Solvatochromic parameters for binary mixtures of an ionic liquid with various protic molecular solvents

Abstract  Solvatochromic parameters (E _T ^N, normalized polarity parameter; π*, dipolarity/polarizability; β, hydrogen-bond acceptor basicity; α, hydrogen-bond donor acidity) have been determined for binary mixtures of propan-2-ol, propan-1-ol, ethanol, methanol and water with recently synthesized ionic liquid (IL; 2-hydroxyethylammonium formate) at 25 °C. In all solutions except aqueous solution, E _T ^N values of the media increase abruptly with the ILs mole fraction and then increase gradually to the value of pure IL. A synergistic behavior is observed for the α parameter in all solutions. The behavior of π* and β are nearly ideal for all solutions except for solutions of methanol with the IL. The applicability of nearly ideal combined binary solvent/Redlich–Kister equation was proved for the correlation of various solvatochromic parameters with solvent composition. The correlation between the calculated and the experimental values of various parameters was in accordance with this model. Solute–solvent and solvent–solvent interactions were applied to interpret the results. Graphical Abstract  Predicted values of solvatochromic parameters (SP) (E _T ^N, normalized polarity parameter; π*, dipolarity/polarizability; β, hydrogen-bond acceptor basicity; α, hydrogen-bond donor acidity) from the correlation equations versus its experimental values for binary mixtures of 2-hydroxyethylammonium formate with water, methanol, ethanol, propan-1-ol and propan-2-ol.      

Solvent Effect on Protonation Constants of 5, 10, 15, 20-Tetrakis(4-sulfonatophenyl)porphyrin in Different Aqueous Solutions of Methanol and Ethanol

The protonation constants of 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin, H₂tpps⁴⁻, were determined in water–ethanol and water–methanol mixed solvents, using a combination of spectrophotometric and potentiometric methods at 20 °C and 0.1 mol⋅dm⁻³ sodium perchlorate as supporting electrolyte. Two protonation constants, K ₁ and K ₂, were characterized and were analyzed in various media in terms of the Kamlet, Abboud and Taft (KAT) parameters. Single-parameter correlations of the protonation constant K ₁ versus α (hydrogen-bond donor acidity) and π ^* (dipolarity/polarizability) are poor in all solutions, but dual-parameter (α and π ^*) correlation represents a significant improvement with regard to the single- and multi-parameter models. However, the single-parameter correlation of log ₁₀ K ₂ in terms of β (hydrogen-bond acceptor basicity) shows a better result than dual- and multi-parameter correlations. Linear correlation is observed when the experimental log ₁₀ K ₁ and log ₁₀ K ₂ values are plotted versus the calculated ones when the KAT parameters are considered. To evaluate the protonation constants of H₂tpps⁴⁻, the Yasuda-Shedlovsky extrapolation is used to obtain the log ₁₀ K ₁ and log ₁₀ K ₂ values at zero percent organic solvent. Finally, the results are discussed in terms of the effect of the solvent on protonation.     

Solvatochromic studies on the hydrogen-bond donating and dipolarity/polarizability properties of the polyethylene oxide/silica interface

The polarity of the polyethylene oxide(PEO)/silica interface in 1,2-dichloroethane as solvent is classified by means of linear solvation energy (LSE) relationships . The properties of the bare silica particle surface and the silica/PEO interface is expressed by two terms: the dipolarity/polarizability (π*) of the interface and the hydrogen-bond donating ability (α) of the surface silanols. These terms can be defined by using the Kamlet–Taft solvent parameters α and π* as a reference system. The interfacial polarity parameters α and π* were calculated by means of correlation analyses of the energy of the UV/vis absorption maxima of the surface polarity indicators: di-cyano-bis(1,10-phenanthroline) iron II, bis-4,4′-(N,N-dimethylamino) benzophenone, and 2,6-diphenyl-4-(2,4,6-triphenyl-N-pyridino)phenolate when adsorbed onto the PEO/silica particle surface. The experimental values of the E _T(30) parameter of the PEO/silica interface are compared with independently calculated values employing specific LSE relations derived for well-behaved regular solvents and functionalized silicas. PEO adsorption on silica causes a decrease in the value of the α parameter of the silica surface and an evident increase in the dipolarity/polarizability of the interface. Received: 16 December 1998 Accepted in revised form: 8 January 1999     

Solvatochromic Probes Absorbance Behavior in Mixtures of 2-Hydroxy Ethylammonium Formate with Methanol,Ethylene Glycol and Glycerol

