Synthesis and some properties of binuclear ruthenocene derivatives bridged by both ethene and thiophene derivatives

Binuclear ruthenocenes bridged by ethenes and thiophene derivatives, Rc-CHCH-Z-Rc and Rc^∗-CHCH-Z-CHCH-Rc^∗ (Z = thiophene, thieno[3,2-b]thiophene, and 2,2′-bithiophene; Rc = ruthenocenyl, R^∗ = 1′,2′,3′,4′,5′-pentamethylruthenocenyl) were prepared. These complexes showed a one-step two-electron redox wave in the cyclic voltammograms, in contrast to the benzenoid-bridged dinuclear ruthenocenes. The chemical oxidation of the Rc-CHCH-Z-Rc complexes gave no stable oxidized species. The two-electron oxidized species of the Rc^∗-CHCH-Z-CHCH-Rc^∗ complexes were comparably stable and contained a fulvene-complex type structure.     

Iodo-alkynyl- and iodo-butadiynyl-ruthenium complexes

Addition of [I(py)₂]BF₄ to Ru(CCH)(dppe)Cp∗ gave the iodovinylidene [Ru(CCHI)(dppe)Cp∗]BF₄1, which could be deprotonated to Ru(CCI)(dppe)Cp∗ 2. The attempted preparation of Ru(CCCCI)(dppe)Cp∗, followed by derivatisation with tcne, gave the dienynyl Ru{CCC[C(CN)₂]CIC(CN)₂}(dppe)Cp∗ 3. The Pd(0)/Cu(I)-catalysed reaction of 3 with Ru{CCCCAu(PPh₃)}(dppe)Cp∗ afforded Ru{CCCC(CN)₂CC(CN)₂Au(PPh₃)}(dppe)Cp∗ 4 by formal replacement of I⁺ by [Au(PPh₃)]⁺. XRD structures of 1-4 are reported.     

Rh(II)-Cp-TsDPEN catalyzed aqueous asymmetric transfer hydrogenation of chromenones into saturated alcohol: CC and CO reduction in one step

As an efficient catalyst for asymmetric transfer hydrogenation reaction (ATH reaction) of α,β-unsaturated ketones, Rh-Cp^∗-TsDPEN (Cp^∗ = 1,2,3,4,5-pentamethylcyclopenta-1,3-diene, TsDPEN = N-(p-toluenesulfonyl)-1,2-diphenyl- ethylenediamine) shows high chemoselectivity on CO and CC reduction. In our method, both CO and CC bonds in a variety of chromenone derivatives were reduced efficiently in aqueous media, resulting in at least 98% ee and up to 99% yields in a convenient way without further purification. The product was a useful intermediate for deriving chiral chroman-4-amine, which was reported as an effective agent against hypotension and inflammatory pain by inhibiting human bradykinin B1 receptor.     

Ferrole-type compounds containing thiophenic or thiepinic rings in the 3,4-positions of the metallacycle

The new ferrole Fe₂(CO)₆[μ-η²,η⁴-(Fc)CC{C(H)C(R)S}CC(SiMe₃)] [R = SiMe₃ (1) and R = Fc (2)] and ruthenoles Ru₂(CO)₆[μ-η²,η⁴-(Me₃Si)CC{SC(Fc)C(H)}CC(Fc)] 3 and Ru₂(CO)₆[μ-η²,η⁴-(Me₃Si)CC(SCCFc)C(H)C(Fc)] 4, have been obtained from the reactions of M₃(CO)₁₂ (M = Fe, Ru) and FcCCSCCSiMe₃ through S-C bond activations and C-C coupling reactions. Thermolysis of Ru₂(CO)₆[μ₃-η²,η⁴,η³-(Me₃Si)CC{SC(Fc)C(SCCSiMe₃}Ru(CO)₃}CC(Fc)] alone and in the presence of HCCFc, yielded the compounds Ru₂(CO)₆[μ-η²,η⁴-(Me₃Si)CC{SC(Fc)C(SCCSiMe₃)}CC(Fc)] 5 and Ru₂(CO)₆[μ-η²,η⁴-(Me₃Si)CC{SC(Fc)C(SCCSiMe₃)C(H)C(Fc)}CC(Fc)] 6, respectively. The crystal structures of the compounds 1, 3, 4 and 6 are reported.     

