Synthesis of (4Z)‐4‐(Arylmethylidene)‐5‐ethoxy‐1,3‐oxazolidine‐2‐thiones by the Reaction of Ethyl (2Z)‐3‐Aryl‐2‐isothiocyanatoprop‐2‐enoates with Organolithium Compounds

A convenient one‐pot method for the preparation of (4Z)‐4‐(arylmethylidene)‐5‐ethoxy‐1,3‐oxazolidine‐2‐thiones 2 and 3 from ethyl (2Z)‐3‐aryl‐2‐isothiocyanatoprop‐2‐enoates 1 , which can be easily prepared from ethyl 2‐azidoacetate and aromatic aldehydes, has been developed. Thus, these α‐isothiocyanato α,β‐unsaturated esters were treated with organolithium compounds, including lithium enolates of acetates, to provide 5‐substituted (4Z)‐4‐(arylmethylidene)‐5‐ethoxy‐1,3‐oxazolidine‐2‐thiones, 2 , and 2‐[(4Z)‐(4‐arylmethylidene)‐5‐ethoxy‐2‐thioxo‐1,3‐oxazolidin‐5‐yl]acetates, 3 .     

Synthesis and Characterization of New (Z)‐5‐((1H‐1,2,4‐Triazol‐1‐yl)methyl)‐3‐arylideneindolin‐2‐ones

Ten compounds of new (Z)‐5‐((1H‐1,24‐triazol‐1‐yl)methyl)‐3‐arylideneindolin‐2‐ones ( 5a – j ) have been synthesized by the Knoevenagel condensation of 5‐((1H‐1,2,4‐triazol‐1‐ylmethyl)indolin‐2‐one ( 3 ) with 4‐substituted aromatic aldehydes ( 4a – j ).     

An Efficient and Facile Synthesis of 5‐(Thiophene‐2‐carbonyl)‐6‐(trifluoromethyl)‐tetrahydro‐pyrimidin‐2(1H)‐one and 6‐(Thiophen‐2‐yl)‐4,5‐dihydropyrimidin‐2(1H)‐one from Same Substrates Under Different Conditions

A series of 5‐(thiophene‐2‐carbonyl)‐6‐(trifluoromethyl)‐tetrahydropyrimidin‐2(1H)‐one and 6‐(thiophen‐2‐yl)‐4,5‐dihydropyrimidin‐2(1H)‐one derivatives have been synthesized from the reactions of aromatic aldehydes, 4,4,4‐trifluoro‐1‐(thien‐2‐yl)butane‐1,3‐dione and urea under the different conditions with high yields. In this research, it was found that the p‐toluenesulfonic acid was an efficient catalyst for obtaining 5‐(thiophene‐2‐carbonyl)‐6‐(trifluoromethyl)‐tetrahydropyrimidin‐2(1H)‐one derivative. At the same time, solvent‐free and NaOH were the preferred conditions for the synthesis of 6‐(thiophen‐2‐yl)‐4,5‐dihydropyrimidin‐2(1H)‐one derivative. Moreover, because of short reaction time, excellent yields, simple setup, this research offered an efficient process for preparing these kind compounds.     

Hydrogen‐bonding patterns in enaminones: (2Z)‐1‐(4‐bromophenyl)‐2‐(pyrrolidin‐2‐ylidene)ethanone and its piperidin‐2‐ylidene and azepan‐2‐ylidene analogues

The title compounds, namely (2Z)‐1‐(4‐bromophenyl)‐2‐(pyrrolidin‐2‐ylidene)ethanone, C₁₂H₁₂BrNO, (I), (2Z)‐1‐(4‐bromophenyl)‐2‐(piperidin‐2‐ylidene)ethanone, C₁₃H₁₄BrNO, (II), and (2Z)‐2‐(azepan‐2‐ylidene)‐1‐(4‐bromophenyl)ethanone, C₁₄H₁₆BrNO, (III), are characterized by bifurcated intra‐ and intermolecular hydrogen bonding between the secondary amine and carbonyl groups. The former establishes a six‐membered hydrogen‐bonded ring, while the latter leads to the formation of centrosymmetric dimers. Weak C—H...Br interactions link the individual molecules into chains that run along the [011], [101] and [101] directions in (I)–(III), respectively. Additional weak Br...O, C—H...π and C—H...O interactions further stabilize the crystal structures.     

