Production of micron-sized monodispersed core/shell polymethyl methacrylate/polystyrene particles by seeded dispersion polymerization

 Micron-sized monodispersed polymethyl methacrylate (PMMA)/polystyrene (PS) (PMMA/PS=2/1, wt ratio) composite particles consisting of PMMA-core and PS-shell were successfully produced by seeded dispersion polymerization of styrene in a methanol/water medium in the presence of about 2 μm-sized monodispersed PMMA particles. From the view point of thermodynamic equilibrium, such a morphology is difficult to form by usual seeded polymerization in a polar medium such as water. It is concluded that seeded dispersion polymerization in which almost all monomers and initiators exist in the medium has an advantage to produce core/shell polymer particles in which polymer layers accumulate in their order of the production regardless of the hydrophobicity of polymers, because of high viscosity in polymerizing particles. Received: 9 December 1996 Accepted: 26 February 1997     

Production of micron-sized monodispersed core/shell composite polymer particles by seeded dispersion polymerization

 The effect of the weight ratio of seed polymer/monomer on the morphology of the poly(methyl methacrylate) (PMMA)/polystyrene (PS) monodispersed composite particles produced by batch seeded dispersion polymerization of styrene with 1.64-μm-sized monodispersed PMMA seed particles in a methanol/water medium (4/1 w/w) was examined. In the PMMA/PS weight ratios of 3/1 and 2/1, the composite particles had a clear morphology consisting of a PMMA core and a PS shell. In the ratio of 1/1, a lot of small PS domains were observed in the PMMA core though the PS shell was still formed. By stepwise addition of styrene monomer, the formation of the small PS domain was depressed and complete core/shell morphology was formed. Absorption/release treatments of toluene into/from the PMMA/PS (1/1 w/w) composite particles resulted in a drastic morphological change from the core/shell structure to a multi- layered one. Received: 2 February 1999 Accepted in revised form: 7 April     

Production of electrically conductive, core/shell polystyrene/polyaniline composite particles by chemical oxidative seeded dispersion polymerization

Micron-sized, monodispersed, electrically conductive polystyrene (PS)/polyaniline (PAn) composite particles were produced by chemical oxidative seeded dispersion polymerization of aniline at 0 °C with 1.37-μm-sized, monodispersed PS seed particles in HCl aqueous solution, where the pH value was kept at 2.5 with a pH stat. The composite particles consisted of a PS core and a PAn shell. A pellet of the composite particles had a conductivity of 3.4 × 10⁻³ S/cm. Received: 5 April 2000 Accepted: 10 August 2000     

Production of core/shell polystyrene/poly(3,5-xylidine) composite particles by chemical oxidative seeded dispersion polymerization

Micron-sized monodispersed polystyrene (PS)/poly(3,5-xylidine) (PXy) composite particles were produced by chemical oxidative seeded dispersion polymerization of 3,5-xylidine at 20 °C with 1.6-μm-sized monodispersed PS seed particles in HCl aqueous solution, the pH of which was always kept at 2.5 with a pH stat. The composite particles produced consisted of a PS core and a PXy shell. Received: 16 December 1998 Accepted in revised form: 25 March 1999     

Morphology of micron-sized monodispersed composite polymer particles produced by seeded polymerization for the dispersion of highly monomer-swollen polymer particles

 Monodispersed polystyrene (PS)/poly(n-butyl methacrylate) (PBMA) composite particles having 9.4 μm in diameter were produced by seeded polymerization for the dispersion of highly n-butyl methacrylate (BMA)-swollen PS particles, and their morphologies were examined. The highly BMA-swollen PS particles (about 150 times the weight of the PS seed particles) were prepared by mixing monodispersed 1.8 μm-sized PS seed particles and 0.7 μm sized BMA droplets prepared with an ultrasonic homogenizer in ethanol/water (1/2, w/w) medium at room temperature. After NaNO₂ aqueous solution as inhibitor was added in the dispersion, the seeded polymerization was carried out at 70 °C. In an optical microscopic observation, one or two spherical high contrast regions which consisted mainly of PS were observed inside PS/PBMA composite particles. In the PS domain, there were many fine spherical PBMA domains. Such morphologies were based on the phase separation of PS and PBMA within the homogeneous swollen particles during the seeded polymerization. Received: 04 June 1997 Accepted: 27 August 1997     

