Molybdenum amido complexes with single Mo-N bonds: synthesis,structure, and reactivity

Reactions of the complex [MoCl(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)] (1) (phen=1,10-phenanthroline) with potassium arylamides were used to synthesize the amido complexes [Mo(N(R)Ar)(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)] (R=H, Ar=Ph, 2 a; R=H, Ar=p-tolyl, 2 b; R=Me, Ar=Ph; 2 c). For 2 b the Mo-N(amido) bond length (2.105(4) A) is consistent with it being a single bond, with which the metal attains an 18-electron configuration. The reaction of 2 b with HOTf affords the amino complex [Mo(eta(3)-C(3)H(4)-Me-2)(NH(2)(p-tol))(CO)(2)(phen)]OTf (3-OTf). Treatment of 3-OTf with nBuLi or KN(SiMe(3))(2) regenerates 2 b. The new amido complexes react with CS(2), arylisothiocyanates and maleic anhydride. A single product corresponding to the formal insertion of the electrophile into the Mo-N(amido) bond is obtained in each case. For maleic anhydride, ring opening accompanied the formation of the insertion product. The reaction of 2 b with maleimide affords [Mo(eta(3)-C(3)H(4)-Me-2)[NC(O)CH=CHC(O)](CO)(2)(phen)] (7), which results from simple acid-base metathesis. The reaction of 2 b with (p-tol)NCO affords [[Mo(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)](2)(eta(2)-MoO(4))] (8), which corresponds to oxidation of one third of the metal atoms to Mo(VI). Complex 8 was also obtained in the reactions of 2 b with CO(2) or the lactide 3,6-dimethyl-1,4-dioxane-2,5-dione. The structures of the compounds 2 b, 3-OTf, [Mo(eta(3)-C(3)H(4)-Me-2)[SC(S)(N(H)Ph)](CO)(2)(phen)] (4), [Mo(eta(3)-C(3)H(4)-Me-2)[SC(N(p-tol))(NH(p-tol))](CO)(2)(phen)] (5 a), and [Mo(eta(3)-C(3)H(4)-Me-2)[OC(O)CH=CHC(O)(NH(p-tol))](CO)(2)(phen)] (6), 7, and 8 (both the free complex and its N,N'-di(p-tolyl)urea adduct) were determined by X-ray diffraction.     

The synthesis, characterisation and reactivity of 2-phosphanylethylcyclopentadienyl complexes of cobalt, rhodium and iridium

2-Phosphanylethylcyclopentadienyl lithium compounds, Li[C(5)R'(4)(CH(2))(2)PR(2)] (R = Et, R' = H or Me, R = Ph, R' = Me), have been prepared from the reaction of spirohydrocarbons C(5)R'(4)(C(2)H(4)) with LiPR(2). C(5)Et(4)HSiMe(2)CH(2)PMe(2), was prepared from reaction of Li[C(5)Et(4)] with Me(2)SiCl(2) followed by Me(2)PCH(2)Li. The lithium salts were reacted with [RhCl(CO)(2)](2), [IrCl(CO)(3)] or [Co(2)(CO)(8)] to give [M(C(5)R'(4)(CH(2))(2)PR(2))(CO)] (M = Rh, R = Et, R' = H or Me, R = Ph, R' = Me; M = Ir or Co, R = Et, R' = Me), which have been fully characterised, in many cases crystallographically as monomers with coordination of the phosphorus atom and the cyclopentadienyl ring. The values of nu(CO) for these complexes are usually lower than those for the analogous complexes without the bridge between the cyclopentadienyl ring and the phosphine, the exception being [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (Cp' = C(5)Me(4)), the most electron rich of the complexes. [Rh(C(5)Et(4)SiMe(2)CH(2)PMe(2))(CO)] may be a dimer. [Co(2)(CO)(8)] reacts with C(5)H(5)(CH(2))(2)PEt(2) or C(5)Et(4)HSiMe(2)CH(2)PMe(2) (L) to give binuclear complexes of the form [Co(2)(CO)(6)L(2)] with almost linear PCoCoP skeletons. [Rh(Cp'(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are active for methanol carbonylation at 150 degrees C and 27 bar CO, with the rate using [Rh(Cp'(CH(2))(2)PPh(2))(CO)] (0.81 mol dm(-3) h(-1)) being higher than that for [RhI(2)(CO)(2)](-) (0.64 mol dm(-3) h(-1)). The most electron rich complex, [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (0.38 mol dm(-3) h(-1)) gave a comparable rate to [Cp*Rh(PEt(3))(CO)] (0.30 mol dm(-3) h(-1)), which was unstable towards oxidation of the phosphine. [Rh(Cp'(CH(2))(2)PEt(2))I(2)], which is inactive for methanol carbonylation, was isolated after the methanol carbonylation reaction using [Rh(Cp'(CH(2))(2)PEt(2))(CO)]. Neither of [M(Cp'(CH(2))(2)PEt(2))(CO)] (M = Co or Ir) was active for methanol carbonylation under these conditions, nor under many other conditions investigated, except that [Ir(Cp'(CH(2))(2)PEt(2))(CO)] showed some activity at higher temperature (190 degrees C), probably as a result of degradation to [IrI(2)(CO)(2)](-). [M(Cp'(CH(2))(2)PEt(2))(CO)] react with MeI to give [M(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] (M = Co or Rh) or [Ir(Cp'(CH(2))(2)PEt(2))Me(CO)]I. The rates of oxidative addition of MeI to [Rh(C(5)H(4)(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are 62 and 1770 times faster than to [Cp*Rh(CO)(2)]. Methyl migration is slower, however. High pressure NMR studies show that [Co(Cp'(CH(2))(2)PEt(2))(CO)] and [Cp*Rh(PEt(3))(CO)] are unstable towards phosphine oxidation and/or quaternisation under methanol carbonylation conditions, but that [Rh(Cp'(CH(2))(2)PEt(2))(CO)] does not exhibit phosphine degradation, eventually producing inactive [Rh(Cp'(CH(2))(2)PEt(2))I(2)] at least under conditions of poor gas mixing. The observation of [Rh(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] under methanol carbonylation conditions suggests that the rhodium centre has become so electron rich that reductive elimination of ethanoyl iodide has become rate determining for methanol carbonylation. In addition to the high electron density at rhodium.     

