Stability of Ferromagnetism in Fe, Co, and Ni Metals under High Pressure with GGA and GGA+U

The stability of the ferromagnetic state in Fe, Co, and Ni metals under high pressure is investigated using generalized gradient approximation (GGA) and GGA+U within the density functional theory (DFT). It is found that the ferromagnetic state under pressure is very different for Fe, Co, and Ni metals, and is closely associated with the crystal structure. In the case of Fe, a ferromagnetic bcc ground state is obtained at ambient pressure and a nonmagnetic hcp ground state is found at pressure around 12 and 115 GPa for GGA and GGA+U, respectively. For Co, the phase transition from a ferromagnetic hcp to a nonmagnetic fcc is found around 107 GPa for GGA. In contrast to Fe and Co, a ferromagnetic fcc state in Ni is maintained even at 200 GPa. The calculated results suggest that the suppression of ferromagnetism in Fe, Co, and Ni is due to pressure-induced decrease of the density of state at the Fermi level.     

Volume and structural study of Fe64Mn36 anti-ferromagnetic Invar alloy under high pressure

We have investigated the pressure variation of the volume and structure of an FCC Fe₆₄Mn₃₆ anti-ferromagnetic Invar alloy. The inclination of the pressure-volume (P-V) curve of the FCC structure becomes discontinuous at a pressure of 4 GPa. According to the bulk modulus at zero pressure estimated by the Birch-Murnaghan equation of state, the pressure between 4 and 10 GPa is 33 GPa larger than that at a pressure below 4 GPa. Considering previous experiments on magnetism at high pressure the Neel temperature at 4 GPa almost decreases to room temperature. These results suggest that the increase in the bulk modulus by 33 GPa can be attributed to the pressure-induced magnetic phase transition from anti-ferromagnetism to paramagnetism. Volume at zero pressure was estimated using the Birch-Murnaghan equation of state. The volume of FCC structure in the anti-ferromagnetic state was 1.17% larger than the volume in the paramagnetic state, namely, the spontaneous magnetostriction was 1.17%. Pressure-induced structural transition from FCC to HCP occurs with an increase in the pressure, especially at up to 5 GPa. The value of c/a is 1.62; this value almost corresponds to that of an ideal HCP structure. The bulk modulus of the HCP structure estimated by the Birch-Murnaghan equation of state is larger than that of the FCC structure, and the volume/atom ratio is smaller than that of the FCC structure.     

Structural and thermodynamic properties of WB at high pressure and high temperature

The structure parameters and electronic structures of tungsten boride (WB) have been investigated by using the density functional theory (DFT). Our calculating results display the bulk modulus of WB are 352±2 GPa (K′₀=4.29) and 322±3 GPa (K′₀=4.21) by LDA and GGA methods, respectively. We have analyzed the probable reason of the discrepancy from the bulk modulus between theoretical and experimental results. The compression behavior of the unit cell axes is anisotropic, with the c-axis being more compressible than the a-axis. By analyzing the bond lengths information, it also demonstrated that WB has a lower compressibility at high pressure. From the partial densities of states (PDOS) of WB, we found that the Fermi lever is mostly contributed by the d states of W atom and p states of B atom and that the contributions from the s, p states of W atom and s states of B atom are small. Moreover, using the Gibbs 2 program, the thermodynamic properties of WB are obtained in a wide temperature range at high pressure for the first time in this work.     

On the possibility of a phonon mediated transport anomaly in MgB2 under compression

Results of electrical resistance measurements on MgB₂ at ambient temperature up to 25 GPa are presented. An abrupt reduction of nearly 30% in resistance around 18 GPa is observed. Band structure calculations in the presence of a frozen-in distortion of the E_2g phonon mode reveal that one of the closed Fermi sheets corresponding to the σ-band opens along the Γ-A direction at this pressure. It is suggested that the anomaly observed in the resistance is due to this phonon mediated electronic topological transition (ETT).     

First-principles study on electronic structure and elastic properties of Fe16N2

We have performed first-principles study on structural stability, elastic properties and electronic structure of Fe₁₆N₂ by applying LSDA+U method. The calculated values of formation energy and reaction enthalpy for decomposition reaction indicate that Fe₁₆N₂ is a thermodynamically stable phase at the ground state. The six independent elastic constants are derived and the bulk modulus, Young's modulus, shear modulus, and Poisson's ratio are determined as 180 GPa, 199 GPa, 76 GPa and 0.32, respectively. The elastic constants meet all the mechanical stability criteria. The ductility of Fe₁₆N₂ is predicted by Pugh's criterion. The strong bonding between Fe and N atoms results in high values of elastic constants C₁₁ and C₃₃, and contributes to the strengthening of the Fe₁₆N₂ structural stability. The total and partial densities of states (DOS) suggest the existence of hybridization between N-p and Fe-d bands. The position of the Fermi level in DOS curve implies that Fe₁₆N₂ is a metastable phase.     

