Monodisperse polystyrene microspheres prepared by dispersion polymerization with microwave irradiation

Monodisperse polystyrene microspheres with diameters of 200–500 nm were prepared by dispersion polymerization with microwave irradiation with poly(N‐vinylpyrrolidone) as a steric stabilizer and 2,2′‐azobisisobutyronitrile as a radical initiator in an ethanol/water medium. The morphology, size, and size distribution of the polystyrene microspheres were characterized with transmission electron microscopy and photon correlation spectroscopy, and the formed films of the polystyrene dispersions were characterized with atomic force microscopy. The effects of the monomer concentration, stabilizer concentration, and initiator concentration on the size and size distribution of the polystyrene microspheres were investigated. The polystyrene microspheres prepared by dispersion polymerization with microwave irradiation were smaller, more uniform, and steadier than those obtained with conventional heating. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2368‐2376, 2005     

Synthesis and characterization of star polyfluorenes with a C60 core

C60‐cored star polyfluorenes were synthesized and fully characterized. A high yield (81%) hexakisaddition of C60 was developed by using Prato reaction and bulky fluorene addends. Suzuki polycondensation of the hexakisadducts of C60 carrying six 2‐bromofluorene addends and AB‐type monomer (2‐bromo‐9,9‐dioctylfluorenyl‐4,4,5,5‐tetramethyl‐ [1,3,2]‐dioxaborane) with Pd(PPh₃)₄ as the catalyst precursor afforded the desired C60‐cored star polyfluorenes. Their three‐dimensional structure can effectively reduce the aggregation of the polyfluorene chains. Annealing studies indicated that the C60‐cored star polyfluorenes are of good color stability. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4696–4706, 2007     

Nitroxide‐mediated homo‐ and block copolymerization of styrene and multifunctional acryl‐ and methacryl derivatives

The ability of different alkoxyamines ( I1 , I2 , I3 , I4 , and I5 ) to initiate controlled radical polymerization of styrene was evaluated. Among them, 2‐hydroxymethyl‐2‐[(2‐methyl‐1‐phenyl‐propyl)‐(1‐phenyl‐ethoxy)‐amino]‐propane‐1,3‐diol ( I5 ) gave the highest polymerization rate of styrene, and the best control over the molecular weight and the molecular weight distribution of polystyrene. Kinetic studies confirmed that with initiator I5 the polymerization of styrene proceeded in a controlled way. The controlled radical homopolymerization of multifunctional acryl‐ and methacryl derivatives using initiator I5 could not be realized as demonstrated by the high polydispersities (PD) obtained. However, it was possible to polymerize multifunctional acryl‐ and methacryl derivatives using a polystyrene macroinitiator ( Pst ) and, thus, novel amphiphilic block copolymers with a narrow molecular weight distribution were obtained. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1873–1882, 2005     

Polymerization of styrene with tetramethylthiuram disulfide as an initiator in the presence of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy

The bulk polymerization of styrene was investigated with tetramethylthiuram disulfide (TMTD) as an initiator in the presence of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) at 123 °C. The polymerization proceeded in a controlled/living way; that is, the polymerization rate was first‐order with respect to the monomer concentration, and the molecular weight increased linearly with conversion. The molecular weights of the polymers obtained were close to the theoretical values, and the molecular weight distributions were relatively low (weight‐average molecular weight/number‐average molecular weight = 1.1–1.3). The rate of polymerization with TMTD as an initiator was faster than that with benzoyl peroxide, and the rate was independent of the initial concentration of TMTD in the presence of TEMPO. The obtained polystyrene was functionalized with ultraviolet‐light‐sensitive ? SC(S)N(CH₃)₂ groups, which was characterized with ¹H NMR spectroscopy. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 543–551, 2005     

Properties of covalently bonded layered‐silicate/polystyrene nanocomposites synthesized via atom transfer radical polymerization

Covalently bonded layered silicated/polystyrene nanocomposites were synthesized via atom transfer radical polymerization in the presence of initiator‐modified layered silicate. The resulting nanocomposites had an intercalated and partially exfoliated structure, as confirmed by X‐ray diffraction and transmission electron microscopy. The thermal properties of the nanocomposites improved substantially over those of neat polystyrene. In particular, a maximum increase of 35.5 °C in the degradation temperature was displayed by these nanocomposites. Additionally, the surface elastic modulus and hardness of these nanocomposites were more than double those of pure polystyrene. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 534–542, 2005     