Annulenoide Tetrathiafulvalene:, 5,16‐Bis(1,3‐benzodithiol‐2‐yliden)‐5,16‐dihydrotetraepoxy‐ und 5,16‐Bis(1,3‐benzodithiol‐2‐yliden)‐5,16‐dihydrotetraepithio[22]annulene(2.1.2.1)

Annulenoid Tetrathiafulvalenes: 5,16‐Bis(1,3‐benzodithiol‐2‐ylidene)‐5,16‐dihydrotetraepoxy‐ and 5,16‐Bis(1,3‐benzodithiol‐2‐ylidene)‐5,16‐dihydrotetraepithio[22]annulenes(2.1.2.1) The title compounds are among the first tetrathiafulvalenes with annulene spacers, here with tetraepoxy‐[22]annulene(2.1.2.1) (see 3a ), tetraepithio[22]annulene(2.1.2.1) (see 3b ), and diepithiodiepoxy[22]annulene(2.1.2.1) (see 23 ) units. The annulenoid tetrathiafulvalenes 3a and 3b are prepared by cyclizing McMurry coupling of the 5,5′‐(1,3‐benzodithiol‐2‐ylidenemethylene)bis[furan‐ or thiophene‐2‐carbaldehydes] ( 8a or 8b , resp.) or by Wittig reaction of (1,3‐benzodithiol‐2‐yl)tributylphosphonium tetrafluoroborate ( 13b ) with tetraepoxy[22]annulene(2.1.2.1)‐1,12‐dione 20 (formation of 3a ) or diepithiodiepoxy[22]annulene(2.1.2.1)‐1,12‐dione 22 (formation of 23 ). The annulenoide tetrathiafulvalene 3a is obtained as a mixture of the isomers (E,E)‐ and (Z,Z)‐ 3a . At 130°, (Z,Z)‐ 3a rearranges quantitatively into the (E,E)‐isomer. Isomer (E,E)‐ 3a is a dynamic molecule, where the (E)‐ethene‐1,2‐diyl bridges rotate around the adjacent σ‐bonds. The tetraepithioannulene derivative 3b as well as 23 only exist in the (Z,Z)‐configuration. The oxidation of (E,E/Z,Z)‐ 3a with Br₂ yields the annulene‐bridged tetrathiafulvalene dication (E,E)‐ 3a _Ox, while with 4,5‐dichloro‐3,6‐dioxocyclohexa‐1,4‐diene‐1,2‐dicarbonitrile (DDQ) obviously only the radical cation 3a _Sem is formed, which belongs to the class of cyanine‐like violenes. The annulenoide tetrathiafulvalenes 3b and 23 , which exist only in the (Z,Z)‐configuration, obviously for steric reasons, cannot be oxidized by DDQ. Electrochemical studies are in agreement with these results.     

Exo conformers of N‐(pyridin‐2‐yl)‐ and N‐(pyridin‐3‐yl)norbornene‐5,6‐dicarboximide crystals

Two isomeric pyridine‐substituted norbornenedicarboximide derivatives, namely N‐(pyridin‐2‐yl)‐exo‐norbornene‐5,6‐dicarboximide, (I), and N‐(pyridin‐3‐yl)‐exo‐norbornene‐5,6‐dicarboximide, (II), both C₁₄H₁₂N₂O₄, have been crystallized and their structures unequivocally determined by single‐crystal X‐ray diffraction. The molecules consist of norbornene moieties fused to a dicarboximide ring substituted at the N atom by either pyridin‐2‐yl or pyridin‐3‐yl in an anti configuration with respect to the double bond, thus affording exo isomers. In both compounds, the asymmetric unit consists of two independent molecules (Z′ = 2). In compound (I), the pyridine rings of the two independent molecules adopt different conformations, i.e. syn and anti, with respect to the methylene bridge. The intermolecular contacts of (I) are dominated by C—H...O interactions. In contrast, in compound (II), the pyridine rings of both molecules have an anti conformation and the two independent molecules are linked by carbonyl–carbonyl interactions, as well as by C—H...O and C—H...N contacts.     