Solute-solvent and solvent-solvent interactions were investigated for binary mixtures of an ionic liquid (IL) 2-hydroxy ethylammonium formate as with methanol, ethylene glycol and glycerol. The physicochemical properties of the solvent mixtures at 25 °C, over the whole range of mole fractions, were determined using solvatochromic probes. High normal polarity (E_T^NE_{T}^{N}) in the alcohol-rich region confirms solute-solvent interactions in this medium. Dipolarity/polarizability (π ^∗) show a different trend to E_T^NE_{T}^{N} with a positive deviation from ideal behavior in IL-glycerol mixtures. However, these deviations for other solvent mixtures are insignificant. Contrary to what is observed for E_T^NE_{T}^{N} and π ^∗, hydrogen-bond donor (HBD) acidity and hydrogen-bond acceptor (HBA) basicity demonstrate similar trends. The applicability of the combined nearly-ideal binary solvent/Redlich-Kister (CNIBS/R-K) equation for the correlation of various parameters provides a simple computational model to correlate and/or predict various solvatochromic parameters for many binary solvent systems.     

The Solvent-Like Nature of Silica Particles in Organic Solvents

Summary.   Kamlet-Taft’s α (hydrogen bond donor acidity) and π^* (dipolarity/polarizability) values of various silica batches measured in various solvents are presented. The α and π^* parameters for the various solid acids are analyzed by means of Fe(phen)₂(CN)₂ (cis-dicyano-bis-(1,10)-phenanthroline-iron(II), 1), Michler’s ketone (4,4′-bis-(dimethylamino)-benzophenone, 2), and two hydrophilic derivatives of 2, (4-(dimethylamino)-4′-(di-2-hydroxyethyl)-amino-benzophenone (3a) and 4,4′-bis-(di-(2-hydroxyethyl)-amino)-benzophenone (3b) as well as coumarin 153 (4) as solvatochromic surface polarity indicators. Apparent β (hydrogen bond acceptor basicity) parameters for bare silica have been evaluated by means of an aminobenzodifuranone dye (5) as solvatochromic probe. The chemical interpretation of the α and π^* parameters and the nature of the solvent/surface interaction which they reflect are discussed. It can be shown that an increase of the HBA (hydrogen bond accepting) capacity of the solvent significantly decreases the HBD (hydrogen bond donating) capacity of the surface environment, whereas the dipolarity/polarizability value of the silica/solvent interface is a composite of many effects. The classification of the polarity of silica particles in organic solvents compared to pure liquids is outlined. Theoretical E _T(30) values of the solid/solvent interfaces are calculated by applying linear solvation energy (LSE) relationships using the independently measured α and π^* values of the solid acids according to Received February 2, 2001. Accepted (revised) March 3, 2001     

Fluorescence and photochemical properties of crystalline boron difluorides β-diketonato

The fluorescence and photochemical properties of crystalline β-diketonatoboron difluorides (DBD) RCOCHCOR¹BF₂ were studied. These compounds are characterized by relatively high photochemical stability. The introduction of electron-donating groups into the aromatic α-substituent of the chelate ring increases and the introduction of electron-withdrawing groups decreases the fluorescence intensity of DBD. Anisoylbenzoylmethanotoboron difluoride was found to exhibit the highest fluorescence intensity. The substituents were shown to influence the relative arrangement of singlet and triplet ηπ^* and ππ^* levels and luminescence properties of compounds. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1030–1033, June, 2000.     

Solute-Solvent Interaction Effects on Protonation Equilibrium of Some Water-Insoluble Flavonoids

The protonation constants of three different flavonoids (naringenin, chrysin, and daidzein) were determined in water–DMSO mixed solvents using a potentiometric method at 25.0 (±0.1) °C and 1.00 mol⋅dm⁻³ tetra-n-butylammonium chloride as supporting electrolyte. The protonation constants were characterized and were analyzed in various solvent media in terms of the Kamlet, Abboud and Taft (KAT) parameters. Single-parameter correlations of the protonation constants versus α (hydrogen-bond donor acidity), β (hydrogen-bond acceptor basicity) or π ^∗ (dipolarity/polarizability) are poor for all compounds, but the dual-parameter α and π ^∗ correlation presents significant improvement with regard to the single- and multi-parameter models. A linear correlation is observed when the logarithm of the experimental protonation constants is plotted versus the calculated ones when the KAT parameters are considered. The protonation constants of the flavonoids in water were also calculated by the Yasuda-Shedlovsky extrapolation method at zero percent organic solvent. Finally, the results are discussed in terms of the effect of solvent composition on the protonation constants.     

