Copolymerization behavior of titanium imidazolin‐2‐iminato complexes

Monocyclopentadienyl titanium imidazolin‐2‐iminato complexes [Cp′Ti(L)X₂] 1a (Cp′ = cyclopentadienyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide, X = Cl), 1b (X = CH₃); 2 (Cp′ = cyclopentadienyl, L = 1,3‐diisopropylimidazolin‐2‐imide, X = Cl); 3 (Cp′ = tert‐butylcyclopentadienyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide, X = Cl), upon activation with methylaluminoxane (MAO) were active for the polymerization of ethylene and propylene and the copolymerization of ethylene and 1‐hexene. Catalysts derived from imidazolin‐2‐iminato tropidinyl titanium complex 4 = [(Trop)Ti(L)Cl₂] (Trop = tropidinyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide) were much less active. Narrow polydispersities were observed for ethylene and propylene polymerization, but the copolymerization of ethylene/hexene led to bimodal molecular weight distributions. The productivity of catalysts derived from the dialkyl complex 1b activated with [Ph₃C][B(C₆F₅)₄] or B(C₆F₅)₃ were less active for ethylene/hexene copolymerization but yielded ethylene/hexene copolymers of narrower molecular weight distributions than those derived from 1a/MAO. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6064–6070, 2008     

13Carbon nuclear magnetic resonance of ethylene–propylene–1‐hexene terpolymers

We report the complete ¹³C NMR characterization of a series of ethylene–propylene–1‐hexene terpolymers obtained with the metallocenic system rac‐ethylene bis‐indenyl zirconium dichloride, with different comonomer ratios. A detailed study of ¹³C NMR chemical shifts, triad sequence distributions, monomer‐average sequence lengths, and reactivity ratios for these terpolymers is presented. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2474–2482, 2004     

Synthesis and characterization of a silyl substituted bis(indenyl) zirconium dichloride and comparison of its olefin polymerization behavior to a siloxy substituted analogue

The synthesis and characterization of rac‐[ethylenebis(1‐(tert‐butyldimethylsilyl)‐3‐indenyl)]zirconium dichloride ( 3 ) is reported. The silyl substituted 3 /MAO was compared to its siloxy substituted analogue ( 4 ) in ethylene homo‐ and in ethylene‐1‐hexene copolymerizations to elucidate the effect of the heteroatom on polymerization performance. The influence of monomer and cocatalyst concentration and the polymerization temperature was investigated. The oxygen between the indenyl ligand and the bulky tert‐butyldimethylsilyl group in the siloxy substituted 4 /MAO was found to have a positive influence on polymerization activity and copolymerization performance. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 127–133, 2001     

Synthesis and characterization of ethylene‐propylene‐1‐pentene terpolymers

Ethylene (E), propylene (P), and 1‐pentene (A) terpolymers differing in monomer composition ratio were produced, using the metallocenes rac‐ethylene bis(indenyl) zirconium dichloride/methylaluminoxane (rac‐Et(Ind)₂ZrCl₂/MAO), isopropyl bis(cyclopentadienyl)fluorenyl zirconium dichloride/methylaluminoxane (Me₂C(Cp)(Flu)ZrCl₂/MAO, and bis(cyclopentadienyl)zirconium dichloride, supported on silica impregnated with MAO (Cp₂ZrCl₂/MAO/SiO₂/MAO) as catalytic systems. The catalytic activities at 25 °C and normal pressure were compared. The best result was obtained with the first catalyst. A detailed study of ¹³C NMR chemical shifts, triad sequences distributions, monomer‐average sequence lengths, and reactivity ratios for the terpolymers is presented. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 947–957, 2008     

Copolymerization of propylene with 1‐octene catalyzed by rac‐Me2Si(2,4,6‐Me3‐Ind)2ZrCl2/methyl aluminoxane

