Selective flotation-spectrophotometric determination of trace copper(II) in natural waters, human blood and drug samples using phenanthraquinone monophenylthiosemicarbazone.

Copper(II) forms 1:1 and 1:2 intense red complexes with phenanthraquinone monophenylthiosemicarbazone (PPT) at pH 3-3.5 and > or =6.5, respectively. These complexes exhibit maximal absorbance at 545 and 517 nm, the molar absorptivity being 2.3 x 10(4) and 4.8 x 10(4) l mol(-1) cm(-1), respectively. However, the 1:1 complex was quantitatively floated with oleic acid (HOL) surfactant in the pH range 4.5-5.5, providing a highly selective and sensitive procedure for the spectrophotometric determination of CuII. The molar absorptivity of the floated Cu-PPT complex was 1.5 x 10(5) l mol)(-1) cm(-1). Beer's law was obeyed over the range 3-400 ppb at 545 nm. The analytical parameters affecting the flotation process and hence the determination of copper traces were reported. Also, the structure of the isolated solid complex and the mechanism of flotation were suggested. Moreover, the procedure was successfully applied to the analysis of CuII in natural waters, serum blood and some drug samples.     

Flotation separation and electrothermal atomic absorption spectrometric determination of thallium in wastewater samples

The proposed method is a simple process for the determination of trace amount of thallium(I) in the environmental wastewater samples by electrothermal atomic absorption spectrometry. The wastewater samples were obtained from the environment of a cement plant and subjected to a simple treatment, such as adjusting pH and masking the interfering ions, to prepare for the flotation process in which the thallium(I) content was floated as an ion-association complex using iodide and Rhodamine B at the interface of aqueous/cyclohexane layers. The floated layer was then separated and dissolved in 2 ml of a solution, which was 1% to H2SO4 and 50% to methanol, respectively. Aliquots of 10-microl of this solution were subjected to the graphite furnace to determine the thallium(I) content. The flotation process can be carried in a weak acidic medium in which the interfering effects owing to certain metal ions were eliminated by masking them as neutral citrate chelates. The dynamic range for the determination was found to be 1.0 x 10(-8) - 1.0 x 10(-7) mol l(-1). The RSD was 3.2% and the DL was 2.5 x 10(-9) mol l(-1) (calculated as 3SD of the blank). The reliability of the method is demonstrated by the analysis of a synthetic wastewater in which the recovery was found to be 94%.     

Spectrophotometric and atomic absorption determination of Ni(II) in fresh and sea waters after preconcentration by flotation

A highly selective and sensitive procedure for flotation separation followed by spectrophotometric determination, confirmed by AAS, of Ni(II) traces is proposed. The maximum flotation separation (100%) is achieved at approximately 25 degrees C in the pH range of 1-3 using sodium diethyldithiocarbamate (as a collector) and oleic acid surfactant. The floated (1 : 2) colored complex is measured spectrophotometrically at 430 nm over a concentration range of 0.5-4.0 microg/g with a molar absorptivity of 0.44 x 10(4) L mol(-1) cm(-1). The procedure was successfully applied for the separation and determination of Ni(II) in fresh and sea waters.     

Ion flotation behaviour of thirty-one metal ions in mixed hydrochloric/nitric acid solutions

The ion flotation of 31 metal ions in hydrochloric/nitric acid solution with the cationic surfactant cetylpyridinium chloride was investigated. A 25-ml portion of 0.27-2.87 x 10(-4)M metal ion and 1.8-6.0 x 10(-4)M cetylpyridinium chloride solution in 0.17-3.4M acid mixture ([HCl]:[HNO(3)] = 2.4:1) was subjected to flotation in a cell, 22.5 cm high and 4.0 cm in diameter, for 5 min, with nitrogen bubbles. Ir(IV), Pt(IV), Ge(IV), Sn(IV), Bi(III), Au(III), Tl(III), Pd(II) and Sn(II) were floated from solution in 95-100% yield; Ru(III), Rh(III), Ir(III), Hg(II), Ag(I) and Tl(I) were partly floated, while Cr(VI), Ti(IV), Zr(IV), Ga(III), In(III), Fe(III), Sb(III), Al(III), Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II), CD(II) and Pb(II) were floated with less than 20% yield. The flotation behaviour of these metal ions in the mixed acid system was compared with that in hydrochloric acid. The flotation is more efficient in the mixed acid system.     

