低代端酯基PAMAM树形分子存在下银纳米颗粒的制备

在低代端酯基PAMAM树形分子(G1.5-COOCH₃)存在时，用氢气还原AgNO₃制备出银纳米颗粒。用透射电子显微镜(TEM)，电子衍射(ED)，紫外-可见吸收光谱(UV-Vis)和红外光谱(FT-IR)对所制备的银纳米颗粒进行了表征。实验结果表明，当用氢气作为还原剂时，以低代树形分子为保护剂，通过优化还原条件，可成功制备尺寸稳定、均一的银纳米颗粒，其粒径为2.9±0.5 nm，且所制备的银纳米颗粒的粒径分布较窄。根据树形分子的理论尺寸与制备的银纳米颗粒的粒径关系，可推断出大多数的银纳米颗粒是由多个树形分子所包围而稳定存在。     

Effect of Head Size in Head‐Tail‐Type Polycations on their in vitro Performances as Nonviral Gene Vectors

Three kinds of head‐tail‐type block copolymers composed of polyamidoamine (PAMAM) dendron heads and poly(L ‐lysine) (PLL) tail blocks (PAMAM dendron‐PLL), having PAMAM dendrons with different generations (G2.5‐PLL, G3.5‐PLL and G4.5‐PLL) were synthesized. Some of the dendron heads were located at polyplex surface, and G2.5‐PLL and G3.5‐PLL could form small polyplexes (less than 150 nm in size). G2.5‐PLL and G3.5‐PLL polyplexes were taken up into the cells more effectively. PAMAM dendron‐PLL that had a larger dendron head could show a more‐effective buffering effect. The in vitro performance of the PAMAM dendron‐PLL polyplexes was controlled by the balance of cellular uptake and endosomal escape by a buffering effect.

     

Antioxidant action by gold-PAMAM dendrimer nanocomposites

Gold-dendrimer nanocomposites were prepared in the presence of poly(amidoamine) (PAMAM) dendrimer (generation 3, 3.5, 5, and 5.5) via reduction of HAuCl4 with sodium borohydride. The average particle size of the gold nanoparticles was independent of the dendrimer concentration, ranging between 3.0 and 4.3 nm in diameter. The catalytic activities of the gold-dendrimer nanocomposites upon elimination of hydroxyl radicals formed in an H2O2/FeSO4 system were examined using a spin-trapping method. The gold-dendrimer nanocomposites exhibited high catalytic activities which were hardly affected by the concentration and the generation of the dendrimer except PAMAM dendrimer 3.5. The highest activity for the gold-PAMAM dendrimer 3.5 nanocomposites was 85 times that of ascorbic acid.     

Thiophene dendron jacketed poly(amidoamine) dendrimers: nanoparticle synthesis and adsorption on graphite

The peripheral functionalization of amine-terminated fourth-generation poly(amidoamine) (PAMAM) with thiophene dendrons and the preparation of dendrimer-encapsulated metal nanoparticles are described. Interesting nanoparticle stabilization and energy-transfer properties were observed with these hybrid materials. The synthesis involved imine coupling of the dendron derivatives to the peripheral amine groups of PAMAM followed by reduction. The formation of these metal-organic nanoparticle hybrid materials was monitored by UV-vis spectroscopy. The complexation of metal ions and the stabilization effect of PAMAM on metal nanoparticles were investigated by FT-IR. Energy transfer was observed between the metal surface plasmon absorption and fluorescence of the terthiophene dendrons. Noncontact magnetic-AC mode AFM imaging revealed the formation of monodispersed and very stable nanoparticles adsorbed on an HOPG flat substrate.     