Imine insertion into a late metal-carbon bond to form a stable amido complex

An arylrhodium(I) complex containing a labile dative ligand was prepared, and its reactivity toward aryl imines was investigated. The arylrhodium(I) complex (DPPE)Rh(C5H5N)(p-tol), 2, was isolated in 65% yield from [(DPPE)Rh(mu-Cl)]2, pyridine, and p-tolyllithium. Reaction of 2 with the aldimine (p-tol)CH=N(C6H4-p-CO2Me) (3a-Tol) gave the Rh amide insertion product 4 in 88% isolated yield. The solid-state structure of 4 was determined by single-crystal X-ray diffraction. The reaction of 2 with the electron-neutral and electron-rich aldimines (Ph)CH=NPh (3b) and (p-tol)CH=N(C6H4-p-OMe) (3c) also appeared to involve insertion, but the amido complexes formed from these insertions were not stable. Thus, reaction of 2 with 3b, followed by addition of Et3NHCl, gave the amine and ketimine products (Ph)(p-tol)CH-NHPh, 5, and (p-tol)(Ph)C=N(Ph), 6, in 25% and 50% yields. Several lines of data indicate that these products are formed by a sequence of transformations involving insertion of imine to give a Rh amide intermediate, beta-hydrogen elimination, cyclometalation to form a bound imine and H2, and protonolysis of the metallacycle upon addition of Et3NHCl. Consistent with this proposal, the proposed metallacycle containing the ortho-metalated ketimine ligand (p-tol)2C=N(C6H4-p-OMe) was isolated and characterized by single-crystal X-ray diffraction.     

Coordination-driven self-assembly, structures, and dynamic properties of diplatinum hexatriynediyl and butadiynediyl complexes in which the sp carbon chains are shielded by sp3 carbon chains: towards endgroup-endgroup interactions

Sequential reactions of trans-(C6F5)(p-tol3P)2Pt(C[triple chemical bond]C)3SiEt3 (PtC6SiEt3) with nBu4N+ F(-) (THF/methanol), PtCl, KPF6/tBuOK, and CuCl give trans,trans-[(C6F5){(p-tol3P)2}Pt(C[triple chemical bond]C)3Pt{(Pp-tol3)2}(C6F5)] (PtC6Pt) in 95 % yield on multigram scales. Reactions of PtC6Pt and Ar2P(CH2)mPAr2 afford substitution products trans,trans-[(C6F5){(Ar2P(CH2)mPAr2)}Pt(C[triple chemical bond]C)3Pt{(Ar2P(CH2)mPAr2)}(C6F5)] (PtC6Pt-m/Ar; m/Ar=8/p-tol, 78 %; 10/Ph, 82 %; 11/Ph, 69 %; 12/Ph, 57 %; 14/p-tol, 57 %; 14/p-C6H4-tBu, 71 %), in which the diphosphines span the square planar platinum endgroups. An analogous reaction with PEt3 gives a tetrakis PEt3 complex Pt'C6Pt' (72 %). The crystal structures of PtC6Pt, Pt'C6Pt', PtC6Pt-10/Ph, PtC6Pt-11/Ph, and PtC6Pt-14/p-tol or solvates thereof are compared. In PtC6Pt, the endgroups can avoid van der Waals contact, and define angles of 0 degrees . In PtC6Pt-14/p-tol, the sp3 chains twist around the sp chain in a chiral double-helical motif, with an endgroup/endgroup angle of 189 degrees . The sp3 chains are too short to adopt analogous conformations in the other complexes, but laterally shield the sp chain. NMR spectroscopy shows that the helical enantiomers of PtC6Pt-14/p-tol rapidly interconvert in solution at low temperature. A crystal structure of PtC4Pt shows endgroups that are in van der Waals contact and define an angle of 41 degrees . Reactions with Ar2P(CH2)8PAr2 give PtC4Pt-8/Ar (Ar=Ph, 53 %; p-tol, 87 %). Low-temperature NMR spectroscopy establish non-helical chiral conformations. Electrochemical oxidations of the diplatinum complexes are analyzed, the reversibilities of which decrease with increasing sp chain length.     

Divalent dirhodium imido complexes: formation, structure, and alkyne cycloaddition reactivity

Dirhodium amido complexes [(Cp*Rh)2(mu2-NHPh)(mu2-X)] (X = NHPh (2), Cl (3), OMe (4); Cp* = eta5-C5Me5) were prepared by chloride displacement of [Cp*Rh(mu2-Cl)]2 (1) and have been used as precursors to a dirhodium imido species [Cp*Rh(mu2-NPh)RhCp*]. The imido species can be trapped by PMe3 to give the adduct [Cp*Rh(mu2-NPh)Rh(PMe3)Cp*] (5) and undergoes a formal [2 + 2] cycloaddition reaction with unactivated alkynes to give the azametallacycles [Cp*Rh(mu2-eta2:eta3-R1CCR2NPh)RhCp*] (R1 = R2 = Ph (6a), R1 = H, R2 = t-Bu (6b), R1 = H, R2 = p-tol (6c)). Isolation of a relevant unsaturated imido complex [Cp*Rh(mu2-NAr)RhCp*] (7) was achieved by the use of a sterically hindered LiNHAr (Ar = 2,6-diisopropylphenyl) reagent in a metathesis reaction with 1. X-ray structures of 2, 6a, 7 and the terminal isocyanide adduct [Cp*Rh(mu2-NAr)Rh(t-BuNC)Cp*] (8) are reported.     