Separation via flotation, spectrophotometric speciation, and determination of vanadium(IV) in wastes of power stations.

1-(2-Hydroxy-4-methoxybenzophenone)-4-phenylthiosemicarbazone (HMBPT) was investigated as a new reagent for the flotation of vanadium(IV). At pH approximately 1.5, vanadium(IV) forms a 1:1 pale-violet complex with HMBPT in aqueous solution. An intense clear violet layer was formed after flotation, by adding an oleic acid (HOL) surfactant. The composition of the float was 1:1 [V(IV)]:[HMBPT]. A highly selective and sensitive spectrophotometric procedure was proposed for the determination of microamounts of V(IV) as its floated complex. The molar absorptivities of the V(IV)-HMBPT and V(IV)-HMBPT-HOL systems were 0.4 x 10(4) and 0.12 x 10(5) L mol(-1) cm(-1) at 560 nm, respectively. The formation constants of the species formed in the presence and absence of HOL were 4.6 x 10(7) and 8.7 x 10(5) L mol(-1), respectively. Beer's law was obeyed up to 1 x 10(-4) mol L(-1) in the aqueous layer as well as in the oleic acid layer. The HMBPT-V(IV) complexes formed in the aqueous solution and scum layer were characterized by elemental analysis, infrared and UV spectrophotometric studies. The mode of chelation between V(IV) and HMBPT is proposed to be due to a reaction between the protonated bidentate HMBPT ligand and V(IV) through the S=C and N=C groups. Interferences from various foreign ions were avoided by adding excess HMBPT and/or Na2S2O3 as a masking agent. The proposed flotation method was successfully applied to the analysis of V(IV) in synthetic mixtures, wastes of power stations, simulated samples and in real ores. The separation mechanism is discussed.     

Separation and preconcentration of Ag(I) in aqueous samples by flotation as an ion-associate using iodide and ferroin followed the determination by flame atomic absorption spectrometry

A simple method for separation/preconcentration and determination of Ag(I) in aqueous samples is described. The method is based on formation of an ion-associate between Ag(I)-iodide complex and ferroin, which can be floated at the interface of the aqueous/n-heptane phases. The flotation process was carried out using 500-ml aliquot of the aqueous solution and the floated layer was dissolved in 5 ml of 1 M HNO3 containing methanol (50% v/v) as the solvent. The Ag(I) content was then determined by flame atomic absorption spectrometry (FAAS). The method so could be considered as an enrichment process, was achieved to a quantitative feature, when the pH of the solution was adjusted to 4 and the concentrations of iodide and ferroin were about 3.2 x 10(-4) M and 6.25 x 10(-5) M, respectively. The LOD and RSD (n = 7) were obtained 1.0 x 10(-8) M and 2.4%, respectively. It was found that a large number of cations and anions even at high considerably foreign ion/Ag(I) ratios were not interfered. The method was applied satisfactorily to recovery of Ag(I) from different aqueous samples.     

Selective flotation-separation and spectrophotometric determination of cadmium using phenanthraquinone monophenythiosemicarbazone.

