Phase transition behavior of two-component viologen adsorption layers on a HOPG electrode surface

Phase transition behavior of two-component viologen adsorption layers at a HOPG electrode was described using the results of voltammetric measurements. In the coexistence of heptyl viologen (HV) and its bis-carboxylated derivative in the solution phase, a well-mixed condensed monolayer of the radical cations was formed at any molar fraction. In sharp contrast, the binary system of HV and butyl viologen (BV) exhibited phase separation in the molar fraction range where BV is saturated in the predominantly formed condensed phase of HV. It was, however, found that this separation, being opposed to the prediction based on the adsorption free energy, occurs only when the time period enough for full condensation of HV is not given. The significant features of phase transition of two-component viologen adsorption layers on a HOPG electrode surface were highlighted in comparison with the formation and reductive desorption of the self-assembled monolayers of alkanethiols.     

烷基链长对紫精分子在Cu(100)电极表面吸附结构的影响

用循环伏安法(CV)和原位扫描隧道显微镜(STM)研究了烷基取代的紫精分子在Cu(100)电极上的氧化还原行为及其吸附结构对电极电势的依赖性. 对乙基紫精(DHV)和庚基紫精(DEV)在含有KCl电解质溶液中进行循环伏安曲线的测定, 两者呈现出不同的氧化还原行为. 从STM所得图像观察, 二价庚基紫精在Cl-c(2×2)-Cu(100)电极上呈现出二维有序的点阵组装结构,而二价乙基紫精却未出现任何的吸附结构. 降低电极电势至单电子转移反应发生时, 形成的自由基庚基紫精在电极表面呈现出稳定的条带状组装结构, 而自由基乙基紫精出现的条带组装结构比较密集且不能稳定存在. 继续降低电极电势, 庚基紫精的吸附结构会随之出现明显的变化,而乙基紫精不会有吸附结构改变的响应.     

Electrochemical and STM studies of 1-thio-β-D-glucose self-assembled on a Au(111) electrode surface

In this study, a Au(111) electrode is functionalized with a monolayer of 1-thio-β-D-glucose (β-Tg), producing a hydrophilic surface. A monolayer of β-Tg was formed on a Au(111) surface by either (1) potential-assisted deposition with the thiol in a supporting electrolyte or (2) passive incubation of a gold substrate in a thiol-containing solution. For each method, the properties of the β-Tg monolayer were investigated using cyclic voltammetry (CV), differential capacitance (DC), and chronocoulometry. In addition, electrochemical scanning tunneling microscopy (EC-STM) was used to obtain images of the self-assembled monolayer with molecular resolution. Potential-assisted assembly of β-Tg onto a Au(111) electrode surface was found to be complicated by oxidation of β-Tg molecules. The EC-STM images revealed formation of a passive layer containing honeycomb-like domains characteristic of a formation of S(8) rings, indicating the S-C bond may have been cleaved. In contrast, passive self-assembly of thioglucose from a methanol solution was found to produce a stable, disordered monolayer of β-Tg. Since the passive assembly method was not complicated by the presence of a faradaic process, it is the method of choice for modifying the gold surface with a hydrophilic monolayer.     

Cyclic voltammetric studies of Prussian blue and viologens within a paper matrix for electrochromic printing applications

The apparent redox response of Prussian blue (PB, iron(III) hexacyanoferrate(II)) within a paper matrix is similar to that found in conventional liquid electrolyte voltammetry using a PB-modified electrode; however part of the response is from PB which adsorbs onto the glassy carbon (GC) working electrode. Application of a Nafion® coating to the PB-impregnated paper matrix prevents transfer of PB to the GC surface. In contrast to the PB system, the redox response of the 1,1′-dimethyl-4,4′-bipyridilium (MV, methyl viologen) system, where both redox states examined are soluble, is confined wholly to the paper matrix. For the case of 1,1′-diheptyl-4,4′-bipyridilium (HV, heptyl viologen), the electrogenerated insoluble radical cation salt adsorbs onto the GC electrode, the KCl-impregnated paper acting simply as the electrolyte medium. PB can be electrogenerated within a paper matrix, with the possible application in monochrome electrochromic printing systems.     

