Silica aerogel–poly(ethylene‐co‐vinyl acetate) composite for transparent heat retention films

Poly(ethylene‐co‐vinyl acetate) (EVA) plastic films are widely used for solar coverings including photovoltaic modules and commercial greenhouse films, but are poor at controlling heat flow. In this work, silica aerogel (SA) nanogels were examined for preparing transparent heat retention EVA films that block far infrared spectra radiation to maintain heat, without compromising the optical performance of the films. SA nanogels were melt‐mixed using a mini twin‐screw extruder with EVA pellets to form SA/EVA composite, which were pressed into thin films with controlled thickness. The composite films were characterized in terms of optical properties using a variety of analytical methods including FTIR, UV–Vis spectroscopy, electron, confocal, and atomic force microscopy. Both thermicity and thermal conductivity of commercial and experimental SA/EVA films were measured. The results demonstrated that the SA/EVA films gave improved infrared retention compared to commercial thermal plastic films without compromising visible light transmission, showing the potential for this approach in next generation heat retention films. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 927–935     

Dynamic mechanical behavior of acrylonitrile butadiene rubber/poly(ethylene‐co‐vinyl acetate) blends

The dynamic mechanical behavior of uncrosslinked (thermoplastic) and crosslinked (thermosetting) acrylonitrile butadiene rubber/poly(ethylene‐co‐vinyl acetate) (NBR/EVA) blends was studied with reference to the effect of blend ratio, crosslinking systems, frequency, and temperature. Different crosslinked systems were prepared using peroxide (DCP), sulfur, and mixed crosslink systems. The glass‐transition behavior of the blends was affected by the blend ratio, the nature of crosslinking, and frequency. sThe damping properties of the blends increased with NBR content. The variations in tan δ_max were in accordance with morphology changes in the blends. From tan δ values of peroxide‐cured NBR, EVA, and blends the crosslinking effect of DCP was more predominant in NBR. The morphology of the uncrosslinked blends was examined using scanning electron and optical microscopes. Cocontinuous morphology was observed between 40 and 60 wt % of NBR. The particle size distribution curve of the blends was also drawn. The Arrhenius relationship was used to calculate the activation energy for the glass transition of the blends, and it decreased with an increase in the NBR content. Various theoretical models were used to predict the modulus of the blends. From wide‐angle X‐ray scattering studies, the degree of crystallinity of the blends decreased with an increasing NBR content. The thermal behavior of the uncrosslinked and crosslinked systems of NBR/EVA blends was analyzed using a differential scanning calorimeter. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1556–1570, 2002     

Influence of mechanical properties,toughness, and barrier properties of PMMA‐EVA‐organoclay nanocomposites with and without in situ crosslinking

Poly methyl methacrylate (PMMA)‐ethylene vinyl acetate (EVA)‐organoclay nanocomposites were prepared with and without in situ crosslinking using tetrapropoxysilane (TPOS) as a crosslinking agent and dibutyl tin oxide (DBTO) as a catalyst. Brabender Plasticorder experimental results suggest that in situ crosslinking transforms the EVA from a liquid to a viscoelastic solid. Transmission electron micrographs analysis indicates that most of the organoclay was clustered in the crosslinked EVA phase. X‐ray diffraction and morphology indicate that the PMMA‐EVA‐organoclay nanocomposites were intercalated and incompatible. Dynamic mechanical analysis (DMA) results indicate some interaction between PMMA‐EVA‐clay nanocomposites. The in situ crosslinked of EVA and the addition of organoclay increased the modulus properties of PMMA. However, in situ crosslinking slightly reduced the barrier properties of PMMA‐EVA‐organoclay nanocomposites. Copyright © 2009 John Wiley & Sons, Ltd.     

Poling influence on the mechanical properties and molecular mobility of highly piezoelectric P(VDF‐TrFE) copolymer

The calorimetric, dielectric, and mechanical responses of highly piezoelectric 70/30 P(VDF‐TrFE) displaying homogenous d₃₃ of ?19 pC N^?1 are studied. This work aims at better understanding the influence of poling on the mechanical properties of this copolymer. To explain the one decade mechanical modulus drop observed across the Curie transition, a stiffening process of the amorphous phase due to the local electric fields in the ferroelectric crystals is proposed. In poled P(VDF‐TrFE), these fields are preferentially aligned resulting in a more stable and higher modulus below the Curie transition. This hypothesis accounts for the lower dielectric signals obtained with the poled sample. Through the Curie transition, the vanishing of these local electric fields, stemming from progressive disorientation and conversion of ferroelectric crystals to paraelectric ones, releases the constraints on the amorphous phase, leading to a storage modulus drop typical of a viscoelastic transition. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 1414–1422     