A simple, selective and sensitive procedure is described for the preconcentration by flotation followed by spectrophotometric determination of trace amounts of Cd(II). Cadmium forms an intense red 1:2 complex with phenanthraquinone monophenylthiosemicarbazone (PPT) at pH > or = 6. The colored Cd-PPT complex was floated quantitatively with oleic acid (HOL) surfactant at pH 6.5, exhibiting maximum absorbance at 520 nm and having a molar absorptivity of 2.4 x 10(5) L mol(-1) cm(-1). The stability constant of the formed complex is 1.5 x 10(12); log K = 12.2. Beer's law was obeyed over the concentration range 0.01-0.34 mg/L. The Sandell sensitivity and relative standard deviation are 0.4 ng/cm2 and 2.6%, respectively. The results obtained spectrophotometrically were compared to those obtained by AAS analysis. The analytical parameters affecting flotation and hence determination have been thoroughly investigated. The proposed procedure was successfully applied to the determination of Cd(II) traces in certified and real human hair samples as well as in natural waters. The structure of the complex formed and the mechanism of flotation were proposed.     

Flotation-spectrophotometric determination of mercury in water samples using iodide and ferroin.

This paper describes a simple and highly selective method for separation, preconcentration and spectrophotometric determination of trace amounts of mercury. The method is based on the flotation of an ion-associate of HgI4(2-) and ferroin between aqueous and n-heptane interface at pH 5. The ion-associate was then separated and dissolved in acetonitrile to measure its absorbance. Quantitative flotation of the ion-associate was achieved when the volume of the water sample containing Hg(II) was varied over 50 - 800 ml. Beer's law was obeyed over the concentration range of 3.2 x 10(-8) - 9.5 x 10(-7) mol l(-1) with an apparent molar absorptivity of 1 x 10(6) l mol(-1) cm(-1) for a 500 ml aliquot of the water sample. The detection limit (n = 25) was 6.2 x 10(-9) mol l(-1), and the RSD (n = 5) for 3.19 x 10(-7) mol l(-1) of Hg(II) was 1.9%. A notable advantage of the method is that the determination of Hg(II) is free from the interference of the almost all cations and anions found in the environmental and waste water samples. The determination of Hg(II) in tap, synthetic waste, and seawater samples was carried out by the present method and a well-established method of extraction with dithizone. The results were satisfactorily comparable so that the applicability of the proposed method was confirmed in encountering with real samples.     

A new selective chromogenic reagent for the spectrophotometric determination of thallium(I) and (III) and its separation using flotation and the solid-phase extraction on polyurethane foam.

A new sensitive chromogenic reagent, 9,10-phenanthaquinone monoethylthiosemicarbazone (PET), has been synthesized and used in the spectrophotometric determination of Tl(III). In HNO3, H2SO4 or H3PO4 acids, PET can react immediately at room temperature with Tl(III) to form a red 2:1 complex with a maximum absorption at 516 nm. The different analytical parameters affecting the extraction and determination processes have been examined. The calibration curve was found to be linear over the range 0.2-10 microg cm(-3) with a molar absorptivity of 2.2 x 10(4) dm3 mol(-1) cm(-1). Sandell's sensitivity was found to be 0.0093 microg cm(-2). No interference from macroamounts of foreign ions was detected, except for Pd(II). However, Pd(II) does not affect the determination process, because its complex with PET has its lambda(max) at 625 nm. The proposed method has been applied to the determination of Tl(I and III) in synthetic and natural samples after separation by flotation (in oleic acid/kerosene) and solid-phase extraction (on polyurethane foam) techniques. The two methods were found to be accurate and not subject to random error, but solid-phase extraction was preferred because it is cheap, simpler and there is no contamination risk coming from flotation reagents.     

Sensitive flotation-spectrophotometric determination of gold, based on the gold(I)-iodide-methylene blue system

The gold(I)-iodide-Methylene Blue (MB) system is suitable for flotation separation and spectrophotometric determination of gold. Under the optimum conditions [(MB(+))(AuI(2)(-))].3[(MB(+))(I(3)(-))] is formed, and floated with cyclohexane. The product is dissolved in methanol and its absorbance measured. The molar absorptivity is 3.4 x 10(5)1.mole(-1).cm(-1) at 655 nm. The proposed method is more than three times as sensitive as the Rhodamine B method. Pt, Pd, Ag and Hg interfere seriously, and Ir, Rh, Bi and Cd to a smaller extent. Preliminary separation of gold by precipitation with tellurium as a collector is recommended. The method has been applied to determination of gold traces (about 1 x 10(-4)%) in a copper sample.     

