Rb_1.8Co₄[Fe(CN)₆]_3.2 · nH₂O determined from CHN combustion analysis and ICP-MS, have an average size of 10 nm ± 2 nm. Similar to bulk samples, the nanoparticles show evidence of ferrimagnetic ordering in DC magnetization below T_C ∼ 15 K, although the transition is broadened due to the small particle size and its dispersion. Upon illumination with white light at 5 K, the field-cooled DC magnetization of these particles increased 40%.     

An oxazoline derivatized Pybox ligand for Eu(III) and Tb(III) sensitization

A new Tb(III) dimer with an oxazoline-derivatized pyridine ligand, dimethyl-2,2′-(pyridine-2,6-diyl)bis(4,5-dihydrooxazole-4-carboxylate), has been isolated. This complex is highly luminescent and crystallizes in the triclinic P-1 space group with parameters a = 9.6167(2) Å, b = 11.6786(2) Å, c = 12.7548(3) Å, α = 70.026(1)°, β = 83.219(1)°, γ = 81.973(1)° and V = 1329.31(51)ų. Solution speciation studies showed the formation of monomeric species with 1:1 and 2:1 ligand-to-metal ion stoichiometries with log β₁₁ = 3.66 ± 0.41 and log β₂₁ = 6.16 ± 0.37 for Eu(III) and log β₁₁ = 3.56 ± 0.41 and log β₂₁ = 6.21 ± 0.38 for Tb(III). The quantum yields of emission Φ and luminescence lifetimes τ of solutions with 2:1 stoichiometry were 26.4 ± 0.5% and 1.47 ± 0.06 ms for Eu(III) and 41.0 ± 1.3% and 1.87 ± 0.06 ms for Tb(III).     

Ultra-sensitive cholesterol biosensor based on low-temperature grown ZnO nanoparticles

A high-sensitive cholesterol amperometric biosensor based on the immobilization of cholesterol oxidase (ChOx) onto the ZnO nanoparticles has been fabricated which shows a very high and reproducible sensitivity of 23.7 μA mM^?1 cm^?2, detection limit (based on S/N ratio) 0.37 ± 0.02 nM, response time less than 5 s, linear range from 1.0 to 500.0 nM and correlation coefficient of R = 0.9975. A relatively low value of enzyme’s kinetic parameter (Michaelis–Menten constant) ～4.7 mM has been obtained which indicates the enhanced enzymatic affinity of ChOx to Cholesterol. To the best of our knowledge, this is the first report in which such a very high-sensitivity and low detection limit has been achieved for the cholesterol biosensor by using ZnO nanostructures modified electrodes.     

Heat capacity and enthalpy of fusion of pyrimethanil laurate (C24H37N3O2)

Low-temperature heat capacities of pyrimethanil laurate (C₂₄H₃₇N₃O₂) were precisely measured with an automated adiabatic calorimeter over the temperature range between T = 78 K and T = 340 K. The sample was observed to melt at (321.52 ± 0.04) K. The molar enthalpy and entropy of fusion as well as the chemical purity of the compound were determined to be (67244 ± 11) J · mol⁻¹, (209.28 ± 0.02) J · mol⁻¹ · K⁻¹, (0.9943 ± 0.0004) mass fraction, respectively. The extrapolated melting temperature for the absolutely pure compound obtained from fractional melting experiments was (322.264 ± 0.006) K.     

Transformation of South African coal fly ash into ZSM-5 zeolite and its application as an MTO catalyst

This study presents a way of using South African coal fly ash by extracting metals such as Al and Fe with concentrated sulphuric acid, and then using the solid residue as a feedstock for the synthesis of ZSM-5 zeolite. The percentage of aluminium and iron oxides decreased from 28.0 ± 0.2% and 5.0 ± 0.1% in coal fly ash to 24.6 ± 0.1% and 1.6 ± 0.01% in the acid treated coal fly ash respectively. The fly ash-based zeolite ZSM-5 sample synthesised from the solid residue after extraction of Al and Fe, contained 62% of ZSM-5 zeolite pure phase with a number of Brønsted acid site density of 0.61 mmol per g_zeolite.By properly treating the as-prepared coal fly ash-based ZSM-5 zeolite, an active and selective methanol-to-olefins acid catalyst could be designed, leading to full methanol conversion during 15 h on stream. The optimised catalyst exhibited a cumulative methanol conversion capacity of 71 g(MeOH_converted)/g(catalyst) and a light olefin productivity of 21 g(C₂₌–C₄₌)/g(catalyst).     