Study of Densities, Viscosities and Ultrasonic Speeds of Binary Mixtures Containing 1,2-Dimethoxyethane and an Alkan-l-ol at 298.15 K

The viscosity deviation (Δη), the excess molar volume (V ^E) and the ultrasonic speed (u) have been investigated from viscosity (η) and density (ρ ) measurements of binary liquid mixtures of 1,2-dimethyoxyethane with methanol, ethanol, propan-1-ol, butan-1-ol, pentan-1-ol, hexan-1-ol or octan-1-ol over the entire range of composition at 298.15 K. The excess volumes are negative over the entire range of composition for all of the mixtures with the exception of hexan-1-ol and octan-1-ol. The excess isentropic compressibilities (K _S ^E) and viscosity deviations are negative for all of the mixtures. The magnitudes of the negative values of V ^E decrease with the number of carbon atoms of the alkan-1-ol. The trend of increasing K _S ^E values with the chain length of the alkanol is similar to that observed in the case of V ^E. Graphs of V ^E, Δ η, K _S ^E, Δ u, L _f ^E and Z ^E against composition are presented as a basis for a qualitative discussion of the results.     

On the Role of the Solvent and Substituent on the Protonation Equilibria of Di-Substituted Anilines in Dioxane–Water Mixed Solvents

Protonation constants of a number of di-substituted anilines were determined potentiometrically in 0, 20, 30, 40, 50, and 60% (v/v) dioxane–water mixtures at (25.00 ± 0.02) ^∘C with an ionic strength of 0.10 mol-dm⁻³ sodium perchlorate. The data are discussed in terms of the electronic character of the substituents. Two different methods were used to study the effects of the solvents on the protonation constants; one involved a single polarity parameter, the Dimroth–Reichardt parameter E_T(30); the other involved the Kamlet–Taft multi-parametric method. The protonation constants of di-substituted anilines correlate with the molecular parameters for the dipolarity/polarizability of the solvent, π^∗, and its hydrogen-bond acceptor ability, β.     

Topological investigations of the molecular species and molecular interactions that characterize pyrrolidin-2-one + lower alkanol mixtures

Molar excess volumes, V^E, molar excess enthalpies, H^E, and speeds of sound data, u, of pyrrolidin-2-one (i) + ethanol or propan-1-ol or propan-2-ol or butan-1-ol (j) binary mixtures have been determined over entire composition range at 308.15 K. The observed speeds of sound data have been utilized to predict excess isentropic compressibilities, of the investigated binary mixtures. The observed excess thermodynamic properties V^E, H^E and have been analyzed in terms of Graph theory. The analysis of V^E data by the Graph theory suggests that pyrrolidin-2-one exists mainly as a mixture of cyclic and open dimer; ethanol as a mixture of dimer and trimer; butan-1-ol and propan-2-ol as mixture of monomer and dimer and propan-1-ol as a dimer in the pure state, and their mixtures contain 1:1 molecular complex. The IR studies lend additional credence to the nature and extent of interactions for the proposed molecular entities in the mixtures. Also, it has been observed that V^E, H^E and values predicted by the Graph theory compare well to with their corresponding experimental values.     

A study of solvent effects on complex formation of tungsten(VI) with ethylenediaminediacetic acid in aqueous solutions of propanol

By using spectrophotometric and potentiometric techniques, the formation constants of the species formed in the systems H⁺+W(VI) + ethylenediaminediacetic acid and H⁺ + ethylenediaminediacetic acid were determined in aqueous solutions of propanol at 25°C and a constant ionic strength of 0.1 mol dm⁻³ sodium perchlorate. The composition of the complex was determined by the continuous variation method. It was shown that tungsten(VI) formed a mononuclear 1: 1 complex with ethylenediaminediacetic acid of the type WO₃L³⁻ at −log[H⁺] = 5.8. The formation constants in various media were analyzed in terms of the Kamlet-Taft parameters. Solvents were parameterized by dipolarity/polarizability scales π*, hydrogen-bond donor (HBD) strength α, and hydrogen-bond acceptor strength β. Linear dependences (LSERs) on these solvent parameters were used to correlate and predict a wide variety of solvent effects and provide an analysis of them. Linear relationships were observed when log K_S values were plotted versus π*. Finally, the results are discussed in terms of the effect of solvents on complex formation. The article is published in the original.     