Morphological change of gold-dendrimer nanocomposites by laser irradiation

Gold-dendrimer nanocomposites are prepared in aqueous solutions in the presence of poly(amidoamine)dendrimers (PAMAM) (generation 3 and 5) or poly(propyleneimine)dendrimers (PPI) (generation 3 and 4) by wet chemical NaBH(4) method. Thus prepared gold-dendrimer nanocomposites are irradiated by laser at 532 nm. UV-vis absorption spectroscopy and transmission electron microscopy reveal that the gold nanoparticles grow with the laser irradiation time as well as the fluence of the laser; in particular, the gold nanoparticles prepared at lower concentrations of PAMAM dendrimer as well as lower generations of PAMAM grow significantly. On the other hand, in the case of PPI dendrimers, the gold nanoparticles hardly grow by irradiation. In addition, dynamic light-scattering measurements show that the laser irradiation markedly promotes the association of the gold-PAMAM G3 dendrimer nanocomposites compared to that of the gold-PAMAM G5 dendrimer nanocomposites, while the sizes of association for the gold-PPI G3, G4 dendrimer nanocomposites hardly change by laser irradiation.     

Preparation of PAMAM- and PPI-metal (silver, platinum, and palladium) nanocomposites and their catalytic activities for reduction of 4-nitrophenol

Dendrimer-metal (silver, platinum, and palladium) nanocomposites are prepared in aqueous solutions containing poly(amidoamine) (PAMAM) dendrimers with surface amino groups (generations 3, 4, and 5) or poly(propyleneimine) (PPI) dendrimers with surface amino groups (generations 2, 3, and 4). The particle sizes of the metal nanoparticles obtained are almost independent of the generation as well as the concentration of the dendrimer for both the PAMAM and the PPI dendrimers; the average sizes of silver, platinum, and palladium nanoparticles are 5.6-7.5, 1.2-1.6, and 1.6-2.0 nm, respectively. It is suggested that the dendrimer-metal nanocomposites are formed by adsorbing the dendrimers on the metal nanoparticles. Studies of the reduction reaction of 4-nitrophenol by these nanocomposites show that the rate constants are very similar between PAMAM and PPI dendrimer-silver nanocomposites, whereas the rate constants for the PPI dendrimer-platinum and -palladium nanocomposites are greater than those for the corresponding PAMAM dendrimer nanocomposites. In addition, it is found that the rate constants for the reduction of 4-nitrophenol involving all the dendrimer-metal nanocomposites decrease with an increase in the dendrimer concentrations, and the catalytic activity of dendrimer-palladium nanocomposites is highest.     

New insights into the structure of PAMAM dendrimer/gold nanoparticle nanocomposites

In this work, we have employed a suite of complementary analytical techniques to shed light on the nanocomposite structures formed during gold nanoparticles (AuNPs) synthesis in the presence of poly(amidoamine) (PAMAM) dendrimers. Nanocomposites of AuNPs and either fourth or eighth generation amine-terminated PAMAM dendrimers (G4 or G8) were prepared. The size distributions of AuNPs and the nanocomposites were determined by transmission electron microscopy. Atomic force microscopy phase imaging and neutral impact collision ion scattering spectroscopy (NICISS) were utilized for the first time to investigate and compare nanocomposite structures formed from G4 and G8. Our results suggest that G4 stabilized the AuNP by capping the AuNP particle surface but that a certain fraction of the gold surface was still barely covered. In contrast, the metal nanoparticle surface was completely covered by G8. In addition, NICISS results provided evidence that nanocomposites deformed when being deposited directly onto a substrate.     

萘和丹酰基修饰的扇形树枝状分子聚集体的能量转移行为

分别对1-3代聚(酰胺-胺)(PAMAM)结构的dendron分子的外端基和focal point进行了修饰,得到了外端基为萘(给体)色团、焦点(focal point)为丹酰(受体)色团的树枝状化合物Dan-ABπ-Nap(n=2,4,8).利用荧光光谱测定了不同浓度下所得一系列树枝状分子在水中的荧光强度,并计算了它...     

Synthesis and catalytic activity of gold-silver binary nanoparticles stabilized by PAMAM dendrimer

Gold-silver binary nanoparticles, which feed atomic ratios of gold to silver were 3:1, 1:1, and 1:3, were prepared. These particles were stabilized by amine-terminated (generation (G) 3.0 and 5.0) and carboxyl-terminated (G 3.5 and 5.5) poly(amidoamine) (PAMAM) dendrimers in water. UV-vis spectra indicate that the particles are not mere physical mixtures of monometallic particles or core/shell type but alloy. According to transmission electron microscope (TEM) observation, the mean diameters of the particles were 7-10 nm for silver particles and 3-4 nm for both gold and alloy particles, respectively. Catalytic activities for reduction of p-nitrophenol were investigated by monitoring the absorbance at 400 nm during the reaction. They were proportional to the feed ratio of gold in the particles and showed a maximum at the ratio of Au:Ag=3:1.     

