QM/MM study of aqueous solvation of the uranyl fluoride [UO2F4(2-)] complex

The aqueous solvation of the uranylfluoride complex [UO(2)F(4) (2-)] was studied using full quantum mechanical (QM) and hybrid QM/molecular mechanics (MM) methods. Inclusion of a complete first solvation shell was found necessary to reproduce the experimentally observed heptacoordination of uranium. An efficient and accurate computational model is proposed that consists of structure optimization of the coordinated uranium complex as QM region, followed by single-point full QM calculations to compute relative energies. This method is proven feasible for studies of large solvated actinide complexes.     

Toward a consistent treatment of polarization in model QM/MM calculations

The concept of model chemistries within hybrid QM/MM calculations has been addressed through analysis of the polarization energy determined by two distinct approaches based on (i) induced charges and (ii) induced dipoles. The quantum mechanical polarization energy for four configurations of the water dimer has been determined for a range of basis sets using Morokuma energy decomposition analysis. This benchmark value has been compared to the fully classical polarization energy determined using the induced dipole approach, and the molecular mechanics polarization energy calculated using induced charges within the MM region of hybrid QM/MM calculations. From the water dimer calculations, it is concluded that the induced charge approach is consistent with medium sized basis set calculations whereas the induced dipole approach is consistent with large basis set calculations. This result is highly relevant to the concept of QM/MM model chemistries.     

Antibiotic binding to dizinc beta-lactamase L1 from Stenotrophomonas maltophilia: SCC-DFTB/CHARMM and DFT studies

A dizinc beta-lactamase (L1 from Stenotrophomonas maltophilia) complexed with an antibiotic compound (moxalactam) has been studied using a hybrid quantum mechanical/molecular mechanical (QM/MM) approach. The QM region is described by the self-consistent charge-density functional tight binding (SCC-DFTB) model while the MM by CHARMM. The Michaelis complex, which is constructed from a recent X-ray structure of the L1 enzyme with the hydrolyzed moxalactam, is simulated by molecular dynamics. The simulation yields valuable insights into substrate-enzyme interaction, whose implications in the enzyme catalysis are discussed. Finally, the QM/MM results are compared with a high-level density functional theory study of a truncated active-site model and the agreement provides strong support for the SCC-DFTB treatment of the QM region.     

Toward accurate barriers for enzymatic reactions: QM/MM case study on p-hydroxybenzoate hydroxylase

The hydroxylation reaction catalyzed by p-hydroxybenzoate hydroxylase has been investigated by quantum mechanical/molecular mechanical (QM/MM) calculations at different levels of QM theory. The solvated enzyme was modeled (approximately 23,000 atoms in total, 49 QM atoms). The geometries of reactant and transition state were optimized for ten representative pathways using semiempirical (AM1) and density functional (B3LYP) methods as QM components. Single-point calculations at B3LYP/MM optimized geometries were performed with local correlation methods [LMP2, LCCSD(T0)] and augmented triple-zeta basis sets. A careful validation of the latter approach with regard to all computational parameters indicates convergence of the QM contribution to the computed barriers to within approximately 1 kcal mol(-1). Comparison with the available experimental data supports this assessment.     

Design-atom approach for the quantum mechanical/molecular mechanical covalent boundary: a design-carbon atom with five valence electrons

A critical issue underlying the accuracy and applicability of the combined quantum mechanical/molecular mechanical (QM/MM) methods is how to describe the QM/MM boundary across covalent bonds. Inspired by the ab initio pseudopotential theory, here we introduce a novel design atom approach for a more fundamental and transparent treatment of this QM/MM covalent boundary problem. The main idea is to replace the boundary atom of the active part with a design atom, which has a different number of valence electrons but very similar atomic properties. By modifying the Troullier-Martins scheme, which has been widely employed to construct norm-conserving pseudopotentials for density functional calculations, we have successfully developed a design-carbon atom with five valence electrons. Tests on a series of molecules yield very good structural and energetic results and indicate its transferability in describing a variety of chemical bonds, including double and triple bonds.     