Preparation of micron-sized, monodispersed, “onion-like” multilayered poly(methyl methacrylate)/polysterene composite particles by reconstruction of morphology with the solvent-absorbing /releasing method

Micron-sized, monodispersed, “onion-like” multilayered poly(methyl methacrylate) (PMMA)/polystyrene (PS) (1/1, w/w) composite particles were prepared by the solvent-absorbing/releasing method (SARM). The viscosity within toluene-swollen composite particles, the release rate of toluene therefrom, the PMMA/PS ratio, and the kind of solvent had great influences on the reconstruction of the morphology of the PMMA/PS composite particles by the SARM. From these results, the conditions for the preparation of the multilayered composite particles by the SARM are clarified. Received: 28 September 2000 Accepted: 27 October 2000     

Preparation of micron-sized monodispersed highly monomer- “adsorbed” polymer particles having snow-man shape by utilizing the dynamic swelling method with tightly cross- linked seed particles

Micron-sized, monodispersed highly styrene-“adsorbed” particles having snow-man shape were prepared by the dynamic swelling method (DSM) with tightly cross-linked polymer seed particles as follows. First, 3.8 μm-sized monodispersed polystyrene (PS)/ poly(divinylbenzene) (PDVB) (PS/PDVB = 1/10 wt. ratio) composite particles produced by seeded polymerization utilizing DSM were dispersed in an ethanol/water (6/4, w/w) solution dissolving styrene monomer, and poly(vinyl alcohol) as a stabilizer. Second, water was subsequently added to the dispersion with a micro-feeder at a rate of 2.88 ml/h at room temperature. The cross-linked seed particles adsorbed a large amount of styrene onto the surfaces and resulted in mono-dispersed highly styrene-“adsorbed” snow-man shape particles having about 10 μm in diameter. Received: 16 April 1998 Accepted: 9 June 1998     

Morphologies of micron-sized monodispersed composite polymer particles having crosslinked structures produced by seeded polymerizations

Three kinds of micron-sized monodispersed polystyrene (PS)/ poly(styrene - divinylbenzene) composite particles were produced by two kinds of seeded copolymerizations of styrene (S) and divinylbenzene (DVB) (PS seed/ (S+DVB)=2/1, wt. ratio; S/DVB=1/1, molar ratio) in the presence of about 2 μm-sized monodispersed PS particles, and their morphologies were examined. One was produced by a seeded dispersion copolymerization where almost monomers and initiators exist in an ethanol/water (12.6/4.0, w/w) medium. The others two were produced by seeded copolymerizations with the dynamic swelling method where almost monomers exist in the monomer-swollen particles using 2, 2'-azobisisobutyronitrile in monomer-swollen PS seed particles or using 4, 4'-azobis (4-cyanopentanoic acid) in an ethanol/water (7/43, w/w) medium. In the former polymerization, the produced composite particles had a high dense crosslinked shell, whereas in the latter two polymerizations, they did the comparatively homogeneous crosslinked structures.     