Fermi surface and metallic properties of graphite at high pressures

A potential of superconductivity of pure graphite has been theoretically examined. At normal pressure, the carrier concentration is too low to exhibit superconductivity. On applying pressure, the band dispersion along the c-axis is significantly enhanced, resulting in an increase in the carrier concentration; 10²⁰ cm^-3 at p=30 GPa. This is favorable to observe superconductivity. Accurate Fermi surfaces are illustrated: a new Fermi surface appears around K point at p=25 GPa.     

Electronic structure and structural stability of LaAl2 and LaAl3—A comparative study

The large structural stability regime of LaAl₂ and LaAl₃ as a function of pressure is investigated by the band structure calculations using the FP-LAPW method. An earlier experimental study has revealed that there is no structural phase transition at ∼35 and ∼30 GPa for LaAl₂ and LaAl₃, respectively. Our calculations indicate that in the density of states curve of LaAl₂, the Fermi level (E_F) lies in a slope between bonding maxima and antibonding minima. At high pressures the E_F moves slightly towards the valley, but this shifting does not affect its structural stability. In LaAl₃, the E_F falls in a flat region in the density of states and does not move even up to 33 GPa. The band dispersion curves for both the compounds show movement of bands under the influence of pressure. Some of them cross the Fermi level leading to so called Lifshitz transitions. However, it is seen that these electronic changes do not manifest into any volume anomaly in LaAl₃ under pressure. Our study clearly shows that the density of states behavior for LaAl₂ and LaAl₃ satisfies the Yamashita-Asano criterion for structural stability. The theoretical equations of state, bulk modulus and its pressure derivative values are compared with the experimental values.     

X-ray diffraction study of molybdenum diselenide to 35.9 GPa

In situ high-pressure angle dispersive synchrotron X-ray diffraction studies of molybdenum diselenide (MoSe₂) were carried out in a diamond-anvil cell to 35.9 GPa. No evidence of a phase transformation was observed in the pressure range. By fitting the pressure-volume data to the third-order Birch-Murnaghan equation of state, the bulk modulus, K_0T, was determined to be 45.7±0.3 GPa with its pressure derivative, K′_0T, being 11.6±0.1. It was found that the c-axis decreased linearly with pressure at a slope of −0.1593 when pressures were lower than 10 GPa. It showed different linear decrease with the slope of a −0.0236 at pressures higher than 10 GPa.     

Phase stability,elastic, electronic,thermal and optical properties of Ti3Al1−xSixC2 (0≤x≤1): First principle study

The structural parameters with stability upon Si incorporation and elastic, electronic, thermodynamic and optical properties of Ti₃Al_1−xSi_xC₂ (0≤x≤1) are investigated systematically by the plane wave pseudopotential method based on the density functional theory (DFT). The increase of some elastic parameters with increasing Si-content renders the alloys to possess higher compressive and tensile strength. The Vickers hardness value obtained with the help of Mulliken population analysis increases as x is increased from 0 to 1. The solid solutions considered are all metallic with valence and conduction bands, which have a mainly Ti 3d character, crossing the Fermi level. The temperature and pressure dependences of bulk modulus, normalized volume, specific heats, thermal expansion coefficient, and Debye temperature are all obtained through the quasi-harmonic Debye model with phononic effects for T=0−1000 K and P=0−50 GPa. The obtained results are compared with other results available. Further an analysis of optical functions for two polarization vectors reveals that the reflectivity is high in the visible–ultraviolet region up to ∼10.5 eV region showing promise as a good coating material.     

Mechanism of formation of cellular dislocation structures during propagation of intense shock waves in crystals

The mechanism of formation of a cellular dislocation structure in face-centered cubic (fcc) metal crystals subjected to shock compression at strain rates \(\dot \varepsilon \) > 10⁶ s^?1 has been considered theoretically within the dislocation kinetic approach based on the kinetic equation for the dislocation density (dislocation constitutive equation). A dislocation structure of the cellular type is formed in the case of a two-wave structure of the compression wave behind its shock front (elastic precursor). It has been found that, at pressures σ > 10 GPa, the dislocation cell size Λ _c depends on the pressure σ and the density ρ _G of geometrically necessary dislocations generated at the shock front according to the relationship Λ _c ～ ρ _G ^?n ～ σ^?m , where n = 1/4–1/2, m = 3/4–3/2, and m = 1, for different pressures and orientations of the crystal. It has been shown that, in copper and nickel crystals with the shock loading axis oriented along the [001] direction, the cellular structure is not formed after reaching the critical pressures σ _c equal to 31 and 45 GPa, respectively.     