Atom transfer radical polymerization of styrene using the novel initiator ethyl 2‐N,N‐(diethylamino)dithiocarbamoyl‐butyrate

The atom transfer radical polymerizations (ATRPs) of styrene initiated by a novel initiator, ethyl 2‐N,N‐(diethylamino)dithiocarbamoyl‐butyrate (EDDCB), in both bulk and solution were successfully carried out in the presence of copper(I) bromide (CuBr) and N,N,N′,N″,N″‐pentamethyldiethylenetriamine at 115 °C. The polymerization rate was first‐order with respect to the monomer concentration, and the molecular weights of the obtained polymers increased linearly with the monomer conversions with very narrow molecular weight distributions (as low as 1.17) up to higher conversions in both bulk and solution. The polymerization rate was influenced by various solvents in different degrees in the order of cyclohexanone > dimethylformamide > toluene. The molecular weight distributions of the produced polymers in cyclohexanone were higher than those in dimethylformamide and toluene. The results of ¹H NMR analysis and chain extension confirmed that well‐defined polystyrene bearing a photo‐labile N,N‐(diethylamino)dithiocarbamoyl group was obtained via ATRP of styrene with EDDCB as an initiator. The polymerization mechanism for this novel initiation system is a common ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 32–41, 2006     

Synthesis,crystallization, and morphology of star‐shaped poly(ε‐caprolactone)

Six‐arm star‐shaped poly(ε‐caprolactone) (sPCL) was successfully synthesized via the ring‐opening polymerization of ε‐caprolactone with a commercial dipentaerythritol as the initiator and stannous octoate (SnOct₂) as the catalyst in bulk at 120 °C. The effects of the molar ratios of both the monomer to the initiator and the monomer to the catalyst on the molecular weight of the polymer were investigated in detail. The molecular weight of the polymer linearly increased with the molar ratio of the monomer to the initiator, and the molecular weight distribution was very low (weight‐average molecular weight/number‐average molecular weight = 1.05–1.24). However, the molar ratio of the monomer to the catalyst had no apparent influence on the molecular weight of the polymer. Differential scanning calorimetry analysis indicated that the maximal melting point, cold crystallization temperature, and degree of crystallinity of the sPCL polymers increased with increasing molecular weight, and crystallinities of different sizes and imperfect crystallization possibly did not exist in the sPCL polymers. Furthermore, polarized optical microscopy analysis indicated that the crystallization rate of the polymers was in the order of linear poly(ε‐caprolactone) (LPCL) > sPCL5 > sPCL1 (sPCL5 had a higher molecular weight than both sPCL1 and LPCL, which had similar molecular weights). Both LPCL and sPCL5 exhibited a good spherulitic morphology with apparent Maltese cross patterns, whereas sPCL1 showed a poor spherulitic morphology. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5449–5457, 2005     

Synthesis and characterization of micrometer‐sized homo and composite polyacrylonitrile particles of narrow size distribution on the basis of single‐step swelling of uniform polystyrene template microspheres

Polyacrylonitrile/polystyrene micrometer‐sized composite particles of narrow size distribution were prepared by a single‐step swelling of uniform polystyrene template microspheres with emulsion droplets of methylene chloride containing the monomer acrylonitrile and the initiator benzoyl peroxide. Methylene chloride was then evaporated carefully, followed by polymerization of acrylonitrile at 70 °C within the shrunken template particles. Polymerization of acrylonitrile also occurred at the particles' surface due to the interaction of surface polyacrylonitrile oligoradicals with acrylonitrile dissolved in the aqueous phase. Uniform polyacrylonitrile particles of higher surface area were formed by dissolving the template polystyrene polymer of the composite particles. Surface and bulk characterization of the particles were performed by methods such as FTIR, elemental analysis, TGA‐DSC, XRD, XPS, advancing contact angle, light microscope, SEM and cross‐sectional TEM. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4847–4861, 2004     

Synthesis and properties of fluorene‐based fluorinated polymers

Fluorene‐based polymers containing various fluorinated benzene (fluorobenzene, p‐difluorobenzene, and tetrafluorobenzene) moieties were synthesized. In addition, perfluorooctylation of poly‐[(9,9‐dioctylfluorene‐2,7‐diyl)‐co‐(fluorene‐2,7‐diyl)] was carried out to afford fluorene‐based polymers with perfluorooctyl moiety at the 9‐position on the fluorene ring. To evaluate the effect of fluorine moiety, polymers containing nonfluorinated benzene moieties and nonfluorinated octyl groups were synthesized. The photoluminescence measurements indicated that all these polymers exhibited blue emission in solution, but a polymer containing a perfluorooctyl group did not emit in the film state. Polymers containing various fluorinated benzene moieties showed higher fluorescence quantum yields and thermal stability than those containing nonfluorinated benzene. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3143–3150, 2001     

