The oxidation state of a protein observed molecule-by-molecule.

We report the observation of the redox state of the blue copper protein azurin on the single-molecule level. The fluorescence of a small fluorophore attached to the protein is modulated by the change in absorption of the copper center via fluorescence resonance energy transfer (FRET). In our model system, the fluorescence label Cy5 was coupled to azurin from Pseudomonas aeruginosa via cysteine K27C. The Cy5 fluorescence was partially quenched by the absorption of the copper center of azurin in its oxidized state. In the reduced state, absorption is negligible, and thus no quenching occurs. We report on single-molecule measurements, both in solution by using fluorescence correlation spectroscopy (FCS) combined with fluorescence intensity distribution analysis (FIDA), and on surfaces by using wide-field fluorescence microscopy.     

Single-molecule quantum-dot fluorescence resonance energy transfer.

Colloidal semiconductor quantum dots are promising for single-molecule biological imaging due to their outstanding brightness and photostability. As a proof of concept for single-molecule fluorescence resonance energy transfer (FRET) applications, we measured FRET between a single quantum dot and a single organic fluorophore Cy5. DNA Holliday junction dynamics measured with the quantum dot/Cy5 pair are identical to those obtained with the conventional Cy3/Cy5 pair, that is, conformational changes of individual molecules can be observed by using the quantum dot as the donor.     

Cy3-Cy5 covalent heterodimers for single-molecule photoswitching

Covalent heterodimers of the Cy3 and Cy5 fluorophores have been prepared from commercially available starting materials and characterized at the single-molecule level. This system behaves as a discrete molecular photoswitch, in which photoexcitation of the Cy5 results in fluorescence emission or, with a much lower probability, causes the Cy5 to enter into a long-lived, but metastable, dark state. Photoinduced recovery of the emissive Cy5 is achieved by very low intensity excitation (5 W cm(-2)) of the Cy3 fluorophore at a shorter wavelength. A similar system consisting of proximal, but not covalently linked, Cy3 and Cy5 has found application in stochastic optical reconstruction microscopy (STORM), a single-molecule localization-based technique for super-resolution imaging that requires photoswitching. The covalent Cy3-Cy5 heterodimers described herein eliminate the need for probabilistic methods of situating the Cy3 and Cy5 in close proximity to enable photoswitching. As proof of principle, these heterodimers have been applied to super-resolution imaging of the tubular stalk structures of live Caulobacter crescentus bacterial cells.     

Combining optical trapping and single-molecule fluorescence spectroscopy: enhanced photobleaching of fluorophores

To obtain high-resolution information on position or conformation of a molecule and at the same time apply forces to it, one can combine optical trapping with single-molecule fluorescence microscopy. The technical challenge in such an experiment is to discriminate a minute fluorescence signal from the much larger background signals caused by the trap and the fluorescence excitation laser light. We show here that this is feasible even when the fluorophore is directly attached to the trapped particle, by using optimized optical filters. We found, however, that the photostability of the fluorophores we tested suffered from the presence of the additional laser light used for trapping. We found that bleaching rates increased linearly with both the intensity of the trapping laser and the intensity of the fluorescence excitation light. Photobleaching rates were unaffected by the presence or absence of oxygen, but were significantly diminished in the presence of antioxidants. Our results indicate that the enhanced photobleaching is caused by the absorption of a visible photon followed by the excited-state absorption of a near-infrared photon. The higher excited singlet states generated in this way readily form nonfluorescent dye cations. We found that different dyes suffer to a different extent from the excited-state absorption, with Cy3 being worst and tetramethylrhodamine least affected.     

Long time scale blinking kinetics of cyanine fluorophores conjugated to DNA and its effect on Förster resonance energy transfer

The blinking kinetics of individual Cy5 fluorophores conjugated to DNA are directly measured using single-molecule spectroscopy. Under deoxygenated aqueous conditions, Cy5 fluorescence exhibits spontaneous and reversible on/off fluctuations with a period lasting seconds. This blinking is observed when directly exciting Cy5 with 640 nm light and by Forster resonance energy transfer (FRET). We find that Cy5 blinking is influenced by the proximity of the donor, the structure of the donor, the presence of 514 nm excitation, and FRET. In the context of single-molecule FRET, blinking of the acceptor produces anticorrelated donor-acceptor intensity fluctuations, which can be difficult to discern from variations in the interdye distance. Slow blinking is, in particular, problematic because it overlaps with biologically relevant time scales. By employing an alternating 514640 nm laser excitation scheme, we show that the dark states can be readily resolved and discriminated from FRET distance fluctuations.     