Carbon paste electrode for trace zirconium(IV) determination by adsorption voltammetry.

A very sensitive and selective procedure was developed for trace measurement of zirconium based on the cathodic adsorptive stripping voltammetry of the zirconium-alizarin red S(ARS) complex at a carbon paste electrode (CPE). The 2nd-order derivative linear scan voltammograms of the zirconium-ARS complex were recorded by a model JP-303 polarographic analyzer from 0.0 to -1.0 V (vs. SCE). Optimal analytical conditions were found to be: an acetic acid (0.1 mol l(-1))-potassium biphthalate (0.08 mol l(-1)) buffer solution (pH 4.8) containing 4.0 x 10-6 mol l(-1) ARS; accumulation potential, 0.0 V; accumulation time, 180 or 90 s; rest time, 10 s; scan rate, 250 mV s(-1). The results showed that the complex can be adsorbed on the surface of the CPE, yielding one peak at -0.51 V, corresponding to the reduction of ARS in the complex at the electrode. The detection limit was found to be 1.0 x 10(-10) mol l(-1) (S/N = 3) for 240 s accumulation. The linear range was 2.0 x 10(-10)-4.0 x 10(-7) mol l(-1). The developed method was applied to the determination of trace zirconium in the ore samples with satisfactory results.     

水中痕量土霉素的亲水溶剂浮选-分光光度测定

本文利用自制的浮选装置,选择四氢呋喃和无水乙醇(4+1)混合溶液作溶剂,氯化钠作分相剂,将Fe(Ⅲ)与土霉素(OTC)形成的疏水性缔合物浮选至有机相,然后采用分光光度法测定,方法线性线性范围为6.6×10~(-7)～3.4×10~(-5) mol/L;检出限为3.63×10~(-7) mol/L;平均回收率为99.95%;表观摩尔吸光系数ε=2.028×10~5 L·5moL~(-1)·5cm~(-1).该方法设备简单、测定快速、灵敏度高、分离物质易于提取和不产生二次污染,可用于环境水样中痕量土霉素的快速测定.     

Adsorption voltammetry of the scandium-alizarin red S complex onto a carbon paste electrode

For the first time, a new method is described for the determination of scandium based on the cathodic adsorptive stripping of the scandium-alizarin red S complex onto a carbon paste electrode. The second-order derivative linear scan voltammograms of the complex are recorded by use of model JP-303 polarographic analyzer from 0.0 to -1.0 V (versus SCE). Optimum conditions are found to be: an acetic acid (0.36 mol l(-1))-potassium biphthalate (0.064 mol l(-1)) buffer solution (pH 4.0) containing 2.0x10(-5) mol l(-1) alizarin red S, a preconcentration potential of 0.0 V, a preconcentration time of 60 s, a rest time of 10 s and a scan rate of 100 mV s(-1). The results show that the complex can be adsorbed on the surface of a carbon paste electrode, yielding one peak at -0.58 V, corresponding to the reduction of alizarin red S in the complex at the electrode. The detection limit is found to be 6.0x10(-10) mol l(-1) for 3 min of preconcentration time. The linear range is 1.0x10(-9) to 4.0x10(-7) mol l(-1). Application of the procedure to the determination of scandium in the ore samples gave good results.     

