Synthesis of long‐chain‐branched polyethylene by ethylene homopolymerization with a novel nickel(II) α‐diimine catalyst

Long‐chain‐branched polyethylene with a broad or bimodal molecular weight distribution was synthesized by ethylene homopolymerization via a novel nickel(II) α‐diimine complex of 2,3‐bis(2‐phenylphenyl)butane diimine nickel dibromide ({[2‐C₆H₄(C₆H₅)]? N?C? (CH₃)C(CH₃)?N? [2‐C₆H₄(C₆H₅)]}NiBr₂) that possessed two stereoisomers in the presence of modified methylaluminoxane. The influences of the polymerization conditions, including the temperature and Al/Ni molar ratio, on the catalytic activity, molecular weight and molecular weight distribution, degree of branching, and branch length of polyethylene, were investigated. The resultant products were confirmed by gel permeation chromatography, gas chromatography/mass spectrometry, and ¹³C NMR characterization to be composed of higher molecular weight polyethylene with only isolated long‐branched chains (longer than six carbons) or with methyl pendant groups and oligomers of linear α‐olefins. The long‐chain‐branched polyethylene was formed mainly through the copolymerization of ethylene growing chains and macromonomers of α‐olefins. The presence of methyl pendant groups in the polyethylene main chain implied a 2,1‐insertion of the macromonomers into [Ni]? H active species. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1325–1330, 2005     

α‐keto‐β‐diimine nickel‐catalyzed olefin polymerization: Effect of ortho‐aryl substituents and preparation of stereoblock copolymers

A series of α‐keto‐β‐diimine nickel complexes (Ar‐N = C(CH₃)‐C(O)‐C(CH₃)=N‐Ar)NiBr₂; Ar = 2,6‐R‐C₆H₃‐, R = Me, Et, iPr, and Ar = 2,4,6‐Me₃‐C₆H₃‐) was prepared. All corresponding ligands are unstable even under an inert atmosphere and in a freezer. Stable copper complex intermediates of ligand synthesis and ethyl substituted nickel complex were isolated and characterized by X‐ray. All nickel complexes were used for the polymerization of ethene, propylene, and hex‐1‐ene to investigate their livingness and the extent of chain‐walking. Low‐temperature propene polymerization with less bulky ortho‐substituents was less isospecific than the one with isopropyl derivative. Propene stereoblock copolymers were prepared by iPr derivative combining the polymerization at low temperature to prepare isotactic polypropylene (PP) block and at a higher temperature, supporting chain‐walking, to obtain amorphous regioirregular PP block. Alternatively, a copolymerization of propene with ethene was used for the preparation of amorphous block. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2440–2449     

Preparation of linear α‐olefins to high‐molecular weight polyethylenes using cationic α‐diimine nickel(II) complexes containing chloro‐substituted ligands

A series of α‐diimine nickel(II) complexes containing chloro‐substituted ligands, [(Ar)N?C(C₁₀H₆)C?N(Ar)]NiBr₂ ( 4a , Ar = 2,3‐C₆H₃Cl₂; 4b , Ar = 2,4‐C₆H₃Cl₂; 4c , Ar = 2,5‐C₆H₃Cl₂; 4d , Ar = 2,6‐C₆H₃Cl₂; 4e , Ar = 2,4,6‐C₆H₂Cl₃) and [(Ar)N?C(C₁₀H₆)C?N(Ar)]₂NiBr₂ ( 5a , Ar = 2,3‐C₆H₃Cl₂; 5b , Ar = 2,4‐C₆H₃Cl₂; 5c , Ar = 2,5‐C₆H₃Cl₂), have been synthesized and investigated as precatalysts for ethylene polymerization. In the presence of modified methylaluminoxane (MMAO) as a cocatalyst, these complexes are highly effective catalysts for the oligomerization or polymerization of ethylene under mild conditions. The catalyst activity and the properties of the products were strongly affected by the aryl‐substituents of the ligands used. Depending on the catalyst structure, it is possible to obtain the products ranging from linear α‐olefins to high‐molecular weight polyethylenes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1964–1974, 2006     

