Determination of human serum albumin using aurothiomalate as electroactive label

A new electroactive label has been used to monitor immunoassays in the determination of human serum albumin (HSA) using glassy-carbon electrodes as supports for the immunological reactions. The label was a gold(I) complex, sodium aurothiomalate, which was bound to rabbit IgG anti-human serum albumin (anti-HSA-Au). The HSA was adsorbed on the electrode surface and the immunological reaction with gold-labelled anti-HSA was then performed for one hour by non-competitive or competitive procedures. The gold(I) bound to the anti-HSA was electrodeposited in 0.1 mol L⁻¹ HCl at −1.00 V for 5 min then oxidised in 0.1 mol L⁻¹ H₂SO₄ solution at +1.40 V for 1 min. Silver electrodeposition at −0.14 V for 1 min followed by anodic stripping voltammetry were then performed in aqueous 1.0 mol L⁻¹ NH₃–2.0×10⁻⁴ mol L⁻¹ AgNO₃. For both non-competitive and competitive formats, calibration plots in the ranges 5.0×10⁻¹⁰ to 1.0×10⁻⁸ mol L⁻¹ and 1.0×10⁻¹⁰ to 1.0×10⁻⁹ mol L⁻¹ HSA, respectively, with estimated detection limits of 1.5×10⁻¹⁰ mol L⁻¹ (10 ng mL⁻¹) and 1.0×10⁻¹⁰ mol L⁻¹ (7 ng mL⁻¹), respectively, were obtained. Levels of HSA in two healthy volunteer urine samples were also evaluated, using both immunoassay formats.     

Resonance Rayleigh scattering spectra of tetracycline antibiotic–Cu(II)–titan yellow systems and their applications in analytical chemistry

Tetracycline antibiotics (TCs) such as doxycycline (DOTC), chlortetracycline (CTC), oxytetracycline (OTC), and tetracycline (TC) react with Cu(II) in pH 3.5 BR buffer medium to form 1:1 cationic chelates, which further react with titan yellow to form 2:1 ion association complexes. These result in great enhancement of resonance Rayleigh scattering (RRS) and the appearance of new RRS spectra. The ion association complexes of DOTC, CTC, OTC, and TC have similar spectral characteristics and their maximum RRS wavelengths are all located at 464 nm. The quantitative determination ranges and the detection limits (3σ) of the four TCs are 0.037–4.8 μg mL⁻¹ and 11.2 ng mL⁻¹ for DOTC, 0.041–5.2 μg mL⁻¹ and 12.4 ng mL⁻¹ for CTC, 0.050–4.8 μg mL⁻¹ and 15.1 ng mL⁻¹ for TC, and 0.088–5.0 μg mL⁻¹ and 26.3 ng mL⁻¹ for OTC, respectively. The optimum reaction conditions, the effects of foreign substances, the structure of ternary complexes, and the reaction mechanism are discussed. A sensitive, rapid, and simple RRS method for the determination of DOTC has been developed.     

Analysis of spectinomycin in fermentation broth by reversed-phase chromatography

A pre-column derivatized high-performance liquid chromatographic (HPLC) method with ultraviolet-visible detection was developed to measure the concentrations of spectinomycin in fermentation broth. Derivatization reagents, 2,4-dinitrophenylhydrazine in acetonitrile (5 mg mL⁻¹) and trifluoroacetic acid in acetonitrile (0.8 mol L⁻¹), were added to an aliquot of the fermentation broth, and the mixture was incubated for 60 min at 70°C. The resulting derivative was separated from other compounds by isocratic elution in a reversed-phase column Zorbax SB-C18 (250 mm × 4.6 mm, 5 μm). Mobile phase consisted of acetonitrile, tetrahydrofuran, and water (φ _r = 40: 35: 25) and the flow rate was 1.0 mL min⁻¹. The detection wavelength was 415 nm. The standard curve for spectinomycin sulfate was linear with correlation coefficients of 0.9997 in the range of 25 μg mL⁻¹ to 600 μg mL⁻¹. The relative standard deviation values ranged from 0.43 % to 2.18 % depending on the concentration of samples. The average recovery was 101.5 %. The limit of detection was 50 ng mL⁻¹.     