The Solvent-Like Nature of Silica Particles in Organic Solvents

 Kamlet-Taft’s α (hydrogen bond donor acidity) and π^* (dipolarity/polarizability) values of various silica batches measured in various solvents are presented. The α and π^* parameters for the various solid acids are analyzed by means of Fe(phen)₂(CN)₂ (cis-dicyano-bis-(1,10)-phenanthroline-iron(II), 1), Michler’s ketone (4,4′-bis-(dimethylamino)-benzophenone, 2), and two hydrophilic derivatives of 2, (4-(dimethylamino)-4′-(di-2-hydroxyethyl)-amino-benzophenone (3a) and 4,4′-bis-(di-(2-hydroxyethyl)-amino)-benzophenone (3b) as well as coumarin 153 (4) as solvatochromic surface polarity indicators. Apparent β (hydrogen bond acceptor basicity) parameters for bare silica have been evaluated by means of an aminobenzodifuranone dye (5) as solvatochromic probe. The chemical interpretation of the α and π^* parameters and the nature of the solvent/surface interaction which they reflect are discussed. It can be shown that an increase of the HBA (hydrogen bond accepting) capacity of the solvent significantly decreases the HBD (hydrogen bond donating) capacity of the surface environment, whereas the dipolarity/polarizability value of the silica/solvent interface is a composite of many effects. The classification of the polarity of silica particles in organic solvents compared to pure liquids is outlined.     

Experimental designs dedicated to the evaluation of a membrane extraction method: membrane-assisted solvent extraction for compounds having different polarities by means of gas chromatography–mass detection

Membrane-assisted solvent extraction was applied for the determination of different classes of compounds in water, having K _o/w (octanol–water partition coefficient) values between 10¹ (aniline) and 10⁸ (methyl stearate), by means of experimental designs. Four solvents were investigated—propan-2-ol, ethyl acetate, diisopropyl ether and cyclohexane—as well as extraction time, temperature, salt impact, pH and methanol addition. The best choice was diisopropyl ether, 50 °C, 30 min and an addition of 3 g of sodium chloride at pH 2 for polar compounds. The relative standard deviation (n = 3) was found in the range from 5 to 17%. Recoveries ranged between 34 and 100%. Membrane-assisted solvent extraction was successfully applied to a fast screening method dedicated to an unknown wastewater sample.     

Orbital phase control of the conformations of α- and β-substituted enamines and vinyl ethers

The conformational stabilities of the α- and β-substituted enamines and vinyl ethers were predicted by orbital phase theory and confirmed by ab initio molecular orbital calculations. Cyclic interaction significantly occurs among the nonbonding orbital n _Y for the lone pair on the hetero atom Y (N in the enamines or O in the ethers), the π and π* orbitals of the CC bond, and the σ_C-H or σ*_C-X orbitals on the substituent CH₂X. The cyclic -n _Y-π-σ_C-H-π*- interaction is favored by the orbital phase continuity in the α-substituted molecules, while the cyclic -n _Y-π-σ*_C-X-π*- interaction is favored in the β-substituted molecules. The most stable conformation was then predicted to be synperiplanar or (pseudo)equatorial in the α-substituted molecules and anticlinical or (pseudo)axial in the β-substituted molecules. Received: 8 May 1998 / Accepted: 30 July 1998 / Published online: 16 November 1998     

Prediction of the chromatographic behaviour for a series of diuretic compounds

Summary The proportion of organic modifier and the pH of the acetonitrile-water mixtures used as mobile phases were optimized in order to separate a group of diuretic compounds covering a wide range of physyco-chemical properties. The Linear Solvation Energy Relationship (LSER) formalism based either on the multiparameter π^*, β and α scales or the single solvent polarity parameterE _T ^N , have been used to predict their chromatographic behaviour as a function of the percentage of acetonitrile in the eluent. Moreover, correlation established between retention and pH of the aqueous-organic mobile phases have been used to predict the chromatographic behaviour of the diuretic compounds studied as a function of the eluent pH. Linear correlation between a function of the eluent pH. Linear correlation between the chromatographic retention and theE _T ^N polarity parameter of mobile phases containing different percentages of organic modifier has been obtained Based on the knowledge of the acid-base dissociation constant the relation between retention and mobile phase pH has also been linearized. These relationship allowed an important reduction of the experimental retention data needed for developing a given separation and a great improvement in chromatographic optimization schemes.     