以枝形大分子聚酰胺-胺(PAMAM)为键合固定相的开管毛细管电色谱柱的制备及评价

用3-氨丙基三乙氧基硅烷(KH550)作偶联剂, 在毛细管内壁上逐步合成树枝形大分子聚酰胺-胺(PAMAM), 制得了1, 2和3代PAMAM键合的开管毛细管电色谱柱, 并对其性能进行了研究. 结果表明, 随着大分子代数的增加, 毛细管电渗流(EOF)逐步下降. 利用制得的1, 2和3代PAMAM修饰的开管毛细管电色谱柱对丙氨酸和脯氨酸的分离进行对比, 结果显示, 随着大分子PAMAM代数的增加, 分离度逐步增大, 丙氨酸和脯氨酸可在3代树枝状大分子PAMAM修饰的开管毛细管电色谱柱上达到基线分离. 采用非衍生化法和3代PAMAM修饰的开管毛细管电色谱柱成功地分析了精氨酸、 丙氨酸、 脯氨酸、 甲硫氨酸和组氨酸. 结果表明, 键合毛细管柱具有良好的重现性和稳定性.     

Nonlinear optical polyimides consisting of chromophore‐containing dendrons with site‐isolation effect

To investigate the dendritic structure effects on the electro‐optical (EO) coefficients and thermal stability of the nonlinear optical (NLO) active materials, a bifunctional compound, IDD (4‐isocyanato‐4′(3,3‐dimethyl‐ 2,4‐dioxo‐acetidino)‐diphenylmethane) was used as a building block to synthesize a series of novel NLO chromophore‐containing dendritic structures including Generation 0.5 (G0.5) to Generation 3 (G3). The glass transition temperatures (T_g) of G1–G3 dendrons were in the range of 76–116°C, whereas only the G0.5 dendron exhibited a melting temperature (T_m), 98°C. Moreover, a series of NLO‐active guest–host systems ranging from polyimide‐G0.5 (PI‐G0.5) to polyimide‐G3 (PI‐G3) were prepared by blending 20 wt% chromophore‐containing dendron with a high T_g polyimide. EO coefficients ranged from 6.1 to 12.9 pm/V. The r₃₃/dye content ratio increased with increasing generation of dendron‐containing polyimide samples. Particularly, the improvement in r₃₃/dye content ratio of PI‐G2.5 sample tripled as compared to that of the guest–host sample with Disperse Red 1. Excellent temporal stability of PI‐G0.5 and PI‐G1.5 at 80°C was obtained. Moreover, waveguide properties for NLO polymers containing higher generation dendrons (3.1–3.6 dB/cm at 830 nm) were also obtained. Copyright © 2008 John Wiley & Sons, Ltd.     

聚酰胺-胺树状分子接枝到方法修饰多壁碳纳米管

采用聚酰胺-胺树状分子(PAMAM)“接枝到”这一温和而简单易行的方法修饰多壁碳纳米管(MWCNTs),制备了一种树状分子/碳纳米管(MWCNTs-g-PAMAM)纳米复合材料。在水、甲醇和乙醇等极性溶剂中,该复合材料具有很好的分散性。通过傅立叶变换红外光谱(FTIR)、X-射线光电子能谱(XPS)、热重分析(TGA)和透射电子显微镜(TEM)等对MWCNTs-g-PAMAM纳米复合材料进行了表征。FTIR表明接枝修饰是PAMAM与MWCNTs的共价键结合,TGA数据表明PAMAM成功修饰于MWCNTs侧壁,且接枝到MWCNTs上PAMAM的量随其代数(G1.0～G4.0)的不同而不同,具体顺序为G2.0＞G1.0≈G3.0＞G4.0.     