Simultaneous determination of phenylenediamine isomers and dihydroxybenzene isomers in hair dyes by capillary zone electrophoresis coupled with amperometric detection

The simultaneous determination of three isomers of phenylenediamines (o, m, and p-phenylenediamine) and two isomers of dihydroxybenzenes (catechol and resorcinol) in hair dyes was performed by capillary zone electrophoresis coupled with amperometric detection (CZE–AD). The effects of working electrode potential, pH and concentration of running buffer, separation voltage, and injection time on CZE–AD were investigated. Under the optimum conditions the five analytes could be perfectly separated in 0.30 mol L⁻¹ borate–0.40 mol L⁻¹ phosphate buffer (pH 5.8) within 15 min. A 300 μm diameter platinum electrode had good responses at +0.85 V (versus SCE) for the five analytes. Their linear ranges were from 1.0 × 10⁻⁶ to 1.0 × 10⁻⁴ mol L⁻¹ and the detection limits were as low as 10⁻⁷ mol L⁻¹ (S/N = 3). This working electrode was successfully used to analyze eight kinds of hair dye sample with recoveries in the range 91.0–108.0% and RSDs less than 5.0%. These results demonstrated that capillary zone electrophoresis coupled with electrochemical detection using a platinum working electrode as detector was convenient, highly sensitive, highly repeatable and could be used in the rapid determination of practical samples. Figure Electropherograms obtained from 10 mg mL⁻¹ hair dye sample solutions at a platinum working electrode under optimum CZE–AD conditions: (a) natural black (I), (b) golden: (1) p-phenylenediamine, (2) m-phenylenediamine, (3) o-phenylenediamine, (4) resorcinol, and (5) catechol     

The electrochemical properties of dopamine,epinephrine and their simultaneous determination at a poly(L-methionine) modified electrode

A poly(L-methionine) modified electrode, fabricated by electrochemical immobilization of the L-methionine on a glassy carbon electrode, was used for simultaneous determination of dopamine and epinephrine through cyclic voltammetry. The electrochemical properties of dopamine and epinephrine have been investigated. This sensor gave two separated cathodic peaks at −0.282 and 0.112 V for EP and DA, respectively. A linear response was obtained in the range of 5.0 × 10⁻⁷ to 1.0 × 10⁻⁴ mol l⁻¹ for epinephrine, and 1.0 × 10⁻⁶ to 5.0 × 10⁻⁴ mol l⁻¹ for dopamine. The detection limits were 3.6 × 10⁻⁷ mol l⁻¹ and 4.2 × 10⁻⁷ mol l⁻¹ for epinephrine and dopamine, respectively. This method was successfully applied for simultaneous determination of dopamine and epinephrine in human urines. The text was submitted by the authors in English.     

Simultaneous Determination of Lidocaine, Proline and Lomefloxacin in Human Urine by CE with Electrochemiluminescence Detection

A new method was developed for the simultaneous determination of lidocaine, proline and lomefloxacin in human urine by capillary electrophoresis-electrochemiluminescence detection with Ru(bpy)₃ ²⁺. Conditions of the separation and detection were investigated and optimized. It was proved that 20 mM phosphate buffer at pH 6.7 could achieve the most favorable resolution, and the high sensitivity of detection was obtained by using the detection potential at 1.15 V and 5 mM Ru(bpy)₃ ²⁺–60 mM phosphate buffer at pH 7.6 in the detection reservoir. The detection limits were 0.02 μg mL⁻¹ for lidocaine, 0.03 μg mL⁻¹ for proline and 0.06 μg mL⁻¹ for lomefloxacin. Relative standard deviations of the ECL intensity and the migration time were 3.5 and 1.1% for 6 μg mL⁻¹ lidocaine, 3.2 and 1.0% for 6 μg mL⁻¹ proline and 3.7 and 1.2% for 6 μg mL⁻¹ lomefloxacin, respectively. A baseline separation for lidocaine, proline and lomefloxacin was achieved within 360 s. The developed method was successfully applied to determine the amounts of lidocaine, proline and lomefloxacin in human urine. The recovery and RSD were in the range of 93.3–97.2 and 3.8–4.9%, respectively.     