Ring‐opening metathesis polymerization of new norbornene‐based monomers containing various chromophores

Pure exo‐functional norbornene monomers containing various chromophores such as fluorene, pyrene, and carbazole were successfully prepared via the Diels–Alder reaction and condensation reaction. The living ring‐opening metathesis polymerization (ROMP) of a fluorene‐containing monomer, exo‐2‐(fluorene‐9‐ylcarboxymethyl)norborn‐5‐ene (exo‐1), was observed and confirmed by the formation of a diblock copolymer and a linear relationship between the number‐average molecular weight and [M]/[I] ratios ([M] = monomer concentration; [I] = initiator concentration). The synthesis and characteristics of novel fluorene‐containing polymers based on pure exo‐1 are reported with Grubbs catalyst I {RuCl₂(CHPh)[P(C₆H₁₁)₃]₂} with a high molecular weight of 3.18 × 10⁴ in 90 s ([M]/[I] = 100). However, the ROMP of pyrene‐ and carbazole‐containing monomers [exo‐5‐(pyrene methoxy carbonyl)bicyclo[2.2.1]hept‐2‐ene and exo‐5‐(carbazole ethoxy carbonyl)bicyclo[2.2.1]hept‐2‐ene, respectively] were carried out in a nonliving fashion. All the chromophore‐containing polymers showed excellent solubility in various organic solvents, particularly in chloroform, N‐methyl‐2‐pyrrolidinone, and 1,2‐dichlorobenzene. The glass transition temperatures of polynorbornenes containing various chromophores were determined to be 80–109 °C (by differential scanning calorimetry) higher than that of ring‐opened polynorbornene (glass transition temperature = 35 °C), indicating that the incorporation of the pendant aromatic moieties (e.g., fluorene, pyrene, and carbazole) could enhance the transition temperature for segmental motions of polymer chains. The photoluminescence spectra of all polymer solutions showed a strong emission in the blue region of the visible spectra. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3022–3031, 2007     

Densely grafting copolymers of ethyl cellulose through atom transfer radical polymerization

Densely grafting copolymers of ethyl cellulose with polystyrene and poly(methyl methacrylate) were synthesized through atom transfer radical polymerization (ATRP). First, the residual hydroxyl groups on the ethyl cellulose reacted with 2‐bromoisobutyrylbromide to yield 2‐bromoisobutyryloxy groups, known to be an efficient initiator for ATRP. Subsequently, the functional ethyl cellulose was used as a macroinitiator in the ATRP of methyl methacrylate and styrene in toluene in conjunction with CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a catalyst system. The molecular weight of the graft copolymers increased without any trace of the macroinitiator, and the polydispersity was narrow. The molecular weight of the side chains increased with the monomer conversion. A kinetic study indicated that the polymerization was first‐order. The morphology of the densely grafted copolymer in solution was characterized through laser light scattering. The individual densely grafted copolymer molecules were observed through atomic force microscopy, which confirmed the synthesis of the densely grafted copolymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4099–4108, 2005     

Less toxic acetylacetonates as initiators of trimethylene carbonate and 2,2‐dimethyltrimethylene carbonate ring opening polymerization

This article presents the results of TMC and DMC polymerization with the use of acetylacetonates of low‐toxic metals: iron, zinc, and zirconium. Zinc (II) acetylacetonate proves to be a very good initiator of homopolymerization. The reaction carried out with the use of this initiator at 110 °C is very rapid and of high yield. Using both zinc and iron (III) acetylacetonates, as well as the zirconium (IV) one, in high temperatures it is possible to obtain PTMC possessing high molecular mass, thus ensuring optimization of the relation between the duration of the polymerization and its yield. A strong influence of thermal degradation on the course of the reaction has been observed, particularly at 160 °C, with the use of Fe(acac)₃ as the initiator. DMC polymerization proceeds much more slowly when initiated by iron and zinc acetylacetonates. A high conversion of the monomer is obtained in this case as well. The relation between the molecular mass of the obtained PDMC and the conversion of the monomer is directly proportional; however, those masses, determined on the basis of polystyrene standards, are much lower than those estimated theoretically. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1913–1922, 2005     