The copolymerization of propylene with 1‐octene was carried out with rac‐dimethylsilylbis(2,4,6‐trimethylindenyl)zirconium dichloride as a catalyst activated by methylaluminoxane (MAO) and an MAO/triisobutylaluminum mixture. The copolymerization conditions, including the polymerization temperature, Al/Zr molar ratio, and 1‐octene concentration in the feed, significantly influenced the catalyst activity, 1‐octene incorporation, polymer molecular weight, and melting temperature. The addition of 1‐octene to the polymerization system caused a decrease in the activity, whereas the melting temperature and intrinsic viscosity of the polymer increased. The microstructure of the propylene–1‐octene copolymer was characterized by ¹³C NMR, and the reactivity ratios of the copolymerization were estimated from the dyad distribution of the monomer sequences. The amount of regioirregular structures arising from 2,1‐ and 1,3‐misinserted propylene decreased as the 1‐octene content increased. The influence of the propagation chain on the polymerization mechanism is proposed to be the main reason for the changes in the reactivity ratios and regioirregularity with the polymerization conditions. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4299–4307, 2000     

Ethylene/1‐hexene copolymerization with tetramethyldisiloxane‐bridged bis(indenyl) metallocenes

Ethylene/1‐hexene copolymerizations with disiloxane‐bridged metallocenes, rac‐ and meso‐1,1,3,3‐tetramethyldisiloxanediyl‐bis(1‐indenyl)zirconium dichloride (rac‐ 1 , meso‐ 1 ) activated by modified methylaluminoxane were performed to investigate the influence of conformational dynamics on comonomer selectivity. Although ¹H NOESY (nuclear Overhauser and exchange spectroscopy) analysis indicated that the most stable conformation for the meso isomer in solution was that in which both indenes project over the metal coordination site, this isomer showed higher 1‐hexene selectivity in copolymerization (r_e = 140 ± 30, r_h = 0.024 ± 0.004) than the rac isomer with only one indene over the coordination site (r_e = 240 ± 20, r_h = 0.005 ± 0.001). The meso isomer showed high 1‐hexene selectivity, a high product of reactivity ratios (r_er_h = 3.3 ± 0.5) and produced copolymers that could be separated into fractions with different ethylene content suggesting that the active species exhibited multisite behavior and populated conformations with different comonomer selectivities during the copolymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3323–3331, 2004     

Copolymerization of propylene with 1,3‐butadiene using isospecific zirconocene catalysts

Poly(propylene‐ran‐1,3‐butadiene) was synthesized using isospecific zirconocene catalysts and converted to telechelic isotactic polypropylene by metathesis degradation with ethylene. The copolymers obtained with isospecific C₂‐symmetric zirconocene catalysts activated with modified methylaluminoxane (MMAO) had 1,4‐inserted butadiene units ( 1,4‐BD ) and 1,2‐inserted units ( 1,2‐BD ) in the isotactic polypropylene chain. The selectivity of butadiene towards 1,4‐BD incorporation was high up to 95% using rac‐dimethylsilylbis(1‐indenyl)zirconium dichloride (Cat‐A)/MMAO. The molar ratio of propylene to butadiene in the feed regulated the number‐average molecular weight (M_n) and the butadiene contents of the polymer produced. Metathesis degradations of the copolymer with ethylene were conducted with a WCI₆/SnMe₄/propyl acetate catalyst system. The ¹H NMR spectra before and after the degradation indicated that the polymers degraded by ethylene had vinyl groups at both chain ends in high selectivity. The analysis of the chain scission products clarified the chain end structures of the poly(propylene‐ran‐1,3‐butadiene). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5731–5740, 2007     

High molar mass ethene/1‐olefin copolymers synthesized with acenaphthyl substituted metallocene catalysts