Micron-sized monodispersed polymer particles produced by seeded polymerization for the dispersion of high swelling of polymer particles with a large amount of monomer

 Micron-sized monodispersed polystyrene (PS)/poly(n-butyl methacrylate) composite particles were produced as follows. First, 1.77 μm-sized monodispersed PS seed particles produced by dispersion polymerization were dispersed in ethanol/water (1/2, w/w) medium dissolving poly(vinyl alcohol) as a stabilizer. n-Butyl methacrylate (BMA) monomer dissolving benzoyl peroxide initiator was emulsified in ethanol/water (1/2, w/w) solution of sodium dodecyl sulfate as emulsifier with ultrasonic homogenizer, and the BMA monomer emulsion was mixed with the PS seed emulsion. The PS seed particles absorbed with a large amount of BMA (about 150 times weight of the seed particles) for 2 h to about 10 μm in diameter while keeping good monodispersity and BMA droplets disappeared finally. The seeded polymerization was carried out at 70 °C after a certain amount of water was added to depress the redissolving of BMA from the swollen particles into the medium by raising from room temperature to the polymerzation temperature. Received: 21 February 1996 Accepted: 4 September 1996     

Preparation of Composite Polymer Particles by Seeded Dispersion Polymerization in Ionic Liquids

Summary: Submicron-sized monodisperse PS particles were prepared by dispersion polymerization of styrene in ionic liquids with poly(vinylpyrrolidone) as stabilizer. Seeded dispersion polymerization of MMA was subsequently carried out with PS seeds in [Bmim][BF₄] to prepare PS/PMMA composite particles. Observation of the obtained particles of ultrathin cross-sections with a scanning and transmission electron microscope revealed that no secondary nucleation occurred during the seeded dispersion polymerization and that the particles have a core-shell morphology consisting of a PS core and a PMMA shell. Successful preparation of PS/PMMA composite particles in an ionic liquid has thus been demonstrated. Moreover, PS/PAA (PS-core/PAA-shell) composite particles were prepared by seeded dispersion polymerization in [DEME][TFSI], illustrating that hydrophobic/hydrophilic composite particles can be readily prepared in the ionic liquid.     

Influence of the swelling state of seed polymer particles with monomer on the morphology of micron-sized monodispersed composite polymer particles produced by seeded polymerization utilizing the dynamic swelling method

 Micron-sized mono-dispersed polystyrene (PS)/poly(n-butyl methacrylate) (PBMA) composite particles (PS/PBMA=2/1 by weight) having a heterogeneous structure in which many fine PBMA domains dispersed in a PS matrix near the particle surface were produced by seeded polymerization of n-butyl methacrylate (BMA) of which almost all had been absorbed by 1.8 μm-sized monodispersed PS seed particles utilizing the dynamic swelling method. The morphology was varied by changing the PS/BMA ratio and polymerization temperature. It was concluded that the swelling state of 2 μm-sized BMA-swollen PS particles in the seeded polymerization process is one of the important factors to control the morphology of the composite particles. Received: 27 November 1996 Accepted: 21 March 1997     

Effect of graft polymer on the formation of micron-sized,monodisperse, "onion-like" alternately multilayered poly(methyl methacrylate)/polystyrene composite particles by reconstruction of morphology with the solvent-absorbing/releasing method

Some factors contributing to the formation of an alternately multilayered structure of micron-sized, monodisperse poly(methyl methacrylate) (PMMA)/polystyrene (PS) (1/1, w/w) composite particles by reconstruction of the morphology with the solvent-absorbing/releasing method (SARM) were discussed. The original composite particles, which were produced by seeded dispersion polymerization (SDP) of styrene, had a core–shell structure. When PS/PMMA (1/1, w/w) composite particles produced by SDP of methyl methacrylate were treated by the SARM with toluene, the reconstructed morphology of the composite particles was not the multilayered structure but a hemisphere (or core–shell). The PS/PMMA composite particle contained less than 10 wt% PMMA- g-PS. On the other hand, the PMMA/PS composite particles contained about 40 wt% graft polymer. The graft polymer would exist at the interfaces of the alternate multilayers and decrease their interfacial energy. This was the main reason why the alternately multilayered structure was constructed by the SARM, though the total interfacial area between PMMA and PS layers in the multilayered particle is much larger than that of the hemisphere (or core–shell).     