Electrochemical determination of rosiglitazone by square-wave adsorptive stripping voltammetry method

Square-wave adsorptive stripping voltammetry technique was used to determine rosiglitazone (ROS) on the hanging mercury dropping electrode (HMDE) surface, in Britton Robinson buffer, pH = 5. The voltammetric cathodic peak was observed at ?1520 mV vs. Ag/AgCl reference electrode. The voltammetric peak response was characterized with respect to pH, supporting electrolyte, accumulation potential, preconcentration time, scan rate, frequency, pulse amplitude, surface area of the working electrode and the convection rate. Under optimal conditions, the voltammetric current is proportional to the concentration of ROS over the concentration range of 5 × 10^?8–8 × 10^?7 mol l^?1 (r = 0.9899) with a detection limit of 3.2 × 10^?11 mol l^?1 using 120 s accumulation time. The developed SW-AdSV procedure showed a good reproducibility, the relative standard deviation RSD% (n = 10) at a concentration level of 5 × 10^?7 mol l^?1 was 0.33%, whereas the accuracy was 101% ± 1.0. The proposed method was successfully applied to assay the drug in the human urine and plasma samples with mean recoveries of 90 ± 0.71% and 86 ± 1.0%, respectively.     

Synthesis and characterization of ZnO nanoparticles by thermal decomposition of a curcumin zinc complex

ZnO nanoparticles were generated by thermal decomposition of a binuclear zinc (II) curcumin complex as single source precursor. Thermal behavior of the precursor showed a considerable weight loss at about 374 °C by an exothermic reaction with a maximum weight loss rate of 14%/min. Complete decomposition of precursor was observed within 49 min with a heating rate of 10 °C/min. Synthesized nanoparticles have been characterized by X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy and selected area electron diffraction microscopy. Results revealed monodispersed hexagonal zincite structure with an average size of 117 ± 4 nm.     

Energetic effects of ether and ketone functional groups in 9,10-dihydroanthracene compound

The energetic effects caused by replacing one of the methylene groups in the 9,10-dihydroanthracene by ether or ketone functional groups yielding xanthene and anthrone species, respectively, were determined from direct comparison of the standard (p° = 0.1 MPa) molar enthalpies of formation in the gaseous phase, at T = 298.15 K, of these compounds. The experimental static-bomb combustion calorimetry and Calvet microcalorimetry and the computational G3(MP2)//B3LYP method were used to get the standard molar gas-phase enthalpies of formation of xanthene, (41.8 ± 3.5) kJ · mol^?1, and anthrone, (31.4 ± 3.2) kJ · mol^?1. The enthalpic increments for the substitution of methylene by ether and ketone in the parent polycyclic compound (9,10-dihydroanthracene) are ?(117.9 ± 5.5) kJ · mol^?1 and ?(128.3 ± 5.4) kJ · mol^?1, respectively.     

Photocatalytic activity of TiO2 nanotube layers loaded with Ag and Au nanoparticles

Ag and Au nanoparticles were found to significantly enhance the photocatalytic activity of self-organized TiO₂ nanotubular structures. The catalyst systems are demonstrated to be highly efficient for the UV-light induced photocatalytic decomposition of a model organic pollutant – Acid Orange 7. The metallic nanoparticles with a diameter of ∼10 ± 2 nm (Ag) and ∼28 ± 3 nm (Au) were attached to a nanotubular TiO₂ layer that consists of individual tubes of ∼100 nm of diameter, ∼2 μm in length and approx. 15 nm of wall thickness. Both metal particle catalyst systems enhance the photocatalytic decomposition significantly more on the nanotubes support than placed on a compact TiO₂ surface.     

Destabilization in the isomeric nitrobenzonitriles: an experimental thermochemical study

The enthalpies of combustion and of sublimation, respectively, of the three isomeric nitrobenzonitriles have been measured: o-, {(−3456.3±2.9), (88.1±1.4)} kJ·mol⁻¹; m-, {(−3442.8±3.3), (92.8±0.3)} kJ·mol⁻¹; p-, {(−3448.2±3.6), (91.1±1.3)} kJ·mol⁻¹. In turn, from these values, the standard molar enthalpies of formation for the condensed and gaseous state, respectively, have been derived: o-, {(130.1±3.1), (218.2±3.4)} kJ·mol⁻¹; m-, {(116.5±3.5), (209.3±3.5)} kJ·mol⁻¹; p-, {(122.0±3.8), (213.1±4.0)} kJ·mol⁻¹. Destabilization energies associated with the presence of the two electron-withdrawing groups have been determined, for o-, m-, and p-nitrobenzonitrile, {(17.6±4.1), (8.7±4.2), and (12.5±4.6)} kJ·mol⁻¹, respectively, and are consistent with those obtained for the corresponding sets of isomeric methyl benzenedicarboxylates, dicyanobenzenes, dinitrobenzenes, and (neutral and ionized) nitrobenzoic acids.     

