Theoretical investigations of 1,4‐butanediol and 2‐butene‐1,4‐diol cyclodehydration using postprocessing visualization of quantum chemical calculation data

Cyclodehydration of 1,4‐butanediol and 2‐butene‐1,4‐diol to the corresponding cyclic ethers was studied using the AM1 semiempirical method. It was established that the cyclodehydration reaction of 1,4‐butenediol and 2‐butene‐1,4‐diol is effected by converting of semicyclic conformers in the presence of acidic and basic active centers. The calculation results indicate that a concerted mechanism is probably realized in the cyclodehydration of both diols, while the sequences of the predicted steps in the cyclodehydration reaction for 1,4‐butanediol and 2‐butene‐1,4‐diol are different. The calculated reaction heats for 1,4‐butanediol and 2‐butene‐1,4‐diol transformations are ?184.029 and ?308.746 kcal/mol, respectively. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Synthesis of 5,6‐dihydro‐2‐trifluoromethyl‐1,4‐dioxin‐3‐carboxanilides through polymer‐bound activated ester: Construction of dihydro‐1,4‐dioxin

A new construction of dihydro‐1,4‐dioxin and a synthesis of 5,6‐dihydro‐2‐trifluoromethyl‐1,4‐dioxin‐3‐carboxanilides 22 through polymer‐bound activated ester are described. An intermediate β‐hydroxy ether 18 was prepared from the substitution reaction of α‐thio‐α‐chloro compound 8 with ethylene glycol followed by treatment with Raney Ni. Replacement of hydroxy by chlorine and then dehydrochlorination afforded trifluoromethyl dihydro‐1,4‐dioxin ester 15. The polymer‐bound trifluoromethyl dihydro‐1,4‐dioxin‐3‐carboxylic acid, 4‐hydroxy‐3‐nitrobenzophenone ester ( 21 ) was prepared through the reaction of polystyrene‐bound 4‐hydroxy‐3‐nitrobenzophenone ( 19 ) with the trifluoromethyl dihydro‐1,4‐dioxin‐3‐carbonyl chloride ( 20 ). Refluxing of 21 with substituted aniline in acetonitrile gave the corresponding carboxanilide 22. The reaction rate depended on the nucleophilicity of nitrogen of the aniline.     

Poly(1,4‐cyclohexylenedimethylene 1,4‐cyclohexanedicarboxylate): Influence of stereochemistry of 1,4‐cyclohexylene units on the thermal properties

A series of poly(1,4‐cyclohexylenedimethylene 1,4‐cyclohexanedicarboxylate) (PCCD) samples, characterized by different cis/trans ratio of the 1,4‐cyclohexanedicarbonyl unit, have been synthesized and analyzed by thermogravimetry (TGA), calorimetry (DSC), and X‐ray diffraction (WAXD). The thermal stability results are good and are not affected by the stereochemistry of the 1,4‐cyclohexylene units. On the other hand, the thermal transitions are notably influenced by the cis/trans content. With the increment of the trans content the polymer changes from completely amorphous to semicrystalline material. T_g, T_m, and crystallinity increase. These results suggest that the trans configuration induces a better chain packing and higher symmetry, improving the crystallizability of the samples. The effect of the molecular structure on the thermal properties is analyzed by using a statistical approach. From the effective correlations found between stereochemistry of the C₆ rings and transition temperatures it is possible to extrapolate that the configuration of 1,4‐cyclohexylene ring deriving from 1,4‐cyclohexanedicarboxylic acid or dimethyl 1,4‐cyclohexanedicarboxylate results to be the main element responsible for the thermal properties. This is due to the high rigidity of the 1,4‐cyclohexanedicarbonyl unit with respect to 1,4‐cyclohexanedimethyleneoxy unit, deriving from the diol. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 619–630, 2008     

2‐(Pyrrolidin‐1‐yl)‐1,4‐naphtho­quinone and 2‐phenyl­sulfanyl‐3‐(pyrrolidin‐1‐yl)‐1,4‐naphtho­quinone