Dinuclear rhodium and iridium complexes with mixed amido/methoxo and amido/hydroxo bridges

The reactions of [[M(mu-OMe)(cod)](2)] (M = Rh, Ir; cod = 1,5- cyclooctadiene) with p-tolylamine, alpha-naphthylamine, and p-nitroaniline gave complexes with mixed-bridging ligands, [[M(cod)](2)(mu-NHAr)(mu-OMe)]. Similarly, the related complexes [[Rh(cod)](2)(mu-NHAr)(mu-OH)] were prepared from the reactions of [[Rh(mu-OH)(cod)](2)] with p-tolylamine, alpha-naphthylamine, and p-nitroaniline. The reactions of [[Rh(mu-OR)(cod)](2)] (R = H, Me) with o-nitroaniline gave the mononuclear complex [Rh(o-NO(2)C(6)H(4)NH)(cod)]. The syntheses of the amido complexes involve a proton exchange reaction from the amines to the methoxo or hydroxo ligands and the coordination of the amide ligand. These reactions were found to be reversible for the dinuclear complexes. The structure of [[Rh(cod)](2)(mu-NH[p-NO(2)C(6)H(4)])(mu-OMe)] shows two edge-shared square-planar rhodium centers folded at the edge with an anti configuration of the bridging ligands. The complex [[Rh(cod)](2)(mu-NH[alpha-naphthyl])(mu-OH)] cocrystallizes with [[Rh(mu-OH)(cod)](2)] and THF, forming a supramolecular aggregate supported by five hydrogen bridges in the solid state. In the mononuclear [Rh(o-NO(2)C(6)H(4)NH)(cod)] complex the o-nitroamido ligand chelates the rhodium center through the amido nitrogen and an oxygen of the nitro group.     

Synthesis and characterisation of triselenocarbonate [CSe3]2- complexes

[Pt(CSe3)(PR3)2] (PR3= PMe3, PMe2Ph, PPh3, P(p-tol)3, 1/2 dppp, 1/2 dppf) were all obtained by the reaction of the appropriate metal halide containing complex with carbon diselenide in liquid ammonia. Similar reaction with [Pt(Cl)2(dppe)] gave a mixture of triselenocarbonate and perselenocarbonate complexes. [{Pt(mu-CSe3)(PEt3)}4] was formed when the analogous procedure was carried out using [Pt(Cl)2(PEt3)2]. Further reaction of [Pt(CSe3)(PMe2Ph)2] with [M(CO)6] (M = Cr, W, Mo) yielded bimetallic species of the type [Pt(PMe2Ph)2(CSe3)M(CO)5] (M = Cr, W, Mo). The dimeric triselenocarbonate complexes [M{(CSe3)(eta5-C5Me5)}2] (M = Rh, Ir) and [{M(CSe3)(eta6-p-MeC6H4(i)Pr)}2] (M = Ru, Os) have been synthesised from the appropriate transition metal dimer starting material. The triselenocarbonate ligand is Se,Se' bidentate in the monomeric complexes. In the tetrameric structure the exocyclic selenium atoms link the four platinum centres together.     

Oxygen reduction reactions of monometallic rhodium hydride complexes

Selective reduction of oxygen is mediated by a series of monometallic rhodium(III) hydride complexes. Oxidative addition of HCl to trans-Rh(I)Cl(L)(PEt(3))(2) (1a, L = CO; 1b, L = 2,6-dimethylphenylisocyanide (CNXy); 1c, L = 1-adamantylisocyanide (CNAd)) produces the corresponding Rh(III) hydride complex cis-trans-Rh(III)Cl(2)H(L)(PEt(3))(2) (2a-c). The measured equilibrium constants for the HCl-addition reactions show a pronounced dependence on the identity of the "L" ligand. The hydride complexes effect the reduction of O(2) to water in the presence of HCl, generating trans-Rh(III)Cl(3)(L)(PEt(3))(2) (3a-c) as the metal-containing product. In the case of 2a, smooth conversion to 3a proceeds without spectroscopic evidence for an intermediate species. For 2b/c, an aqua intermediate, cis-trans-[Rh(III)(OH(2))Cl(2)(L)(PEt(3))(2)]Cl (5b/c), forms along the pathway to producing 3b/c as the final products. The aqua complexes were independently prepared by treating peroxo complexes trans-Rh(III)Cl(L)(η(2)-O(2))(PEt(3))(2) (4b/c) with HCl to rapidly produce a mixture of 5b/c and 3b/c. The reactivity of the peroxo species demonstrates that they are plausible intermediates in the O(2)-reduction chemistry of hydride complexes 2a-c. These results together show that monometallic rhodium hydride complexes are capable of promoting selective reduction of oxygen to water and that this reaction may be controlled with systematic alteration of the ancillary ligand set.     