Surface modification of GC and HOPG with diazonium, amine, azide, and olefin derivatives

Surface modification of glassy carbon (GC) and highly oriented pyrolytic graphite (HOPG) was carried out with diazonium, amine, azide, and olefin derivatives bearing ferrocene as an electroactive moiety. Features of the modified surfaces were evaluated by surface concentrations of immobilized molecule, blocking effect of the modified surface against redox reaction, and surface observation using cyclic voltammetry and electrochemical scanning tunneling microscope (EC-STM). The measurement of surface concentrations of immobilized molecule revealed the following three aspects: (i) Diazonium and olefin derivatives could modify substrates with the dense-monolayer concentration. (ii) The surface concentration of immobilized amine derivative did not reach to the dense-monolayer concentration reflecting their low reactivity. (iii) The surface modification with the dense-monolayer concentration was also possible with azide derivative, but the modified surface contained some oligomers produced by the photoreaction of azides. Besides, the blocking effect against redox reaction was observed for GC modified with diazonium derivative and for HOPG modified with diazonium and azide derivatives, suggesting fabrication of a densely modified surface. Finally, the surface observation for HOPG modified with diazonium derivative by EC-STM showed a typical monolayer structure, in which the ferrocene moieties were packed densely at random. On the basis of those results, it was demonstrated that surface modification of carbon substrates with diazonium could afford a dense monolayer similar to the self-assembled monolayer (SAM) formation.     

Use of UV-vis reflection spectroscopy for determining the organization of viologen and viologen tetracyanoquinodimethanide monolayers

UV-vis reflection spectroscopy has been used for proving in situ the organization of pure viologen and hybrid viologen tetracyanoquinodimethanide monolayers at the air-water interface. Other more classical measurements concerning Langmuir monolayers, including surface pressure-area and surface potential-area isotherms, are also provided. The organization of the viologen in the Langmuir monolayer was investigated upon the different states of compression, and the tilt angle of the viologen moieties with respect to the water surface was determined. A gradual transition of the viologen molecules from a flat orientation in the gas phase to a more tilted position with respect to the water surface in the condensed phases occurs. The addition of a tetracyanoquinodimethane (TCNQ) salt in the subphase leads to the penetration of TCNQ anions into the positively charged viologen monolayer forming a hybrid viologen tetracyanoquinodimethanide film where a charge-transfer interaction between the two moieties is observed. From a quantitative analysis of the reflection spectra, an organization model of these hybrid monolayers at the air-water interface is proposed, suggesting a parallel arrangement of viologen and TCNQ units with a 1:2 stoichiometry.     

Motion of redox molecules in solution monitored by the highly-sensitive EQCM technique

The behavior of redox molecules in solution that was not detected by electrochemical techniques was measured by a highly-sensitive electrochemical quartz crystal microbalance (EQCM) technique that has been improved in this study to obtain a high sensitivity of EQCM measurement in solution. The improved EQCM technique allowed to monitor the motion of a redox molecule, that is an access of the molecule to an electrode surface and repulsion from the surface during redox. An EQCM technique currently in use has measured adsorption of redox molecules on an electrode surface or polymerization on the surface caused by a chemical reaction following redox, which exhibits an enough large mass change response to detect with an EQCM measurement. However, access and repulsion of redox molecule, which is a slight motion of the molecule near on electrode surface, has not been detected and investigated by an EQCM technique, because the mass change response seems to be very small. In this study, the redox behavior of methyl viologen on a bare gold surface, pyridinethiol surface and methylpyridinethiol surface was investigated. Although the three electrodes give the same cyclic voltammogram of methyl viologen, the three are different in QCM response recorded at the same time as the voltammetry. Access/repulsion of methyl viologen within an electrical double layer was monitored by the highly-sensitive EQCM technique.     