Effect of ligand backbone substituents of nickel α‐diimine complexes on livingness/controllability of olefin polymerization: Competition between monomer isomerization and propagation

Four α‐diimine nickel complexes [(Ar? N?C(R)? C(R)?N? Ar)NiBr₂; R?H, CH₃, cyclohexane‐1,2‐diyl, naphthalene‐1,8‐diyl, Ar?2,6‐i‐Pr₂‐C₆H₃‐) were investigated in propene and hex‐1‐ene polymerization to identify the limits of backbone substituent R size needed to provide living/controlled α‐olefins polymerization by the sufficient suppression of β–H elimination transfer. Propagation kinetics measurements, molar mass on monomer conversion dependencies and reinitiation tests were used to evaluate the livingness of hex‐1‐ene polymerization. Interestingly, living/controlled hex‐1‐ene polymerization was observed in the case of all diimine derivatives including the one bearing only hydrogen atom in backbone positions. Unexpectedly, in the case of catalysts bearing H and CH₃ backbone substituents, we observed the unusual isomerization of hex‐1‐ene into internal hexenes in parallel with its polymerization. Nevertheless, by subtracting the amount of monomer consumed in isomerization side reaction, polymerization still keeps the features of living/controlled process. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3193–3202     

Controlled ring‐opening polymerization of l‐lactide and ε‐caprolactone catalyzed by aluminum‐based Lewis pairs or Lewis acid alone

Ring‐opening polymerization of cyclic esters was studied using catalysts composed of bulky Lewis acids (LA) and Lewis bases (LB). Controlled polymerization of l ‐lactide (l ‐Lac) was proceeded by Al(C₆F₅)₃·THF in combination with trimesitylphosphine (Mes₃P) or triphenylphosphine (Ph₃P) using BnOH as an initiator to produce poly(l ‐Lac) with narrow molecular weight distribution (MWD; M_w/M_n = 1.1). Both the LA and the LB were indispensable to promote the polymerization. The molecular weights of the resulting poly(l ‐Lac)s were controlled by the feed monomer to initiator ratio. ε‐Caprolactone (CL) was rapidly polymerized by Al(C₆F₅)₃·THF with or without Mes₃P, although the resulting polymer had rather broad MWD (M_w/M_n = 1.7). The CL polymerization by Al(C₆F₅)₃·THF alone at r.t. gave poly(CL) with relatively narrow MWD (M_w/M_n = 1.2). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 297–303     

[N,N′‐Bis(2,6‐diisopropylphenyl)acenaphthene‐1,2‐diimine‐1κ2N,N′]heptacarbonyl‐1κC,2κ3C,3κ3C‐di‐μ3‐tellurido‐triiiron(II)(2 Fe—Fe)

The sterically hindered title complex, [Fe₃Te₂(C₃₆H₄₀N₂)(CO)₇], was obtained by substitution of two carbonyl groups in the [Fe₃(μ₃‐Te)₂(CO)₉] cluster by the bulky redox‐active N,N′‐bis(2,6‐diisopropylphenyl)acenaphthene‐1,2‐diimine (dpp‐BIAN) ligand. The asymmetric unit contains two molecules of the same geometry. The C=N bond lengths in dpp‐BIAN indicate a rather low level of electron transfer from the cluster core to the dpp‐BIAN ligand.     

Judiciously balancing steric and electronic influences on 2,3‐diiminobutane‐based Pd(II) complexes in nourishing polyethylene properties