Comparison of structure and reactivity of phosphine-amido and hemilabile phosphine-amine chelates of rhodium

A series of mono- and binuclear rhodium(I) complexes bearing ortho-phosphinoanilido and ortho-phosphinoaniline ligands has been synthesized. Reactions of the protic monophosphinoanilines, Ph(2)PAr or PhPAr(2) (Ar = o-C(6)H(4)NHMe), with 0.5 equiv of [Rh(μ-OMe)(COD)](2) result in the formation of the neutral amido complexes, [Rh(COD)(P,N-Ph(2)PAr(-))] or [Rh(COD)(P,N-PhP(Ar(-))Ar)] (Ar(-) = o-C(6)H(4)NMe(-)), respectively, through stoichiometrically controlled deprotonation of an amine by the internal methoxide ion. Similarly, the binuclear complex, [Rh(2)(COD)(2)(μ-P,N,P',N'-mapm(2-))] (mapm(2-) = Ar(Ar(-))PCH(2)P(Ar(-))Ar), can be prepared by reaction of the protic diphosphinoaniline, mapm (Ar(2)PCH(2)PAr(2)), with 1 equiv of [Rh(μ-OMe)(COD)](2). An analogous series of hemilabile phosphine-amine compounds can be generated by reactions of monophosphinoanilines, Ph(2)PAr' or PhPAr'(2) (Ar' = o-C(6)H(4)NMe(2)), with 1 equiv of [Rh(NBD)(2)][BF(4)] to generate [Rh(NBD)(P,N-Ph(2)PAr')][BF(4)] or [Rh(NBD)(P,N-PhPAr'(2))][BF(4)], respectively, or by reactions of diphosphinoanilines, mapm or dmapm (Ar'(2)PCH(2)PAr'(2)), with 2 equiv of the rhodium precursor to generate [Rh(2)(NBD)(2)(μ-P,N,P',N'-mapm)][BF(4)](2) or [Rh(2)(NBD)(2)(μ-P,N,P',N'-dmapm)][BF(4)](2), respectively. Displacement of the diolefin from [Rh(COD)(P,N-Ph(2)PAr(-))] by 1,2-bis(diphenylphosphino)ethane (dppe) yields [Rh(P,P'-dppe)(P,N-Ph(2)PAr(-))] which, while unreactive to H(2), reacts readily and irreversibly with oxygen to form the peroxo complex, [RhO(2)(P,P'-dppe)(P,N-Ph(2)PAr(-))], and with iodomethane to yield [RhI(CH(3))(P,P'-dppe)(P,N-Ph(2)PAr(-))]. Hemilabile phosphine-amine compounds can also be prepared by reactions of [Rh(P,P'-dppe)(P,N-Ph(2)PAr(-))] with Me(3)OBF(4) or HBF(4)·Et(2)O, resulting in (thermodynamic) additions at nitrogen to form [Rh(P,P'-dppe)(P,N-Ph(2)PAr')][BF(4)] or [Rh(P,P'-dppe)(P,N-Ph(2)PAr)][BF(4)], respectively. The nonlabile phosphine-amido and hemilabile phosphine-amine complexes were tested as catalysts for the silylation of styrene. The amido species do not require the use of solvents in reaction media, can be easily removed from product mixtures by protonation, and appear to be more active than their hemilabile, cationic congeners. Reactions catalyzed by either amido or amine complexes favor dehydrogenative silylation in the presence of excess olefin, showing modest selectivities for a single vinylsilane product. The binuclear complexes, which were prepared in an effort to explore possible catalytic enhancements of reactivity due to metal-metal cooperativity, are in fact somewhat less active than mononuclear species, discounting this possibility.     

Extremely bulky amido-group 14 element chloride complexes: potential synthons for low oxidation state main group chemistry

The preparation of a series of extremely bulky secondary amines, Ar*N(H)SiR(3) (Ar* = C(6)H(2){C(H)Ph(2)}(2)Me-2,6,4; R(3) = Me(3), MePh(2) or Ph(3)) is described. Their deprotonation with either LiBu(n), NaH or KH yields alkali metal amide complexes, several monomeric examples of which, [Li(L){N(SiMe(3))(Ar*)}] (L = OEt(2) or THF), [Na(THF)(3){N(SiMe(3))(Ar*)}] and [K(OEt(2)){N(SiPh(3))(Ar*)], have been crystallographically characterised. Reactions of the lithium amides with germanium, tin or lead dichloride have yielded the first structurally characterised two-coordinate, monomeric amido germanium(II) and tin(II) chloride complexes, [{(SiR(3))(Ar*)N}ECl] (E = Ge or Sn; R = Me or Ph), and a chloride bridged amido-lead(II) dimer, [{[(SiMe(3))(Ar*)N]Pb(μ-Cl)}(2)]. DFT calculations on [{(SiMe(3))(Ar*)N}GeCl] show its HOMO to exhibit Ge lone pair character and its LUMO to encompass its Ge based p-orbital. A series of bulky amido silicon(IV) chloride complexes have also been prepared and several examples, [{(SiR(3))(Ar*)N}SiCl(3)] (R(3) = Me(3), MePh(2)) and [{(SiMe(3))(Ar*)N}SiHCl(2)], were crystallographically characterised. The sterically hindered group 14 complexes reported in this study hold significant potential as precursors for kinetically stabilised low oxidation state and/or low coordination number group 14 complexes.     