Hyperpolarizability of donor-acceptor azines subject to push-pull character and steric hindrance

The push-pull character of two series of donor-acceptor azines has been quantified by ¹³C, ¹⁵N chemical shift differences of the partial C(1)N(1) and N(2)C(2) double bonds in the central linking C(1)N(1)-N(2)C(2) unit and by the quotient of the occupations of the bonding π and anti-bonding π^∗ orbitals of these bonds. Excellent correlation of the latter push-pull parameter with the corresponding bond lengths d_CN strongly recommend both the occupation quotients π^∗/π and the corresponding bond lengths as reasonable sensors for quantifying the push, pull character along the CN-NC linking unit, for the donor-acceptor quality of the two series of azines and for the molecular hyperpolarizability ß₀ of these compounds. Within this context, reasonable conclusions concerning the interplay of steric hindrance in the chromophore, push-pull character and hyperpolarizability of the azines and their application as NLO materials will be drawn.     

The first evidence for a transient stibaallene ArSbCCR2

Dechlorofluorination of ArSb(F)-C(Cl)CR₂ (CR₂ = fluorenylidene, Ar = 2,4,6-tri-tert-butylphenyl) by tert-butyllithium afforded a 3,4-bis(fluorenylidene)-1,2-distibacyclobutane. The formation of the latter probably involves the transient stibaallene ArSbCCR₂ followed by a head-to-head dimerization via two SbC double bonds. Molecular orbital calculations at the ab initio and DFT levels support the head-to-head dimerization of ArSbCCR₂ with the formation of a 1,2-distibacyclobutane.     

Protonation of manganese phosphonioallenyl complexes

The addition of phosphines to the manganese allenylidene complexes Cp(CO)₂MnCCC(Ph)R (R = H, Ph) proceeds selectively at the C_α atom to result in the α-phosphonioallenyl complexes Cp(CO)₂Mn⁻-C(⁺PR₃¹)CC(Ph)R. The protonation of the latter affords the η²-(1,2)-phosphonioallenes Cp(CO)₂Mn{η²-(1,2)-HC(⁺PR₃¹)CC(Ph)R}, rather than the phosphoniovinylcarbenes Cp(CO)₂MnC(⁺PR₃¹)-HCC(Ph)R. All complexes obtained are stereochemically rigid and do not isomerize into the η²-(2,3)-phosphonioallene isomers.     

Reactions of β-alkoxyvinyl trihalogenomethyl ketones with triethyl phosphite

The Perkow reaction of triethyl phosphite and β-alkoxyvinyl trihalogenomethyl ketones, which have common acyclic or cyclic structural fragment: -O-CC-C(O)CX₂Cl, yielded dienyl phosphates: -O-CC-C[OP(O)(OEt)₂]CX₂ where X = F or Cl, whereas γ-bromo-β-methoxy-α,β-unsaturated trifluoromethyl ketone CF₃C(O)CHC(OMe)CH₂Br gave diene CF₃C[OP(O)(OEt)₂]CH-C(OMe)CH₂.     

Further chemistry of ruthenium butatrienylidene complexes

Several complexes have been obtained from reactions carried out in early attempts to prepare the diynyl complexes Ru(CCCCR)(dppe)Cp* (R = H, SiMe₃). These have been identified crystallographically as the acyl complex Ru{CCC(O)Me}(dppe)Cp* (3), the cationic imido complex [Ru{CCC(NH₂)Me}(dppe)Cp*]PF₆ (4), the binuclear butenynylallenylidene [{Ru(dppe)Cp*}₂{μ-CCC(OMe)CHCMeCC}]PF₆ (5), and the bis(ethynyl)cyclobutenylidene [{Ru(dppe)Cp*}₂{μ-CCC₄H₂(SiMe₃)CC}]PF₆ (6). NMR studies of 5 have revealed the existence of two isomers. Plausible routes for their formation from the putative butatrienylidene intermediate [Ru(CCCCH₂)(dppe)Cp*]⁺ (A) are discussed.     