The standard molar enthalpy of sublimation ofη5-bis-pentamethylcyclopentadienyl iron measured with an electrically calibrated vacuum-drop sublimation microcalorimetric apparatus

A heat-flow Calvet microcalorimeter was adapted for the measurement of sublimation enthalpies by the vacuum-drop method, with samples of masses in the range 1 mg to 5 mg. The electrically calibrated apparatus was tested by determining the enthalpies of sublimation of benzoic acid and ferrocene, at T =  298.15 K. The obtained results, Δ_cr^gH_m^o(C₇H₆O₂)  =  (88.3  ±  0.5)kJ · mol ^− 1and Δ_cr^gH_m^o(C₁₀H₁₀Fe) =  (73.3  ±  0.1)kJ · mol ^− 1, are in excellent agreement with the corresponding values recommended in the literature. Subsequent application of the apparatus to the determination of the enthalpy of sublimation of η⁵-bis-pentamethylcyclopentadyenyl iron, at T =  298.15 K, led to Δ_cr^gH_m^o(C₂₀H₃₀Fe)  =  (96.8  ±  0.6)kJ · mol ^− 1.     

On the kinetics of thermal electron attachment to perfluoroethers

In this Letter we report the results of the measurements of the rate coefficients for thermal attachment to several perfluoroethers namely perfluorodiglyme (C₆F₁₄O₃), perfluorotriglyme (C₈F₁₈O₄), perfluoropolyether (CF₃–(OCF(CF₃)CF₂)_n–(OCF₂)_m–OCF₃) and perfluorocrownether ((C₂F₄O)₅). Rate coefficients were obtained under thermal conditions in the temperature range 298–378 K. The increase of the rates with temperature follows the Arrhenius law and the activation energies have been obtained from the slope of the ln(k) vs. 1/T. The respective values of the rate coefficients (at 298 K) and activation energies are as follows: 7.7 ± 1.2 × 10^?11 cm³ s^?1 (0.18 ± 0.005 eV), 6.7 ± 2.1 × 10^?11 cm³ s^?1 (0.25 ± 0.004 eV), 2.1 ± 0.2 × 10^?10 cm³ s^?1 (0.16 ± 0.010 eV), 3.1 × 10^?11 cm³ s^?1 (0.27 ± 0.003 eV) for C₆F₁₄O₃, C₈F₁₈O₄, CF₃–(OCF(CF₃)CF₂)_n–(OCF₂)_m–OCF₃ and (C₂F₄O)₅.     

High-temperature calorimetry of zirconia: Heat capacity and thermodynamics of the monoclinic–tetragonal phase transition

The high-temperature heat capacity of zirconia was directly measured by differential scanning calorimetry between T = (1050 and 1700) K and derived from the heat content measured by transposed temperature drop calorimetry between T = (970 and 1770) K, including the monoclinic–tetragonal (m–t) phase transition region. The enthalpy and entropy of the m–t phase transition are (5.43 ± 0.31) kJ · mol⁻¹ and (3.69 ± 0.21) J · K⁻¹ · mol⁻¹, respectively. Values of thermodynamic functions are provided from room temperature to 2000 K.     

Facile synthesis and properties of ZnFe2O4 and ZnFe2O4/polypyrrole core-shell nanoparticles

We demonstrated that ZnFe₂O₄/polypyrrole core-shell nanoparticles could be facilely synthesized via in situ chemical oxidative polymerization of pyrrole monomers on the surface of ZnFe₂O₄ nanoparticles. The shell thickness of core-shell nanoparticles could be easily controlled by adjusting the amount of pyrrole monomers. The phase structures, morphologies and properties of the as-prepared products were investigated by XRD, TEM, SEM, VSM, and FTIR spectra. Magnetic studies revealed that the saturation magnetization (M_s) and coercivity (H_c) of ZnFe₂O₄/PPy core-shell nanoparticles is 17.8 emu/g and 130 Oe, respectively. The electromagnetic characteristics of products showed that ZnFe₂O₄/PPy core-shell nanoparticles exhibit excellent microwave absorption performance than ZnFe₂O₄ nanoparticles, such as more powerful absorbing property and wider electromagnetic wave absorbing frequency band due to the proper matching of the permittivity and the permeability of ZnFe₂O₄/PPy core-shell nanoparticles.