Organogermyl,Organostannyl, and Organoplumbyl Phosphines,Arsines, Stibines,and Bismuthines

The preparation, properties, and reactions of the compounds named in the title are described, with particular reference to the possible participation of (p→d)_π components in the bonding between the group IVB and the group VB elements.     

Pi bonding and negative hyperconjugation in mono-, di-, and triaminoborane, -alane, -gallane, and -indane

A systematic quantum chemical investigation of mono-, di-, and triaminoborane, -alane, -gallane, and -indane is carried out to determine quantitatively the effects of pi bonding and negative hyperconjugation on structures, energetics, and rotational barriers in these systems. Pi bonding plays a significant role in the aminoborane compounds, but becomes rapidly less significant in the aminoalanes, -gallanes, and -indanes. For each main-group metal X investigated, X-N rotational barriers are found to be essentially equal depending only on the number of remaining in-plane amino groups. The contribution of negative hyperconjugation to reducing rotational barriers, as assessed from natural bond orbital (NBO) delocalization energies, is independent of the pyramidalization of the out-of-plane amino group, and is also dependent only on the number of rotated groups. Optimized tris[bis(trimethylsilyl)amino]-substituted structures of boron, aluminum, gallium, and indium are found to compare quite well with available experimental structural data, and exhibit X-N torsion angles that are independent of the central metal atom.     

Pyrenes,Peropyrenes, and Teropyrenes: Synthesis,Structures, and Photophysical Properties

The design of a relatively simple and efficient method to extend the π‐conjugation of readily available aromatics in one‐dimension is of significant value. In this paper, pyrenes, peropyrenes, and teropyrenes were synthesized through a double or quadruple benzannulation reaction of alkynes promoted by Brønsted acid. This novel method does not involve cyclodehydrogenation (oxidative aryl–aryl coupling) to arrive at the newly incorporated large arene moieties. All of the target compounds were synthesized in moderate to good yields and were fully characterized with the structures unambiguously confirmed by X‐ray crystallography. As expected, photophysical characterization clearly shows increasing red‐shifts as a function of extended conjugation within the fused ring systems.     

Pyrenes,Peropyrenes, and Teropyrenes: Synthesis,Structures, and Photophysical Properties

The design of a relatively simple and efficient method to extend the π‐conjugation of readily available aromatics in one‐dimension is of significant value. In this paper, pyrenes, peropyrenes, and teropyrenes were synthesized through a double or quadruple benzannulation reaction of alkynes promoted by Brønsted acid. This novel method does not involve cyclodehydrogenation (oxidative aryl–aryl coupling) to arrive at the newly incorporated large arene moieties. All of the target compounds were synthesized in moderate to good yields and were fully characterized with the structures unambiguously confirmed by X‐ray crystallography. As expected, photophysical characterization clearly shows increasing red‐shifts as a function of extended conjugation within the fused ring systems.     

Mild, powerful, and robust methods for esterification, amide formation, and thioesterification between acid chlorides and alcohols, amines, thiols, respectively

We developed two efficient practical methods for esterification, amide formation, and thioesterification between acid chlorides and alcohols, amines, thiols, respectively. The present mild and robust reaction was performed by two separate methods both by combining cheap and readily available amines, N-methylimidazole, and N,N,N′,N′-tetramethylethylenediamine (TMEDA). Method A uses catalytic N-methylimidazole and TMEDA with an equimolar amount of K₂CO₃, whereas Method B uses equimolar amounts of N-methylimidazole and TMEDA. The salient features are as follows. (i) With regard to reactivity, Method B was superior to Method A for esterification and thioesterification, whereas cost-effective Method A was superior to Method B for amide formation. (ii) Amide formation proceeded smoothly between acid chlorides and less nucleophilic and stereocongested amines such as 2,6-dichloroaniline. (iii) This protocol was applied to the successful synthesis of two agrochemicals, bromobutide and carpropamid.     