Odd‐even effect during layer‐by‐layer assembly of polyelectrolytes inspired by marine mussel

Biomimetic polyelectrolyte of Dopa modified poly(acrylic acid) (PAADopa) was synthesized taking advantage of Dopa, the major unit of marine adhesive proteins. Zinc crosslinked PAADopa (PAADopa‐Zn) were formed at acidic pH for more compact structure and assembled with the positively charged polyethylenimine (PEI) to build robust polyelectrolyte multilayers at high salt concentration. Effects of pH, crosslinking degree, and salt concentration on polymer structure, film building process, and morphology were investigated, respectively. An “odd‐even” effect was observed by quartz crystal microbalance with dissipation and AFM in the presence of zinc ion, which becomes more obvious with an optimum crosslinking degree (Zn/Dopa = 2.0) under high salt concentration (0.6 M NaCl). It indicates the different swollen properties of PEI chain and PAADopa‐Zn complexes during the layer‐by‐layer building process under optimum crosslinking degree of PAADopa‐Zn at high salt concentration. Such odd‐even phenomenon of the biocompatible system is of critical importance for understanding the mechanism of layer formation and film structures. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 245–255     

Surface‐attached polymer networks through carbene intermediates generated from α‐diazo esters

We report on the generation of surface attached polymer networks through C,H insertion reactions based on carbene intermediates. To this copolymers based on N,N‐dimethyl acrylamide, which contain α‐diazo ester groups, are generated and coated onto a solid substrate covered with a self‐assembled monolayer of a silane. After deposition, films having thicknesses of approximately 120 nm are irradiated with UV light having a wavelength of 254 nm or 360 nm or heated to temperatures between 80 and 180 °C. During the light or heat‐induced activation process, carbenes are formed, which react via C—H insertion with any neighboring polymer chain and/or with the self‐assembled monolayer on the substrate, thus forming surface‐attached polymer networks. To follow the kinetics of the crosslinking process, the conditions are adjusted, so that they range between 5 and 10 min for the UV‐crosslinking and 5 to 15 min for the heat‐induced crosslinking. UV‐patterning of the surface‐attached polymer networks through chrome contact masks allows generation of microstructures in the micrometer range. We investigate the layer formation process and describe the formation of microstructured surfaces based on these surface‐attached polymer networks. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3276–3285     

Influence of the crosslink network structure on stress‐relaxation behavior: Viscoelastic modeling of the compression set experiment

A viscoelastic approach of the compression set test is addressed in this work. This test measures the ability of rubber compounds to retain elastic properties after prolonged action of compressive stresses. Elastic properties were tested by recording the normal stress under a constant deformation of 25% with a laboratory rheometer. Considering the Boltzmann superposition principle, compression set data were modeled from the relaxation of Young's modulus, described by a Maxwell spectrum plus a constant E_∞ defining the elastic properties at the long times. This approach was developed with the copolymer of ethylene and vinyl acetate (EVA) networks crosslinked by radical chemistry and by an exchange reaction between acetate groups and silane compounds as crosslinking agents. Regarding the recovery of the elastic properties, radical chemistry provided better results than the exchange reaction for the identical crosslinking density of the network. Then, the Curro–Pincus molecular approach was developed to understand the influence of the microstructure of the EVA network on the elastic properties. The difference of the elastic properties between the two networks crosslinked by two different chemistry means was accounted for by considering the probability of having a dangling end of n units for a random crosslinking process. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1779–1790, 2003     

Effect of the liquid–liquid phase separation on the crystallization behavior of a poly(ethylene‐ran‐vinyl acetate) and paraffin wax blend

The effect of liquid–liquid phase separation (LLPS) on the crystallization behavior of poly(ethylene‐ran‐vinyl acetate) with a vinyl acetate content of 9.5 wt % (EVA‐H) in the critical composition of a 35/65 (wt/wt) EVA‐H/paraffin wax blend was investigated by small‐angle light and X‐ray scattering methods and rheometry. This blend exhibited an upper critical solution temperature (UCST) of 98°C, and an LLPS was observed between the UCST and the melting point of 88°C for the EVA‐H in the blend. As the duration time in the LLPS region increased before crystallization at 65°C, both the spherulite size and the crystallization rate of the EVA‐H increased, but the degree of the lamellar ordering in the spherulite and the degree of crystallinity of the EVA‐H in the blend decreased. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 707–715, 2000     