Tertiary phosphine abstraction from a platinum(II) coordination complex with SeCN: Crystal and molecular structures of SePTA and [SePTA-Me]I · CH3OH

Reacting [PtCl(PTA)₃]Cl(PTA = 1,3,5-triaza-7-phosphatricyclo[3.3.1.1^3,7]decane) with KSeCN in aqueous or MeOH medium results in the abstraction of the PTA ligands to yield SePTA. The reaction also proceeds quantitatively by direct reaction of PTA and KSeCN in water or methanol. The methylated PTA ligand, [PTA-Me]I (1-methyl-1-azonia-3,5-diaza-7-phosphatricyclo[3.3.1.1^3,7]decane iodide), reacts accordingly with KSeCN, albeit significantly slower. The crystal structure of SePTA, 1, and [SePTA-Me]I · CH₃OH, 2, revealed PSe bond distances of 2.0991(19) and 2.100(2) Å, respectively. The first order phosphorous selenium coupling constants, ¹J_P-Se (D₂O), of 722 and 788 Hz for SePTA and [SePTA-Me]I, respectively, indicates the latter is significantly less electron rich.     

Dimerisation and reactivity of HCCCCFc at ruthenium centres

In contrast to the simple diynyl complexes formed in reactions between HCCCCFc and MCl(dppe)Cp∗; (M = Fe, Ru), an analogous reaction with RuCl(PPh₃)₂Cp∗; in the presence of KPF₆ and dbu resulted in dimerisation of the diyne at the Ru centre to afford a mixture of [Ru{η¹,η²-C(CCFc)C(L)CHCCCHFc}(PPh₃)Cp∗]PF₆ (L = dbu 1, PPh₃2). Similar reactions with RuCl(PR₃)₂L gave [Ru{η¹,η²-C(CCFc)C(dbu)CHCCCHFc}(PR₃)L]PF₆ (L = Cp, R = Ph 3, m-tol 4; L = η⁵-C₉H₇, R = Ph 5). The reaction between 3 and I₂, followed by crystallization of the paramagnetic product from MeOH, afforded the dicationic [Ru{C(CCFc)C(dbu)CHC(OMe)C(OMe)CHFc}(PPh₃)Cp](I₃)₂6. The molecular structures of 2·2CH₂Cl₂ and 6.S (S = 2CH₂Cl₂, C₆H₆) were determined by single-crystal XRD studies.     

A ruthenium(II) allenylidene complex with a 4,5-diazafluorene functional group: A new building-block for organometallic molecular assemblies

The synthesis of the new ruthenium(II) allenylidene complex [ClRu(dppe)₂CCC₁₁H₆N₂][OTf] (4) (dppe = 1,2-bis(diphenylphosphino)ethane) terminated with a 4,5-diazafluorene ligand is reported. Further coordination of that metal allenylidene to ruthenium and rhenium moieties leads to the bimetallic adducts [ClRu(dppe)₂CCC₁₁H₆N₂{Ru(bpy)₂}][B(C₆F₅)₄]₃ (5a), [ClRu(dppe)₂CCC₁₁H₆N₂{Ru(^tBu-bpy)₂}][PF₆]₃ (5b) and [ClRu(dppe)₂CCC₁₁H₆N₂{Re(CO)₃Cl}][OTf] (6). Their optical and electrochemical properties show that the allenylidene moiety is an attractive molecular clip for the access to larger original redox-active homo/heteronuclear multi-component supramolecular assemblies. The X-ray crystal structure of the allenylidene metal building block is also described.     

Further reactions of some bis(vinylidene)diruthenium complexes

Whereas {Ru(dppm)Cp*}₂(μ-CCCC) (2) is the only product formed by deprotonation of [{Ru(dppm)Cp*}₂{μ(CCHCHC)}]⁺ with dbu, a mixture of 2 with Ru{CCCHCH(PPh₂)₂[RuCp*]}(dppm)Cp* (3) and {Cp*Ru(PPh₂CHCCH-)}₂ (4) is obtained with KOBu^t. A similar reaction with [{Ru(dppm)Cp*}₂{μ(CCMeCMeC)}]⁺ (5) gave Ru{CCCMeCH(PPh₂)₂[RuCp*]}(dppm)Cp* (6). X-ray structures of 4, 5 and 6 confirm the presence of the 1-ruthena-2,4-diphosphabicyclo[1.1.1]pentane moiety, which is likely formed by an intramolecular attack of the deprotonated dppm ligand on C(1) of the vinylidene ligand. Protonation of {Ru(dppe)Cp*}₂(μ-CCCC) (8-Ru) regenerates its precursor [{Ru(dppe)Cp*}₂{μ(CCHCHC)}]²⁺ (7-Ru). Ready oxidation of the bis(vinylidene) complex affords the cationic carbonyl [Ru(CO)(dppe)Cp*]PF₆ (9) (X-ray structure).     