Study of a toxin–alkaline phosphatase conjugate for the development of an immunosensor for tetrodotoxin determination

This paper describes a direct competitive immunoenzymatic spectrophotometric assay (ELISA) for tetrodotoxin (TTX) determination and the adaptation of this method for use in an electrochemical assay format. The novelty of this work involves the use of the antigen labelled with alkaline phosphatase (AP); this conjugate was prepared in our laboratory as there is no commercially available conjugate of any kind for TTX. The new conjugate was characterized in terms of its affinity for the specific antibody as well as the residual concentration and the residual activity of the enzyme (AP) incorporated as label. The proposed method based on the new conjugate showed satisfactory results for TTX determination: for the spectrophotometric method the dynamic range was 4–15 ng mL⁻¹ with a limit of detection (LOD) of 2 ng mL⁻¹ (R=0.9247), whereas for the electrochemical protocol the dynamic range was 2–50 ng mL⁻¹ and the LOD was1 ng mL⁻¹.     

Simultaneous determination of the advanced glycation end product <Emphasis Type="Italic">N</Emphasis><Superscript>ɛ</Superscript>-carboxymethyllysine and its precursor,lysine, in exhaled breath condensate using isotope-dilution–hydrophilic-interaction liquid chromatography coupled to tandem mass spectrometry

Analysis of biomarkers in exhaled breath condensate (EBC) is a non-invasive method for investigating the effects of different diseases or exposures, on the lungs and airways. N ^ɛ-carboxymethyllysine (CML) is an important biomarker of advanced glycation end products (AGEs). A method has been developed for simultaneous determination of CML and its precursor, the amino acid lysine, in exhaled breath condensate (EBC). After addition of labelled internal standards (d-4-CML; d-4-lysine), the EBC was concentrated by freeze-drying. Separation and detection of the analytes were performed by hydrophilic-ion liquid chromatography coupled with tandem mass-spectrometric detection (HILIC–MS–MS). The limits of quantification were 10 pg mL⁻¹ EBC and 0.5 ng mL⁻¹ EBC for CML and lysine, respectively. The relative standard deviation of the within-series precision was between 2.8 and 7.8% at spiked concentrations between 40 and 200 pg mL⁻¹ for CML and between 6 and 20 ng mL⁻¹ for lysine. Accuracy for the analytes ranged between 89.5 and 133%. The method was used for the analysis of EBC samples from ten healthy persons from the general population and ten persons receiving dialysis. CML and lysine were detected in all EBC samples with median values of 19 pg mL⁻¹ CML and 11.9 ng mL⁻¹ lysine in EBC of healthy persons and 25 pg mL⁻¹ CML and 9.5 ng mL⁻¹ lysine in EBC of dialysis patients.     

Fluorescence enhancement of the protein–curcumin–sodium dodecyl benzene sulfonate system and protein determination

Protein can greatly enhance the fluorescence of curcumin (CU) in the presence of sodium dodecyl benzene sulfonate (SDBS). Experiments indicate that under the optimum conditions, the enhanced intensity of fluorescence is proportional to the concentration of proteins in the range of 0.0050–20.0 μg mL⁻¹ for bovine serum albumin (BSA), 0.080–20.0 μg mL⁻¹ for human serum albumin (HSA), and 0.040–28.0 μg mL⁻¹ for egg albumin (EA). Their detection limits (S/N=3) are 1.4 ng mL⁻¹, 20 ng mL⁻¹, and 16 ng mL⁻¹, respectively. The method has been satisfactorily used for the determination of proteins in actual samples. In comparison with most of fluorimetric methods, this method is quick and simple, has high sensitivity and good stability. The interaction mechanism is also studied.     

Determination of eight penicillins in serum from cattle and pigs by generic HPLC method

Summary An HPLC method was developed for determination of amoxicillin, penicillin G, penicillin V, ampicillin, oxacillin, cloxacillin, nafcillin and dicloxacillin in serum from pigs and cattle. Serum was cleaned up by solid-phase extraction (SPE), ultra-filtered and derivatised. The method was linear in the range tested up to 2000 ng mL⁻¹ of individual penicillins in serum. Limits of detection were 11–14 ng mL⁻¹. Mean recoveries were 90–103% in the range 20–2000 ng mL⁻¹. The relative repeatability, standard deviation was <10% at 20 ng mL⁻¹ level and <6% in the range 100–2000 ng mL⁻¹.     