Design and characterization of two-dye and three-dye binary fluorescent probes for mRNA detection

We report the design, synthesis, and characterization of binary oligonucleotide probes for mRNA detection. The probes were designed to avoid common problems found in standard binary probes such as direct excitation of the acceptor fluorophore and overlap between the donor and acceptor emission spectra. Two different probes were constructed that contained an array of either two or three dyes and were characterized using steady-state fluorescence spectroscopy, time-resolved fluorescence spectroscopy, and fluorescence depolarization measurements. The three-dye binary probe (BP-3d) consists of a Fam fluorophore which acts as a donor, collecting light and transferring it as energy to Tamra, which subsequently transfers energy to Cy5 when the two probes are hybridized to mRNA. This design allows the use of 488 nm excitation, which avoids the direct excitation of Cy5 and at the same time provides a good fluorescence resonance energy transfer (FRET) efficiency. The two-dye binary probe system (BP-2d) was constructed with Alexa488 and Cy5 fluorophores. Although the overlap between the fluorescence of Alexa488 and the absorption of Cy5 is relatively low, FRET still occurs due to their close physical proximity when the probes are hybridized to mRNA. This framework also decreases the direct excitation of Cy5 and reduces the fluorescence overlap between the donor and the acceptor. Picosecond time-resolved spectroscopy showed a reduction in the fluorescence lifetime of donor fluorophores after the formation of the hybrid between the probes and target mRNA. Interestingly, BP-2d in the presence of mRNA shows a slow rise in the fluorescence decay of Cy5 due to a relatively slow FRET rate, which together with the reduction in the Alexa488 lifetime provides a way to improve the signal to background ratio using time-resolved fluorescence spectra (TRES). In addition, fluorescence depolarization measurements showed complete depolarization of the acceptor dyes (Cy5) for both BP-3d (due to sequential FRET steps) and BP-2d (due to the relatively low FRET rate) in the presence of the mRNA target.     

Mechanism of Intramolecular Photostabilization in Self‐Healing Cyanine Fluorophores

Organic fluorophores, which are popular labels for microscopy applications, intrinsically suffer from transient and irreversible excursions to dark‐states. An alternative to adding photostabilizers at high concentrations to the imaging buffer relies on the direct linkage to the fluorophore. However, the working principles of this approach are not yet fully understood. In this contribution, we investigate the mechanism of intramolecular photostabilization in self‐healing cyanines, in which photodamage is automatically repaired. Experimental evidence is provided to demonstrate that a single photostabilizer, that is, the vitamin E derivative Trolox, efficiently heals the cyanine fluorophore Cy5 in the absence of any photostabilizers in solution. A plausible mechanism is that Trolox interacts with the fluorophore through intramolecular quenching of triplet‐related dark‐states, which is a mechanism that appears to be common for both triplet‐state quenchers (cyclooctatetraene) and redox‐active compounds (Trolox, ascorbic acid, methylviologen). Additionally, the influence of solution‐additives, such as cysteamine and procatechuic acid, on the self‐healing process are studied. The results suggest the potential applicability of self‐healing fluorophores in stochastic optical reconstruction microscopy (STORM) with optical super‐resolution. The presented data contributes to an improved understanding of the mechanism involved in intramolecular photostabilization and has high relevance for the future development of self‐healing fluorophores, including their applications in various research fields.     

Self-quenched Fluorophore Dimers for DNA-PAINT and STED Microscopy

Super-resolution techniques like single-molecule localisation microscopy (SMLM) and stimulated emission depletion (STED) microscopy have been extended by the use of non-covalent, weak affinity-based transient labelling systems. DNA-based hybrid systems are a prominent example among these transient labelling systems, offering excellent opportunities for multi-target fluorescence imaging. However, these techniques suffer from higher background relative to covalently bound fluorophores, originating from unbound fluorophore-labelled single-stranded oligonucleotides. Here, we introduce short-distance self-quenching in fluorophore dimers as an efficient mechanism to reduce background fluorescence signal, while at the same time increasing the photon budget in the bound state by almost 2-fold. We characterise the optical and thermodynamic properties of fluorophore-dimer single-stranded DNA, and show super-resolution imaging applications with STED and SMLM with increased spatial resolution and reduced background.     