Grignard condensation routes to 1,3‐disilacyclobutane‐containing cyclolinear polycarbosilanes

Alkylene‐ and arylene‐bridged cyclolinear polycarbosilanes (CLPCS) with 1,3‐disilacyclobutane (DSCB) rings incorporated in the main chain of the polymer were prepared by polycondensation between corresponding di‐functional DSCB derivatives and di‐Grignard reagents. Well‐defined, low molecular weight (M_n = 3–5K; DP = 17–26), hexylene‐ and phenylene‐bridged CLPCS polymers were obtained without appreciable ring opening of the DSCB rings. Large exothermic peaks were observed in the DSC for these CLPCSs, which indicated, along with the IR spectra, that crosslinking occurred on heating to about 250 °C via the ring opening of the embedded, alternating, DSCB rings. Moreover, PB‐CLPCS undergoes photochemically induced crosslinking on UV irradiation to form crosslinked polycarbosilane network films. The spin‐cast, cured, films of these CLPCSs exhibit relatively low dielectric constants and promising thermal and mechanical properties for applications in electronics, for example, directly UV‐photoimprinted low‐k dielectrics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1547–1557     

Utilizing thiol–ene chemistry for crosslinked nickel cation‐based anion exchange membranes

Metal cation‐based anion exchange membranes (AEMs) are a unique class of materials that have shown potential to be highly stable AEMs with competitive conductivities. Here, we expand upon previous work to report the synthesis of crosslinked nickel cation‐based AEMs formed using the thiol–ene reaction. These thiol–ene‐based samples were first characterized for their morphology, both with and without nickel cations, where the nickel‐containing membranes demonstrated a disordered scattering peak characteristic of ionic clusters. The samples were then characterized for their water uptake, chemical and mechanical stability, and conductivity. They showed a combination of high water content and extreme brittleness, which also resulted in fairly low conductivity. The brittleness resulted from large water swelling as well as the need for each nickel cation to act as a crosslinker, necessary with the current nickel‐coordination chemistry. Therefore, increasing the ion exchange capacity (IEC) for these types of AEMs, important for enhancing conductivity, also increased the crosslink density. The low conductivity and brittleness seen in this work demonstrated the need to develop non‐crosslinking metal‐complexes. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 328–339     

Toughening of poly(L‐lactide)/multiwalled carbon nanotubes nanocomposite with ethylene‐co‐vinyl acetate

Poly(L ‐lactide)/multiwalled carbon nanotubes (PLLA/MWCNTs) nanocomposite recently attracts much attention because of its excellent comprehensive properties including improved thermostability, tensile strength, and conductivity. However, the nanocomposite exhibits similar brittleness compared with unmodified PLLA. In this work, a polar elastomer, that is, ethylene‐co‐vinyl acetate (EVA), was introduced into PLLA/MWCNTs nanocomposite. The selective distribution of MWCNTs and the effects of EVA on crystalline structure of PLLA were investigated using scanning electron microscope, transmission electron microscope, differential scanning calorimetry, and wide angle X‐ray diffraction. The results show that the presence of EVA induces the change of the distribution of MWCNTs in the nanocomposites, and consequently, the cold crystallization of PLLA is prevented. With the increase of EVA content, both the ductility and the impact resistance of PLLA/FMWCNTs are improved greatly, indicating the toughening effect of EVA on PLLA/MWCNTs nanocomposite. The decreased tensile strength and modulus can be compensated through annealing treatment. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Thermosensitive and control release behavior of poly (N‐isopropylacrylamide‐co‐acrylic acid) latex particles

In this work, poly(N‐isopropylacrylamide‐co‐acrylic acid) (poly(NIPAAm‐AA)) copolymer latex particles (microgels) were synthesized by the method of soapless emulsion polymerization. Poly(NIPAAm‐AA) copolymer microgels have the property of being thermosensitive. The concentration of acrylic acid (AA) and crosslinking agent N,N′‐methylenebisacrylamide were important factors to influence the lower critical solution temperature (LCST) of poly(NIPAAm‐AA) microgels. The effects of AA and crosslinking agent on the swelling behavior of poly(NIPAAm‐AA) microgels were also studied. The poly(NIPAAm‐AA) copolymer microgels were then used as a thermosensitive drug carrier to load caffeine. The effects of concentration of AA and crosslinking agent on the control release of caffeine were investigated. How the AA content and crosslinking agent influenced the morphology and LCST of the microgels was discussed in detail. The relationship of morphology, swelling, and control release behavior of these thermosensitive microgels was established. A new scheme was proposed to interpret the control release of the microgels with different morphological structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5734–5741, 2008     