HPLC Determination of DCJW in Rat Plasma and Its Application to Pharmacokinetics Studies

A high-performance liquid chromatography–UV method for determining DCJW concentration in rat plasma was developed. The method described was applied to a pharmacokinetics study of intramuscular injection in rats. The plasma samples were deproteinized with acetonitrile in a one-step extraction. The HPLC assay was carried out using a VP-ODS column and the mobile phase consisting of acetonitrile–water (80:20, v/v) was used at a flow rate of 1.0 mL min⁻¹ for the effective eluting DCJW. The detection of the analyte peak area was achieved by setting a UV detector at 314 nm with no interfering plasma peak. The method was fully validated with the following validation parameters: linearity range 0.06–10 μg mL⁻¹ (r > 0.999); absolute recoveries of DCJW were 97.44–103.46% from rat plasma; limit of quantification, 0.06 μg mL⁻¹ and limit of detection, 0.02 μg mL⁻¹. The method was further used to determine the concentration–time profiles of DCJW in the rat plasma following intramuscular injection of DCJW solution at a dose of 1.2 mg kg⁻¹. Maximum plasma concentration (C _max) and area under the plasma concentration–time curve (AUC) for DCJW were 140.20 ng mL⁻¹ and 2405.28 ng h mL⁻¹.     

Simple HPLC method for simultaneous determination of acetaminophen, caffeine and chlorpheniramine maleate in tablet formulations

Summary A simple, rapid and accurate, routine-HPLC method is described for simultaneous determination of acetaminophen, caffeine and chlorpheniramine maleate in a new tablet formulation Chromatographic separation of the three pharmaceuticals was achieved on a Hypersil CN column (150×5.0 mm, 5 μm) using a mobile phase comprising a mixture of acetonitrile, an ion-pair solution and tetrahydrofuran (13:14:87, v/v,pH4.5). The flow-rate was changed from 1.0 mL min⁻¹ (in 0≈7.5 min) to 1.8 mL min⁻¹ (after 3.5 min). was complete in <10 min. The method was validated for system suitability, linearity, accuracy, precision, limits of detection and quantitation, and robustness. Linearity, accuracy and precision were found to be acceptable over the ranges 31.6≈315.8 μg mL⁻¹ for acetaminophen, 9.5≈94.6 μg mL⁻¹ for caffeine and 1.4≈13.8 μg mL⁻¹ for chlorpheniramine maleate.     

Determination of phenols in waters using micro-pumped multicommutation and spectrophotometric detection: an automated alternative to the standard procedure

An automated and greener spectrophotometric procedure has been developed for the determination of phenol in water at 700 nm. The method uses the reaction between phenol, sodium nitroprusside, and hydroxylamine hydrochloride in a buffered medium at pH 12.3. The flow manifold comprises four solenoid micro-pumps employed for sample and reagent introduction into the reaction coil and to transport the colored product formed to the detector. The linear dynamic range was 50–3,500 ng mL⁻¹ (R = 0.99997; n = 6) and the method provided a limit of detection (3σ) of 13 ng mL⁻¹. The sampling throughput was estimated to be 65 measurements per hour and the coefficient of variation was 0.5% (n = 10) for a 1.0 μg mL⁻¹ phenol concentration. Recoveries of 92–105% were obtained for phenol determination in spiked water samples at concentration levels from 50 to 5,000 ng mL⁻¹. The use of multicommutation reduced the reagent consumption 25-fold, the sample consumption 225-fold, and the waste generation 30-fold compared with the batch procedure. The proposed method is an environmentally friendly alternative to the official 4-aminoantipyrine method since it avoids the use of chloroform.     

Separation of L-DOPA and four metabolites in plasma using a porous graphitic carbon column in capillary liquid chromatography

Summary A sensitive HPLC method with marbofloxacin (MAR) as internal standard and fluorescence detection is described for the analysis of ofloxacin (OFL) enantiomers in plasma samples. Plasma samples were prepared by adding phosphate buffer (pH 7.4, 0.1m), then extracted with trichloromethane.S-OFL,R-OFL, and the internal standard were separated on a reversed-phase column with water-methanol, 85.5∶14.5, as mobile phase. The concentrations ofS-OFL andR-OFL eluting from the column (retention times 7.5 and 8.7 min, respectively) were monitored by fluorescence detection withλ _ex = 331 andλ _em = 488 nm. The detection and quantitation limits were 10 and 20 ng mL⁻¹, respectively, forS-OFL and 11 and 21 ng mL⁻¹ forR-OFL. Response was linearly related to concentration in the range 10 to 2500 ng mL⁻¹. Recovery was close to 93% for both compounds. The method was applied to determination of the enantiomers of OFL in plasma samples collected during pharmacokinetic studies.     