A new series of palladium complexes ( Pd1–Pd5 ) ligated by symmetrical 2,3‐diiminobutane derivatives, 2,3‐bis[2,6‐bis{bis(4‐FC₆H₄)₂CH}₂‐4‐(alkyl)C₆H₂N]C₄H₆ (alkyl = Me L1 , Et L2 , ⁱ Pr L3 , ^t Bu L4 ) and 2,3‐bis[2,6‐bis{bis(C₆H₅)₂CH}₂‐4‐{(CH₃)₃C}C₆H₂N]C₄H₆ L5 , have been prepared and well characterized, and their catalytic scope toward ethylene polymerization have been investigated. Upon activation with MAO, all palladium complexes ( Pd1–Pd5) exhibited good activities (up to 1.44 × 10⁶ g (PE) mol^?1(Pd) h^?1) and produced higher molecular weight polyethylene in the range of 10⁵ g mol^?1 with precise molecular weight distribution (M _w/M _n = 1.37–1.77). One of the long‐standing limiting features of the Brookhart type α‐diimine Pd(II) catalysts is that they produce highly branched (ca. 100/1000 C atoms) and totally amorphous polymer. Conversely, herein Pd5 produced polymers having dramatically lower branching number (28/1000) as well as improved melting temperature up to 73.1 °C showing well‐controlled linear architecture, and very similar to polyethylene materials generated by early‐transition‐metal based catalysts. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3214–3222     

Polymerization of higher α‐olefins using a Cs‐symmetry hafnium metallocene catalyst. Kinetics of the polymerization and microstructural analysis

The C_s‐symmetry hafnium metallocene [(p‐Et₃Si)C₆H₄]₂C(2,7‐di‐tert‐BuFlu)(C₅H₄)Hf(CH₃)₂ and tetrakis(pentafluorophenyl) borate dimethylanilinium salt ([B(C₆F₅)₄]^?[Me₂NHPh]⁺) were used as the catalytic system for the polymerization of higher α‐olefins (from hexene‐1 to hexadecene‐1) in toluene at 0 °C. The evolution of the polymerization was studied regarding the variation of the molecular weight, molecular weight distribution and yield with time. The effect of the monomer structure on the polymerization kinetics was established. The role of trioctylaluminum in accelerating the polymerization was investigated. ¹³C NMR spectroscopy was used to study the microstructure of the poly(α‐olefins) by the determination of the pentad monomer sequences. The thermal properties of the polymers were obtained by differential scanning calorimetry, DSC. The results were discussed in connection with the polymer microstructure. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4314–4325, 2009     

Pendant structure governed anion sensing property for sulfonamide‐functionalized poly(phenylacetylene)s bearing various α‐amino acids

The colorimetric detection of anionic species has been studied for α‐amino acid‐conjugated poly(phenylacetylene)s, which were prepared by the polymerization of the ethyl esters of N‐(4‐ethynylphenylsulfonyl)‐L ‐alanine, L ‐isoleucine, L ‐valine, L ‐phenylalanine, L ‐aspartic acid, and L ‐glutamic acid using Rh⁺(2,5‐norbornadiene)[(η⁶‐C₆H₅)B^?(C₆H₅)₃] as the catalyst in CHCl₃. The one‐handed helical conformations of all the sulfonamide‐functionalized polymers were characterized by Cotton effects in the circular dichroism spectra. The addition of anions with a relatively high basicity, such as tetra‐n‐butylammonium acetate and fluoride, induced drastic changes in both the optical and chiroptical properties. On the other hand, anions with a relatively low basicity, such as tetra‐n‐butylammonium nitrate, azide, and bromide, had essentially no effects on the helical conformation of all the sulfonamide‐functionalized polymers. The anion signaling property of the sulfonamide‐functionalized polymers possessing α‐amino acid moieties was significantly affected by the installed residual amino acid structures. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1683–1689, 2010     

Ethylene polymerization by sterically and electronically modulated Ni(II) α‐diimine complexes