Composite polymer particles with stimuli-responsive surface properties and specific activity of adsorbed/released trypsin

Micron-sized monodispersed stimuli-responsive polys’ (PS)/poly(2-dimethylaminoethyl methacrylate-N-isopropyl acrylamide-ethylene glycol dimethacrylate) [P(DM-NIPAM-EGDM)] composite polymer particles were prepared by seeded copolymerisation of DM, NIPAM and EGDM with PS seed particles. Adsorption behaviour of trypsin suggested that composite particles surface has both temperature- and pH-responsive swelling–deswelling characteristics. The performance of composite polymer particles as a carrier for biomolecules in adsorption/release experiments was evaluated by measuring the specific activities of adsorbed trypsin as a function of temperature and pH.     

Morphology of micron-sized monodispersed poly(butyl methacrylate)/polystyrene composite particles produced by seeded dispersion polymerization

In order to develop the seeded dispersion polymerization technique for the production of micron-sized monodispersed core/shell composite polymer particles the effect of polymerization temperature on the core/shell morphology was examined. Micron-sized monodispersed composite particles were produced by seeded dispersion polymerizations of styrene with about 1.4-μm-sized monodispersed poly(n-butyl methacrylate) (Pn-BMA) and poly(i-butyl methacrylate) (Pi-BMA) particles in a methanol/water (4/1, w/w) medium in the temperature range from 20 to 90 °C. The composite particles, PBMA/polystyrene (PS) (2/1, w/w), consisting of a PBMA core and a PS shell were produced with 2,2′-azobis(4-methoxy-2,4-dimethyl valeronitrile) initiator at 30 °C for Pn-BMA seed and with 2,2′-azobis(isobutyronitrile) initiator at 60 °C for Pi-BMA seed. The polymerization temperatures were a little above the glass-transition temperatures (T _g) of both Pn-BMA (20 °C) and Pi-BMA (40 °C). On the other hand, when the seeded dispersion polymerizations were carried out at much higher temperatures than the T _g of the seed polymers, composite particles having a polymeric oil-in-oil structure were produced. Received: 14 October 1998 Accepted in revised form: 2 June 1999     

Influence of particle diameter on the morphology of micron-sized, monodispersed composite polymer particles produced by seeded polymerization for the dispersion of highly monomer-swollen polymer particles

 Micron-sized, monodispersed polystyrene (PS)/poly (n-butyl methacrylate) (PBMA) composite particles, in which the PS domain(s) were dispersed in a PBMA continuous phase, were produced by seeded polymerization for dispersions of n-butyl methacrylate (BMA) swollen PS particles in a wide range of PS/BMA ratios in the presence of NaNO₂ as a water-soluble inhibitor. Moreover, in order to change the diameter of the composite particles at same PS/BMA ratio, PS/PBMA (1/150 w/w) composite particles were produced using five kinds of PS particles in a range of diameters from 0.64 to 3.27 μm as seeds. The percentages of the PS/PBMA composite particles having double and triple and over PS domains, which were thermodynamically unstable morphologies, increased with the increase in the diameter of BMA swollen PS particles. There was a clear influence of the size of the swollen particles on the morphology of the PS/PBMA composite particles produced. Received: 30 September 1999/Accepted: 18 April 2000     

Production of micron-sized, monodisperse composite polymer particles having epoxy groups by seeded dispersion polymerization

 Micron-sized, monodisperse polystyrene (PS)/glycidyl methacrylate–divinylbenzene copolymer core/shell composite particles having epoxy groups in the shells were produced by seeded dispersion copolymerization of glycidyl methacrylate and divinylbenzene in an ethanol/water medium with 1.65-μm-sized, monodisperse PS seed particles. By chemical modifications of epoxy groups with sodium hydrogensulfite and dimethylamine, composite polymer particles having sulfonate and dimethylamino groups, respectively, in the shells were prepared. Received: 13 September 2000 Accepted: 31 January 2001     

Synthesis of submicron-sized peanut-shaped poly(methyl methacrylate)/polystyrene particles by seeded soap-free emulsion polymerization

Submicron-sized peanut-shaped poly(methyl methacrylate)/polystyrene(PMMA/PS) particles were successfully synthesized by seeded soap-free emulsion polymerization of styrene on the spherical crosslinked PMMA seed particles.The obtained peanut-shaped particles showed a novel internal morphology:PS phase formed one domain which linked to the other domain having PMMA core encased by PS shell.     