Rare-Earth-compound nanowires, nanotubes, and fullerene-like nanoparticles: synthesis, characterization, and properties

Various low-dimensional nanostructures, such as nanowires, nanotubes, nanosheets, and fullerene-like nanoparticles have been selectively synthesized from rare-earth compounds (hydroxides, fluorides) based on a facile hydrothermal method. The subsequent dehydration, sulfidation, and fluoridation processes lead to the formation of rare-earth oxide, oxysulfide, and oxyhalide nanostructures, which can be functionalized further by doping with other rare-earth ions or by coating with metal nanoparticles. Owing to the interesting combination of novel nanostructures and functional compounds, these nanostructures can be expected to bring new opportunities in the vast research areas of and application in biology, catalysts, and optoelectronic devices.     

Transferable potentials for phase equilibria. 7. Primary, secondary, and tertiary amines, nitroalkanes and nitrobenzene, nitriles, amides, pyridine, and pyrimidine

The transferable potentials for phase equilibria (TraPPE) force fields are extended to amine, nitro, nitrile, and amide functionalities and to pyridine and pyrimidine. In many cases, the same parameters for a functional group are used for both united-atom and explicit-hydrogen representations of alkyl tails. Following the TraPPE philosophy, the nonbonded interaction parameters were fitted to the vapor-liquid coexistence curves for selected one-component systems. Coupled-decoupled configurational-bias Monte Carlo simulations in the Gibbs ensemble were applied to neat (methyl-, dimethyl-, trimethyl-, ethyl-, diethyl-, or triethyl-)amine, nitromethane, nitroethane, nitrobenzene, acetonitrile, propionitrile, acetamide, propanamide, butanamide, pyridine, and pyrimidine. Excellent agreement with experimental results was found, with the mean unsigned errors being less than 1% for both the critical temperature and the normal boiling temperature. Similarly, the liquid densities at low reduced temperatures are reproduced to within 1%, and the deviation for the critical densities is about 4%. Additional simulations were performed for the binary mixtures of methylamine + n-hexane, diethyl ether + acetonitrile, 1-propanol + acetonitrile, and nitroethane + ethanol. With the exception of the methylamine/n-hexane mixture for which the separation factor is substantially overestimated, agreement with experiment for the other three mixtures is very satisfactory.     

Acrolein polymerization: Monodisperse,homo, and hybrido microspheres,synthesis, mechanism,and reactions

Monodisperse polyacrolien (PA) microspheres were obtained by a single step process via two mechanisms: (a) aqueous polymerization of acrolein under alkaline conditions and (b) aqueous radical polymerization of acrolein by irradiation with a cobalt source. The diameter of the former microspheres can be varied from 0.04 up to 8 μm. The monodispersity of the system is also discussed. The diameter of the latter microspheres can be varied up to 0.2 μm. Hybrido PA microspheres were formed by grafting PA microspheres of average diameter of 0.1 μm obtained by irradiation onto the surface of PA microspheres produced by the alkaline mechanism. The aldehyde content of the microspheres prepared by irradiation is much higher than those of the microspheres formed under alkaline conditions. The aldehyde groups were used for the covalent binding of ligands containing primary amino groups, such as proteins and drugs, in a single step under physiological pH.     

Intermetallic compounds of the heaviest elements and their homologs: the electronic structure and bonding of MM', where M=Ge, Sn, Pb, and element 114, and M'=Ni, Pd, Pt, Cu, Ag, Au, Sn, Pb, and element 114

Fully relativistic (four-component) density-functional theory calculations were performed for intermetallic dimers MM', where M=Ge, Sn, Pb, and element 114, and MM'=group 10 elements (Ni, Pd, and Pt) and group 11 elements (Cu, Ag, and Au). PbM and 114M, where M are group 14 elements, were also considered. The results have shown that trends in spectroscopic properties-atomization energies D(e), vibrational frequencies omega(e), and bond lengths R(e), as a function of MM', are similar for compounds of Ge, Sn, Pb, and element 114, except for D(e) of PbNi and 114Ni. They were shown to be determined by trends in the energies and space distribution of the valence ns(MM')atomic orbitals (AOs). According to the results, element 114 should form the weakest bonding with Ni and Ag, while the strongest with Pt due to the largest involvement of the 5d(Pt) AOs. In turn, trends in the spectroscopic properties of MM' as a function of M were shown to be determined by the behavior of the np(1/2)(M) AOs. Overall, D(e) of the element 114 dimers are about 1 eV smaller and R(e) are about 0.2 a.u. larger than those of the corresponding Pb compounds. Such a decrease in bonding of the element 114 dimers is caused by the large SO splitting of the 7p orbitals and a decreasing contribution of the relativistically stabilized 7p(1/2)(114) AO. On the basis of the calculated D(e) for the dimers, adsorption enthalpies of element 114 on the corresponding metal surfaces were estimated: They were shown to be about 100-150 kJ/mol smaller than those of Pb.     