Motion of redox molecules in solution monitored by the highly-sensitive EQCM technique

The behavior of redox molecules in solution that was not detected by electrochemical techniques was measured by a highly-sensitive electrochemical quartz crystal microbalance (EQCM) technique that has been improved in this study to obtain a high sensitivity of EQCM measurement in solution. The improved EQCM technique allowed to monitor the motion of a redox molecule, that is an access of the molecule to an electrode surface and repulsion from the surface during redox. An EQCM technique currently in use has measured adsorption of redox molecules on an electrode surface or polymerization on the surface caused by a chemical reaction following redox, which exhibits an enough large mass change response to detect with an EQCM measurement. However, access and repulsion of redox molecule, which is a slight motion of the molecule near on electrode surface, has not been detected and investigated by an EQCM technique, because the mass change response seems to be very small. In this study, the redox behavior of methyl viologen on a bare gold surface, pyridinethiol surface and methylpyridinethiol surface was investigated. Although the three electrodes give the same cyclic voltammogram of methyl viologen, the three are different in QCM response recorded at the same time as the voltammetry. Access/repulsion of methyl viologen within an electrical double layer was monitored by the highly-sensitive EQCM technique.     

Formation and electrochemical characterization of 6-thioguanosine monolayers on the mercury surface

The interfacial and electrochemical behavior of 6-thioguanosine-6-thioguanine riboside (6TGR)-on a hanging mercury drop electrode was studied with ac and cyclic voltammetry in a solution of 0.1 M Na(2)SO(4) and 0.01 M sodium acetate buffer at pH 4.3. A self-assembled monolayer (SAM) of chemisorbed 6TGR molecules formed under determined adsorption conditions was characterized. A low-density monolayer of chemisorbed 6TGR molecules and a condensed monolayer of physisorbed ones, which are successively formed by reduction of the SAM, were also studied.     

细胞色素c在经预处理的金电极上电化学行为的研究

本文观察到吸附态和本体态的细胞色素ｃ以经预处理的金电极上的准可逆反应。采用现场ＦＴＩＲ光谱法，紫外可见反射光谱法，循环伏安法，交流阻抗法和电位阶跃法研究了细胞色素ｃ吸附行为和反应动力学。     

Lipoic acid-palladium complex interaction with DNA, voltammetric and AFM characterization

The mechanism of interaction of lipoic acid-palladium complex (LAPd) with double-stranded DNA (dsDNA), as well as the adsorption process and the redox behaviour of LAPd, of its ligand lipoic acid (LA), and of the LAPd-containing dietary supplement, Poly-MVA™, were studied using atomic force microscopy (AFM) and voltammetry at highly oriented pyrolytic graphite (HOPG) and glassy carbon electrodes. In the presence of small concentrations of LAPd molecules, the dsDNA molecules appeared less knotted and bended, and more extended on the HOPG surface, when compared with the dsDNA molecules adsorbed from the same dsDNA solution concentration. The voltammetric results demonstrated the interaction of both LAPd and Poly-MVA™ with dsDNA, but no oxidative damage caused to dsDNA was detected. AFM images revealed different adsorption patterns and degree of surface coverage and correlation with the structure, the concentration of the solution, the applied potential, and the voltammetric behaviour of the LA, LAPd and Poly-MVA™ was observed. The application of a negative potential caused the dissociation of the LAPd complex and Pd(0) nanoparticle deposition, whereas the application of a positive potential induced the oxidation of the LAPd complex and the formation of a mixed layer of LA and palladium oxides.     