Voltammetry and amperometric detection of tetracyclines at multi-wall carbon nanotube modified electrodes

The voltammetric behaviour and amperometric detection of tetracycline (TC) antibiotics at multi-wall carbon nanotube modified glassy carbon electrodes (MWCNT-GCE) are reported. Cyclic voltammograms of TCs showed enhanced oxidation responses at the MWCNT-GCE with respect to the bare GCE, attributable to the increased active electrode surface area. Hydrodynamic voltammograms obtained by flow-injection with amperometric detection at the MWCNT-GCE led us to select a potential value E _det = +1.20 V. The repeatability of the amperometric responses was much better than that achieved with bare GCE (RSD ranged from 7 to 12%), with RSD values for i _p of around 3%, thus demonstrating the antifouling capability of MWCNT modified electrodes. An HPLC method with amperometric electrochemical detection (ED) at the MWCNT-GCE was developed for tetracycline, oxytetracycline (OTC), chlortetracycline and doxycycline (DC). A mobile phase consisting of 18:82 acetonitrile/0.05 mol L⁻¹ phosphate buffer of pH 2.5 was selected. The limits of detection ranged from 0.09 μmol L⁻¹ for OTC to 0.44 μmol L⁻¹ for DC. The possibility to carry out multiresidue analysis is demonstrated. The HPLC-ED/MWCNT-GCE method was applied to the analysis of fish farm pool water and underground well water samples spiked with the four TCs at 2.0 × 10⁻⁷ mol L⁻¹. Solid-phase extraction was accomplished for the preconcentration of the analytes and clean-up of the samples. Recoveries ranged from 87 ± 6 to 99 ± 3%. Under preconcentration conditions, limits of detection in the water samples were between 0.50 and 3.10 ng mL⁻¹.     

Development and validation of an HPLC method for the simultaneous determination of clozapine and desmethylclozapine in plasma of schizophrenic patients

Summary A high-performance liquid chromatographic method with amperometric detection has been developed for the determination of levels of clozapine (CLZ) and its active metabolite N-desmethylclozapine (DMC) in human plasma. The analysis was performed on a 5 μm C8 reversed phase column (150×4.6 mm i.d.), with acetonitrile-phosphate buffer (pH 3.5), as the mobile phase. The detection voltage was +800 mV and the cell and column temperature were 50°C. Linear responses were obtained between 2 ng mL⁻¹ and 100 ng mL⁻¹. Absolute recovery for both clozapine and desmethylclozapine exceeded 88% and the detection limit was 1 ng mL⁻¹. Repeatability, intermediate precision and accuracy were satisfactory. The method, which is rapid, sensitive and selective, has been applied to therapeutic drug monitoring in schizophrenic patients following administration of Leponex^? tablets. In 21 patients in steady state at a mean daily clozapine dosage of 358 mg (ranging from 150 to 500 mg day⁻¹), clozapine levels averaged 379 ng mL⁻¹ (ranging from 102 to 818 ng mL⁻¹) and DMC levels averaged 233 ng mL⁻¹ (ranging from 70 to 540 ng mL⁻¹). The method requires only a very small amount of plasma (100 μL), and thus it is suitable for pharmacokinetic studies, as well as for therapeutic drug monitoring.     

A Simple Method to Measure Plasma Levels of Propafenone with Fluorescence Detection

The aim of the present study was to develop a simple method to measure plasma levels of propafenone by liquid chromatography with a C18 reverse-phase column and fluorescence detection, without previous derivatization of the sample. Linearity was assessed in the range from 50 to 1000 ng mL⁻¹ and had a correlation coefficient of 0.999. The inter- and intra-day coefficients of variation were below 5%. The limits of detection and quantification were 15 ng mL⁻¹ and 50 ng mL⁻¹, respectively. Drug levels were determined satisfactorily in two patients. A simple and reliable method was developed, especially useful in children with heart failure under treatment with propafenone.     