Conjugate addition reactions of alpha-aminoalkylcuprates with alpha, beta-alkenyl-, alpha,beta-alkynyl-, alpha,beta-beta,gamma-allenyl-, and alpha,beta-gamma,delta-dienyl carboxylic acid derivatives, nitriles, and sulfoxides

alpha-Aminoalkylcuprates prepared from alpha-lithio carbamates and CuCN.2LiCl participate in 1,4-addition reactions with alpha, beta-unsaturated esters, thiol esters, imides, and nitriles in poor to excellent yields depending upon the electron-withdrawing substituent and the substitution pattern of the unsaturated substrate. These reagents also undergo conjugate addition reactions with alpha,beta-alkynyl esters, sulfoxides, and nitriles and with alpha,beta-beta,gamma-unsaturated allenyl esters. Excellent stereocontrol is achieved in the conjugate additions of alpha-aminoalkylcuprates to the allenyl esters, while poor stereoselectivity results in the conjugate additions to the alkynyl derivatives. Deprotection and cyclization of the alkynyl adducts affords pyrrolin-2-ones, while similar treatment of the allenyl adducts affords 4-alkylidine- pyrrolidin-2-ones and pyrrolizidinones.     

Spectroscopy, electrochemistry, and molecular orbital calculations of metal-free tetraazaporphyrin, -chlorin, -bacteriochlorin, and -isobacteriochlorin

Metal-free tetraazachlorin (TAC), -bacteriochlorin (TAB), and -isobacteriochlorin (TAiB) were characterized by electronic absorption, magnetic circular dichroism (MCD), fluorescence, and time-resolved ESR (TR-ESR) spectroscopy, and by cyclic voltammetry. The results are compared with those of metal-free tetraazaporphyrin (TAP). The potential difference DeltaE between the first oxidation and reduction couples decreases in the order TAP>TAiB>TAC>TAB. The splitting of both the Q and Soret bands decreases in the order TAB>TAC>TAP>TAiB. Corresponding to the split absorption bands, MCD spectra show a minus-to-plus pattern with increasing energy in both the Q and Soret regions, which suggests that the energy difference between the HOMO and second HOMO is larger than that between the LUMO and second LUMO. These spectroscopic properties and redox potentials were reproduced by molecular orbital calculations using the ZINDO/S Hamiltonian. The fluorescence quantum yields of the reduced species are much smaller than that of TAP. The zero-field splitting (ZFS) parameters D and E of the excited triplet states (T1) of these species decrease and increase, respectively, on going from TAP to TAC and further to TAB. The D and E values of TAiB are larger than those of the other species. The results are supported by the absence of interaction between the spin over reduced pyrrole moieties of the HOMO and over the LUMO, and by calculations of ZFS under a half-point-charge approximation.     

Polarization, steric, and focusing micro-thermal field-flow fractionation principles, theory, instrumentation, and applications in polymers and particles analysis

The benefits of the miniaturization of the separation channel for Thermal field-flow fractionation (TFFF) are analyzed theoretically and studied experimentally. It is found that the operational variables influencing the efficiency and resolution of the separation can be optimized and that the concept of a micro-TFFF is meaningful. A miniaturized TFFF channel was proposed and constructed. It has been demonstrated experimentally that micro-TFFF allows one to carry out high-performance separations under carefully chosen experimental conditions. This new technique is highly competitive in comparison with size-exclusion chromatography (SEC) of macromolecules with molar masses up to roughly one million gram per mole. However, the versatility of micro-TFFF is superior to SEC for macromolecules of ultra-high molar masses, as well as colloidal sub-micron, and micron-sized particles of synthetic, natural, or biological origin. The free choice of the carrier liquids without any modification of the separation system affords an advantage to micro-TFFF. The experimental implementation and application to polymer and particle analysis confirmed the potential of micro-TFFF.     