Synthesis and characterization of micrometer‐sized particles of narrow size distribution with chloromethyl functionality on the basis of single‐step swelling of uniform polystyrene template microspheres

Polystyrene template microspheres of 1.4 ± 0.1 μm were prepared by dispersion polymerization of styrene in a mixture of ethanol and 2‐methoxy ethanol. These template particles were then swelled at room temperature in a single step with emulsion that was prepared in sodium dodecyl sulfate aqueous solution from a swelling solvent (dibutyl phthalate) containing the initiator (benzoyl peroxide) and monomer(s) (chlormethylstyrene, divinylbenzene, or ethylene dimethacrylate). Composite uniform particles composed of the template polystyrene and noncrosslinked or crosslinked polychloromethylstyrene were prepared by polymerizing the monomer(s) within the swelled particles at 73 °C. Crosslinked uniform polychloromethylstyrene particles of higher surface area were formed by dissolving the template polystyrene polymer of the composite particles. The influence of various reaction parameters, such as dibuthyl phthalate concentration, chloromethylstyrene concentration, crosslinker type and concentration, and so forth on the molecular weight, size, size distribution, shape, morphology, surface area, and decomposition temperature of the particles was investigated. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1342–1352, 2002     

Synthesis of well‐defined polymers end‐functionalized with crosslinkable aziridine groups by living anionic polymerization

Well‐defined end‐functionalized polystyrene, poly(α‐methylstyrene), and polyisoprene with polymerizable aziridine groups were synthesized by the termination reactions of the anionic living polymers of styrene, α‐methylstyrene, and isoprene with 1‐[2‐(4‐chlorobutoxy)ethyl]aziridine in tetrahydrofuran at ?78 °C. The resulting polymers possessed the predicted molecular weights and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight < 1.1) as well as aziridine terminal moieties. The cationic ring‐opening polymerization of the ω‐monofunctionalized polystyrene having an aziridinyl group with Et₃OBF₄ gave the polymacromonomer, whereas the α,ω‐difunctional polystyrene underwent crosslinking reactions to afford an insoluble gel. Crosslinking products were similarly obtained by the reaction of the α,ω‐diaziridinyl polystyrene with poly(acrylic acid)‐co‐poly(butyl acrylate). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4126–4135, 2005     

Atom transfer radical polymerization initiated by N‐bromosuccinimide

N‐Bromosuccinimide (NBS) was used as the initiator in the atom transfer radical polymerizations of styrene (St) and methyl methacrylate (MMA). The NBS/CuBr/bipyridine (bpy) system shows good controllability for both polymerizations and yields polymers with polydispersity indexes ranging from 1.18 to 1.25 for St and 1.14 to 1.41 for MMA, depending on the conditions used. The end‐group analysis of poly(MMA) and polystyrene indicated the polymerization is initiated by the succinimidyl radicals formed from the redox reaction of NBS with CuBr/bpy. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5811–5816, 2004     

Alternating copolymer of thiophene andN‐(phenylethynyl)pyrrole. New π‐conjugated alternating five‐membered ring copolymer and its packing structure

An alternating copolymer, Copoly‐1 , of thiophene and N‐(phenylethynyl)pyrrole was prepared by palladium‐catalyzed polycondensation. Powder X‐ray diffraction (XRD) analysis indicated that Copoly‐1 formed a stacked packing structure with doubly‐running polymer main chains. Optical data support the molecular and packing structures of Copoly‐1 . © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2219–2224, 2005     

Synthesis of well‐defined three‐armed polystyrene having thiourethane–isocyanurate as the core structure derived from trifunctional five‐membered cyclic dithiocarbonate

The synthesis of a three‐armed polymer with an isocyanurate–thiourethane core structure is described. Monofunctional reversible addition–fragmentation chain transfer (RAFT) agent 2 and trifunctional RAFT agent 5 were prepared from mercapto‐thiourethane and tris(mercapto‐thiourethane), which were obtained from the aminolysis of mono‐ and trifunctional five‐membered cyclic dithiocarbonates, respectively. The radical polymerization of styrene in the presence of 2,2′‐azobis(isobutyronitrile) and RAFT agent 2 in bulk at 60 °C proceeded in a controlled fashion to afford the corresponding polystyrene with desired molecular weights (number‐average molecular weight = 3000–10,100) and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight < 1.13). On the basis of the successful results with the monofunctional RAFT agents, three‐armed polystyrene with thiourethane–isocyanurate as the core structure could be obtained with trifunctional RAFT agent 5 in a similar manner. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5498–5505, 2005     