A sensitive semi-micro column HPLC method with peroxyoxalate chemiluminescence detection and column switching for determination of MDMA-related compounds in hair

A sensitive semi-micro column HPLC method with peroxyoxalate chemiluminescence (POCL) detection and column switching has been developed for simultaneous determination of 3,4-methylenedioxymethamphetamine (MDMA) and related compounds, for example 3,4-methylenedioxyamphetamine, methamphetamine, and amphetamine, in hair. After digestion of the hair with 1 mol L⁻¹ sodium hydroxide the compounds were extracted with n-heptane and derivatized with 4-(N,N-dimethylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole. A mixture of hydrogen peroxide and bis(2,4,5-trichloro-6-carbopentoxyphenyl)oxalate in acetonitrile was used as post-column CL reagent. Calibration plots showed linearity was good (r = 0.999); detection limits were 0.02–0.16 ng mg⁻¹ hair at a signal-to-noise ratio of 3. The precision of the method, as RSD (n = 5), in intra-day and inter-day assays was better than 5.0 and 6.9%, respectively. The proposed method was sufficiently sensitive to detect low ng mg⁻¹ levels of MDMA and related compounds in hair, and could be used for quantification of the compounds in hair samples from patients treated in a chemical dependency unit.     

Lectin-modified piezoelectric biosensors for bacteria recognition and quantification

The use of lectins for microorganism biosensors fabrication is proposed. Lectins are immobilised onto a gold-plated quartz crystal for direct piezoelectric label-free transduction of the bacteria–lectin binding event using an electrochemical quartz crystal microbalance (EQCM). Concanavalin A (Con A) and Escherichia coli were used for the evaluation of the lectin immobilisation method and the biosensor performance. Adsorption on nonpolarised and polarised (−0.200 V) gold-coated quartz crystals and immobilisation through avidin–biotin binding were checked for Con A surface attachment. Lectin–bacteria binding was evaluated in all cases. With a crystal modified with Con A via avidin–biotin immobilisation we obtained a linear calibration plot between 5.0 × 10⁶ and 2.0 × 10⁷ cfu mL⁻¹ by measuring frequency changes with E. coli concentration 1 h after bacteria addition. A remarkable increase in sensitivity was achieved when the analytical solution contained free biotinylated Con A, as a consequence of multiple lectin adhesion to Escherichia coli cell wall, which produced an accumulation of Con A–E. coli conjugates in the form of multilayers at the electrode surface. A detection limit of approximately 1.0 × 10⁴ cfu mL⁻¹ was achieved. Moreover nonspecific adsorptions were minimised. Using Con A and lectin from Arachis hypogaea, different response profiles were achieved for Escherichia coli, Staphylococcus aureus and Mycobacterium phlei, thus demonstrating the feasibility of bacteria discrimination. An approach involving filtering of free and lectin-bound bacteria and introduction of a filter in the measuring cell allowed a significant frequency change to be obtained for an E. coli concentration of 1.0 × 10³ cfu mL⁻¹ in order to further increase the sensitivity and discriminate between viable and nonviable cells; an approach using electrochemical measurements of bacterial catalase activity was also checked.     

Chromatographic Analysis of Trans Resveratrol in Italian Wines: Comparisons between FL, UV and MS Detection

Resveratrol (3,5,4′-trihydroxystilbene) is a phytoalexin that belongs to the group of stilbenes, known to occur in grapes and consequently in grape products. Its presence in wine is an important qualitative parameter because of the several beneficial effects on human health. The aim of this work is the development of a high-performance liquid chromatographic (HPLC) method for the determination of trans resveratrol in wines, and comparisons between the results obtained by different detection techniques: UV-vis spectroscopy, fluorescence spectroscopy and mass spectrometry. Resveratrol is analysed on a C-18 column using gradient elution. The method permits direct injection of sample, revealing to be time-saving, overcoming the need of sample pre-treatment steps. Detection limits were 154.8 ng mL⁻¹ by HPLC-UV, 118.0 ng mL⁻¹ by HPLC-FL and 48.0 ng mL⁻¹ by HPLC-MS. Trans resveratrol has been then quantified in a group of 52 wines derived from different Italian regions, cultivars and winemaking technologies by HPLC-UV.