Oxidatively induced reactions of a diimine platinum(IV) tetramethyl complex

The oxidation of the Pt(IV) tetramethyl complex [ArNCHCHNAr]PtMe₄ (Ar = 2,6-Me₂C₆H₃) has been investigated in acetonitrile and dichloromethane. Cyclic voltammetry demonstrates that the irreversible oxidation of [ArNCHCHNAr]PtMe₄ occurs at a slightly less positive oxidation potential than the irreversible oxidation of the analogous Pt(II) species [ArNCHCHNAr]PtMe₂. The product distribution arising from the oxidation depends strongly on the reaction conditions and includes cationic Pt(IV) species (acetonitrile, dichloromethane solvents) and Pt(II) species (dichloromethane only). Evidence is presented that suggests that homolytic cleavage of a weakened PtC bond in is involved in the oxidatively induced reactions.     

Nickel alkynyl and allenylidene complexes: Synthesis and properties

Copper-catalyzed reaction of [Cp(PPh₃)NiCl] with the terminal alkynes H-CC-C(O)R (R = O-Menthyl, NMe₂, Ph) yields the alkynyl complexes [Cp(PPh₃)Ni-CC-C(O)R]. Subsequent O-methylation with either [Me₃O]BF₄ or MeSO₃CF₃ affords cationic allenylidene complexes, [Cp(PPh₃)NiCCC(OMe)R]⁺X¯ (X = BF₄, SO₃CF₃). N-Alkylation of Cp(PPh₃)Ni-pyridylethynyl complexes likewise gives cationic allenylidene complexes. [Cp(PPh₃)Ni-CC-C(CH)₄N] adds BF₃ at nitrogen. Modification of the ligand sphere in these nickel allenylidene complexes is possible by replacing PPh₃ by PMe₃ in the alkynyl complex precursors. The first allenylidene(carbene)nickel cation, [Cp(SIMes)NCCC(OMe)NMe₂]⁺, is accessible by successive reaction of [Cp(SIMes)NiCl] with H-CC-C(O)NMe₂ and [Me₃O]BF₄. By the analogous sequence an allenylidene complex containing the chelating (diphenylphosphanyl)ethylcyclopentadienyl ligand can be prepared. DFT Calculations were carried out on the allenylidene complex cation [Cp(PPh₃)NiCCC(OMe)NMe₂]⁺ and on its precursor, the alkynyl complex [Cp(PPh₃)Ni-CC-C(O)NMe₂]. Based on the spectroscopic data and a X-ray structure analysis the bonding in the new nickel allenylidene complexes is best represented by several resonance forms, an alkynyl resonance form considerably contributing to the overall bond.     

N-Perfluoroalkylsulfonylimido derivatives of arenecarboxylic acid amides and their oxidative aza Hofmann rearrangement

The analogues of carboxamides in which the sp²-hybridized oxygen atom is replaced by more electron-withdrawing groups, NSO₂CF₃ and NSO₂C₄F₉, have been synthesized. The resulting N-perfluoroalkylsulfonyl arenecarboxamidines ArC(NSO₂R_f)NH₂ (R_f = CF₃, C₄F₉) undergo an oxidative Hofmann-type rearrangement to the corresponding carbodiimides ArNCNSO₂R_f under the action of (diacyloxyiodo)arenes. Rearrangement of related compounds ArC(NSO₂R)NH₂ (R = CH₃, Ph) containing fluorine-free substituents at the sulfonyl group also occurs in similar conditions. It was found that the reactivity of amidines rises with the increasing electron-withdrawing ability of the substituent R.     

Quantification of the push-pull character of azo dyes and a basis for their evaluation as potential nonlinear optical materials

The push-pull characters of a large series of donor-acceptor substituted azo dyes—71 structures in all—have been quantified by the NN double bond lengths, d_NN, the ¹⁵N NMR chemical shift differences, Δδ_15N, of the two nitrogen atoms and the quotient, π^∗/π, of the occupations of the antibonding π^∗, and bonding π orbitals of this partial NN double bond. The excellent correlation of the occupation quotients with the bond lengths strongly infers that both π^∗/π and d_NN are excellent parameters for quantifying charge alternation in the push-pull chromophore and the molecular hyperpolarizability, β₀, of these compounds. By this approach, selected compounds can be appropriately considered as viable candidates for nonlinear optical (NLO) applications.     