Polymeric nanocomposite comprising gold nanoparticles and bilaterally sulfur‐functionalized polystyrene

Anionic polymerization technique has been utilized to synthesize a bilaterally sulfur‐functionalized polystyrene, SCH3‐polystyrene‐SH. The synthesis scheme consists of (1) initiation of 4‐vinylbenzylmethyl sulfide with sec‐butyllithium to form a living sulfur‐containing initiator, (2) polymerization of styrene, and (3) termination of growing polystyrene chain with ethylene sulfide. The resulting bilaterally sulfur‐functionalized polystyrene is used to make polystyrene/gold nanoparticles (AuNPs) nanocomposite with AuNPs formed in situ in polymer solution through reduction of AuClO₄. The effects of the polymer/Au molar ratio as well as the molecular weight of polymer on the size and dispersion of formed AuNPs have been studied, and the superiority of bilaterally functionalized polymer to unilaterally functionalized polymer has been demonstrated. The polystyrene/AuNPs composite has been characterized by GPC, ¹H‐NMR, ¹³C‐NMR, EDS, TEM, UV‐Vis, and DSC. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1268–1277     

Synthesis and properties of highly refractive polyimides derived from fluorene‐bridged sulfur‐containing dianhydrides and diamines

Highly refractive and transparent polyimides (PIs) based on fluorene‐bridged and sulfur‐containing monomers have been developed. An aromatic dianhydride, 4,4′‐[p‐thiobis(phenylenesulfanyl)]diphthalic anhydride (3SDEA), was polymerized with several fluorene‐containing diamines, including commercially available 9,9′‐bis(p‐aminophenyl)fluorene (APF), 9,9′‐bis[4‐(p‐aminophenoxy)phenyl]fluorene (OAPF), and newly synthesized 9,9′‐bis[4‐(p‐aminophenyl)sulfanylphenyl]fluorene (ASPF) to afford series A PIs. Meanwhile, series B PIs were obtained from a new dianhydride, 4,4′‐[(9H‐fluorene‐9‐ylidene)bis(p‐phenylsulfanyl)]diphthalic anhydride (FPSP) and two aromatic diamines, ASPF and 4,4′‐thiobis[(p‐phenylenesulfanyl)aniline] (3SDA) via a two‐step polycondensation procedure. The PIs exhibit good thermal stabilities, such as relatively high glass transition temperatures in the range of 220–270 °C and high initial thermal decomposition temperatures (T_10%) exceeding 490 °C. The 9,9′‐disubstituted fluorene moieties endow the PI films with good optical transparency. The optical transmittances of the PI films at 450 nm are all higher than 80% for the thickness of about 10 μm. Furthermore, the highly aromatic fluorene moiety and flexible thioether linkages in the molecular chains of the PIs provide them with high refractive indices of 1.6951–1.7258 and small birefringence of 0.0056–0.0070. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1510–1520, 2008     

Synthesis and characterization of poly(fluorene)‐based copolymers containing various 1,3,4‐oxadiazole pendants

A series of soluble alternating poly(fluorene)‐based copolymers containing electron‐transporting 1,3,4‐oxadiazole (OXD) and hole‐transporting carbazole pendants attached to the C‐9 position of fluorene units by long alkyl spacers were synthesized. These copolymers possess mesogenic and nonmesogenic pendants attached to a rigid mesogenic poly(fluorene) (PF) backbone. All these polymers exhibit glass‐forming liquid crystalline properties, including the nematic and smectic A (SmA) phases, and reveal much wider mesophasic temperature ranges than that of PF. The thermal properties and mesomorphism of these conjugated polymers are mainly affected by the nature of these pendants, and thus the mesophasic temperature ranges and glass‐forming properties are greatly enhanced by introducing the OXD pendants. In addition, the tendencies of crystallization and aggregation of PF are also suppressed by introducing the OXD pendants. A single layer device with P4 as an emitter shows a turn‐on voltage of 5 V and a bright luminescence of 2694 cd/m² at 11 V with a power efficiency of 1.28 cd/A at 100 mA/cm². © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2700–2711, 2005