A series of highly active ethylene polymerization catalysts based on bidendate α‐diimine ligands coordinated to nickel are reported. The ligands are prepared via the condensation of bulky ortho‐substituted anilines bearing remote push–pull substituents with acenaphthenequinone, and the precatalysts are prepared via coordination of these ligands to (DME)NiBr₂ (DME = 1,2‐dimethoxyethane) to form complexes having general formula [ZN = C(An)‐C(An) = NZ]NiBr₂ [Z = (4‐NH₂‐3,5‐C₆H₂R₂)₂CH(4‐C₆H₄Y); An, acenaphthene quinone; R, Me, Et, iPr; Y = H, NO₂, OCH₃]. When activated with methylaluminoxane (MAO) or common alkyl aluminiums such as ethyl aluminium sesquichloride (EAS) all catalysts polymerize ethylene with activities exceeding 10⁷ g‐PE/ mol‐Ni h atm at 30 °C and atmospheric pressure. Among the cocatalysts used EAS records the best activity. Effects of remote substituents on ethylene polymerization activity are also investigated. The change in potential of metal center induced by remote substituents, as evidenced by cyclic voltammetric measurements, influences the polymerization activity. UV–visible spectroscopic data have specified the important role of cocatalyst in the stabilization of nickel‐based active species. A tentative interpretation based on the formation of active and dormant species has been discussed. The resulting polyethylene was characterized by high molecular weight and relatively broad molecular weight distribution, and their microstructure varied with the structure of catalyst and cocatalyst. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1066–1082, 2008     

Cycloheptyl‐fused NNO‐ligands as electronically modifiable supports for M(II) (M = Co,Fe) chloride precatalysts; probing performance in ethylene oligo‐/polymerization

The N,N,O‐cobalt(II), [2,3‐{C₄H₈C(NAr)}:5,6‐{C₄H₈C(O)}C₅HN]CoCl₂ (Ar = 2,6‐(CHPh₂)₂‐4‐MeC₆H₂ Co1 , 2,6‐(CHPh₂)₂‐4‐EtC₆H₂ Co2 , 2,6‐(CHPh₂)₂‐4‐ClC₆H₂ Co3 , 2,6‐(CHPh₂)₂‐4‐FC₆H₂ Co4 ) and N,N,O‐iron(II) complexes, [2,3‐{C₄H₈C(NAr)}:5,6‐{C₄H₈C(O)}C₅HN]FeCl₂ (Ar = 2,6‐(CHPh₂)₂‐4‐MeC₆H₂ Fe1 , 2,6‐(CHPh₂)₂‐4‐EtC₆H₂ Fe2 , 2,6‐(CHPh₂)₂‐4‐ClC₆H₂ Fe3 , 2,6‐(CHPh₂)₂‐4‐FC₆H₂ Fe4 ), each containing one sterically enhanced but electronically modifiable N‐2,6‐dibenzhydryl‐4‐R²‐phenyl group, have been prepared by a one‐pot template approach using α,α′‐dioxo‐2,3:5,6‐bis(pentamethylene)pyridine, the corresponding aniline along with the respective cobalt or iron salt in acetic acid. Distorted square pyramidal geometries are a feature of the molecular structures of Co1 – Co4 . Upon activation with MAO or MMAO, Co1 – Co4 show good activities (up to 2.2 × 10⁵ g mol^?1(Co) h^?1) affording short chain oligomers (C₄–C₃₀) with good α‐olefin selectivity. By contrast, Fe1 – Fe4 , in the presence of MMAO, displayed moderate activities (up 10.9 × 10⁴ g(PE) mol^?1(Fe) h^?1) for ethylene polymerization forming low‐molecular‐weight linear polymers (up to 13.0 kg mol^?1) incorporating saturated n‐propyl and i‐butyl chain ends. For both cobalt and iron, the precatalysts incorporating the more electron withdrawing 4‐R²‐substituents [Cl ( Co3 / Fe3 ), F ( Co4 / Fe4 )] deliver the best catalytic activities, while with cobalt, these types of substituents additionally broaden the oligomeric distribution. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3980–3989     

C‐O Bond Cleavage of Diethyl Ether and Tetrahydrofurane by [(dpp‐BIAN)AlI(Et2O)] [dpp‐BIAN = 1,2‐bis[(2,6‐di‐iso‐propylphenyl)‐imino]acenaphthene]