A new family of dinuclear rhodium complexes containing tertiary phosphanes in a semibridging or doubly bridging bonding mode

The reactions of [Rh(2)Cl(kappa(2)-acac)(mu-CPh(2))(2)(mu-SbiPr(3))] (3) and [Rh(2)(kappa(2)-acac)(2)(mu-CPh(2))(2)(mu-SbiPr(3))] (4) with PMe(3) lead to exchange of the bridging ligand and afford the novel PMe(3)-bridged counterparts 5 and 6, in which the phosphane occupies a semibridging (5) or a doubly bridging (6) position. In both cases, the bonding mode was confirmed crystallographically. Treatment of 6 with CO causes a shift of PMe(3) from a bridging to a terminal position and gives the unsymmetrical complex [(kappa(2)-acac)Rh(mu-CPh(2))(2)(mu-CO)Rh(PMe(3))(kappa(2)-acac)] (7). Similarly to 5 and 6, the related compounds 10 and 11 with one or two acac-f(3) ligands were prepared. While both PEt(3) and PnBu(3) react with 3 by exchange of the bridging stibane for phosphane to give compounds 12 and 13, the reactions of 4 with PMePh(2) and PnBu(3) afford the mixed-valent Rh(0)Rh(II) complexes [(PR(3))Rh(mu-CPh(2))(2)Rh(kappa(2)-acac)(2)] (17, 18) in high yields. In contrast, treatment of 4 with PEt(3) and PMe(2)Ph generates the phosphane-bridged compounds [Rh(2)(kappa(2)-acac)(2)(mu-CPh(2))(2)(mu-PR(3))] (14, 15) exclusively. Stirring a solution of 14 (R=Et) in benzene for 15 h at room temperature leads to complete conversion to the mixed-valent isomer 16. The reaction of 6 with an equimolar amount of CR(3)CO(2)H (R=F, H) or phenol in the molar ratio of 1:10 results in substitution of one acac by one trifluoracetate, acetate, or phenolate ligand without disturbing the [Rh(2)(mu-CPh(2))(2)(mu-PR(3))] core. From 6 and an excess of CR(3)CO(2)H, the symmetrical bis(trifluoracetato) and bis(acetate) derivatives [Rh(2)(kappa(2)-O(2)CCR(3))(2)(mu-CPh(2))(2)(mu-PMe(3))] (21, 22) were obtained.     

Mechanistic insight into protonolysis and cis-trans isomerization of benzylplatinum(II) complexes assisted by weak ligand-to-metal interactions. A combined kinetic and DFT study

Low-temperature NMR measurements showed that protonolysis and deuterolysis by H(D)X acids on meta- and para-substituted dibenzylplatinum(II) complexes cis-[Pt(CH(2)Ar)(2)(PEt(3))(2)] (Ar = C(6)H(4)Y(-); Y = 4-Me, 1a; 3-Me, 1b; H, 1c; 4-F, 1d; 3-F, 1e; 4-Cl, 1f; 3-Cl, 1g; 3-CF(3), 1h) in CD(3)OD leads directly to the formation of trans-[Pt(CH(2)Ar)(PEt(3))(2)(CD(3)OD)]X (4a-4h) and toluene derivatives. The reaction obeys the rate law k(obsd) = k(H)[H(+)]. For CH(2)Ar = CH(2)C(6)H(5)(-), k(H) = 176 ± 3 M(-1) s(-1) and k(D) = 185 ± 5 M(-1) s(-1) at 298.2 K, ΔH(double dagger) = 46 ± 1 kJ mol(-1) and ΔS(double dagger) = -47 ± 1 J K(-1) mol(-1). In contrast, in acetonitrile-d(3), three subsequent stages can be distinguished, at different temperature ranges: (i) instantaneous formation of new benzylhydridoplatinum(IV) complexes cis-[Pt(CH(2)Ar)(2)(H)(CD(3)CN)(PEt(3))(2)]X (2a-2h, at 230 K), (ii) reductive elimination of 2a-2h to yield cis-[Pt(CH(2)Ar)(CD(3)CN)(PEt(3))(2)]X (3a-3h) and toluene derivatives (in the range 230-255 K), and finally (iii) spontaneous isomerization of the cis cationic solvento species to the corresponding trans isomers (4a-4h, in the range 260-280 K). All compounds were detected and fully characterized through their (1)H and (31)P{(1)H} NMR spectra. Kinetics monitored by (1)H and (31)P{(1)H} NMR and isotopic scrambling experiments on cis-[Pt(CH(2)Ar)(2)(H)(CD(3)CN)(PEt(3))(2)]X gave some insight onto the mechanism of reductive elimination of 2a-2h. Systematic kinetics of isomerization of 3a-3h were followed in the temperature range 285-320 K by stopped-flow techniques. The process goes, as expected, through the relatively slow dissociative loss of the weakly bonded solvent molecule and interconversion of two geometrically distinct T-shaped three-coordinate intermediates. The dissociation energy depends upon the solvent-coordinating ability. DFT optimization reveals that along the energy profile the "cis-like" [Pt(CH(2)Ar)(PMe(3))(2)](+) intermediate is strongly stabilized by a Pt···η(2)-C1-C(ipso) bond between the unsaturated metal and benzyl carbons. The value of the ensuing stabilization energy was estimated by computational data to be greater than that found for similar β-agostic Pt···η(2)-CH interactions with alkyl groups containing β-hydrogens. An observed consequence of the strong stabilization of "cis"-[Pt(η(2)-CH(2)Ar)(PMe(3))(2)](+) is the remarkable acceleration of the rate of isomerization, greater than that produced by the so-called "β-hydrogen kinetic effect". Kinetic and DFT data concur to indicate that electron donation by substituents on the benzyl ring leads to further stabilization of the "cis"-[Pt(η(2)-CH(2)Ar)(PMe(3))(2)](+) cationic species.     