Carbocyanine dyes as efficient reversible single-molecule optical switch

We demonstrate that commercially available unmodified carbocyanine dyes such as Cy5 (usually excited at 633 nm) can be used as efficient reversible single-molecule optical switch, whose fluorescent state after apparent photobleaching can be restored at room temperature upon irradiation at shorter wavelengths. Ensemble photobleaching and recovery experiments of Cy5 in aqueous solution irradiating first at 633 nm, then at 337, 488, or 532 nm, demonstrate that restoration of absorption and fluorescence strongly depends on efficient oxygen removal and the addition of the triplet quencher beta-mercaptoethylamine. Single-molecule fluorescence experiments show that individual immobilized Cy5 molecules can be switched optically in milliseconds by applying alternating excitation at 633 and 488 nm between a fluorescent and nonfluorescent state up to 100 times with a reliability of >90% at room temperature. Because of their intriguing performance, carbocyanine dyes volunteer as a simple alternative for ultrahigh-density optical data storage. Measurements on single donor/acceptor (tetramethylrhodamine/Cy5) labeled oligonucleotides point out that the described light-driven switching behavior imposes fundamental limitations on the use of carbocyanine dyes as energy transfer acceptors for the study of biological processes.     

A new dark quencher for use in genetic analysis

A novel, long-wavelength, non-fluorescent quencher (LQ), based on 1,4-diaminoanthraquinone, has been incorporated at the 3' and 5'-termini of oligonucleotides. The quencher has been used in Molecular beacons, efficiently quenching the long wavelength fluorophore, Cy5.     

The Contribution of Reactive Oxygen Species to the Photobleaching of Organic Fluorophores

Photoexcitation of fluorophores commonly used for biological imaging applications generates reactive oxygen species (ROS) which can cause bleaching of the fluorophore and damage to the biological system under investigation. In this study, we show that singlet oxygen contributes relatively little to Cy5 and ATTO 647N photobleaching at low concentrations in aqueous solution. We also show that Cy5 generates significantly less ROS when covalently linked to the protective agents, cyclooctatetraene (COT), nitrobenzyl alcohol (NBA) or Trolox. Such fluorophores exhibit enhanced photostability both in bulk solutions and in single‐molecule fluorescence measurements. While the fluorophores ATTO 647N and ATTO 655 showed greater photostability than Cy5 and the protective–agent‐linked Cy5 derivatives investigated here, both of ATTO 647N and ATTO 655 generated singlet oxygen and hydroxyl radicals at relatively rapid rates, suggesting that they may be substantially more phototoxic than Cy5 and its derivatives.     

Quantitative determination of the single-molecule detection regime in fluorescence fluctuation microscopy by means of photon counting histogram analysis

Fluorescence fluctuation experiments are performed in single-molecule detection regime if the fluorescence of at most one molecule is registered at a time. Although the significance of such experiments for investigations of complex nonergodic systems like those met in the biosciences has been stressed out by many scientists, the quantitative and accurate determination of the single-molecule detection regime received rather little attention. In this work we present a method based on the photon counting histogram (PCH) analysis, which enables the determination of the average number N of molecules within the observation volume, for which only the fluorescence of individual molecules is detected at a time. Thus, the accurate design of fluorescence fluctuation experiments performed in single-molecule detection regime is possible. Demonstrative fluorescence fluctuation experiments based on two-photon excitation are performed on diluted solutions of coumarin 153, in order to verify the potential of the PCH analysis in experiments on the single-molecule detection level. If the mean number N of molecules within the excitation volume is larger than 0.048, the probability to simultaneously detect the fluorescence of two or more molecules is no longer negligible, i.e., no single-molecule detection regime. If the mean number N of molecules is lower than 0.0057, the detection limit of the method is reached, i.e., the fluorescence signal cannot be distinguished from the background. Consequently, the concentration of coumarin 153 characteristic for the single-molecule detection regime lies in the range 13-110 pmol/l for the given experimental conditions. We also investigate the influence of the molecular brightness, i.e., detected photons per fluorophore molecule and sampling time, on the single-molecule detection regime.     

Intramolecular dimers: a new strategy to fluorescence quenching in dual-labeled oligonucleotide probes

Many genomics assays use profluorescent oligonucleotide probes that are covalently labeled at the 5' end with a fluorophore and at the 3' end with a quencher. It is generally accepted that quenching in such probes without a stem structure occurs through F?rster resonance energy transfer (FRET or FET) and that the fluorophore and quencher should be chosen to maximize their spectral overlap. We have studied two dual-labeled probes with two different fluorophores, the same sequence and quencher, and with no stem structure: 5'Cy3.5-beta-actin-3'BHQ1 and 5'FAM-beta-actin-3'BHQ1. Analysis of their absorption spectra, relative fluorescence quantum yields, and fluorescence lifetimes shows that static quenching occurs in both of these dual-labeled probes and that it is the dominant quenching mechanism in the Cy3.5-BHQ1 probe. Absorption spectra are consistent with the formation of an excitonic dimer, an intramolecular heterodimer between the Cy3.5 fluorophore and the BHQ1 quencher.     