The influence of ligand structure on copolymerization properties of metallocene catalysts was elucidated with three C₁‐symmetric methylalumoxane (MAO) activated zirconocene dichlorides, ethylene(1‐(7, 9)‐diphenylcyclopenta‐[a]‐acenaphthadienyl‐2‐phenyl‐2‐cyclopentadienyl)ZrCl₂ ( 1 ), ethylene(1‐(7, 9)‐diphenylcyclopenta‐[a]‐acenaphthadienyl‐2‐phenyl‐2‐fluorenyl)ZrCl₂ ( 2 ), and ethylene(1‐(9)‐fluorenyl‐(R)1‐phenyl‐2‐(1‐indenyl)ZrCl2 ( 3 ). Polyethenes produced with 1 /MAO had considerable, ca. 10% amount of trans‐vinylene end groups, resulting from the chain end isomerization prior to the chain termination. When ethene was copolymerized with 1‐hexene or 1‐hexadecene using 1 /MAO, molar mass of the copolymers varied from high to moderate (531–116 kg/mol) depending on the comonomer feed. At 50% comonomer feed, ethene/1‐olefin copolymers with high hexene or hexadecene content (around 10%) were achievable. In the series of catalysts, polyethenes with highest molar mass, up to 985 kg/mol, were obtained with sterically most crowded 2 /MAO, but the catalyst was only moderately active to copolymerize higher olefins. Catalyst 3 /MAO produced polyethenes with extremely small amounts of trans‐vinylene end groups and relatively low molar mass 1‐hexene copolymers (from 157 to 38 kg/mol) with similar comonomer content as 1 . These results indicate that the catalyst structure, which favors chain end isomerization, is also capable to produce high molar mass 1‐olefin copolymers with high comonomer content. In addition, an exceptionally strong synergetic effect of the comonomer on the polymerization activity was observed with catalyst 3 /MAO. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 373–382, 2008     

Zeolite‐supported metallocene catalyst for ethylene/1‐hexene copolymerization

Commercial zeolite acid mordenite was thermally treated for use as a support for bis(n‐butyl‐cyclopentadienyl)zirconium dichloride [(n‐BuCp)₂ZrCl₂] for the further evaluation of ethylene/1‐hexene copolymerization. The polymerization time, temperature, and solvent, as well as the addition of tri(isobutyl)aluminum in the hexane medium, were evaluated. The catalytic activity and 1‐hexene content in the copolymer synthesized with the supported system were very near those obtained with the homogeneous precursor. A comonomer effect was observed for both systems. The polymerization rate profiles were obtained for ethylene polymerization, and the activation energy and monomer reactivity were calculated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3038–3048, 2004     

C2‐symmetry dimethylated zirconocenes activated with triisobutyl aluminum as effective homogeneous catalysts for copolymerization of olefins

We investigated the catalytic performance of both bridged unsubstituted [rac‐EtInd₂ZrMe₂, rac‐Me₂SiInd₂ZrMe₂] and 2‐substituted [rac‐Et(2‐MeInd)₂ZrMe₂), rac‐Me₂Si(2‐MeInd)₂ZrMe₂] dimethylbisindenylzirconocenes activated with triisobutyl aluminum (TIBA) as a single activator in (a) homopolymerizations of ethylene and propylene, (b) copolymerization of ethylene with propylene and hexene‐1, and (c) copolymerization of propylene with hexene‐1 (at Al_TIBA/Zr = 100‐300 mol/mol). Unsubstituted catalysts were inactive in homopolymerizations of ethylene and propylene and copolymerization of propylene with hexene‐1 but exhibited high activity in copolymerizations of ethylene with propylene and hexene‐1. 2‐Substituted zirconocenes activated with TIBA were active in homopolymerizations of ethylene and propylene and exhibited high activity in copolymerization of ethylene with propylene and hexene‐1, and in copolymerization of propylene with hexene‐1. Comparative microstructural analysis of ethylene‐propylene copolymers prepared over rac‐Me₂SiInd₂ZrMe₂ activated with TIBA or Me₂NHPhB(C₆F₅)₄ has shown that the copolymers formed upon activation with TIBA are statistical in nature with some tendency to alternation, whereas those with borate activated system show a tendency to formation of comonomer blocks. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2934–2941, 2010     