Synthesis and Characterization of Four Consecutive Members of the Five-Member [Fe(6)S(8)(PEt(3))(6)](n)()(+) (n = 0-4) Cluster Electron Transfer Series

The clusters [Fe(6)S(8)(PEt(3))(6)](+,2+) have been shown by other investigators to be formed by the reaction of [Fe(OH(2))(6)](2+) and H(2)S, to contain face-capped octahedral Fe(6)S(8) cores, and to be components of the five-membered electron transfer series [Fe(6)S(8)(PEt(3))(6)](n)()(+) (n = 0-4) estalished electrochemically. We have prepared two additional series members. Reaction of [Fe(6)S(8)(PEt(3))(6)](2+) with iodine in dichloromethane affords [Fe(6)S(8)(PEt(3))(6)](3+), isolated as the perchlorate salt (48%). Reduction of [Fe(6)S(8)(PEt(3))(6)](2+) with Na(Ph(2)CO) in acetonitrile/THF produces the neutral cluster [Fe(6)S(8)(PEt(3))(6)] (65%). The structures of the four clusters with n = 0, 1+, 2+, 3+ were determined at 223 K. The compounds [Fe(6)S(8)(PEt(3))(6)](ClO(4))(3), [Fe(6)S(8)(PEt(3))(6)] crystallize in trigonal space group R&thremacr;c with a = 21.691(4), 16.951(4) ?, c = 23.235(6), 19.369(4) ?, and Z = 6, 3. The compounds [Fe(6)S(8)(PEt(3))(6)](BF(4))(2), [Fe(6)S(8)(PEt(3))(6)](BF(4)).2MeCN were obtained in monoclinic space groups P2(1)/c, C2/c with a = 11.673(3), 16.371(4) ?, b = 20.810(5), 16.796(4) ?, c = 12.438(4), 23.617(7) ?, beta = 96.10(2), 97.98(2) degrees, and Z = 2, 4. [Fe(6)S(8)(PEt(3))(6)](BPh(4))(2) occurred in trigonal space group P&onemacr; with a = 11.792(4) ?, b = 14.350(5) ?, c = 15.536(6) ?, alpha = 115.33(3) degrees, beta = 90.34(3) degrees, gamma = 104.49(3) degrees, and Z = 1. Changes in metric features across the series are slight but indicate increasing population of antibonding Fe(6)S(8) core orbitals upon reduction. Zero-field M?ssbauer spectra are consistent with this result, isomer shifts increasing by ca. 0.05 mm/s for each electron added, and indicate a delocalized electronic structure. Magnetic susceptibility measurements together with previously reported results established the ground states S = (3)/(2) (3+), 3 (2+), (7)/(2) (1+), 3 (0). The clusters [Fe(6)S(8)(PEt(3))(6)](n)()(+) possess the structural and electronic features requisite to multisequential electron transfer reactions. This work provides the first example of a cluster type isolated over four consecutive oxidation states. Note is also made of the significance of the [Fe(6)S(8)(PEt(3))(6)](n)()(+) cluster type in the development of iron-sulfur-phosphine cluster chemistry.     

Synthesis and structural characterisation of group 10 metal(II) gallyl complexes: analogies with platinum diboration catalysts?

Reactions of the anionic gallium(i) heterocycle, [:Ga{[N(Ar)C(H)](2)}](-) (Ar = C(6)H(3)Pr(i)(2)-2,6), with a variety of mono- and bidentate phosphine, tmeda and 1,5-cyclooctadiene (COD) complexes of group 10 metal dichlorides are reported. In most cases, salt elimination occurs, affording either mono(gallyl) complexes, trans-[MCl{Ga{[N(Ar)C(H)](2)}}(PEt(3))(2)] (M = Ni or Pd) and cis-[PtCl{Ga{[N(Ar)C(H)](2)}}(L)] (L = R(2)PCH(2)CH(2)PR(2), R = Ph (dppe) or cyclohexyl (dcpe)), or bis(gallyl) complexes, trans-[M{Ga{[N(Ar)C(H)](2)}}(2)(PEt(3))(2)] (M = Ni, Pd or Pt), cis-[Pt{Ga{[N(Ar)C(H)](2)}}(2)(PEt(3))(2)], cis-[M{Ga{[N(Ar)C(H)](2)}}(2)(L)] (M = Ni, Pd or Pt; L = dppe, Ph(2)CH(2)PPh(2) (dppm), tmeda or COD). The crystallographic and spectroscopic data for the complexes show that the trans-influence of the gallium(i) heterocycle lies in the series, B(OR)(2) > H(-) > PR(3) approximately [:Ga{[N(Ar)C(H)](2)}](-) > Cl(-). Comparisons between the reactivity of one complex, [Pt{Ga{[N(Ar)C(H)](2)}}(2)(dppe)], with that of closely related platinum bis(boryl) complexes indicate that the gallyl complex is not effective for the catalytic or stoichiometric gallylation of alkenes or alkynes. The phosphaalkyne, Bu(t)C[triple bond, length as m-dash]P, does, however, insert into one gallyl ligand of the complex, leading to the novel, crystallographically characterised P,N-gallyl complex, [Pt{Ga{[N(Ar)C(H)](2)}}{Ga{PC(Bu(t))C(H)[N(Ar)]C(H)N(Ar)}}(dppe)]. An investigation into the mechanism of this insertion reaction has been undertaken.     