At elevated temperatures, the aluminum complex [(dpp‐BIAN)AlI(Et₂O)] ( 1 ) splits the C‐O bonds of diethyl ether and tetrahydrofurane yielding the dimeric alkoxides [(dpp‐BIAN)AlOEt]₂ ( 2 ) and [(dpp‐BIAN)AlO(CH₂)₄I]₂ ( 3 ), respectively. Already at ambient temperatures, a cleavage of the C‐O bond of THF is to observe in the reaction of 1 with CpNa in THF as confirmed by the formation of [(dpp‐BIAN)AlO(CH₂)₄C₅H₅]₂ ( 4a ) and [(dpp‐BIAN)Al{O(CH₂)₄C₅H₅}(THF)] ( 4b ) in a molar ratio of 1:2. The reaction of 1 with t‐BuOK affords the monomeric alkoxide [(dpp‐BIAN)AlO‐t‐Bu(Et₂O)] ( 5 ). Compounds 2 , 3 , and 4a/b were characterized by elemental analyses and IR spectra. Additionally, the structures of 2 and 3 were determined by single crystal X‐ray diffraction.     

Biodegradation of copolymers composed of optically active L‐lactide and (R)‐ or (S)‐1‐methyltrimethylene carbonate

Random copolymerizations of L ‐lactide with (R)‐, (S)‐, or rac‐1‐methyltrimethylene carbonate with bis(pentamethylcyclopentadienyl) samarium‐methyl tetrahydrofuranate [(C₅Me₅)₂SmMe(THF)] as a novel initiator provided high molecular weight polymers with low polydispersities. Biodegradation of the resulting polymers with tricine and {N‐[tris(hydroxymethyl)methyl]‐2‐aminoethane sulfonic acid (TES) buffers as well as activated sludge showed only a small weight loss, whereas the polymer with proteinase K revealed high biodegradability independent of the optical activity of 1‐methyltrimethylene carbonate. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3916–3927, 2001     

Phosphido‐diphosphine pincer group 3 complexes as efficient initiators for lactide polymerization

New Group 3 metal complexes of the type [LM(CH₂SiMe₃)₂(THF)_n] supported by tridentate phosphido‐diphosphine ligands [(o‐C₆H₄PR₂) ₂ PH; L1‐H : R = iPr; L2‐H : R = Ph] have been synthesized by reaction of L1‐H and L2‐H with [M(CH₂SiMe₃)₃(THF)₂)] (M = Y and Sc). All the new complexes [(o‐C₆H₄PR₂) ₂ PM(CH₂SiMe₃)₂(THF)_n] [M = Y, R = iPr (1), R = Ph (2); M = Sc, R = iPr (3), R = Ph (4)] were studied as initiators for the ring opening polymerization of lactide. The yttrium complexes ( 1 and 2 ) exhibited high activity and good polymerization control, shown by the linear fits in the plot of number‐averaged molecular weight (M_n) versus the percentage conversion and versus the monomer/initiator ratio and by the low polydispersity index values. Interestingly, very good molar‐mass control was observed even when L ‐Lactide was polymerized in the absence of solvent at 130 °C. A good molar‐mass control but lower activities were observed in the polymerization reaction of lactide promoted by the analogous scandium complexes 3 and 4 . © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1374–1382, 2010     

A “Mitsubishi emblem” tetrauclear aluminum complex containing two unsymmetric N2O2‐ligands and a symmetric NO3‐ligand as initiator for polymerization of rac‐lactide

A novel hydroxy‐, methoxy‐, and phenoxy‐bridge “Mitsubishi emblem” tetranuclear aluminum complex ( 1 ) is synthesized from an unsymmetric amine‐pyridine‐bis(phenol) N₂O₂‐ligand (H₂L¹) and a symmetric amine‐tris(phenol) NO₃‐ligand (H₂L²). Two same configuration chiral nitrogen atoms are formed in the tetranuclear Al complex upon coordination of the unsymmetric tertiary amine ligand to central Al. Complex 1 initiates controlled ring‐opening polymerization (ROP) of rac‐lactide and afford polylactide (PLA) with narrow molecular weight distributions (M_w/M_n = 1.05–1.19). The analysis of ¹H NMR spectra of the oligomer indicates that the methoxy group is the initiating group and the ring‐opening polymerization of lactide follows a coordination‐insertion mechanism. The Homonuclear decoupled ¹H NMR spectroscopy suggests the isotactic‐rich chains is preferentially formed in PLA. The study on kinetics of the ROP of lactide reveals the homopropagation rate is higher than the cross‐propagation rate, which is in agreement with the observed isotactic selectivity in the ROP of rac‐lactide. The stereochemistry of the polymerization was also supported by activation parameters. The introduction of unsymmetric ligand H₂L¹ has an effect on stereoslectivity of polymerization. This result may be of interest for the design of multinuclear metal complex catalysts containing functionalized ligands. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2084–2091     