The structure of 2‐(pyrrolidin‐1‐yl)‐1,4‐naphtho­quinone, C₁₄H_12.95Cl_0.05NO₂, (I), is actually a 0.95:0.05 mixture including 2‐chloro‐3‐(pyrrolidin‐1‐yl)‐1,4‐naphtho­quinone as a minor impurity, but (I) was resolved as a single molecule containing a Cl atom with 5% occupancy at the 3‐position. Compound (I) was prepared from the fully chloro‐substituted analogue in an attempt to produce the disubstituted pyrrolidinyl derivative. 2‐Phenyl­sulfanyl‐3‐(pyrrolidin‐1‐yl)‐1,4‐naphtho­quinone, C₂₀H₁₇NO₂S, (II), was also prepared from 2‐chloro‐3‐(pyrrolidin‐1‐yl)‐1,4‐naphtho­quinone, using a strong exocyclic nucleophile. The structure of (II) differs from previous structures of 2,3‐di­chloro‐1,4‐naphtho­quinone and its derivatives in that the naphtho­quinone ring is non‐planar.     

Synthesis and Reactions of 1,4‐Anhydrogalactopyranose and 1,4‐Anhydroarabinose – Steric and Electronic Limitations

Scope and limitations of 1,4‐anhydro sugars as precursors of glycofuranosyl building blocks are described. The experiments revealed that the choice of the substituents is very important for an efficient preparation as well as a successful ring‐opening reaction of 1,4‐anhydro sugars. DFT Calculations suggest that selective protonation of 1,4‐anhydro sugars is the key to the selective ring opening in order to afford only furanosides.     

Synthesis of a soluble conjugated cumulene polymer: poly(biphenyl‐4,4′‐diyl‐1,4‐bis(4‐dodecyloxyphenyl)‐buta‐1,2,3‐triene‐1,4‐diyl)

A conjugated polymer with a butatriene segment in the main chain, poly(biphenyl‐4,4′‐diyl‐1,4‐bis(4‐dodecyloxyphenyl)buta‐1,2,3‐triene‐1,4‐diyl), was synthesized from 1,4‐bis(4‐bromophenyl)‐1,4‐bis(4‐dodecyloxyphenyl)buta‐1,2,3‐triene by dehalogenative polycondensation using Ni(cod)₂. The polymer was well soluble in usual organic solvents such as CHCl₃ and THF. Structural analyses and characterizations were carried out by IR, NMR, UV‐Vis, PL, and Raman spectroscopy, as well as electrical conductivity. It is suggested that π‐conjugation is extended to some degree through biphenylylene and butatrienylene linkages.     

Blue photo‐ and electroluminescence based on poly(2‐benzoyl‐1,4‐phenylene) and poly(2,5‐dibenzoyl‐1,4‐phenylene)

Poly(2‐benzoyl‐1,4‐phenylene) (PBP) and poly(2,5‐dibenzoyl‐1,4‐phenylene) (PDBP) were synthesized by coupling polymerization using a Ni catalyst of 2,5‐dichlorobenzophenone and 2,5‐dichloro‐1,4‐dibenzophenone, respectively. These polymers are soluble in common organic solvents, have high thermal stability and show bright blue photoluminescence. Light‐emitting diodes fabricated with these polymers as the active layer emit blue electroluminescence with wavelength at 433 nm for PBP and 475 nm for PDBP. Copyright © 1999 John Wiley & Sons, Ltd.     

A tetrabromo‐1,4‐ethanonaphthalene and related dibromo‐1,4‐ethenonaphthalene

(1RS,3RS,4RS,10SR)‐2,2,3,10‐Tetrabromo‐1,2,3,4‐tetrahydro‐1,4‐ethanonaphthalene, C₁₂H₁₀Br₄, (I), is the first structure to be reported with four Br atoms bound to a 1,4‐ethanonaphthalene framework and also the first which possesses three Br atoms in exo positions. Interactions between the Br atoms [three short intramolecular Br...Br distances of 3.1094 (4), 3.2669 (4) and 3.4415 (5) Å] have little effect on the C—C bond lengths but lead to significant twisting of the cage structure compared with the parent hydrocarbon, which is expected to be fully eclipsed at the two saturated C₂H₄ bridge positions. Chemically related (1SR,4RS)‐2,3‐dibromo‐1,4‐ethenonaphthalene, C₁₂H₈Br₂, (II), obtained by double dehydrobromination of (I), represents the first structure of any halogen‐substituted benzobarrelene. This cis‐dibromide shows little evidence of steric congestion at the double bond [Br...Br = 3.5276 (8) Å] as a consequence of the large C—C—Br angles [average C=C—Br angle = 126.15 (10)°].     