Structure and high pressure behaviour of organic crystals based on aromatically substituted 1,3,4-oxadiazoles

The crystalline structure of a new compound containing the 1,3,4-oxadiazole moiety, 4-(5-methyl-1,3,4-oxadiazole-2yl-)-N,N′-dimethyl-phenylamine (MODPA) was determined. It shows a monoclinic structure with space group P2₁/c and lattice parameters: a=1.02997(6), b=0.64840(4), c=1.58117(10) nm and β=99.4820(10)°. To study the intermolecular interactions in oxadiazole containing organic crystals, X-ray studies on MODPA and 2,5-diphenyl-1,3,4-oxadiazole (DPO) were performed up to 5 GPa at room temperature. The Murnaghan equation of state is used to describe the compression behaviour of both substances. From these results, the bulk modulus and its pressure derivative were determined. The values obtained are: K₀=6.3 GPa and K′₀=6.8 for MODPA and K₀=7.3 GPa and K′₀=6.7 for DPO. Additionally, measurements under increasing temperature at ambient pressure were carried out to evaluate the thermal expansion coefficient: α=1.8×10⁻⁴ K⁻¹ for MODPA and α=1.9×10⁻⁴ K⁻¹ for DPO.     

The v10=1 Level of Propyne, H3CCCH, and Its Interactions with v9=1 and v10=2

Almost 300 new rotational transitions within the fundamental vibrational level v₁₀=1 of propyne have been measured in selected regions between 495 and 925 GHz spanning the quantum numbers 28≤J≤54 and 0≤K≤16. The accuracies are mostly between 10 and 20 kHz. In addition, the J″=4 and 5 transitions near 85 and 103 GHz have been remeasured. Simultaneous analyses with refined rovibrational data have been performed, showing that even this lowest and seemingly isolated vibrational level needs a global treatment when high K transitions are involved. The global model with the v₁₀=1 level coupled to the next higher cluster of levels, v₁₀=2/v₉=1, by Fermi and Coriolis resonances is necessary for a quantitative reproduction of both the rovibrational and rotational data within their experimental uncertainties. Included are also improved ground state spectroscopic parameters from a fit of previous pure rotational data and Δk=3 ground state combination loops as well as additional data obtained in course of the present study.     

Simulated equation of state of CaF2 with fluorite-type structure at high temperature and high pressure

The pressure-volume-temperature (P-V-T) equation of state (EOS), isothermal bulk modulus, and thermal expansivity of CaF₂ with cubic fluorite-type structure are investigated using the constant temperature and pressure shell model molecular dynamics (MD) method with effective pair potentials which consist of the Coulomb, dispersion, and repulsion interaction. It was shown that MD simulation is very successful in accurately reproducing the measured volumes of the CaF₂ over a wide range of pressures. The simulated P-V data matched X-ray diffraction experimental results up to 9.5 GPa at 300 K. In addition, volume thermal-expansion coefficient and isothermal bulk modulus were also calculated and compared with available experimental data and the latest theoretical results at ambient condition. At extended temperature and pressure ranges, The P-V EOS under different isotherms at selected temperatures, T-V EOS under different isobars at selected pressures, thermal expansivity, and isothermal bulk modulus were predicted up to 1500 K and 10 GPa. The detailed knowledge of thermodynamic behavior and EOS at extreme conditions are of fundamental importance to the understanding of the physical properties of CaF₂.     

Pressure induced phase transformations and band structure of different high pressure phases in tellurium

We report here high-pressure x-ray diffraction (XRD) studies on tellurium (Te) at room temperature up to 40 GPa in the diamond anvil cell (DAC). The XRD measurements clearly indicate a sequence of pressure-induced phase transitions with increasing pressure. The data obtained in the pressure range 1 bar to 40 GPa fit five different crystalline phases out of Te: hexagonal Te (I) → monoclinic Te(II) → orthorhombic Te (III) → Β-Po-type Te(IV) → body-centered-cubic Te(V) at 4, 6.2, 11 and 27 GPa, respectively. The volume changes across these transitions are 10%, 1.5%, 0.3% and 0.5%, respectively. Self consistent electronic band structure calculations both for ambient and high pressure phases have been carried out using the tight binding linear muffin tin orbital (TB-LMTO) method within the atomic-sphere approximation (ASA). Reported here apart from the energy band calculations are the density of states (DOS), Fermi energy (E _f) at various high-pressure phases. Our calculations show that the ambient pressure hexagonal phase has a band gap of 0.42 eV whereas high-pressure phases are found to be metallic. We also found that the pressure induced semiconducting to metallic transition occurs at about 4 GPa which corresponds to the hexagonal phase to monoclinic phase transition. Equation of state and bulk modulus of different high-pressure phases have also been discussed.     