A New Monomer for π‐Conjugated Polymers — Synthesis and Characterization of Bis((Z)‐5‐phenyl‐2‐phenylmethylidene‐1, 3‐dithiole‐4‐yl)monosulfane

Bis((Z)‐5‐phenyl‐2‐phenylmethylidene‐1, 3‐dithiole‐4‐yl)monosulfane ( 6 ), a molecule consisting of two diphenyldithiafulvene units connected by a sulfur bridge, was synthesized by the selective lithiation of (Z)‐4‐phenyl‐2‐phenylmethylidene‐1, 3‐dithiole ( 7a ) at the endocyclic double bond and by subsequent reaction of the lithiated intermediate with bis(phenylsulfonyl)sulfane. Since this reaction sequence proceeded with retention of configuration, of three possible isomers (E, E, Z, E, and Z, Z) only the Z, Z form was obtained. On the basis of the X‐ray structure analysis and the NMR‐spectroscopic characterization of 6 supplemented by the NMR parameters of (E)‐ and (Z)‐4‐phenyl‐2‐phenylmethylidene‐1, 3‐dithiole, it was demonstrated that two characteristic ⁵J coupling constants of the proton at the exocyclic double bond indicate the configuration (Z or E) of disubstituted dithiafuvene derivatives.     

A highly efficient synthesis of (Z)‐1‐aryl‐2‐silyl‐1‐ stannylethenes and their conversion to (E)‐2‐ arylethenyl‐, (Z)‐2‐(2‐pyridyl)ethenyl‐ and allenyl‐silanes

A Pd(dba)₂–P(OEt)₃ combination allowed the silastannation of arylacetylenes, 1‐hexyne or propargyl alcohols with tributyl(trimethylsilyl)stannane to take place at room temperature, producing (Z)‐2‐silyl‐1‐stannyl‐1‐substituted ethenes in high yields. Novel silyl(stannyl)ethenes were fully characterized by ¹H‐, ¹³C‐, ²⁹Si‐ and ¹¹⁹Sn‐NMR as well as infrared and mass analyses. Treatment of a series of (Z)‐1‐aryl‐2‐silyl‐1‐stannylethenes and (Z)‐1‐(3‐pyridyl)‐2‐silyl‐1‐stannylethene with hydrochloric acid or hydroiodic acid in the presence of tetraethylammonium chloride (TEACl) or tetrabutylammonium iodide (TBAI) led to the exclusive formation of (E)‐trimethyl(2‐arylethenyl)silanes with high stereoselectivity. A similar reaction of (Z)‐1‐(2‐anisyl)‐2‐silyl‐1‐stannylethene also produced E‐type trimethyl[2‐(2‐anisyl)ethenyl]silane, while (Z)‐trimethyl [2‐(2‐pyridyl)ethenyl]silane was produced exclusively from (Z)‐1‐(2‐pyridyl)‐2‐silyl‐1‐stannylethene. Protodestannylation of (Z)‐1‐[hydroxy(phenyl)methyl]‐2‐silyl‐1‐stannylethene with trifluoroacetic acid took place via the β‐elimination of hydroxystannane, providing trimethyl(3‐phenylpropa‐1,2‐dienyl)silane quite easily. The destannylation products were also fully characterized. Copyright © 2007 John Wiley & Sons, Ltd.     

2‐(4′‐Pyridyl‐N‐oxide)‐Substituted Hemithioindigos as Photoresponsive Guests for a Super Aryl‐Extended Calix[4]pyrrole Receptor

We report the synthesis of two 2‐(4′‐pyridyl‐N‐oxide)‐substituted hemithioindigos (HTIs). We probed their photoisomerization by using UV/Vis and ¹H NMR spectroscopy techniques. Light irradiation at λ=450 nm provoked the isomerization of the HTI Z isomer to the E counterpart to a large extent (≈80 % at the photostationary state). ¹H NMR titration experiments revealed the formation of thermodynamically and kinetically stable 1:1 inclusion complexes of the (Z)‐HTI isomers with a super aryl‐extended host (association constant>10⁴ m ^?1). Photoirradiation at λ=450 nm of the inclusion complexes induced the isomerization of the bound HTI N‐oxide to afford the (E)‐HTI?calix[4]pyrrole complex. We determined accurate association constant values for the 1:1 inclusion complexes of the (Z)‐ and (E)‐HTI isomers by using isothermal titration calorimetry experiments. The results showed that the stability constants of the (E)‐HTI complexes were 2.2–2.8‐fold lower than those of the (Z)‐HTI counterparts, which explains the lack of light‐induced release of the former to the bulk solution.     