The implementation of a fast and accurate QM/MM potential method in Amber

Version 9 of the Amber simulation programs includes a new semi-empirical hybrid QM/MM functionality. This includes support for implicit solvent (generalized Born) and for periodic explicit solvent simulations using a newly developed QM/MM implementation of the particle mesh Ewald (PME) method. The code provides sufficiently accurate gradients to run constant energy QM/MM MD simulations for many nanoseconds. The link atom approach used for treating the QM/MM boundary shows improved performance, and the user interface has been rewritten to bring the format into line with classical MD simulations. Support is provided for the PM3, PDDG/PM3, PM3CARB1, AM1, MNDO, and PDDG/MNDO semi-empirical Hamiltonians as well as the self-consistent charge density functional tight binding (SCC-DFTB) method. Performance has been improved to the point where using QM/MM, for a QM system of 71 atoms within an explicitly solvated protein using periodic boundaries and PME requires less than twice the cpu time of the corresponding classical simulation.     

The adaptive buffered force QM/MM method in the CP2K and AMBER software packages

The implementation and validation of the adaptive buffered force (AdBF) quantum‐mechanics/molecular‐mechanics (QM/MM) method in two popular packages, CP2K and AMBER are presented. The implementations build on the existing QM/MM functionality in each code, extending it to allow for redefinition of the QM and MM regions during the simulation and reducing QM‐MM interface errors by discarding forces near the boundary according to the buffered force‐mixing approach. New adaptive thermostats, needed by force‐mixing methods, are also implemented. Different variants of the method are benchmarked by simulating the structure of bulk water, water autoprotolysis in the presence of zinc and dimethyl‐phosphate hydrolysis using various semiempirical Hamiltonians and density functional theory as the QM model. It is shown that with suitable parameters, based on force convergence tests, the AdBF QM/MM scheme can provide an accurate approximation of the structure in the dynamical QM region matching the corresponding fully QM simulations, as well as reproducing the correct energetics in all cases. Adaptive unbuffered force‐mixing and adaptive conventional QM/MM methods also provide reasonable results for some systems, but are more likely to suffer from instabilities and inaccuracies. © 2015 The Authors. Journal of Computational Chemistry Published by Wiley Periodicals, Inc.     

Geometry optimization based on linear response free energy with quantum mechanical/molecular mechanical method: applications to Menshutkin-type and Claisen rearrangement reactions in aqueous solution

The authors present a method based on a linear response theory that allows one to optimize the geometries of quantum mechanical/molecular mechanical (QM/MM) systems on the free energy surfaces. Two different forms of linear response free energy functionals are introduced, and electronic wave functions of the QM region, as well as the responses of electrostatic and Lennard-Jones potentials between QM and MM regions, are self-consistently determined. The covariant matrix relating the QM charge distribution to the MM response is evaluated by molecular dynamics (MD) simulation of the MM system. The free energy gradients with respect to the QM atomic coordinates are also calculated using the MD trajectory results. They apply the present method to calculate the free energy profiles of Menshutkin-type reaction of NH3 with CH3Cl and Claisen rearrangement of allyl vinyl ether in aqueous solution. For the Menshutkin reaction, the free energy profile calculated with the modified linear response free energy functional is in good agreement with that by the free energy perturbation calculations. They examine the nonequilibrium solvation effect on the transmission coefficient and the kinetic isotope effect for the Claisen rearrangement.     

Geometry optimization with QM/MM,ONIOM, and other combined methods. I. Microiterations and constraints

Hybrid energy methods such as QM/MM and ONIOM, that combine different levels of theory into one calculation, have been very successful in describing large systems. Geometry optimization methods can take advantage of the partitioning of these calculations into a region treated at a quantum mechanical (QM) level of theory and the larger, remaining region treated by an inexpensive method such as molecular mechanics (MM). A series of microiterations can be employed to fully optimize the MM region for each optimization step in the QM region. Cartesian coordinates are used for the MM region and are chosen so that the internal coordinates of the QM region remain constant during the microiterations. The coordinates of the MM region are augmented to permit rigid body translation and rotation of the QM region. This is essential if any atoms in the MM region are constrained, but it also improves the efficiency of unconstrained optimizations. Because of the microiterations, special care is needed for the optimization step in the QM region so that the system remains in the same local valley during the course of the optimization. The optimization methodology with microiterations, constraints, and step-size control are illustrated by calculations on bacteriorhodopsin and other systems.     