New Curable Propylene Copolymers Containing Tert‐Butoxysilane Side Groups

In this work, new, crosslinkable copolymers from propylene and di‐tert‐butoxy(methyl)(oct‐7‐enyl)silane are presented. The silane‐functionalized monomer is obtained by hydrosilylation of 1,7‐octadiene with dichloromethylsilane, followed by the substitution of the chloro atoms by tert‐butoxy groups. Homopolymerization and copolymerization with propylene are performed using rac‐[ethylenebis(indenyl)]zirconium dichloride. The tert‐butoxysilane groups are easily cleaved by acid‐catalyzed processes. The resulting copolymer can be completely crosslinked via the tert‐butoxysilane functionality to obtain insoluble polymeric material and the gel content of the polymers with different silane content is determined. This method allows control of the copolymer composition and thus of the subsequent extent of crosslinking.     

Copolymerization of ethylene with 1‐hexene over metallocene catalyst supported on complex of magnesium chloride with tetrahydrofuran

The study of ethylene/1‐hexene copolymerization with the zirconocene catalyst, bis(cyclopentadienyl)zirconium dichloride (Cp₂ZrCl₂)/methylaluminoxane (MAO), anchored on a MgCl₂(THF)₂ support was carried out. The influence of 1‐hexene concentration in the feed on catalyst productivity and comonomer reactivity as well as other properties was investigated. Additionally, the effect of support modification by the organoaluminum compounds [(MAO, trimethlaluminum (AlMe₃), or diethylaluminum chloride (Et₂AlCl)] on the behavior of the MgCl₂(THF)₂/Cp₂ZrCl₂/MAO catalyst in the copolymerization process and on the properties of the copolymers was explored. Immobilization of the Cp₂ZrCl₂ compound on the complex magnesium support MgCl₂(THF)₂ resulted in an effective system for the copolymerization of ethylene with 1‐hexene. The modification of the support as well as the kind of organoaluminum compound used as a modifier influenced the activity of the examined catalyst system. Additionally, the profitable influence of immobilization of the homogeneous catalyst as well as modification of the support applied on the molecular weight and molecular weight distribution of the copolymers was established. Finally, with the successive self‐nucleation/annealing procedure, the copolymers obtained over both homogeneous and heterogeneous metallocene catalysts were heterogeneous with respect to their chemical composition. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2512–2519, 2004     

Ethylene/1‐hexene copolymers synthesized with a single‐site catalyst: Crystallization analysis fractionation,modeling, and reactivity ratio estimation

A series of poly(ethylene‐co‐1‐hexene) samples made with rac‐ethylene bis(indenyl)zirconium dichloride/methylaluminoxane were analyzed by crystallization analysis fractionation (CRYSTAF). The nine samples had comonomer contents of 0–4.2 mol % 1‐hexene with a narrow range of molecular weights (34,000–39,000 g/mol). Because all the copolymer samples had narrow, unimodal chemical composition distributions, they were ideal as calibration standards for CRYSTAF. A linear calibration curve was constructed relating the peak crystallization temperature from CRYSTAF operated at a cooling rate of 0.1 °C/min and the comonomer content as determined by ¹³C NMR. Reactivity ratios for ethylene and 1‐hexene were estimated by the fitting of reactant liquid‐phase compositional data to the Mayo–Lewis equation. It was found that a value of the 1‐hexene reactivity ratio could not be unequivocally determined from the set of samples analyzed because the range of comonomer incorporation was too narrow. Stockmayer's bivariate distribution was used to model the fractionation process in CRYSTAF, and although a good fit to experimental CRYSTAF profiles was attained, the model did not fully describe the underlying crystallization phenomena. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2595–2611, 2002     

Living syndiospecific polymerization of propylene promoted by C1‐symmetric titanium complexes activated by dried MAO