Synthesis and characterization of multiblock copolymers composed of poly(5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one) outer blocks and poly(L‐lactide) inner blocks

Ethylene glycol (EG) initiated, hydroxyl‐telechelic poly(L ‐lactide) (PLLA) was employed as a macroinitiator in the presence of a stannous octoate catalyst in the ring‐opening polymerization of 5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one (MBC) with the goal of creating A–B–A‐type block copolymers having polycarbonate outer blocks and a polyester center block. Because of transesterification reactions involving the PLLA block, multiblock copolymers of the A–(B–A)_n–B–A type were actually obtained, where A is poly(5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one), B is PLLA, and n is greater than 0. ¹H and ¹³C NMR spectroscopy of the product copolymers yielded evidence of the multiblock structure and provided the lactide sequence length. For a PLLA macroinitiator with a number‐average molecular weight of 2500 g/mol, the product block copolymer had an n value of 0.8 and an average lactide sequence length (consecutive C₆H₈O₄ units uninterrupted by either an EG or MBC unit) of 6.1. For a PLLA macroinitiator with a number‐average molecular weight of 14,400 g/mol, n was 18, and the average lactide sequence length was 5.0. Additional evidence of the block copolymer architecture was revealed through the retention of PLLA crystallinity as measured by differential scanning calorimetry and wide‐angle X‐ray diffraction. Multiblock copolymers with PLLA crystallinity could be achieved only with isolated PLLA macroinitiators; sequential addition of MBC to high‐conversion L ‐lactide polymerizations resulted in excessive randomization, presumably because of residual L ‐lactide monomer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6817–6835, 2006     

Bis(β‐diketiminato) lanthanide amides: synthesis,structure and catalysis for the polymerization of l‐lactide and ε‐caprolactone

Treatment of the chlorides (L^2,6‐iPr2_Ph)₂LnCl (L^2,6‐iPr2_Ph = [(2,6‐ⁱPr₂C₆H₃)NC(Me)CHC(Me)N(C₆H₅)]^?) with 1 equiv. of NaNH(2,6‐ⁱPr₂C₆H₃) afforded the monoamides (L^2,6‐iPr2_Ph)₂LnNH(2,6‐ⁱPr₂C₆H₃) (Ln = Y ( 1 ), Yb ( 2 )) in good yields. Anhydrous LnCl₃ reacted with 2 equiv. of NaL^2,6‐iPr2_Ph in THF, followed by treatment with 1 equiv. of NaNH(2,6‐ⁱPr₂C₆H₃), giving the analogues (L^2,6‐iPr2_Ph)₂LnNH(2,6‐ⁱPr₂C₆H₃) (Ln = Sm ( 3 ), Nd ( 4 )). Two monoamido complexes stabilized by two L^2‐Me ligands, (L^2‐Me)₂LnNH(2,6‐ⁱPr₂C₆H₃) (L^2‐Me = [N(2‐MeC₆H₄)C(Me)]₂CH)^?; Ln = Y ( 5 ), Yb ( 6 )), were also synthesized by the latter route. Complexes 1 , 2 , 3 , 4 , 5 , 6 were fully characterized, including X‐ray crystal structure analyses. Complexes 1 , 2 , 3 , 4 , 5 , 6 are isostructural. The central metal in each complex is ligated by two β‐diketiminato ligands and one amido group in a distorted trigonal bipyramid. All the complexes were found to be highly active in the ring‐opening polymerization of L‐lactide (L‐LA) and ε‐caprolactone (ε‐CL) to give polymers with relatively narrow molar mass distributions. The activity depends on both the central metal and the ligand (Yb < Y < Sm ≈ Nd and L^2‐Me < L^2,6‐iPr2_Ph). Remarkably, the binary 3/benzyl alcohol (BnOH) system exhibited a striking ‘immortal’ nature and proved able to quantitatively convert 5000 equiv. of L‐LA with up to 100 equiv. of BnOH per metal initiator. All the resulting PLAs showed monomodal, narrow distributions (M_w/M_n = 1.06 ? 1.08), with molar mass (M_n) decreasing proportionally with an increasing amount of BnOH. The binary 4/BnOH system also exhibited an ‘immortal’ nature in the polymerization of ε‐CL in toluene. Copyright © 2014 John Wiley & Sons, Ltd.     