Effect of pH and applied potential on the adsorption of DNA on highly oriented pyrolytic graphite electrodes. Atomic force microscopy surface characterisation

Single-stranded and double-stranded DNA electrochemical biosensors prepared by adsorption during 3 min on HOPG, with or without an applied potential, at pH 5.3 and 7.0, were characterised by MAC mode AFM. During adsorption DNA condenses on the substrate forming complex network films with pores exposing the HOPG surface. The thin films formed in pH 5.3 acetate buffer always presented a better coverage of the HOPG surface with DNA molecules than films formed in pH 7.0 phosphate buffer. The application of a positive potential of 300 mV during adsorption enhanced the robustness and stability of the DNA films with the formation of bigger network holes and a more condensed and compact self-assembled DNA lattice. The knowledge of the morphology of adsorbed DNA on electrode surfaces explains non-specific adsorption on the electrode surface and can be used to improve and develop DNA-electrochemical biosensors.     

苄基紫精在玻碳电极上的电化学行为

本文用循环伏安法研究了苄基紫精(BV~(2+))在玻碳(GC)电极上的电化学行为。BV~(2+)在未活化的GC电极上的电极过程强烈地依赖于BV~(2+)浓度、扫描速度和电位范围。BV~(2+)在活化的GC电极上的吸附能力大为增强,当其浓度低时只表现出吸附BV~(2+)的电极过程,在高浓度下吸附BV~(2+)与溶液中的BV~(2+)同时参与电极过程。讨论了GC电极活化的可能影响。     

Electrochemistry of individual molecules in zeptoliter volumes

Electrochemical experiments were carried out in a nanometer-sized cylindrical thin layer cell (TLC) formed by etching the surface of a disk-type platinum nanoelectrode (5- to 150-nm radius). Using high frequency ac voltage, the surface of such an electrode was etched to remove a very thin (> or = 1-nm-thick) layer of Pt. The resulting zeptoliter-scale cavity inside the glass sheath was filled with aqueous solution containing redox species, and the etched electrode was immersed in a dry (no external solution) pool of mercury to produce a TLC. Several approaches based on steady-state voltammetry and scanning electrochemical microscopy (SECM) were developed to independently evaluate the electrode radius and the etched volume. The number of redox molecules in the TLC could be varied between one and a few hundred by changing its volume and solution concentration. In this way, the transition between a random and deterministic number of trapped molecules was observed. High quality steady-state voltammograms of > or = 1 molecules were obtained for different neutral and charged redox species and different concentrations of supporting electrolyte. The analysis of such voltammograms yields information about mass transfer, adsorption, electron transfer kinetics, and double-layer effects on the nanoscale.     

Electrochemical characterization of a mixed self-assembled monolayer of 6-thioguanine and guanine on a mercury electrode

A monolayer constituted by chemisorbed 6-thioguanine and physisorbed guanine molecules was formed on a hanging mercury drop electrode from deoxygenated solutions of 6-thioguanine (6TG) and guanine (G). The mixed monolayer was characterized by chronoamperometry, cyclic voltammetry, and phase-sensitive ac voltammetry under in situ conditions, and the experimental data revealed a compact packing of molecules in the film. Ex situ measurements in the presence of dissolved oxygen proved that the mixed monolayer is stable in solutions lacking 6TG and G.     

Potential-induced structure changes of oligopyridine adlayers on Au(111) electrodes

The structure of a bisterpyridine-like oligopyridine (abbreviated as 2,4'-BTP) monolayer on Au(111), adsorbed from an acetone solution, was studied by in situ scanning tunneling microscopy and cyclic voltammetry in aqueous 0.1 M H2SO4. Short-range ordered adsorption with an average distance between the individual molecules of about 2 nm was observed only at electrode potentials positive of +0.4 V vs SCE, whereas at more negative potentials, no order could be found. With the help of Cu underpotential deposition, a potential-induced, fast, and fully reversible structure transition within the organic monolayer was identified at about +0.4 V vs SCE. At negative potentials the molecules apparently cluster together and consequently current-potential curves resemble those for a bare gold surface, whereas for E>+0.4 V vs SCE the molecules are spread over the entire surface in a hexagonal, close-packed fashion. This may have interesting consequences for switching between different template structures.     