A series of C₁‐symmetric titanium complexes with both salicylaldiminato and β‐enaminoketonato as the ligands have been synthesized and investigated as the catalysts for propylene polymerization. In the presence of dried methylaluminoxane (dMAO), the complex with bulky substituent tert‐butyl ortho to alkyl oxygen can promote living polymerization of propylene with improved catalytic activity at ambient temperature, producing high molecular weight syndiotactic polypropylenes (rrrr 90.2%) with narrow molecular weight distributions (M_w/M_n = 1.07–1.22), via a propagation of 1,2‐insertion of monomer and chain‐end control of stereoselectivity. The propagation of polymer chain is completely different from that mediated by FI catalysts (the titanium complexes with phenoxy‐imine chelate ligands) which favor 2,1‐insertion of monomer. The interaction between a fluorine and a β‐hydrogen of a growing polymer chain, negligible chain transfer to monomer and dMAO without any free AlMe₃ were responsible for the achievement of living propylene polymerization. The substituent ortho to alkyl oxygen determined the stereo structure of the resultant polypropylene. In the case of less steric congested complexes with two nonequivalent coordination positions, the growing polymer chain might swing back to the favorite coordination position (site‐epimerization), forming m dyads regioirregular units. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Copolymerization of ethylene with 1‐hexene promoted by novel multi‐chelated non‐metallocene complexes with imine bridged imidazole ligand

A series of novel bridged multi‐chelated non‐metallocene catalysts is synthesized by the treatment of N,N‐imidazole, N,N‐dimethylimidazole, and N,N‐benzimidazole with n‐BuLi, 2,6‐dimethylaniline, and MCl₄ (M = Ti, Zr) in THF. These catalysts are used for copolymerization of ethylene with 1‐hexene after activated by methylaluminoxane (MAO). The effects of polymerization temperature, Al/M molar ratio, and pressure of monomer on ethylene copolymerization behaviors are investigated in detail. These results reveal that these catalysts are favorable for copolymerization of ethylene with 1‐hexene featured high catalytic activity and high comonomer incorporation. The copolymer is characterized by ¹³C NMR, WAXD, GPC, and DSC. The results confirm that the obtained copolymer features broad molecular weight distribution (MWD) about 33–35 and high 1‐hexene incorporation up to 9.2 mol %, melting temperature of the copolymer depends on the content of 1‐hexene incorporation within the copolymer chain and 1‐hexene unit in the copolymer chain isolates by ethylene units. The homopolymer of ethylene has broader MWD with 42–46. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 417–424, 2010     

Homopolymerizations and random copolymerizations of olefins with amino‐substituted cyclopentadienylchromium complexes

1‐(2‐N,N‐Dimethylaminoethyl)‐2,3,4,5‐tetramethylcyclopentadienyl‐chromium dichloride ( 1 ), (2‐N,N‐dimethylaminoethyl)cyclopentadienylchromium dichloride ( 6 ), and (2‐N,N‐dimethylaminoethyl)indenylchromium dichloride ( 7 ) in the presence of modified methylaluminoxane exhibit high catalytic activities for the polymerization of ethylene with random copolymerizations of ethylene with propylene, ethylene with 1‐hexene, and propylene with 1‐hexene. These initiators conduct polymerizations to give high molecular weight polymers with low polydispersities. However, the stereoregularities are very poor in these reactions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2759–2771, 2002     

High‐temperature ethylene/α‐olefin copolymerization with a zirconocene catalyst: Effects of the zirconocene ligand and polymerization conditions on copolymerization behavior

Copolymerizations of ethylene and α‐olefin with various zirconocene compounds at a high temperature were carried out to study the relationship between the ligand structure of zirconocene compounds and the copolymerization behavior. All of the indenyl‐based zirconocene compounds in combination with dimethylanilinium tetrakis(pentafluorophenyl)borate/triisobutylaluminum produced only low molecular weight copolymers at a high temperature, regardless of the substituents and bridged structures of the zirconocene compounds. However, zirconocene compounds with a fluorenyl ligand gave rise to a significant increase in the activity and molecular weight of the copolymers by the selection of a diphenylmethylene bridge structure even at a high temperature. Ethylene/1‐hexene copolymers obtained with the fluorenyl‐based catalysts contained inner double bonds accompanied by the generation of hydrogen, presumably because of a C H bond activation mechanism. The contents of the inner double bonds were significantly influenced by the polymerization conditions, including the 1‐hexene feed content, polymerization temperature, and ethylene pressure. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4641–4648, 2000     