Catalytic Enantioselective Synthesis of 1,4‐Keto‐Alkenylboronate Esters and 1,4‐Dicarbonyls

A catalytic enantioselective method for the synthesis of 1,4‐keto‐alkenylboronate esters by a rhodium‐catalyzed conjugate addition pathway is disclosed. A variety of novel, bench‐stable alkenyl gem‐diboronate esters are synthesized. These easily accessible reagents react smoothly with a collection of cyclic α,β‐unsaturated ketones, generating a new C?C bond and stereocenter. Products are isolated in up to 99 % yield with greater than 20:1 E/Z and greater than 99:1 e.r. Mechanistic studies show the site‐selectivity of transmetalation and reactivity is ligand dependent. The utility of the approach is highlighted by gram‐scale synthesis of enantioenriched cyclic 1,4‐diketones, and stereoselective transformations of the products by hydrogenation, allylation, and isomerization.     

The Synthesis of Some Fused Pyrazolo‐1,4‐Naphthoquinones

New fused pyrazolo‐1,4‐naphthoquinones were prepared from the reaction of hydrazines with 6‐(4‐methyl‐3‐pentenyl)‐1,4‐naphthoquinone. The reaction was extended to hydroxylamine to afford the corresponding isoxazolo‐1,4‐napthoquinone compound.     

A microwave induced cyclisation of α‐phenylsulfonyl‐enaminoacrylates for the preparation of 4‐aryl‐4H‐1,4‐benzothiazine 1,1‐dioxide derivatives

Several 4‐aryl‐4H‐1,4‐benzothiazine 1,1‐dioxide derivatives have been prepared in good yields by microwave promoted cyclisation of α‐phenylsulfonyl‐enaminoacrylate intermediates in basic media. Benzothiazines were obtained without the use of a catalyst in short reaction times.     

New succinyl‐spaced pyrazoles: Regioselective synthesis of 1,4‐bis[5‐(trichloromethyl)‐1H‐pyrazol‐1‐yl]butane‐1,4‐diones

The facile and convenient access by a conventional procedure in ethanol as solvent to a new series of succinyl‐spaced pyrazoles including 1,4‐bis[5‐(trichloromethyl)‐5‐hydroxy‐4,5‐dihydro‐1H‐pyrazol‐1‐yl]butane‐1,4‐diones (64–82%) and the respective dehydrated derivatives as 1,4‐bis[5‐(trichloromethyl)‐1H‐pyrazol‐1‐yl]butane‐1,4‐diones in 57–82% yields, from the regioselective cyclocondensation reactions of 4‐substituted 4‐methoxy‐1,1,1‐trichloroalk‐3‐en‐2‐ones with succinic acid dihydrazide, where the 4‐substituents are Me, Ph, 4‐FC₆H₄, 4‐ClC₆H₄, 4‐NO₂C₆H₄, 2‐furyl, and 2‐thienyl, is reported. J. Heterocyclic Chem., 2011.     

1,4‐Bis(triisopropyl­silyl)buta‐1,3‐diyne and 1,4‐bis­(biphenyl‐4‐yl)buta‐1,3‐diyne

We report the single crystal structures of 1,4‐bis­(triisopropyl­silyl)buta‐1,3‐diyne, C₂₂H₄₂Si₂, and 1,4‐bis­(biphenyl‐4‐yl)buta‐1,3‐diyne, C₂₈H₁₈, the packing in both of which illustrates the versatility of weak C—H⋯π supra­molecular inter­actions in dictating the overall solid‐state structures.     