Methyl 2‐benzamido‐4‐(3,4‐dimethoxyphenyl)‐5‐methylbenzoate and N‐{5‐benzoyl‐2‐[(Z)‐2‐methoxyethenyl]‐4‐methylphenyl}benzamide

Methyl 2‐benzamido‐4‐(3,4‐dimethoxyphenyl)‐5‐methylbenzoate, C₂₄H₂₃NO₅, (Ia), and N‐{5‐benzoyl‐2‐[(Z)‐2‐methoxyethenyl]‐4‐methylphenyl}benzamide, C₂₄H₂₁NO₃, (IIa), were formed via a Diels–Alder reaction of appropriately substituted 2H‐pyran‐2‐ones and methyl propiolate or (Z)‐1‐methoxybut‐1‐en‐3‐yne, respectively. Each of these cycloadditions might yield two different regioisomers, but just one was obtained in each case. In (Ia), an intramolecular N—H...O hydrogen bond closes a six‐membered ring. A chain is formed due to aromatic π–π interactions, and a three‐dimensional framework structure is formed by a combination of C—H...O and C—H...π(arene) hydrogen bonds. Compound (IIa) was formed not only regioselectively but also chemoselectively, with just the triple bond reacting and the double bond remaining unchanged. Compound (IIa) crystallizes as N—H...O hydrogen‐bonded dimers stabilized by aromatic π–π interactions. Dimers of (IIa) are connected into a chain by weak C—H...π(arene) interactions.     

ZnII‐ and AuI‐Catalyzed Regioselective Hydrative Oxidations of 3‐En‐1‐ynes with Selectfluor: Realization of 1,4‐Dioxo and 1,4‐Oxohydroxy Functionalizations

Catalytic 1,4‐dioxo functionalizations of 3‐en‐1‐ynes to (Z)‐ and (E)‐2‐en‐1,4‐dicarbonyl compounds are described. This regioselective difunctionalization was achieved in one‐pot operation through initial alkyne hydration followed by in situ Selectfluor oxidation. The presence of pyridine alters the reaction chemoselectivity to give 4‐hydroxy‐2‐en‐1‐carbonyl products instead. A cooperative action of pyridine and Zn^II assists the hydrolysis of key oxonium intermediate.     

Stereoselective Synthesis of (Z)‐4‐(2‐Bromovinyl)benzene‐sulfonyl Azide and Its Synthetic Utility for the Transformation to (Z)‐N‐[4‐(2‐Bromovinyl)benzenesulfonyl]imidates

A novel method for the stereoselective synthesis of (Z)‐4‐(2‐bromovinyl)benzenesulfonyl azide by simultaneous azidation and debrominative decarboxylation of anti‐2,3‐dibromo‐3‐(4‐chlorosulfonylphenyl)propanoic acid using NaN₃ only was developed. Facile transformation of (Z)‐4‐(2‐bromovinyl)benzenesulfonyl azide to (Z)‐N‐[4‐ (2‐bromovinyl)benzenesulfonyl]imidates was also achieved by Cu‐catalyzed three‐component coulping of (Z)‐4‐(2‐bromovinyl)benzenesulfonyl azide, terminal alkynes and alcohols/phenols.     

Quinolone Analogs 13: Synthesis of Novel 1,1′‐(2‐Methylenepropane‐1,3‐diyl)di(4‐quinolone‐3‐carboxylate) and Related Compounds

The reaction of the 4‐hydroxyquinoline‐3‐carboxylate 6 with pentaerythritol tribromide gave the 1,1′‐(2‐methylenepropane‐1,3‐diyl)di(4‐quinolone‐3‐carboxylate) 11 , whose reaction with bromine afforded the 1,1′‐(2‐bromo‐2‐bromomethylpropane‐1,3‐diyl)di(4‐quinolone‐3‐carboxylate) 12 . Compound 12 was transformed into the (Z)‐1,1′‐(2‐acetoxymethylpropene‐1,3‐diyl)di(4‐quinolone‐3‐carboxylate) 13 or (E)‐1,1′‐[2‐(imidazol‐1‐ylmethyl)propene‐1,3‐diyl]di(4‐quinolone‐3‐carboxylate) 14 . Hydrolysis of the dimer (Z)‐ 13 or (E)‐ 14 with potassium hydroxide provided the (E)‐1,1′‐(2‐hydroxymethylpropene‐1,3‐diyl)di(4‐quinolone‐3‐carboxylic acid) 15 or (Z)‐1,1′‐[2‐(imidazol‐1‐ylmethyl)propene‐1,3‐diyl]di(4‐quinolone‐3‐carboxylic acid) 16 , respectively. The nuclear Overhauser effect (NOE) spectral data supported that those hydrolysis resulted in the geometrical conversion of (Z)‐ 13 into (E)‐ 15 or (E)‐ 14 into (Z)‐ 16 .     