Asymptotic correlation functions and FFLO signature for the one-dimensional attractive spin-1/2 Fermi gas

We investigate the long distance asymptotics of various correlation functions for the one-dimensional spin-1/2 Fermi gas with attractive interactions using the dressed charge formalism. In the spin polarized phase, these correlation functions exhibit spatial oscillations with a power-law decay whereby their critical exponents are found through conformal field theory. We show that spatial oscillations of the leading terms in the pair correlation function and the spin correlation function solely depend on ΔkF and 2ΔkF, respectively. Here ΔkF=π(n_↑−n_↓) denotes the mismatch between the Fermi surfaces of spin-up and spin-down fermions. Such spatial modulations are characteristics of a Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) state. Our key observation is that backscattering among the Fermi points of bound pairs and unpaired fermions results in a one-dimensional analog of the FFLO state and displays a microscopic origin of the FFLO nature. Furthermore, we show that the pair correlation function in momentum space has a peak at the point of mismatch between both Fermi surfaces k=ΔkF, which has recently been observed in numerous numerical studies.     

Equation of state and thermal stability of Al3BC

The lattice parameters of Al₃BC have been measured up to 5 GPa at ambient temperature using energy-dispersive X-ray powder diffraction with synchrotron radiation. A fit to the experimental p-V data using Birch-Murnaghan equation of state gives values of the Al₃BC bulk modulus 116(4) GPa and its first pressure derivative 9(2). In the 1.6-4.8 GPa range at temperatures above 1700 K Al₃BC undergoes incongruent melting that results in the formation of Al₃BC₃, AlB₂ and liquid aluminum.     

The influence of out-of-plane disorder on the formation of pseudogap and Fermi arc in Bi2Sr2−xRxCuOy (R=La and Eu)

We found that the length of the Fermi arc decreases with increasing out-of-plane disorder by performing angle resolved photoemission spectroscopy (ARPES) measurements in the superconducting state of optimally doped R=La and Eu samples of Bi₂Sr_2−xR_xCuO_y. Since out-of-plane disorder stabilizes the antinodal pseudogap as was shown in our previous study of the normal state, the present results indicate that this antinodal pseudogap persists into the superconducting state and decreases the Fermi arc length. We think that the shrinkage of the Fermi arc reduces the superfluid density, which explains the large suppression of the superconducting transition temperature when out-of-plane disorder is increased.     

Investigations of meta-stable and post-spinel silicon nitrides

Since the discovery of post-spinel Si₃N₄, its fundamental physical properties are highly required. In this paper, theoretical calculations are performed to investigate the structural and elastic properties of the β-, γ-, wII- and post-spinel Si₃N₄ polymorphs. The calculated ground-state properties compare well with available experiments. The phase transformations of the β-, γ-, wII- and post-spinel phases are investigated by the famous plane-wave pseudo-potential density functional theory. From the elastic constants obtained, we find that β-, γ- and wII-Si₃N₄ are stable at 0 GPa and the post-spinel phase is unstable/stable at 0 GPa/160 GPa. When the high-temperature β→γ transformation is bypassed due to kinetic reasons, β-Si₃N₄ is predicted to undergo a first-order phase transition to a new phase (wII-Si₃N₄). It is found that the transition pressures of β→wII and γ→post-spinel transitions are 20.8 GPa and 152.5 GPa, respectively. The phase boundary of the γ→post-spinel transition can be described as P=152.3631−6.39×10⁻³T+2.01062×10⁻⁵T²−1.93962×10⁻⁹T³. Through the quasi-harmonic approximation, the dependences of heat capacity, entropy, thermal expansion coefficient and the Debye temperature on temperature, are also successfully predicted.     

X-ray diffraction investigation of the hexagonal-fcc structural transition in yttrium trihydride under hydrostatic pressure

Pressure induced structural transition of yttrium hydride has been investigated using synchrotron radiation X-ray diffraction measurement up to 24 GPa at room temperature. A reversible hexagonal-fcc transition with a wide intermediate region from 11 to 20 GPa is confirmed, which is consistent with previously reported X-ray results. The diffraction patterns measured for the intermediate state are not interpreted in terms of a hexagonal-fcc coexisting state or as rare-earth structures with various metal-layer stacking sequences. The equation of state determined for the hexagonal-YH₃ provides a bulk modulus B₀ of 71.9 GPa, which is nearly half of the previously reported value, but is within the range of values reported for other rare-earth metal trihydrides with hexagonal structures.