Flow injection spectrophotometric analysis of lead in human saliva for monitoring environmental pollution

A new highly sensitive, simple and low-cost methodology for the direct determination of Pb (II) with 2-(5-bromo-2-pyridylazo)-5-dimethylaminophenol in ethanolic medium has been developed. The absorption spectroscopy of the complex has been examined in detail, and the chemical variables affecting the sensitivity of procedure studied, optimized and applied to the determination of trace amounts of lead in human saliva. Under the optimal experimental conditions, a precision of 1.61x10(-4) mug cm(-2) was achieved, the molar absorptivity being (epsilon) 5.6x10(4) l mol(-1) cm(-1). An FI technique is proposed, and it is possible to determine trace levels of lead by injection into a steam buffered at pH 7.15, containing 70% ethanol: 30% Tris buffer 3.5x10(-3) mol l(-1) (pH=7.2), 1x10(-4) mol l(-1) 5-BrDMPAP. The FIA configuration allows the analysis of 45 samples per hour. The lower limit of detection (LOD) was 1x10(-7) mol l(-1). The calibration plot was linear at least within two orders of magnitude of lead concentration. The use of an HPLC pump for the FI analysis led to a substantial improvement in the analytical performance of the method, which clearly satisfies the typical requirements for control processes.     

Spectrophotometric and atomic absorption determination of Ni(II) in fresh and sea waters after preconcentration by flotation

A highly selective and sensitive procedure for flotation separation followed by spectrophotometric determination, confirmed by AAS, of Ni(II) traces is proposed. The maximum flotation separation (100%) is achieved at 25° C in the pH range of 1–3 using sodium diethyldithiocarbamate (as a collector) and oleic acid surfactant. The floated (1 : 2) colored complex is measured spectrophotometrically at 430 nm over a concentration range of 0.5–4.0 g/g with a molar absorptivity of 0.44 × 10⁴ L mol^–1 cm^–1. The procedure was successfully applied for the separation and determination of Ni(II) in fresh and sea waters.     

Spectrophotometric determination of thorium in standard samples and monazite sands based on the floated complex of thorium with N-hydroxy-N,N′-diphenylbenzamidine and thorin

A selective and sensitive spectrophotometric method for the determination of Th(IV) has been based on the reaction with thorin and subsequent extraction of the red-orange coloured complex with N-hydroxy-N,N'-diphenylbenzamidine (HDPBA) in benzene as floated complex at pH 2.2. The complex in ethanol exhibits a maximum absorbance at 495 nm, with a molar absorptivity of 6.0x10(4) l mol(-1) cm(-1), with a Sandell's sensitivity of 3.9x10(-3) microg cm(-2). The method follows Beer's law up to 3.0 microg Th(IV) ml(-1). None of the common cations and anions tested interfere. The detection limit of the method is 0.04 microg Th(IV) ml(-1), the RSD (n=10) is 1.4%. The method has been successfully employed for the determination of thorium in various standard and monazite samples.     

Electroregenerable anion-exchange resin with triiodide carbon paste electrode for the voltammetric determination of adrenaline

An electroregenerable carbon paste electrode modified with triiodide ions immobilized in an anion-exchange resin (Lewatit M500) is proposed for the determination of adrenaline in pharmaceutical products by differential-pulse voltammetry (DPV). Adrenaline was chemically converted into adrenochrome by the I3- ions at the electrode surface. The electrochemical reduction back to adrenaline was obtained at a potential of -0.16 V vs. Ag/AgCl (3 mol l(-1) KCl). A 20% decrease of the initial analytical signal was observed after 350-400 determinations; the carbon paste electrode was 100% electroregenerated at a fixed potential of +0.65 V vs. Ag/AgCl (3 mol l(-1) KCl) in 0.1 mol l(-1) KI solution for 20 min. The differential-pulse voltammograms were obtained by applying a sweep potential between 0.0 and -0.34 V, following the adrenochrome reduction at -0.16 V. Under the optimum conditions established, such as pH 6.0; scan rate 20 mV s(-1) and pulse amplitude 50 mV, the calibration curve was linear from 2.0 x 10(-5) to 3.1 x 10(-4) mol l(-1) adrenaline with a detection limit of 3.9 x 10(-6) mol l(-1). The recovery of adrenaline ranged from 99.8 to 103.1% and the RSD was 2.6% for the solution containing 1.0 x 10(-4) mol l(-1) adrenaline (n = 10). The results obtained for adrenaline in pharmaceutical samples using the proposed carbon paste electrode are in agreement with those obtained using a pharmacopoeial procedure at the 95% confidence level.     