Synthesis and Characterization of Gold‐Nanoparticle‐Cored Dendrimers Stabilized by Metal–Carbon Bonds

Synthesis and characterization of gold‐nanoparticle‐cored dendrimers (NCDs), in which the dendrons are attached to the gold core through gold–carbon bonds, are described. Synthesis of these materials involved the simultaneous reduction of HAuCl₄ and a Fréchet‐type dendron with a diazonium group at the focal point, all in an organic solvent such as toluene. These materials possess a nanometer‐sized gold core surrounded by a shell of polyaryl ether dendrons, which are connected radially to the core. The NCDs were characterized by TEM, thermogravimetric analysis (TGA), and IR, UV, and NMR spectroscopic techniques. Average particle diameter of the NCDs ranged from 4.7 to 5.5 nm for the different generations. All NCDs exhibit the characteristic plasmon absorption of gold nanoparticles at 520 nm. Average numbers of dendrons per NCD in AuG_n were calculated using results from TGA and TEM studies. Multiple layering of the dendrons is proposed as a possible reason for the high dendron/NCD value.     

Supramolecular Self-Associations of Amphiphilic Dendrons and Their Properties

This review presents precisely defined amphiphilic dendrons, their self-association properties, and their different uses. Dendrons, also named dendritic wedges, are composed of a core having two different types of functions, of which one type is used for growing or grafting branched arms, generally multiplied by 2 at each layer by using 1→2 branching motifs. A large diversity of structures has been already synthesized. In practically all cases, their synthesis is based on the synthesis of known dendrimers, such as poly(aryl ether), poly(amidoamine) (in particular PAMAM), poly(amide) (in particular poly(L-lysine)), 1→3 branching motifs (instead of 1→2), poly(alkyl ether) (poly(glycerol) and poly(ethylene glycol)), poly(ester), and those containing main group elements (poly(carbosilane) and poly(phosphorhydrazone)). In most cases, the hydrophilic functions are on the surface of the dendrons, whereas one or two hydrophobic tails are linked to the core. Depending on the structure of the dendrons, and on the experimental conditions used, the amphiphilic dendrons can self-associate at the air-water interface, or form micelles (eventually tubular, but most generally spherical), or form vesicles. These associated dendrons are suitable for the encapsulation of low-molecular or macromolecular bioactive entities to be delivered in cells. This review is organized depending on the nature of the internal structure of the amphiphilic dendrons (aryl ether, amidoamine, amide, quaternary carbon atom, alkyl ether, ester, main group element). The properties issued from their self-associations are described all along the review.     

Fabrication and properties of fullerodendron thin films

Thin films of fullerodendron (C(60)(Gn-COOMe) (n = 0.5, 1.5, 2.5)), which was synthesized from fullerene and anthracenyl poly(amido amine) dendron with methyl ester terminals and different generations (G), were fabricated by the Langmuir-Blodgett (LB) and adsorption techniques. It was characterized by X-ray reflectometry that the LB films possessed well-ordered structure, although the adsorption method led to random orientation of molecules. As to C(60)(G0.5-COOMe) and C(60)(G1.5-COOMe), the LB films took a four-layer structure consisting of a double layer of molecules, and fullerene moieties exist in the interior of the LB films. On the other hand, C(60)(G2.5-COOMe) led to a two-layer structure in which the fullerene moieties were at the air side and the dendron moieties were at the substrate side. With increasing generation of dendron, the monolayer formation ability at the air/water interface as amphiphilic molecule strengthens and the amphiphilic property becomes superior to the fullerene-fullerene attractive interaction that prevents the monolayer formation. Furthermore, in the case of C(60)(G0.5-COOMe) and C(60)(G1.5-COOMe), the reduction peak in cyclic voltammetry of the LB film remained even after UV light irradiation. On the contrary, the peak of the C(60)(G2.5-COOMe) LB film disappeared, indicating that molecular arrangement in the films affects electrochemical properties.     