Two negative minima of the first normal stress difference in a cellulose‐based cholesteric liquid crystal: Helix uncoiling

The shear rate dependence of material functions such as shear viscosity (η) and the first normal stress difference (N₁) were given and interpreted earlier by Kiss and Porter. Their widely accepted work revealed the possibility of having a negative minimum of N₁ for polymeric liquid crystals. In this work, we disclose for the first time the evidence of two negative N₁ minima on a sheared cellulosic lyotropic system. The lower shear rate minimum is ascribed to the uncoiling of the cholesteric helix, as theoretically predicted earlier. Our findings contribute also to the understanding of the other minimum already reported in the literature and attributed to the nematic director tumbling mode. Moreover, the elastic change that the LC‐HPC sample undergoes during the helix unwinding of the cholesteric structure is also by means of oscillatory measurements. This study is a contribution for the understanding of the structure‐properties relationship linked with the complex rheological behavior of chiral nematic cellulose‐based systems and may help to improve their further processing. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 821–830     

Mechanical hysteresis,interface and filler–filler structural breakdowns in ethylene vinyl acetate organoclay composites internally lubricated via radiolytically degraded PTFE microparticles

Inclusion of two or more distinct fillers (hybrid fillers) in a matrix is envisaged to entail synergetic advantages. This study reports synthesis and property evaluation of a novel hybrid filler‐based polymer composite containing two types of fillers with distinct attributes namely mechanical reinforcement and internal lubrication. Poly(tetrafluoroethylene) micro‐particles (PTFEMP) were synthesized via radiolytic‐mechanical degradation and used as an internal lubricant for organoclay (OC) reinforced ethylene vinyl acetate (EVA) matrix. Mechanical hysteresis, nonlinear and linear small amplitude oscillatory shear rheology, morphology, small angle X‐ray scattering (SAXS), dynamic coefficient of friction (DCoF), surface wetting and thermoxidative stability of binary and ternary composites were investigated. In EVA/OC composites, PTFEMP acted as an internal lubricant and reduced DCoF in a volume fraction‐dependent fashion. OC and PTFEMP both increased the mechanical hysteresis of EVA; though the magnitude of hysteresis was much less in PTFEMP. Intriguingly, PTFEMP reduced mechanical hysteresis of EVA/OC composites that is work done during loading and unloading stress–strain cycles was considerably reduced with the inclusion of PTFEMP in EVA/OC composites. SAXS results revealed mass fractals and the presence of an interfacial layer in EVA/OC composites but not in EVA/PTFEMP composites. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 509–519     

Transport properties of crosslinked acrylonitrile butadiene rubber/poly(ethylene‐co‐vinyl acetate) blends

The diffusion and transport of organic solvents through crosslinked nitrile rubber/poly(ethylene‐co‐vinyl acetate) (NBR/EVA) blends have been studied. The diffusion of cyclohexanone through these blends was studied with special reference to blend composition, crosslinking systems, fillers, filler loading, and temperature. At room temperature the mechanism of diffusion was found to be Fickian for cyclohexanone–NBR/EVA blend systems. However, a deviation from the Fickian mode of diffusion is observed at higher temperature. The transport coefficients, namely, intrinsic diffusion coefficient (D*), sorption coefficient (S), and permeation coefficient (P) increase with the increase in NBR content. The sorption data have been used to estimate the activation energies for permeation and diffusion. The van't Hoff relationship was used to determine the thermodynamic parameters. The affine and phantom models for chemical crosslinks were used to predict the nature of crosslinks. The experimental results were compared with the theoretical predictions. The influence of penetrants transport was studied using dichloromethane, chloroform, and carbon tetrachloride. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1815–1831, 1999     

Further insight into the mechanism of poly(styrene‐co‐methyl methacrylate) microsphere formation

Polymeric microspheres have been used in a broad range of applications from chromatographic separation techniques to analysis of air flow over aerodynamic surfaces. The preparation of microspheres from many polymer families has consequently been extensively studied using a variety of synthetic approaches. Although there are a myriad of polymeric microsphere synthesis methods, free‐radical initiated emulsion polymerization is one of the most common techniques. In this work, poly(styrene‐co‐methyl methacrylate) microspheres were synthesized via surfactant‐free emulsion polymerization. The effects of co‐monomer composition and addition time on particle size distribution, particle formation, and particle morphology were investigated. Particles were characterized using dynamic light scattering and scanning electron microscopy to gain further insight into particle size and size distributions. Reaction kinetics were analyzed through consideration of characterization results. A particle formation mechanism for poly(styrene‐co‐methyl methacrylate) microspheres was proposed based on characterization results and known reaction kinetics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2249–2259     