Metal-Directed Formation of Tetra-, Hexa-, Octa-, and Nonanuclear Complexes of Magnesium,Calcium, Manganese,Copper, and Cadmium

Efficacious metal control of self-assembly of dialkylketipinate dianions leads to completely different supramolecular assemblies. The structures of grid 1 , double-decker 2 , triple-decker 3 , and metalla-spherand 4 were characterized by X-ray crystallographic analyses or by NMR spectroscopy.     

Formation,structure, composition,and catalytic properties of Ni-, Cu-, Mn-, Fe-, and co-containing films on aluminum

Layers containing oxygen compounds of copper and nickel and(or) of one of transition metals (manganese, cobalt, iron) were formed on an aluminum alloy by the plasma-electrolytic oxidation method. The layers were characterized by means of X-ray phase analysis, X-ray fluorescence microanalysis, and scanning electron microscopy and tested in the reaction of CO oxidation to CO₂.     

Pi and sigma-phenylethynyl radicals and their isomers o-, m-, and p-ethynylphenyl: structures, energetics, and electron affinities

Molecular structures, energetics, vibrational frequencies, and electron affinities are predicted for the phenylethynyl radical and its isomers. Electron affinities are computed using density functional theory, -namely, the BHLYP, BLYP, B3LYP, BP86, BPW91, and B3PW91 functionals-, employing the double-zeta plus polarization DZP++ basis set; this level of theory is known to perform well for the computation of electron affinities. Furthermore, ab initio computations employing perturbation theory, coupled cluster with single and double excitations [CCSD], and the inclusion of perturbative triples [CCSD(T)] are performed to determine the relative energies of the isomers. These higher level computations are performed with the correlation consistent family of basis sets cc-pVXZ (X = D, T, Q, 5). Three electronic states are probed for the phenylethynyl radical. In C2v symmetry, the out-of-plane (2B1) radical is predicted to lie about 10 kcal/mol below the in-plane (2B2) radical by DFT methods, which becomes 9.4 kcal/mol with the consideration of the CCSD(T) method. The energy difference between the lowest pi and sigma electronic states of the phenylethynyl radical is also about 10 kcal/mol according to DFT; however, CCSD(T) with the cc-pVQZ basis set shows this energy separation to be just 1.8 kcal/mol. The theoretical electron affinities of the phenylethynyl radical are predicted to be 3.00 eV (B3LYP/DZP++) and 3.03 eV (CCSD(T)/DZP++//MP2/DZP++). The adiabatic electron affinities (EAad) of the three isomers of phenylethynyl, that is, the ortho-, meta-, and para-ethynylphenyl, are predicted to be 1.45, 1.40, and 1.43 eV, respectively. Hence, the phenylethynyl radical binds an electron far more effectively than the three other radicals studied. Thermochemical predictions, such as the bond dissociation energies of the aromatic and ethynyl C-H bonds and the proton affinities of the phenylethynyl and ethynylphenyl anions, are also reported.     

Cubane, cuneane, and their carboxylates: a calorimetric, crystallographic, calculational, and conceptual coinvestigation

[reaction: see text] This study is a multinational, multidisciplinary contribution to the thermochemistry of dimethyl1,4-cubanedicarboxylate and the corresponding isomeric, cuneane derivative and provides both structural and thermochemical information regarding the rearrangement of dimethyl 1,4-cubanedicarboxylate to dimethyl 2,6-cuneanedicarboxylate. The enthalpies of formation in the condensed phase at T = 298.15 K of dimethyl 1,4-cubanedicarboxylate (dimethyl pentacyclo[4.2.0.0.(2,5)0.(3,8)0(4,7)]octane-1,4-dicarboxylate) and dimethyl 2,6-cuneanedicarboxylate (dimethyl pentacyclo[3.3.0.0.(2,4)0.(3,7)0(6,8)]octane-2,6-dicarboxylate) have been determined by combustion calorimetry, delta(f) H(o)m (cr)/kJ x mol(-1) = -232.62 +/- 5.84 and -413.02 +/- 5.16, respectively. The enthalpies of sublimation have been evaluated by combining vaporization enthalpies evaluated by correlation-gas chromatography and fusion enthalpies measured by differential scanning calorimetry and adjusted to T = 298.15 K, delta(cr) (g)Hm (298.15 K)/kJ x mol(-1) = 117.2 +/- 3.9 and 106.8 +/- 3.0, respectively. Combination of these two enthalpies resulted in delta(f) H(o)m (g., 298.15 K)/kJ x mol(-1) of -115.4 +/- 7.0 for dimethyl 1,4-cubanedicarboxylate and -306.2 +/- 6.0 for dimethyl 2,6-cuneanedicarboxylate. These measurements, accompanied by quantum chemical calculations, resulted in values of delta(f) Hm (g, 298.15 K) = 613.0 +/- 9.5 kJ x mol(-1) for cubane and 436.4 +/- 8.8 kJ x mol(-1) for cuneane. From these enthalpies of formation, strain enthalpies of 681.0 +/- 9.8 and 504.4 +/- 9.1 kJ x mol(-1) were calculated for cubane and cuneane by means of isodesmic reactions, respectively. Crystals of dimethyl 2,6-cuneanedicarboxylate are disordered; the substitution pattern and structure have been confirmed by determination of the X-ray crystal structure of the corresponding diacid.     