Photophysical and self‐assembly behavior of poly(amidoamine) dendrons with chromophore as scaffold: The effect of dendritic architecture

Two series of amphiphiles composed of hydrophilic poly(amidoamine) dendrons (from the first to the third generation) as the shell and hydrophobic aromatic chromophores (3,6‐di(maleimidyl)‐9‐phenyl carbazole and 9‐(4′‐maleimidyl phenyl)‐3‐maleimidyl carbazole) as the central scaffold were synthesized. The effect of dendritic architecture on the photophysical properties and the self‐assembly behavior of these amphiphiles were studied by UV–vis absorption spectroscopy, fluorescence spectroscopy, and transmission electron microscopy (TEM) measurements. Both the generation of dendritic shell and the location of dendrons at the chromophoric scaffold had great effect on the photophysical properties of these amphiphiles. In addition, different spherical aggregates were formed from these amphiphiles in the aqueous solution at different concentrations. Because of the combined effects of steric hindrance and architecture of dendritic shells, the amphiphiles from G2 dendron with central chromophore self‐organized into ordered aggregates more readily than that from G1 and G3. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4584–4593, 2008     

Sodium dodecyl sulfate-poly(amidoamine) interactions studied by AFM imaging, conductivity, and Krafft temperature measurements

The conductivity, kappa, and Krafft temperature, TK, of sodium dodecyl sulfate (SDS) with poly(amidoamine) dendrimers (PAMAM) of 0.0, 0.5, and 1.0 generations (G) have been determined at different surfactant as well as PAMAM concentrations. The critical micelle concentration of SDS increases with the increase in the amount of each generation and the additive effect of 0.5G is maximum. TK of SDS shows a systematic decrease with maximum reduction in the presence of 0.5G. Atomic force microscopy (AFM) captures a layered pattern of 1.0G in the form of nanorods and no AFM images are detected for 1.0G in the presence of SDS. All results demonstrate that SDS has favorable interactions with ester-terminated 0.5G PAMAM rather than amine-terminated 0.0G and 1.0G.     

Characterization of magnetic nanoparticles modified with thiol functionalized PAMAM dendron for DNA recovery

Magnetic nanoparticles (MNPs) modified with the thiol functionalized polyamidoamine (PAMAM) dendron were synthesized to estimate their DNA recovery capabilities. Aminosilane-modified MNPs and MNPs surrounded by a phospholipid (distearoylphosphatidylethanolamine (DSPE)) bilayer were used as core particles. Cystamine-core PAMAM dendrimers were reduced by dithiothreitol to dendron thiols and chemically conjugated to the core particles. Characterization of the synthesis revealed an increase of the surface amine charge from generation 1 (G1) to G6, starting with an aminosilane initiator. Particle size distribution analysis indicated that G6 PAMAM-modified MNPs exhibited monodispersity in an aqueous solution. G6 PAMAM-MNPs and G6 PAMAM-PE-MNPs synthesized by the proposed method have equivalent DNA recovery abilities to PAMAM-MNPs prepared by the conventional divergent synthesis method. In optimized conditions, 96% of λDNA was recovered using G6 PAMAM-PE-MNPs. Therefore, the method for preparing PAMAM-MNPs and PAMAM-PE-MNPs proposed in this study will be a novel approach for producing DNA carriers for efficient DNA purification by magnetic separation.     

Copper-free click conjugation of methotrexate to a PAMAM dendrimer platform

The synthesis of a generation 5 (G5) poly(amidoamine) (PAMAM) dendrimer platform having cyclooctyne ligands that were subsequently be used for a copper-free Huisgen 1,3-dipolar cycloaddition (click reaction) with azido modified methotrexate is described. The G5 PAMAM dendrimer was first partially (70%) acetylated and then coupled with 20 cyclooctyne ligands through amide bonds. The remaining primary amine groups on the dendrimer surface were neutralized by acetylation. The platform was then ‘clicked’ with different numbers (5, 10, and 17) of γ-azido functionalized methotrexate. The copper-free click reactions were stoichiometric with excellent yields.     

Synthesis of fluorescent dendritic 8-hydroxyquinoline ligands and investigation on their coordinated Zn(II) complexes

A series of luminescent PAMAM dendrons emanating from 8-hydroxyquinoline have been synthesized and their coordination with Zn(II) was investigated for the first time. The obtained dendritic Zn(II) complexes were soluble in common organic solvents. It was found that the luminescence intensity of G2 dendron 6 was higher than that of G1 dendron 4. Furthermore, when they were coordinated with Zn(II), red-shift was observed and the intensities of the coordinated Zn(II) complexes were higher than that of the corresponding ligands.