Thermal gas-phase reaction of perfluorobuta-1,3-diene with NO2

The reaction of NO₂ with perfluorobuta-1,3-diene, CF₂CFCFCF₂ (C₄F₆), has been studied at 312.9, 323.0, 333.4, 396.0 and 418.0 K, using a conventional static system. The products formed in the temperature range 312.9-333.4 K were CF₂CFCF(NO₂)CF₂(NO₂) (I), CF₂(NO₂)CFCFCF₂(NO₂) (II), CF₂CFCF(NO₂)C(O)F (III) and CF₂(NO₂)CFCFC(O)F (IV) and FNO. The formation of these compounds was detected performing infrared and Raman spectra. The infrared spectrum shows a band at 1785 cm⁻¹, characteristic to the terminal -CFCF₂ group and the Raman spectrum shows a band located at 1733 cm⁻¹, corresponding to -CFCF- group. It indicates, that in this temperature range, NO₂ attacks initially only one double bound of CF₂CFCFCF₂. Since the intermediate radical CF₂CFCFCF₂(NO₂) formed in this process is allylic in nature, so there is no isomerization involved in this process, but rather the allylic radical is able to add the second NO₂ either to CF₂ or CFCF₂(NO₂) end, forming the corresponding products. At 396.0 and 418.0 K different products were observed: CF₂(NO₂)CF(NO₂)C(O)F (V), NO, CF₃C(O)F, C(O)F₂ and traces of epoxide of tetrafluoroethene, showing that, at these temperatures, both double bonds are attacked by NO₂ and detachment of CF₂ group is produced. The mechanisms consistent with experimental results in the temperature range 312.9-333.4 and at 396.0 and 418 K are proposed.     

Ionic polymers and oligomers with expanded π-conjugation system derived from through-space interaction in piperazinium ring

Reactions of N-(2,4-dinitrophenyl)-4-arylpyridinium chlorides (aryl (Ar) = phenyl and 4-pyridyl) with piperazines caused the ring opening of the pyridinium ring and yielded polymers that consisted of 5-piperazinium-3-aryl-penta-2,4-dienylideneammonium chloride units [N(CH(R)CH₂)₂N⁺(Cl⁻)CHCHC(Ar)CHCH, RH, Me, and phenyl]. However, the same reactions occurring in the presence of piperidine yielded oligomers that consisted of 5-piperazinium-3-aryl-penta-2,4-dienylideneammonium chloride units having piperidine and/or piperazine rings at both ends. ¹H NMR spectra suggested that π-electrons of the penta-2,4-dienylideneammonium group of the polymers and the oligomers were delocalized. UV-vis measurements revealed that the π-conjugation system expanded along the polymer and oligomer chains due to the orbital interaction between electrons on the two nitrogen atoms of the piperazinium ring. Conversion of the piperazinium ring from the boat form to the chair form caused decrease in the π-conjugation length. The rate constants of the conversion of the oligomers depended on their chain lengths. The surface of pellets that were molded from the polymers and oligomers exhibited metallic luster. These polymers and oligomers underwent electrochemical oxidation in solution.     

From alkenylphosphane aminoallenylidene ruthenium(II) complexes to highly unsaturated ruthenaphosphabicycloheptene complexes

The alkenylaminoallenylidene complex [Ru(η⁵-C₉H₇){CCC(NEt₂)[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (2) has been prepared by the reaction of the allenylidene [Ru(η⁵-C₉H₇)(CCCPh₂){κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (1) with the ynamine MeCCNEt₂. The reaction proceeds regio- and stereoselectively, and the insertion of the ynamine takes place exclusively at the C_βC_γ bond of the unsaturated chain. The secondary allenylidene [Ru(η⁵-C₉H₇){CCC(H)[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (3) is obtained, in a one-pot synthesis, from the reaction of aminoallenylidene 2 with LiBHEt₃ and subsequent treatment with silica. Moreover, the addition of an excess of NaBH₄ to a solution of the complex 2 in THF at room temperature gives exclusively the alkynyl complex [Ru(η⁵-C₉H₇){CCCH₂[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)] (5). The heating of a solution of allenylidene derivative 3 in THF at reflux gives regio- and diastereoselectively the cyclobutylidene complex [Ru(η⁵-C₉H₇) (PPh₃)][PF₆](4) through an intramolecular cycloaddition of the CC allyl and the C_αC_β bonds in the allenylidene complex 3. The structure of complex 4 has been determined by single crystal X-ray diffraction analysis.