Ultrasensitive measurements of microbial rhodopsin photocycles using photochromic FRET

Microbial rhodopsins are an important class of light-activated transmembrane proteins whose function is typically studied on bulk samples. Herein, we apply photochromic fluorescence resonance energy transfer to investigate the dynamics of these proteins with sensitivity approaching the single-molecule limit. The brightness of a covalently linked organic fluorophore is modulated by changes in the absorption spectrum of the endogenous retinal chromophore that occur as the molecule undergoes a light-activated photocycle. We studied the photocycles of blue-absorbing proteorhodopsin and sensory rhodopsin II (SRII). Clusters of 2-3 molecules of SRII clearly showed a light-induced photocycle. Single molecules of SRII showed a photocycle upon signal averaging over several illumination cycles.     

A stroboscopic approach for fast photoactivation-localization microscopy with Dronpa mutants

The photophysical properties and photoswitching scheme of the reversible photoswitchable green fluorescent protein-like fluorescent proteins Dronpa-2 and Dronpa-3 were investigated by means of ensemble and single-molecule fluorescence spectroscopy and compared to those of the precursor protein Dronpa. The faster response to light and the faster dark recovery of the new mutants observed in bulk also hold at the single-molecule level. Analysis of the single-molecule traces allows us to extract the efficiencies and rate constants of the pathways involved in the forward and backward switching, and we find important differences when comparing the mutants to Dronpa. We rationalize our results in terms of a higher conformational freedom of the chromophore in the protein environment provided by the beta-can. This thorough understanding of the photophysical parameters has allowed us to optimize the acquisition parameters for camera-based sub-diffraction-limit imaging with these photochromic proteins. We show that Dronpa and its mutants are useful for fast photoactivation-localization microscopy (PALM) using common wide-field microscopy equipment, as individual fluorescent proteins can be localized several times. We provide a new approach to achieve fast PALM by introducing simultaneous two-color stroboscopic illumination.     

A photoactivatable push-pull fluorophore for single-molecule imaging in live cells

We have reengineered a red-emitting dicyanomethylenedihydrofuran push-pull fluorophore so that it is dark until photoactivated with a short burst of low-intensity violet light. Photoactivation of the dark fluorogen leads to conversion of an azide to an amine, which shifts the absorption to long wavelengths. After photoactivation, the fluorophore is bright and photostable enough to be imaged on the single-molecule level in living cells. This proof-of-principle demonstration provides a new class of bright photoactivatable fluorophores, as are needed for super-resolution imaging schemes that require active control of single molecule emission.     

Metal-enhanced fluorescent probes based on silver nanoparticles and its application in IgE detection

In this paper, a novel metal plasmon coupled with an aptamer–nucleotide hybridized probe was fabricated and applied for protein detection. The specific aptamer and single-strand oligonucleotide were chemically bound to silver nanoparticles (AgNPs), and Cy5-labeled, complementary single-strand oligonucleotides were hybridized with the particle-bound oligonucleotides. The hybridized DNA duplexes were regarded as rigid rods that separated the fluorophore Cy5 and the surface of AgNPs to reduce the competitive quenching. Using a model system comprising human immunoglobulin E (IgE) as the analyte and goat antihuman IgE as immobilized capture antibody on glass slides, we demonstrate that the detection performance of the synthetic probe was superior to the aptamer-based fluorescent probes. The results showed a good linear correlation for human IgE in the range from 10 ng/ml to 6.25 μg/ml. The detection limit obtained was 1 ng/ml, which was 50 times lower than that using Cy5 oligonucleotide/aptamer hybrid duplex (Probe2) due to the metal-enhanced fluorescence effect. This new strategy opens the possibility for the preparation of high-sensitivity detection probes based on metal nanoparticles.     

Thiazole orange and Cy3: improvement of fluorescent DNA probes with use of short range electron transfer

Thiazole orange was synthetically incorporated into oligonucleotides by using the corresponding phosphoramidite as the building block for automated DNA synthesis. Due to the covalent fixation of the TO dye as a DNA base surrogate, the TO-modified oligonucleotides do not exhibit a significant increase of fluorescence upon hybridization with the counterstrand. However, if 5-nitroindole (NI) is present as a second artificial DNA base (two base pairs away from the TO dye) a fluorescence increase upon DNA hybridization can be observed. That suggests that a short-range photoinduced electron transfer causes the fluorescence quenching in the single strand. The latter result represents a concept that can be transferred to the commercially available Cy3 label. It enables the Cy3 fluorophore to display the DNA hybridization by a fluorescence increase that is normally not observed with this dye.