Biaryl Synthesis by Ring‐Opening Friedel–Crafts Arylation of 1,4‐Epoxy‐1,4‐dihydronaphthalenes Catalyzed by Iron Trichloride

Biaryl and heterobiaryl compounds are important frameworks across a range of fields including pharmaceutical and functional material chemistries. We have accomplished the efficient synthesis of various naphthalene‐linked arenes and heteroarenes as biaryls and heterobiaryls by the FeCl₃‐catalyzed Friedel‐Crafts reactions accompanied by the ring‐opening of the 1,4‐epoxy moiety of 1,4‐epoxy‐1,4‐dihydronaphthalenes. Especially, it is noteworthy that 1‐silylated substrates were regioselectively transformed to the 3‐aryl‐1‐silylnaphthalenes and the double Friedel–Crafts reactions using thiophene derivatives could directly produce the corresponding bis‐naphthlated thiophene derivatives.     

New photoluminescent conjugated polymers with 1,4‐dioxo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (DPP) and 1,4‐phenylene units in the main chain

A series of π‐conjugated polymers and copolymers containing 1,4‐dioxo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (also known as 2,5‐dihydro‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole‐1,4‐dione) (DPP) and 1,4‐phenylene units in the main chain is described. The polymers are synthesised using the palladium‐catalysed aryl‐aryl coupling reaction (Suzuki coupling) of 2,5‐dihexylbenzene‐1,4‐diboronic acid with 1,4‐dioxo‐2,5‐dihexyl‐3,6‐di(4‐bromophenyl)pyrrolo[3,4‐c]pyrrole and 1,4‐dibromo‐2,5‐dihexylbenzene in different molar ratios. Soluble hairy rod‐type polymers with molecular weights up to 21 000 are obtained. Polymer solutions in common organic solvents such as chloroform or xylene are of orange colour (λ_max = 488 nm) and show strong photoluminescence (λ_max = 544 nm). The photochemical stability is found to be higher than for corresponding saturated polymers containing isolated DPP units in the main chain. Good solubility and processability into thin films render the compounds suitable for electronic applications.     

Three 2,5‐dialkoxy‐1,4‐diethynylbenzene derivatives

2,5‐Diethoxy‐1,4‐bis[(trimethylsilyl)ethynyl]benzene, C₂₀H₃₀O₂Si₂, (I), constitutes one of the first structurally characterized examples of a family of compounds, viz. the 2,5‐dialkoxy‐1,4‐bis[(trimethylsilyl)ethynyl]benzene derivatives, used in the preparation of oligo(phenyleneethynylene)s via Pd/Cu‐catalysed cross‐coupling. 2,5‐Diethoxy‐1,4‐diethynylbenzene, C₁₄H₁₄O₂, (II), results from protodesilylation of (I). 1,4‐Diethynyl‐2,5‐bis(heptyloxy)benzene, C₂₄H₃₄O₂, (III), is a long alkyloxy chain analogue of (II). The molecules of compounds (I)–(III) are located on sites with crystallographic inversion symmetry. The large substituents either in the alkynyl group or in the benzene ring have a marked effect on the packing and intermolecular interactions of adjacent molecules. All the compounds exhibit weak intermolecular interactions that are only slightly shorter than the sum of the van der Waals radii of the interacting atoms. Compound (I) displays C—H...π interactions between the methylene H atoms and the acetylenic C atom. Compound (II) shows π–π interactions between the acetylenic C atoms, complemented by C—H...π interactions between the methyl H atoms and the acetylenic C atoms. Unlike (I) or (II), compound (III) has weak nonclassical hydrogen‐bond‐type interactions between the acetylenic H atoms and the ether O atoms.     