Formation mechanism of micron-sized monodispersed polymer particles having a hollow structure

 Recently, the authors reported that micron-sized monodispersed cross-linked polymer particles having a single hollow in the inside were produced by seeded polymerization for the dispersion of (toluene/divinylbenzene)-swollen polystyrene (PS) particles prepared utilizing the dynamic swelling method which the authors had proposed. In this article, the particles at various conversions of the seeded polymerization were observed with an optical microscope in detail. From the obtained results, the formation mechanism of the hollow structure is suggested as follows. As seeded polymerization proceeds, poly-divinylbenzene (PDVB) molecules precipitated in the swollen particle are trapped near the interface and gradually pile at the inner surface, which results in a cross-linked PDVB shell. PS which dissolves in the swollen particles is repelled gradually to the inside. After the completion of the polymerization, toluene in the hollow evaporates by drying, and PS clings to the inner wall of the shell uniformly. Received: 14 February 1997 Accepted: 16 April 1997     

Preparation and application of cross-linked core-shell PBA/PS and PBA/PMMA nanoparticles

This paper reports the preparation of cross-linked core-shell poly(butyl acrylate)/polystyrene (PBA/PS) and poly(butyl acrylate)/poly(methyl methacrylate) (PBA/PMMA) nanoparticles via seeded emulsion polymerization and their application in nylon-based composites. A highly cross-linked structure was formed in both the cores and the shells by using a cross-linking agent, which could prevent the migration of hydrophobic PS shells to the inside of particles. There were covalent bonds on the interfaces between the cores and the shells of both particles. The average particle sizes were 40–50 nm, and the size distributions were narrow. The kinetics of polymerization was investigated. Well-defined core-shell structure and narrow particle size distribution could be achieved under starved conditions of monomer feeding. Furthermore, PBA/PMMA particles were used to fill nylon 6, good dispersion was obtained because of the strong interfacial interaction between the nanoparticles and the nylon 6 matrix and the good deformation ability of nanoparticles, and the toughness and rigidity of the composites were improved evidently. __________ Translated from Acta Polymerica Sinica, 2005, (6) (in Chinese)     

Influences of the locations of monomer and initiator in the seeded polymerization systems on the morphologies of micron-sized monodispersed composite polymer particles

Three kinds of micron-sized monodispersed polystyrene (PS)/poly(n-butyl methacrylate) (PBMA) composite particles (PS/BMA=2/1, wt. ratio) were produced by two kinds of seeded polymerizations ofn-butyl methacrylate (BMA) in the presence of about 2 m-sized monodispersed PS particles, and their morphologies were examined. One was produced by a seeded dispersion polymerization where almost monomers and initiators exist in an ethanol/water (1/1, w/w) medium. The others two were produced by seeded polymerizations utilizing the dynamic swelling method, where almost monomers exist in the PS seed particles, with 2,2-azobisisobutyronitrile initiator in the monomer-swollen particles and with 2,2-azobis [2-(2-imidazolin-2-yl)propane] initiator in an ethanol/water (1/5, w/w) medium. In the former polymerization, the produced composite particles had a core-shell structure consisting of a PS-core and a PBMA-shell, whereas in the latter two polymerizations, they had a POO (Polymeric Oil-in-Oil) structure consisting of a PS-matrix and many PBMA-domains, regardless of the location of initiator in the systems. From these results, it is concluded that the location of BMA monomer in the seeded polymerization systems with micron-sized monodispersed PS seed particles greatly affects the morphologies of produced PS/PBMA composite particles.Part CLI of the series Studies on Suspension and Emulsion