Interactions between phosphate and water in solution: a natural bond orbital based analysis in a QM/MM framework

The natural bond orbital (NBO) and natural energy decomposition analysis (NEDA) calculations are used to analyze the interaction between mono-methyl phosphate-ester (MMP) and its solvation environment in a combined quantum mechanical/molecular mechanical (QM/MM) framework. The solute-solvent configurations are generated using a specific parametrization of the self-consistent-charge density functional tight-binding (SCC-DFTB) model for the MMP and TIP3P for water. The NBO and NEDA calculations are done with several QM/MM partitioning schemes with HF/6-31+G** as the QM level. Regardless of the size of the QM region, a notable amount of charge transfer is observed between MMP and the neighboring water molecules and the charge-transfer interactions are, in the NEDA framework, as important as the electric (electrostatic and polarization) components. This work illustrates that NBO based analyses are effective tools for probing intermolecular interactions in condensed phase systems.     

Contributions of pauli repulsions to the energetics and physical properties computed in QM/MM methods

Conventional combined quantum mechanical/molecular mechanical (QM/MM) methods lack explicit treatment of Pauli repulsions between the quantum‐mechanical and molecular‐mechanical subsystems. Instead, classical Lennard‐Jones (LJ) potentials between QM and MM nuclei are used to model electronic Pauli repulsion and long‐range London dispersion, despite the fact that the latter two are inherently of quantum nature. Use of the simple LJ potential in QM/MM methods can reproduce minimal geometries and energies of many molecular clusters reasonably well, as compared to full QM calculations. However, we show here that the LJ potential cannot correctly describe subtle details of the electron density of the QM subsystem because of the neglect of Pauli repulsions between the QM and MM subsystems. The inaccurate electron density subsequently affects the calculation of electronic and magnetic properties of the QM subsystem. To explicitly consider Pauli interactions with QM/MM methods, we propose a method to use empirical effective potentials on the MM atoms. The test case of the binding energy and magnetic properties of a water dimer shows promising results for the general application of effective potentials to mimic Pauli repulsions in QM/MM calculations. © 2013 Wiley Periodicals, Inc.     

Theoretical studies on the reactivity of molybdenum enzymes

In recent years, advances in theoretical methods and computational capabilities have made it possible to investigate reaction mechanisms in enzymes. Density functional theory (DFT) is commonly used to study reactions in model systems, while combined quantum mechanical/molecular mechanical (QM/MM) approaches allow the treatment of the complete solvated enzyme and thus provide insight into the mechanistic influence of the protein environment. This review starts with a brief overview over the available DFT and QM/MM methodology and then summarizes recent theoretical studies on biocatalysis by molybdenum-containing enzymes. It focuses on the reactions in members of the dimethylsulfoxide reductase, sulfite oxidase, and xanthine oxidase families, with special emphasis on the QM/MM studies of the latter. It concludes with a brief survey of theoretical work on some other molybdenum- and tungsten-containing enzymes.     

Flexible-boundary QM/MM calculations: II. Partial charge transfer across the QM/MM boundary that passes through a covalent bond

Recently, based on the principle of electronic chemical potential equalization and the principle of charge conservation, we proposed a flexible-boundary scheme that allows both partial charge transfer and self-consistent polarization between the quantum mechanical (QM) and molecular mechanical (MM) subsystems in QM/MM calculations; the scheme was applied to study the atomic charges in selected ion–solvent complexes. In the present contribution, we further extend the flexible-boundary treatment to handle the QM/MM boundary passing through covalent bonds. We find that the flexible-boundary redistributed charge and dipole schemes yield reasonable agreement with full-QM calculations for a number of molecular ions and amino acids with charged side chains. Using the full-QM results as reference, the mean unsigned deviations are computed to be 0.06 e for atomic partial charges of the QM atoms, 0.11 e for the amounts of charge transfer between the QM and MM subsystems, and 0.016 Å for the lengths of the covalent bonds that directly connect the QM and MM subsystems. The results indicate the importance of accounting for partial charge transfer across the QM/MM boundary when the QM subsystems are charged.     