One-electron versus two-electron mechanisms in the oxidative addition reactions of chloroalkanes to amido-bridged rhodium complexes

The compound syn-[{Rh(mu-NH{p-tolyl})(CNtBu)(2)}(2)] (1) oxidatively adds C--Cl bonds of alkyl chlorides (RCl) and dichloromethane to each metal centre to give the cationic complexes syn-[{Rh(mu-NH{p-tolyl})(eta(1)-R)(CNtBu)(2)}(2)(mu-Cl)]Cl and anti-[{Rh(mu-NH{p-tolyl})Cl(CNtBu)(2)}(2)(mu-CH(2))]. Reaction of 1 with the chiral alkyl chloride (-)-(S)-ClCH(Me)CO(2)Me (R*Cl) gave [{Rh(mu-NH{p-tolyl})(eta(1)-R*)(CNtBu)(2)}(2)(mu-Cl)]Cl ([3]Cl) as an equimolecular mixture of the meso form (R,S)-[3]Cl-C(s) and one enantiomer of the chiral form [3]Cl-C(2). This reaction, which takes place in two steps, was modeled step-by-step by reacting the mixed-ligand complex syn-[(cod)Rh(mu-NH{p-tolyl})(2)Rh(CNtBu)(2)] (4) with R*Cl, as a replica of the first step, to give [(cod)Rh(mu-NH{p-tolyl})(2)RhCl(eta(1)-R*)(CNtBu)(2)] (5) with racemization of the chiral carbon. Further treatment of 5 with CNtBu to give the intermediate [(CNtBu)(2)Rh(mu-NH{p-tolyl})(2)RhCl(eta(1)-R*)(CNtBu)(2)], followed by reaction with R*Cl reproduced the regioselectivity of the second step to give (R,S)-[3]Cl-C(s) and [3]Cl-C(2) in a 1:1 molar ratio. Support for an S(N)2 type of reaction with inversion of the configuration in the second step was obtained from a similar sequence of reactions of 4 with ClCH(2)CO(2)Me first, then with CNtBu, and finally with R*Cl to give [(CNtBu)(2)(eta(1)-CH(2)R)Rh(mu-NH{p-tolyl})(2)(mu-Cl)Rh(eta(1)-R*)(CNtBu)(2)]Cl (R = CO(2)Me, [7]Cl) as a single enantiomer with the R configuration at the chiral carbon. The reactions of 1 with (+)-(S)-XCH(2)CH(CH(3))CH(2)CH(3) (X = Br, I) gave the related complexes [{Rh(mu-NH{p-tolyl})(eta(1)-CH(2)CH(CH(3))CH(2)CH(3))(CNtBu)(2)}(2)(mu-X)]X, probably by following an S(N)2 profile in both steps.     

Heteroligated metallomacrocycles generated via the weak-link approach

Sequential reaction of two different hemilabile ligands (Ph(2)PCH(2)CH(2)X)(2)Ar (X = S, Ar = C(6)H(4) or C(6)(CH(3))(4); X = NCH(3), Ar = C(6)H(4); X = O, Ar = 9,10-C(14)H(8)) with a Rh(I) metal center resulted in the formation of heteroligated metallomacrocycles in high yield. The specific reaction conditions for each pair of hemilabile ligands are discussed. The solid-state structure of [[1,4-(Ph(2)PCH(2)CH(2)S)(2)C(6)H(4)]-[1,4-(Ph(2)PCH(2)CH(2)S)(2)C(6)(CH(3))(4)]Rh(2)](BF(4))(2), as determined by X-ray crystallography, is presented.     

C-F Bond activation at Ni(0) and simple reactions of square planar Ni(II) fluoride complexes

The reaction of Ni(COD)(2)(COD = 1,5-cyclooctadiene) with triethylphosphine and pentafluoropyridine in hexane has been shown previously to yield trans-[NiF(2-C(5)NF(4))(PEt(3))(2)](1a) with a preference for reaction at the 2-position of the heteroaromatic. The corresponding reaction with 2,3,5,6-tetrafluoropyridine was shown to yield trans-[NiF(2-C(5)NF(3)H)(PEt(3))(2)](1b). In this paper, we show that reaction of Ni(COD)(2) with triethylphosphine and pentafluoropyridine in THF yields a mixture of 1a and 1b. Competition reactions of Ni(COD)(2) with triethylphosphine in the presence of mixtures of heteroaromatics in hexane reveal a kinetic preference of k(pentafluoropyridine):k(2,3,5,6-tetrafluoropyridine)= 5.4:1. Treatment of 1a and 1b with Me(3)SiN(3) affords trans-[Ni(N(3))(2-C(5)NF(4))(PEt(3))(2)](2a) and trans-[Ni(N(3))(2-C(5)NHF(3))(PEt(3))(2)](2b), respectively. The complex trans-[Ni(NCO)(2-C(5)NHF(3))(PEt(3))(2)](3b) is obtained on reaction of with Me(3)SiNCO and by photolysis of under CO, while trans-[Ni(eta(1)-C [triple bond CPh)(2-C(5)NF(4))(PEt(3))(2)](4a) is obtained by reaction of phenylacetylene with 1a. Addition of KCN, KI and NaOAc to complex 1a affords trans-[Ni(X)(2-C(5)NF(4))(PEt(3))(2)](5a X = CN, 6a X = I, 7a X = OAc), respectively. The PEt(3) groups of complex are readily replaced by addition of 1,2-bis(dicyclohexylphosphino)ethane (dcpe) to produce [NiF(2-C(5)F(4)N)(dcpe)](8a). Addition of dcpe to trans-[Ni(OTf)(2-C(5)F(4)N)(PEt(3))(2)](10a), however, yields the salt [Ni(2-C(5)F(4)N)(dcpe)(PEt(3))](OTf)(9a) by substitution of only one PEt(3) and displacement of the triflate ligand. The structures of 2b, 4a, 7a and 8a were determined by X-ray crystallography. The influence of different ancillary ligands on the bond lengths and angles of square-planar nickel structures with polyfluoropyridyl ligands is analysed.     