New polyhydroxysteroids and steroid glycosides from the far east starfishCeramaster patagonicus

Two new polyhydroxysteroids and five new glycosides were isolated from the starfishCeramaster patagonicus and their structures were elucidated: 5α-cholestane-3β,6α,15β,16β,26-pentol, (22E)-5α-cholest-22-ene-3β,6α,8,15α,24-pentol, (22E)-28-O-[O-(2-O-methyl-β-d-xylopyranosyl)-(1→2)-β-d-galactofuranosyl]-24-hydroxymethyl-5α-cholest-22-ene-3β,4β, 6α,8,15β,16β,28-heptol (ceramasteroside C₁), (22E)-28-O-[O-(2,4-di-O-methyl-β-d-xylopyranosyl)-(1→2)-β-d-galactofuranosyl]-24-hydroxymethyl-5α-cholest-22-ene-3β, 6α,8,15β,16β,28-hexol (ceramasteroside C₂), (22E)-28-O-[O-methyl-β-d-xylopyranosyl)-(1→2)-β-d-galactofuranosyl]-24-hydroxymethyl-5α-cholest-22-ene-3β,6α,8,15β,16β 28-hexol (eramasteroside C₃), (22E)-28-O-[O-(2-O-methyl-β-d-xylopyranosyl)-(1→2)-β-d-galactofuranosyl]-24-methyl-5α-cholest-22-ene-3β,4β,6α,8, 15β, 26-hexol (ceramasteroside C₄), and (22E)-28-O-[O-(2-O-methyl-β-d-xylopyranosyl)-(1→2)-β-d-xylopyranosyl]-5α-cholest-22-ene-3β,6α,8,15β,24-pentol (ceramasteroside C₅)). Three known polyhydroxysteroids (24-methylene-5α-cholestane-3β,6α,8,15β,16β,26-hexol, 5α-cholestane-3β,6α,8,15β,16β,26-hexol, and 5α-cholestane-3β,6β,15α,16β,26-pentol) were also isolated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 190–195, January, 1997.     

Isentropic Compressibility Changes of Mixing for 1,3-Dioxolane or 1,4-Dioxane + Water + Propanol Ternary Mixtures

Speed of sound data, u_ijk, of 1,3-dioxolane or 1,4-dioxane(i) + water(j) + propan-1-ol or propan-2-ol(k) ternary mixtures and their sub-binary mixtures, u_ij, of 1,3-dioxolane or 1,4-dioxane(i) + water or propan-1-ol or propan-2-ol(j) and water(i) + propan-1-ol or propan-2-ol(j) mixtures have been measured over the entire composition range at 308.15 K. Isentropic compressibility changes of mixing, (κ_s^E)_ij and (κ_s^E) _ijk, for the binary and ternary mixtures have been determined by employing the observed speeds of sound data and densities (calculated from their molar excess volumes data). The (κ_s^E) _ij and (κ_s^E) _ijk values have also been predicated by the graph theoretical approach and the Flory theory. It has been observed that (κ_s^E) _ij and (κ_s^E) _ijk predicted by the graph theoretical approach compare well with their corresponding experimental values.     

Solvatochromic Parameters and Preferential Solvation Behavior for Binary Mixtures of 1,3-Dialkylimidazolium Ionic Liquids with Water

Binary mixtures of 1,3-dialkylimidazolium based ionic liquids (ILs) and water were selected as solvent systems to investigate the solute-solvent and solvent-solvent interactions on the preferential solvation of solvatochromic indicators at 25℃. Empirical solvatochromic parameters, dipolarity/polarizability (π^*), hydrogen-bond donor acidity (α), hydrogen-bond acceptor basicity (β), and Reichardt's polarity parameters (E_T^N) were measured from the ultraviolet-visible spectral shifts of 4-nitroaniline, 4-nitroanisole, and Reichardt's dye. The solvent properties of the IL-water mixtures were found to be influenced by IL type and IL mole fraction (x_IL). All these studied systems showed the non-ideal behavior. The maximum deviation to ideality for the solvatochromic parameters can be obtained in the xIL range from 0.1 to 0.3. For most of the binary mixtures, the π^* values showed the synergistic effects instead of the E_T^N, α and β values. The observed synergy extent was dependent on the studied systems, such as the dye indicator and IL type. A preferential solvation model was utilized to gather information on the molecular interactions in the mixtures. The dye indicator was preferentially solvated on the following trend: IL >IL-water complex >water.