一种经(E)-α-碘代烯基砜的钯催化交叉偶联反应立体选择合成(1Z,3E)-2-芳砜基取代的1,3-二烯的新方法

（E）-α-Stannylvinyl phenyl（or p-tolyl）sulfones underwent an iododestannylation reaction to afford （E）-α-iodovinyl phenyl（or p-tolyl）sulfones 1, which reacted with （E）-alkenylzirconium（IV） complexes 2 produced in situ by hydrozirconation of terminal alkynes in the presence of a Pd（PPh3）4 catalyst to afford stereoselectively （1Z,3E）-2- phenyl（or p-tolyl）sulfonyl-substituted 1,3-dienes 3 in good yields.     

Reactivity of N,N″‐1,ω‐alkanediyl‐bis‐[N′‐organylthiourea] Derivatives Towards Isatylidene Malononitrile

(Z)‐2‐(2‐Oxoindolin‐3‐ylidene)‐2‐(substituted amino)acetonitriles, 2‐thioxoimidazolidine‐1‐carbothioamides, and 2‐thioxotetrahydropyrimidine‐1(2H)‐carbothioamides were synthesized via conventional thermal or microwave‐assisted reaction of isatylidene malononitrile with N,N″‐1,ω‐alkanediyl‐bis‐[N′‐organylthiourea] derivatives. Rationale for these conversations involving the nucleophilic addition on the dicyanomethylene carbon atom and intramolecular heterocyclization of the title compounds is presented. The structure of the (Z)‐2‐(2‐oxoindolin‐3‐ylidene)‐2‐(phenylamino)acetonitrile has been confirmed by the X‐ray analysis.     

Hydrogen‐Bonding in Cyclic 2‐(3‐Oxo‐3‐phenylpropyl)‐Substituted 1,3‐Diketones: 17O‐NMR Spectra and X‐Ray Structure Determination

Structures of cyclic 2‐(3‐oxo‐3‐phenylpropyl)‐substituted 1,3‐diketones 4a – c were determined by ¹⁷O‐NMR spectroscopy and X‐ray crystallography. In CDCl₃ solution, compounds 4a – c form an eight‐membered‐ring with intramolecular H‐bonding between the enolic OH and the carbonyl O(11)‐atom of the phenylpropyl group, as demonstrated by increased shielding of specifically labeled 4a – c in the ¹⁷O‐NMR spectra (Δδ(¹⁷O(11))=36 ppm). In solid state, intermolecular H‐bonding was observed instead of intramolecular H‐bonding, as evidenced by the X‐ray crystal‐structure analysis of compound 4b . Crystals of compound 4b at 293 K are monoclinic with a=11.7927 (12) Å, b=13.6230 (14) Å, c=9.8900 (10) Å, β=107.192 (2)°, and the space group is P2₁/c with Z=4 (refinement to R=0.0557 on 2154 independent reflections).     

Synthesis of 4‐Arylisocoumarins (=4‐Aryl‐1H‐2‐benzopyran‐1‐ones) through Acidic Hydrolysis of (Z)‐2‐(1‐Aryl‐2‐methoxyethenyl)benzaldehydes,Followed by Oxidation

4‐Arylisocoumarins (=4‐aryl‐1H‐2‐benzopyran‐1‐ones) 6 were prepared from 2‐(1‐aryl‐2‐methoxyethenyl)‐1‐bromobenzenes 1 . Successive treatment of these bromo styrenes with BuLi and 1‐formylpiperidine gave a mixture of (E)‐ and (Z)‐2‐(1‐aryl‐2‐methoxyethenyl)benzaldehydes 2 . Hydrolysis of (Z)‐isomers with conc. HBr, followed by pyridinium chlorochromate (PCC) oxidation of the resulting 1H‐2‐benzopyran‐1‐ol derivatives 4 (and 5 ), afforded the desired products.     