Efficient terpolymerization of ethylene and styrene with α‐olefins by aryloxo‐modified half‐titanocene‐based catalysts and cocatalyst systems

Aryloxo‐modified half‐titanocenes, Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) [Cp′ = Cp* ( 1 ), ^tBuC₅H₄ ( 2 )], catalyze terpolymerization of ethylene and styrene with α‐olefin (1‐hexene and 1‐decene) efficiently in the presence of cocatalyst, affording high‐molecular‐weight polymers with unimodal distributions (compositions). Efficient comonomer incorporations have been achieved by these catalysts. The content of each comonomer (α‐olefin, styrene, etc.) could be controlled by varying the comonomer concentration charged, and resonances ascribed to styrene and α‐olefin repeated insertion were negligible. The terpolymerization with p‐methylstyrene (p‐MS) in place of styrene also proceeded in the presence of [PhN(H)Me₂][B(C₆F₅)₄] and AlⁱBu₃ cocatalyst, and p‐MS was incorporated in an efficient matter, affording high‐molecular‐weight polymers with uniform molecular weight distributions. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2565–2574     

Synthesis of block and end‐functionalized polyesters by triflimide‐catalyzed ring‐opening polymerization of ε‐caprolactone, 1,5‐dioxepan‐2‐one,and rac‐lactide

The ring‐opening polymerization (ROP) of cyclic esters, such as ε‐caprolactone, 1,5‐dioxepan‐2‐one, and racemic lactide using the combination of 3‐phenyl‐1‐propanol as the initiator and triflimide (HNTf₂) as the catalyst at room temperature with the [monomer]₀/[initiator]₀ ratio of 50/1 was investigated. The polymerizations homogeneously proceeded to afford poly(ε‐caprolactone) (PCL), poly(1,5‐dioxepan‐2‐one) (PDXO), and polylactide (PLA) with controlled molecular weights and narrow polydispersity indices. The molecular weight determined from an ¹H NMR analysis (PCL, M_n,NMR = 5380; PDXO, M_n,NMR = 5820; PLA, M_n,NMR = 6490) showed good agreement with the calculated values. The ¹H NMR and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry analyses strongly indicated that the obtained compounds were the desired polyesters. The kinetic measurements confirmed the controlled/living nature for the HNTf₂‐catalyzed ROP of cyclic esters. A series of functional alcohols, such as propargyl alcohol, 6‐azido‐1‐hexanol, N‐(2‐hydroxyethyl)maleimide, 5‐hexen‐1‐ol, and 2‐hydroxyethyl methacrylate, successfully produced end‐functionalized polyesters. In addition, poly(ethylene glycol)‐block‐polyester, poly(δ‐valerolactone)‐block‐poly(ε‐caprolactone), and poly(ε‐caprolactone)‐block‐polylactide were synthesized using the HNTf₂‐catalyzed ROP. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2455–2463     

Crystallographic report: Bis{[diacetyl‐bis(2,6‐isopropylphenylimine)]nickel(I)(µ‐chloro)}

The first α‐diimine nickel(I) complex having a chloro bridge is reported. The centrosymmetric dinuclear structure of {[ArN?C(Me)C(Me)?NAr]NiCl}₂[Ar?2,6?C₆H₃(i‐Pr)₂] features two chelating α‐diimine ligands and two bridged chlorine atoms, so that a distorted tetrahedral N₂Cl₂ coordination geometry for nickel results. Copyright © 2004 John Wiley & Sons, Ltd.