Scope and mechanism of the intermolecular addition of aromatic aldehydes to olefins catalyzed by Rh(I) olefin complexes

Rhodium (I) bis-olefin complexes Cp*Rh(VTMS)(2) and CpRh(VTMS)(2) (Cp* = C(5)Me(5), Cp = C(5)Me(4)CF(3), VTMS = vinyl trimethylsilane) were found to catalyze the addition of aromatic aldehydes to olefins to form ketones. Use of the more electron-deficient catalyst CpRh(VTMS)(2) results in faster reaction rates, better selectivity for linear ketone products from alpha-olefins, and broader reaction scope. NMR studies of the hydroacylation of vinyltrimethylsilane showed that the starting Rh(I) bis-olefin complexes and the corresponding Cp*/Rh(CH(2)CH(2)SiMe(3))(CO)(Ar) complexes were catalyst resting states, with an equilibrium established between them prior to turnover. Mechanistic studies suggested that CpRh(VTMS)(2) displayed a faster turnover frequency (relative to Cp*Rh(VTMS)(2)) because of an increase in the rate of reductive elimination, the turnover-limiting step, from the more electron-deficient metal center of CpRh(VTMS)(2). Reaction of Cp*/Rh(CH(2)CH(2)SiMe(3))(CO)(Ar) with PMe(3) yields acyl complexes Cp*/Rh[C(O)CH(2)CH(2)SiMe(3)](PMe(3))(Ar); measured first-order rates of reductive elimination of ketone from these Rh(III) complexes established that the Cp ligand accelerates this process relative to the Cp* ligand.     

Platinum and palladium imido and oxo complexes with small natural bite angle diphosphine ligands

Treatment of L(2)MCl(2) (M = Pt, Pd; L(2) = Ph(2)PCMe(2)PPh(2) (dppip), Ph(2)PNMePPh(2) (dppma)) with AgX (X = OTf, BF(4), NO(3)) in wet CH(2)Cl(2) yields the dinuclear dihydroxo complexes [L(2)M(mu-OH)](2)(X)(2), the mononuclear aqua complexes [L(2)M(OH(2))(2)](X)(2), the mononuclear anion complexes L(2)MX(2), or mixtures of complexes. Addition of aromatic amines to these complexes or mixtures gives the dinuclear diamido complexes [L(2)Pt(mu-NHAr)](2)(BF(4))(2), the mononuclear amine complexes [L(2)M(NH(2)Ar)(2)](X)(2), or the dinuclear amido-hydroxo complex [Pt(2)(mu-OH)(mu-NHAr)(dppip)(2)](BF(4))(2). Deprotonation of the Pd and Pt amine or diamido complexes with M'N(SiMe(3))(2) (M' = Li, Na, K) gives the diimido complexes [L(2)M(mu-NAr)](2) associated with M' salts. Structural studies of the Li derivatives indicate association through coordination of the imido nitrogen atoms to Li(+). Deprotonation of the amido-hydroxo complex gives the imido-oxo complex [Pt(2)(mu-O)(mu-NAr)(dppip)(2)].LiBF(4).LiN(SiMe(3))(2), and deprotonation of the dppip Pt hydroxo complex gives the dioxo complex [Pt(mu-O)(dppip)](2).LiN(SiMe(3))(2).2LiBF(4).     

Preparation of a family of hexanuclear rhenium cluster complexes containing 5-(phenyl)tetrazol-2-yl ligands and alkylation of 5-substituted tetrazolate ligands

The preparation of two new families of hexanuclear rhenium cluster complexes containing benzonitrile and phenyl-substituted tetrazolate ligands is described. Specifically, we report the preparation of a series of cluster complexes with the formula [Re(6)Se(8)(PEt(3))(5)L](2+) where L = benzonitrile, p-aminobenzonitrile, p-methoxybenzonitrile, p-acetylbenzonitrile, or p-nitrobenzonitrile. All of these complexes undergo a [2 + 3] cycloaddition with N(3)(-) to generate the corresponding [Re(6)Se(8)(PEt(3))(5)(5-(p-X-phenyl)tetrazol-2-yl)](+) (or [Re(6)Se(8)(PEt(3))(5)(2,5-p-X-phenyltetrazolate)](+)) cluster complexes, where X = NH(2), OMe, H, COCH(3), or NO(2). Crystal structure data are reported for three compounds: [Re(6)Se(8)(PEt(3))(5)(p-acetylbenzonitrile)](BF(4))(2)?MeCN, [Re(6)Se(8)(PEt(3))(5)(2,5-phenyltetrazolate)](BF(4))?CH(2)Cl(2), and [Re(6)Se(8)(PEt(3))(5)(2,5-p-aminophenyltetrazolate)](BF(4)). Treatment of [Re(6)Se(8)(PEt(3))(5)(2,5-phenyltetrazolate)](BF(4)) with HBF(4) in CD(3)CN at 100 °C leads to protonation of the tetrazolate ring and formation of [Re(6)Se(8)(PEt(3))(5)(CD(3)CN)](2+). Surprisingly, alkylation of the phenyl and methyl tetrazolate complexes ([Re(6)Se(8)(PEt(3))(5)(2,5-N(4)CPh)](BF(4)) and [Re(6)Se(8)(PEt(3))(5)(1,5-N(4)CMe)](BF(4))) with methyl iodide and benzyl bromide, leads to the formation of mixtures of 1,5- and 2,5-disubstituted tetrazoles.