Mutual Separation and Determination of Th(IV) and U(VI) Using Arsenazo III as a Dye Collector Reagent by Flotation‐Spectrophotometric Method

This paper reports a simple and highly selective method for the separation, preconcentration, and determination of trace amounts of thorium and uranium in some complex samples via staircase flotation. The method is based on the initial flotation of the Th(IV)‐arsenazo III complex in the presence of U(VI) from a solution of 5 mol dm^?3 HCl, then reduction of U(VI) to U(IV) and repetition of the flotation step. In both steps, the floated complex was dissolved in a 5‐mL portion of methanol and its absorbance was measured at 655 nm, spectrophotometrically. For a 30‐mL portion of the sample, Beer's law was obeyed over the concentration ranges of 3.40 × 10^?7to 3.06 × 10^?6 mol dm^?3 for Th(IV) and3.40 × 10^?7 to 3.40 × 10^?6 mol dm^?3 for U(IV) with the apparent molar absorptivity of 4.20 × 10⁵ dm³ mol^?1 cm^?1 and 3.59 × 10⁵ dm³ mol^?1 cm^?1, respectively. The RSDs (n = 7) corresponding to 1.7 × 10^?6 mol dm^?3 of Th(IV) and U(IV) were obtained as 1.7% and 1.87%. The detection limits (7 blanks) for both the metal ions were found to be 1.7 × 10^?7 mol dm^?3. The important benefit of the method is that the determinations are free from the interference of almost all cations and anions found in the complex matrixes, such as seawater samples. The proposed method was also applied to reference materials, and the determinations were shown to have good agreement with the certified values.     

Solvent sublation and spectrometric determination of iron(II) and total iron using 3-(2-pyridyl)-5,6-bis(4-phenylsulfonic acid)-1,2,4-triazine and tetrabutylammonium bromide.

Solvent sublation has been studied for the separation and determination of trace iron(II) in various kinds of water samples. A strongly magenta-colored anionic [Fe(FZ)3](4-) complex was formed at pH 5.0 upon adding 3-(2-pyridyl)-5,6-bis(4-phenylsulfonic acid)-1,2,4-triazine (ferrozine, FZ) to the sample solution. Tetrabutylammonium bromide (TBAB) was added in the solution to form the (TBA)4[Fe(FZ)3)] ion pair, and an oleic acid (HOL) surfactant was added. Then, the (TBA)4[Fe(FZ)3] ion pairs were floated by vigorous shaking in the flotation cell and extracted into methyl isobutyl ketone (MIBK) on the surface of the aqueous solution. The iron collected in the MIBK layer was measured directly by spectrophotometry and/or flame atomic-absorption spectrophotometry. Different experimental variables that may affect the sublation efficiency were thoroughly investigated. The molar absorptivity of the (TBA)4[Fe(FZ)3] ion pair was 2.8 x 10(4) l mol(-1) cm(-1) in the aqueous layer. Beer's law held up to 1.0 mg L(-1) Fe(II) in the aqueous as well as in the organic layers. The adopted solvent sublation method was successfully applied for the determination of Fe(II) in natural water samples with a preconcentration factor of 200. The application was extended to determine iron in pharmaceutical samples.     

硫酸铵-碘化钾-氯化十六烷基吡啶-水体系浮选分离镉的研究

研究了硫酸铵-碘化钾-氯化十六烷基吡啶-水体系浮选分离镉的行为及其与常见离子分离的条件。结果表明，控制pH5．0，在1．0g(NH4)2SO4存在下，Cd^2 可被碘化钾-氯化十六烷基吡啶-水体系浮选，而Zn^2 、Mn^2 、Fe^2 、Co^2 、Ni^2 、A1^3 等离子在该体系中不被浮选，可实现Cd^2 与这些离子的定量分离。对合成水样进行了浮选分离测定，结果满意。