Variational electrostatic projection (VEP) methods for efficient modeling of the macromolecular electrostatic and solvation environment in activated dynamics simulations

New methods for the calculation of electrostatic interactions between the active dynamical region and surrounding external solvated macromolecular environment in hybrid quantum mechanical/molecular mechanical (QM/MM) simulations are presented. The variational electrostatic projection (VEP) method, and related variational reverse-mapping procedure (VEP-RVM) utilize an expansion in Gaussian surface elements for representation of electrostatic interactions. The use of a discretized surface that surrounds the active dynamical region greatly reduces the number of interactions with the particles of the external environment. The methods are tested on two catalytic RNA systems: the hammerhead and the hairpin ribozymes. It is shown that with surface elements numbering from 302 to 1202 points the direct VEP and VEP-RVM methods are able to obtain relative force errors in the range of 0.5-0.05% and 0.09-0.0001%, respectively, using a 4.0 A projection buffer. These results are encouraging and provide an essential step in the development of new variational macromolecular solvent-boundary methods for QM/MM calculations of enzyme reactions.     

Computational methods for the study of enzymic reaction mechanisms III: a perturbation plus QM/MM approach for calculating relative free energies of protonation

We describe a coupling parameter, that is, perturbation, approach to effectively create and annihilate atoms in the quantum mechanical Hamiltonian within the closed shell restricted Hartree-Fock formalism. This perturbed quantum mechanical atom (PQA) method is combined with molecular mechanics (MM) methods (PQA/MM) within a molecular dynamics simulation, to model the protein environment (MM region) effects that also make a contribution to the overall free energy change. Using the semiempirical PM3 method to model the QM region, the application of this PQA/MM method is illustrated by calculation of the relative protonation free energy of the conserved OD2 (Asp27) and the N5 (dihydrofolate) proton acceptor sites in the active site of Escherichia coli dihydrofolate reductase (DHFR) with the bound nicotinamide adenine dinucleotide phosphate (NADPH) cofactor. For a number of choices for the QM region, the relative protonation free energy was calculated as the sum of contributions from the QM region and the interaction between the QM and MM regions via the thermodynamic integration (TI) method. The results demonstrate the importance of including the whole substrate molecule in the QM region, and the overall protein (MM) environment in determining the relative stabilities of protonation sites in the enzyme active site. The PQA/MM free energies obtained by TI were also compared with those estimated by a less computationally demanding nonperturbative method based on the linear response approximation (LRA). For some choices of QM region, the total free energies calculated using the LRA method were in very close agreement with the PQA/MM values. However, the QM and QM/MM component free energies were found to differ significantly between the two methods.     

On the effect of a variation of the force field, spatial boundary condition and size of the QM region in QM/MM MD simulations

During the past years, the use of combined quantum-classical, QM/MM, methods for the study of complex biomolecular processes, such as enzymatic reactions and photocycles, has increased considerably. The quality of the results obtained from QM/MM calculations is largely dependent on five aspects to be considered when setting up a molecular model: the QM Hamiltonian, the MM Hamiltonian or force field, the boundary and coupling between the QM and MM regions, the size of the QM region and the boundary condition for the MM region. In this study, we systematically investigate the influence of a variation of the molecular mechanics force field and the size of the QM region in QM/MM MD simulations on properties of the photoactive part of the blue light photoreceptor protein AppA. For comparison, we additionally performed classical MD simulations and studied the effect of a variation of the type of spatial boundary condition. The classical boundary conditions and the force field used in a QM/MM MD simulation are shown to have non-neglegible effects upon the structural and energetic properties of the protein which makes it advisable to minimize computational artifacts in QM/MM MD simulations by application of periodic boundary conditions and a thermodynamically calibrated force field. A comparison of the structural and energetic properties of MD simulations starting from two alternative, different X-ray structures for the blue light utilizing flavin protein in its dark state indicates a slight preference of the two force fields used for the so-called Anderson structure over the Jung structure.