(E/Z)‐Isomerization of (all‐E)‐5,6‐Diepikarpoxanthin

(all‐E)‐5,6‐Diepikarpoxanthin (=(all‐E,3S,5S,6S,3′R)‐5,6‐dihydro‐β,β‐carotene‐3,5,6,3′‐tetrol; 1 ) was submitted to thermal isomerization and I₂‐catalyzed photoisomerization. The structures of the main products, i.e. (9Z)‐ ( 2 ), (9′Z)‐ ( 3 ), (13Z)‐ ( 4 ), (13′Z)‐ ( 5 ), and (15Z)‐5,6‐diepikarpoxanthin ( 6 ), were determined by their UV/VIS, CD, ¹H‐NMR, and mass spectra. In addition, (9Z,13′Z)‐ or (13Z,9′Z)‐ ( 7 ), (9Z,9′Z)‐ ( 8 ), and (9Z,13Z)‐ or (9′Z,13′Z)‐5,6‐diepikarpoxanthin ( 9 ) were tentatively identified as minor products of the I₂‐catalyzed photoisomerization.     

Reaction between Furan‐ or Thiophene‐2‐carbonyl Chloride,Isocyanides, and Dialkyl Acetylenedicarboxy­lates: Multicomponent Synthesis of 2,2′‐Bifurans and 2‐(Thiophen‐2‐yl)furans

An efficient multi‐component synthesis of highly functionalized 2,2′‐bifurans and 2‐(thiophen‐2‐yl)furans is described. A mixture of furan‐ or thiophene‐2‐carbonyl chloride, an isocyanide, and a dialkyl acetylenedicarboxylate undergoes a smooth addition reaction in dry CH₂Cl₂ at ambient temperature to produce 2‐amino‐5‐(4‐chlorofuran‐2‐yl)furan‐3,4‐dicarboxylates and 2‐amino‐5‐(4‐chlorothiophen‐2‐yl)furan‐3,4‐dicarboxylates. A single‐crystal X‐ray‐analysis of a derivative conclusively confirms the structure of these 2,2′‐bifurans and 2‐(thiophen‐2‐yl)furans. A novel electrophilic aromatic substitution reaction can justify the formation of the Cl‐substituted furan or thiophene rings.     

Two hydrazones derived from 1‐aryl‐3‐(p‐substituted phenyl)prop‐2‐en‐1‐one: synthesis,crystal structure,Hirshfeld surface analysis and in vitro biological properties

Two chalcones were synthesized by the aldolic condensation of enolizable aromatic ketones with substituted benzaldehydes under Claisen–Schmidt reaction conditions and then treated with 2,4‐dinitrophenylhydrazine to yield their corresponding hydrazones. The two (E,Z)‐2,4‐dinitrophenylhydrazone structures, namely (Z)‐1‐(2,4‐dinitrophenyl)‐2‐[(E)‐3‐(4‐methylphenyl)‐1‐phenylallylidene]hydrazine, C₂₂H₁₈N₄O₄, ( H1 ), and (Z)‐1‐[(E)‐3‐(4‐chlorophenyl)‐1‐(naphthalen‐1‐yl)allylidene]‐2‐(2,4‐dinitrophenyl)hydrazine, C₂₅H₁₇ClN₄O₄, ( H2 ), were isolated by recrystallization and characterized by FT–IR, UV–Vis, single‐crystal and powder X‐ray diffraction methods. The UV–Vis spectra of the hydrazones have been studied in two organic solvents of different polarity. It was found that ( H2 ) has a molar extinction coefficient larger than 40000. Single‐crystal X‐ray diffraction analysis reveals that the molecular zigzag chains of ( H1 ) and ( H2 ) are interconnected through noncovalent contacts. A quantitative analysis of the intermolecular interactions in the crystal structures has been performed using Hirshfeld surface analysis. All the synthesized chalcones and hydrazones were evaluated for their antibacterial and antioxidant activities. Results indicate that the studied compounds show significant activity against Gram negative Escherichia coli strain and the chalcone 3‐(4‐methylphenyl)‐1‐phenylprop‐2‐en‐1‐one, ( C1 ), was the most effective. In addition, only hydrazone ( H1 ) displayed a moderate DPPH (2,2‐diphenyl‐1‐picryl hydrazyl) scavenging efficiency.