Synthesis of ethylene‐1‐hexene copolymers from ethylene stock by tandem action of bis(2‐dodecylsulfanyl‐ethyl) amine‐CrCl3 and Et(Ind)2ZrCl2

In this work, ethylene‐1‐hexene copolymers were synthesized with a tandem catalysis system that consisted of a new trimerization catalyst bis(2‐dodecylsulfanyl‐ethyl) amine‐CrCl₃/MAO ( 1 /MAO) and copolymerization catalyst Et(Ind)₂ZrCl₂/MAO ( 2 /MAO) at atmosphere pressure. Catalyst 1 trimerized ethylene with high activity and excellent selectivity in the presence of a relatively low amount of MAO. Catalyst 2 incorporated the 1‐hexene content and produced ethylene‐1‐hexene copolymer from an ethylene‐only stock in the same reactor. Adjusting the Cr/Zr ratio and reaction temperature yielded various branching densities and thus melting temperatures. However, broad DSC curves were observed when low temperatures and/or high Cr/Zr ratios were employed due to an accumulation of 1‐hexene component and composition drifting during the copolymerization. It was found that a short pretrimerization period resulted in more homogeneous materials that gave unimodal DSC curves. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3562–3569, 2007     

Copolymerization of 3‐buten‐1‐ol and propylene with an isospecific zirconocene/methylaluminoxane catalyst

The copolymerization of propylene and 3‐buten‐1‐ol protected with alkylaluminum [trimethylaluminum (TMA) or triisobutylaluminum] was conducted with an isospecific zirconocene catalyst [rac‐dimethylsilylbis(1‐indenyl)zirconium dichloride], combined with methylaluminoxane as a cocatalyst, in the presence of additional TMA or H₂ as the chain‐transfer reagent if necessary. The results indicated that end‐hydroxylated polypropylene was obtained in the presence of the chain‐transfer reagents because of the formation of dormant species after the insertion of the 3‐buten‐1‐ol‐based monomer followed by chain‐transfer reactions. The selectivity of the chain‐transfer reactions was influenced by the alkylaluminum protecting the comonomer and the catalyst structure. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5600–5607, 2004     

Shape and diffusion of the monomer‐controlled copolymerization of ethylene and α‐olefins over Cp2ZrCl2 confined in the nanospace of the supercage of NaY

Cp₂ZrCl₂ confined inside the supercage of NaY zeolites [NaY/methylaluminoxane (MAO)/Cp₂ZrCl₂] exhibited the shape and diffusion of a monomer‐controlled copolymerization mechanism that strongly depended on the molecular structure of the monomer and its size. For the ethylene–propylene copolymerization, NaY/MAO/Cp₂ZrCl₂ showed the effect of the comonomer on the increase in the polymerization rate in the presence of propylene, whereas the ethylene/1‐hexene copolymerization showed little comonomer effect, and the ethylene/1‐octene copolymerization instead showed a comonomer depression effect on the polymerization rate. Isobutylene, having a larger kinetic diameter, had little influence on the copolymerization behaviors with NaY/MAO/Cp₂ZrCl₂ for the ethylene–isobutylene copolymerization, which showed evidence of the shape and diffusion of a monomer‐controlled mechanism. The content of the comonomer in the copolymer chain prepared with NaY/MAO/Cp₂ZrCl₂ decreased by about one‐half in comparison with that of Cp₂ZrCl₂. A differential scanning calorimetry study on the melting endotherms after the successive annealing of the copolymers showed that the copolymers of NaY/MAO/Cp₂ZrCl₂ had narrow comonomer distributions, whereas those of homogeneous Cp₂ZrCl₂ were broad. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2171–2179, 2003