Understanding of nanogels swelling behavior through a deep insight into their morphology

A thorough understanding of the morphology of the environmental sensitive nanogels was indispensable to obtain a deeper insight on their stimuli‐responsive behavior. Therefore, in this work the colloidal characterization and the study of the inner morphology were related by using light scattering technique and ¹H‐nuclear magnetic resonance transverse relaxation measurements combined with the Flory–Rehner theory. Different biocompatible and dual‐stimuli‐sensitive nanogel particles based on poly(2‐diethylaminoethyl) methacrylate were synthesized using three different crosslinkers: two bifunctional and one multifunctional. All the nanogels obtained had a core–shell type heterogeneous morphology, but they presented completely different swelling behaviors due to their different crosslinking points’ distribution and polymeric chains’ microstructure. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2017–2025     

Multifunctional mesoporous silica nanoparticles in poly(ethylene‐co‐vinyl acetate) for transparent heat retention films

Transparent inorganic‐polymer nanocomposite films are of tremendous current interest inemerging solar coverings including photovoltaic encapsulants and commercial greenhouse plastics, but suffer from significant radiative heat loss. This work provides a new and simple approach for controlling this heat loss by using mesoporous silica/quantum dot nanoparticles in poly(ethylene‐co‐vinyl acetate) (EVA) films. Mesoporous silica shells were grown on CdS‐ZnS quantum dot (QDs) cores using a reverse microemulsion technique, controlling the shell thickness. These mesoporous silica nanoparticles (MSNs) were then melt‐mixed with EVA pellets using a mini twin‐screw extruder and pressed into thin films of concentration variable controlled thickness. The results demonstrate that the experimental MSNs showed improved infrared and thermal wavebands retention in the EVA transparent films compared to commercial silica additives, even at lower concentrations. It was also found MSNs enhanced the quantum yield and photostability of the QDs, providing high visible light transmission and blocking of UV transmission of interest for next generation solar coatings. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 851–859     

Effect of EVM/EVA‐g‐MAH ratio on the structure and properties of nylon 1010 blends

The nylon 1010/ethylene‐vinyl acetate rubber (EVM)/maleated ethylene‐vinyl acetate copolymers (EVA‐g‐MAH) ternary blends were prepared. The effect of EVM/EVA‐g‐MAH ratio on the toughness of blends was examined. A super tough nylon 1010 blends were obtained by the incorporation of both EVM and EVA‐g‐MAH. Impact essential work of fracture (EWF) model was used to characterize the fracture behavior of the blends. The nylon/EVM/EVA‐g‐MAH (80/15/5) blend had the highest total fracture energy at a given ligament length (5 mm) and the highest dissipative energy density among all the studied blends. Scanning electron microscopy images showed the EVM and EVA‐g‐MAH existed as spherical particles in nylon 1010 matrix and their size decreased gradually with increasing EVA‐g‐MAH content. Large plastic deformation was observed on the impact fracture surface of the nylon/EVM/EVA‐g‐MAH (80/15/5) blend and related to its high impact strength. Then with increasing EVA‐g‐MAH proportion, the matrix shear yielding of nylon/EVM/EVA‐g‐MAH blends became less obvious. EVM and EVA‐g‐MAH greatly increased the apparent viscosity of nylon 1010, especially at low shear rates. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 877–887, 2009     

Terpene based sustainable methacrylate copolymer series by emulsion polymerization: Synthesis and structure‐property relationship

This work demonstrates the fabrication of terpene based sustainable methacrylate polymers by an environmentally benign emulsion polymerization method. The polymerization reaction has been found to be influenced by the side chain length of the methacrylate(s), which has been quantitatively calculated from the density functional theory. Apart from the analysis of the copolymer microstructure, various properties of the synthesized polymers have been studied and correlated with the structure of the methacrylate(s). The sub‐ambient glass transition temperature indicates rubbery nature of the synthesized copolymers. While the presence of residual unsaturations from the terpene moiety could act as an additional crosslinking site, the methacrylate group may facilitate the dispersion of polar additives. The completely new class of terpene‐based sustainable rubbery methacrylate polymers is thus envisaged as promising materials for polymer and allied industries. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2639–2649