Voltammetry of adsorbed cancerostatic actinomycins

A systematic study of the adsorption and association of the cancerostatic drug actinomycin-C₁ (ACT) at a hanging mercury drop electrode (HMDE) has been conducted using phase-sensitive a.c. voltammetry and cyclic voltammetry (CV). At all bulk concentrations, the adsorbed layer is transformed into a condensed film by the significant stacking forces acting between adjacent rings of the phenoxazone residues. The nucleation and growth mechanism is confirmed and the data are analysed using the Avrami equation. The adsorption parameters for the condensed film were evaluated at various pH values. In addition, the preparative electrochemical reduction of ACT was performed using the large-scale electrolysis and differential pulse polarography. The consequences for DNA interaction and membrane adsorption are discussed.     

Electrochemical formation and investigation of a self-assembled [60]fullerene monolayer

The formation and characterisation of a C(60) monolayer at the electrode|electrolyte interface has been studied by cyclic voltammetry, potential step chronoamperometry and ac voltammetry. The presence of the monolayer is evidenced by the presence of a very sharp peak P in the voltammogram, attributed to the faradaic phase formation of an ordered monolayer, and of a reduction post peak Q associated with the reduction of adsorbed species. The chronoamperograms exhibit a well-defined maximum, characteristic of a nucleation and growth mechanism. By comparison with existing models of phase transitions, a progressive polynucleation and growth mechanism is demonstrated. The monolayer is proposed to consist of a 2D fulleride salt. It is suggested that the formation of the monolayer can take place for a broad range of solution compositions, but requires an atomically smooth substrate such as mercury.     

Co-adsorption of CO onto a Ag-modified Pt(111)--restructuring of a Ag UPD layer monitored by EC-STM

The effect of co-adsorption of CO on an underpotentially deposited (UPD) silver monolayer on a Pt(111) single crystal electrode in 0.05 M sulfuric acid is investigated for the first time by means of electrochemical scanning tunneling microscopy (EC-STM). Pure electrochemical experiments suggest that the co-adsorption of CO onto Pt single crystal electrodes previously modified by a monolayer of Ag, forces Ag atoms of the first UPD monolayer into a second adlayer. The present EC-STM studies reveal the formation of a large-area Ag network after the co-adsorption of CO. The resulting Ag nanostructures formed on wide Pt(111) terraces are approximately 0.5 nm high and 10 nm wide. The desorption of the newly formed second Ag adlayer, the oxidation of CO and the desorption of Ag atoms from the first adlayer are monitored by EC-STM and simultaneously detected in the corresponding CVs in three different oxidation peaks. EC-STM images recorded afterwards show the unchanged Pt surface. The presence of Ag on the surface leads to a downward shift of the onset of oxygen adsorption on the Pt(111) surface.     

Adsorption behavior of bis (2-ethylhexyl) sodium sulfosuccinate (AOT) at the mercury-electrolyte solution interface as a function of electrode potential and time

The dependence of the differential capacitance (C) of the electrode double layer of a hanging mercury drop electrode in bis (2-ethylhexyl) sodium sulfosuccinate (AOT) solutions on electrode potential (E) and time is measured using three-dimensional phase sensitive ac voltammetry. This methodology, possessing a very wide time window that permits a detailed study of the adsorption phenomena, is based on the reconstruction of C vs E curves, sampled after many phase-sensitive ac chronoamperometric experiments. The shape of these curves allows an estimation of the structure of the layer of AOT molecules absorbed at the electrode surface. AOT molecules form micelles in bulk solutions and they also associate in the charged interface under the strong influence of the electric field into surface aggregates which depend on their concentration and applied potential. The presence of AOT micelles in the bulk solution can be linked with the appearance of a surface film at potentials more negative than those corresponding to a condensed film linked with a capacitance value slightly higher than that normally attributed to a compact layer. The whole phenomenon is proved to be very dependant upon time.