Chain composition dependence of luminescence properties for copolymers of 2‐methoxy‐5‐2′‐ethyl‐hexyloxy‐1,4‐phenylenevinylene and 2,3‐diphenyl‐5‐octyl‐1,4‐phenylenevinylene

The copolymers of 2‐methoxy‐5‐2′‐ethyl‐hexyloxy‐1,4‐phenylenevinylene (MEH‐PV) and 2,3‐diphenyl‐5‐octyl‐1,4‐phenylenevinylene were prepared via the Gilch route with their chain compositions and the reactivity ratios of the monomers estimated by ¹H NMR spectroscopy. The results indicated that the copolymers tended to form an alternative copolymer as the feed ratio of the monomers closed to one‐half. When an individual copolymer solution in tetrahydrofuran was spun‐cast to form a film, the MEH‐PV units were able to attract the like units from the adjacent chains. As a result, the ultraviolet–visible absorption spectrum of the alternative copolymer in film form was broader than the spectra of those with different compositions. The photoluminescence spectra of the copolymers in film form exhibited the characteristic shoulder of poly(2‐methoxy‐5‐2′‐ethyl‐hexyloxy‐1,4‐phenylenevinylene), even though the content of MEH‐PV units was not great enough for the formation of repeat units in sequence. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2180–2186, 2003     

Enaminones in Heterocyclic Syntheses: Part 4. A New One‐Step Synthetic Route to Pyrrolo[3,4‐b]pyridine and Convenient Syntheses of 1,4‐Dihydropyridines and 1,1′‐(1,4‐Phenylene)bis(1,4‐dihydropyridine)

Reactions of cyano olefins with (i) enamino imides afforded novel pyrrolo[3,4‐b]pyridines; (ii) enamino esters afforded new 1,4‐dihydropyridines; and (iii) bisenamino ester afforded new 1,1′‐(1,4‐phenylene)bis(1,4‐dihydropyridine). The new derivatives are planned as suggested drug candidates.     

Controlled stereochemistry of polyamides derived from cis/trans‐1,4‐cyclohexanedicarboxylic acid

A series of copolyamides 12.y was synthesized either with y = 6, or 1,4‐cyclohexanedicarboxylic acid (1,4‐CHDA) residue, or a mixture of both. The influence of the synthetic route of 1,4‐CHDA containing polyamides on the obtained cis–trans ratio of the incorporated 1,4‐CHDA was investigated. The use of acid chlorides provided a synthetic route with full control of the cis–trans ratio of the 1,4‐CHDA residue during synthesis, whereas synthesis at elevated pressure and temperature caused isomerization. The content and cis–trans ratio of 1,4‐CHDA in the copolyamides were determined by solution ¹³C NMR spectroscopy. Increasing the degree of partial substitution of the adipic acid by 1,4‐CHDA resulted in an increase in T_m, even for low molar precentages of 1,4‐CHDA. This phenomenon points to isomorphous crystallization of both the 12.6 and 12.CHDA repeating units. The mps of the synthesized polyamides were independent of the initial cis–trans ratio of 1,4‐CHDA, provided that the samples were annealed at 300 °C before DSC analysis. The polyamides exhibited a different melting pattern depending on the 1,4‐CHDA content. At a low a 1,4‐CHDA content a net exothermic recrystallization occurred during melting, whereas at higher contents of 1,4‐CHDA this recrystallization occurs to a lesser extent, and two separate melting areas are observed. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 833–840, 2001     

A novel parallel interpenetrating two‐dimensional (4,4) network: poly[[μ2‐1,4‐bis(imidazol‐1‐ylmethyl)benzene](μ2‐naphthalene‐1,4‐dicarboxylato)zinc(II)]

In the title coordination compound, [Zn(C₁₂H₆O₄)(C₁₄H₁₄N₄)]_n, the two Zn^II centers exhibit different coordination environments. One Zn^II center is four‐coordinated in a distorted tetrahedral environment surrounded by two carboxylate O atoms from two different naphthalene‐1,4‐dicarboxylate (1,4‐ndc) anions and two N atoms from two distinct 1,4‐bis(imidazol‐1‐ylmethyl)benzene (1,4‐bix) ligands. The coordination of the second Zn^II center comprises two N atoms from two different 1,4‐bix ligands and three carboxylate O atoms from two different 1,4‐ndc ligands in a highly distorted square‐pyramidal environment. The 1,4‐bix ligand and the 1,4‐ndc anion link adjacent Zn^II centers into a two‐dimensional four‐connected (4,4) network. The two (4,4) networks are interpenetrated in a parallel mode.