Borinium, borenium, and boronium ions: synthesis, reactivity, and applications

Boron cations are elusive and highly electrophilic species that play a key role in the chemistry of boron. Despite early interest in the chemistry of boron cations, until recently they have largely remained chemical curiosities. However, hints at harnessing their potential as potent electrophiles have begun to appear and developments in weakly coordinating anion technology suggest that this is an area of research that is ripe for exploration. It has been nearly 20 years since the last major review on boron cations; herein we summarize the progress in the area since that time.     

Copper adsorption and Si, Al, Ca, Mg, and Na release from clinoptilolite

Copper adsorption onto clinoptilolite (natural zeolite), Al/Si dissolution, and Mg, Ca, and Na release from the substrate were the subjects of the investigation described here. Experimental variables were Cu and electrolyte concentrations and solution pH. Copper adsorption was found to increase with increased pH and with decreased electrolyte concentration. Large amounts of K were also adsorbed from electrolyte. Since solution pH was assumed as a variable, the effects of [H(+)] differentiation on Cu adsorption and on Al/Si dissolution were also examined. Al dissolution was affected mainly by electrolyte concentration, whereas Si dissolution was affected mainly by adsorbed Cu amount. It was assumed that the release of Mg, Ca, and Na occurs through ion-exchange reactions with solution K(+), because their release is affected more by electrolyte concentration than by adsorbed Cu. From the study of FTIR spectra for various samples used in the present investigation, we observed that the removal of framework Si/Al shifts the band which was attributed to O-T-O stretching vibration toward higher frequency. Significant changes were observed for the bands assigned to Si-OH-Al bridges and to monomeric and polymeric hydrogen bonds at the region between 3650 and 3200 cm(-1). It is proposed that the Cu species caused the destruction of H-bonded structures, whereas K adsorbed species were located at exchangeable sites after an ion-exchange process between K and Ca, Mg, and Na from the zeolite's surface. An expansion of the zeolite framework was detected from XRD patterns under acid conditions.     

Polar-Functionalized,Crosslinkable, Self-Healing,and Photoresponsive Polyolefins

The nonpolar nature of polyolefins is one of their biggest limitations. Now, an efficient route to generate polar-functionalized, crosslinkable, self-healing, photoresponsive polyolefins with thermoplastic, elastomeric, and thermosetting properties is reported. Tunable amounts of carboxylic acid and a cyclic comonomer are installed onto polyolefins by palladium-catalyzed terpolymerization reactions. The incorporated carboxylic acid unit can alter the surface properties of polyolefins. The subsequently introduced Fe³⁺/citric acid combination induces dynamic crosslinking and enables self-healing. Under UV light irradiation, citric acid reduces Fe³⁺ to Fe²⁺ and decreases the crosslinking density. The Fe²⁺ moiety can be easily oxidized back to Fe³⁺, making the process reversible at the expense of citric acid. The incorporated cyclic comonomer modulates the crystallinity of polyolefins, provides elastic properties, and installs carbon–carbon double bonds for sulfur-induced vulcanization.     

Muscarine, imidazole, oxazole, and thiazole alkaloids

The occurrence, structure determination, biological activities, as well as total syntheses of muscarine, imidazole, oxazole and thiazole alkaloids have been reviewed. The literature covers from the middle of 2001 to the end of 2002, and 149 references are cited.