Achieving 16.68% efficiency ternary as-cast organic solar cells

State-of-the-art organic solar cells(OSCs)often require the use of high-boiling point additive or post-treatment such as temperature annealing and solvent vapor annealing to achieve the best efficiency.However,additives are not desirable in largescale industrial printing process,while post-treatment also increases the production cost.In this article,we report highly efficient ternary OSCs based on PM6:BTP-Cl Br1:BTP-2O-4Cl-C12(weight ratio=1:1:0.2),with 16.68%power conversion efficiency(PCE)for as-cast device,relatively close to its annealed counterpart(17.19%).Apart from obvious energy tuning effect and complementary absorption spectra,the improved PCE of ternary device is mainly attributed to improved morphological properties including the more favorable materials miscibility,crystallinity,domain size and vertical phase separation,which endorse suppressed recombination.The result of this work provides understanding and guidance for high-performance as-cast OSCs through the ternary strategy.     

通过调节共轭聚合物侧链实现可绿色溶剂加工的非富勒烯太阳能电池

有机太阳能电池(OSC)经过长期的发展,其能量转换效率(PCE)已快速推进至14%–16%,基本接近可商业化应用的范围,但在目前所见报道的高效率OSC器件的制备过程中,活性层薄膜的加工大多采用氯苯、二氯苯、氯仿等毒性较高的含卤/芳香性试剂,此类试剂对环境及人类健康的危害非常高。在本工作中,我们基于已报道的高效率给体共轭聚合物PBDB-T,通过扩大共轭侧链结构与增长柔性烷基侧链的方式,合成了新型给体聚合物PBDB-DT。PBDB-DT中较长的柔性烷基侧链保证了其在低毒性溶剂四氢呋喃(THF)溶液中良好的溶解度,同时,扩大的共轭侧链也有效增强了其在THF中的溶液聚集作用,这一特性对于在非富勒烯型OSC器件中获得较好的光伏性能尤其重要。当采用非富勒烯小分子IT-M作为电子受体材料时,以THF为主溶剂加工的基于PBDB-DT:IT-M的OSC器件可以获得10.2%的能量转换效率。     

Direct Arylation in the Presence of Palladium Pincer Complexes

Direct arylation is an atom-economical alternative to more established procedures such as Stille, Suzuki or Negishi arylation reactions. In comparison with other palladium sources and ligands, the use of palladium pincer complexes as catalysts or pre-catalysts for direct arylation has resulted in improved efficiency, higher reaction yields, and advantageous reaction conditions. In addition to a revision of the literature concerning intra- and intermolecular direct arylation reactions performed in the presence of palladium pincer complexes, the role of these remarkably active catalysts will also be discussed.     

A ternary organic solar cell with 300 nm thick active layer shows over 14% efficiency

In order to meet the requirements for making organic solar cells(OSCs) through solution printing techniques, great efforts have been devoted into developing high performance OSCs with relatively thicker active layers. In this work, a thick-film(300 nm)ternary OSC with a power conversion efficiency of 14.3% is fabricated by introducing phenyl-C_(61)-butyric-acid-methyl ester(PC_(61)BM) into a PBDB-T-2Cl:BTP-4 F host blend. The addition of PC_(61)BM is found to be helpful for improving the hole and electron mobilities, and thus facilitates charge transport as well as suppresses charge recombination in the active layers, leading to the improved efficiencies of OSCs with relatively thicker active layers. Our results demonstrate the feasibility of employing fullerene derivative PC_(61)BM to construct a high-efficiency thick-film ternary device, which would promote the development of thick layer ternary OSCs to fulfill the requirements of future roll to roll production.     

A chlorinated low-bandgap small-molecule acceptor for organic solar cells with 14.1% efficiency and low energy loss

A new acceptor-donor-acceptor(A-D-A) type small-molecule acceptor NCBDT-4 Cl using chlorinated end groups is reported.This new-designed molecule demonstrates wide and efficient absorption ability in the range of 600–900 nm with a narrow optical bandgap of 1.40 eV. The device based on PBDB-T-SF:NCBDT-4 Cl shows a power conversion efficiency(PCE) of 13.1%without any post-treatment, which represents the best result for all as-cast organic solar cells(OSCs) to date. After device optimizations, the PCE was further enhanced to over 14% with a high short-circuit current density(Jsc) of 22.35 m A cm-2 and a fill-factor(FF) of 74.3%. The improved performance was attributed to the more efficient photo-electron conversion process in the optimal device. To our knowledge, this outstanding efficiency of 14.1% with an energy loss as low as 0.55 eV is among the best results for all single-junction OSCs.     

氟化策略:高效有机光伏材料的设计与应用

有机太阳能电池具有成本低廉、质量轻、柔性可折叠以及可以大面积印刷等优点,受到广泛关注。但与无机太阳能电池相比,其能量损失较高。在有机光伏分子中引入氟原子是一种有效提高器件性能的分子设计策略。本文从氟原子特点出发,总结了氟化给体、π桥和受体单元对分子能级调控和形貌优化的作用,阐明了氟原子降低能量损失的内在原因;并通过代表性分子设计实例,简要阐述了氟化策略在高效聚合物给体材料、高效可溶性小分子给体材料以及高效非富勒烯受体材料中的应用;最后,对氟化策略的应用进行了总结,并展望了未来的研究方向。     

Direct arylation: Alternative to classic cross-coupling chemistry and a fruitful synthetic tool for the access to novative bioactive molecules

This account will discuss the advances performed in our group on direct arylation of heterocyclic systems regarded as critical scaffolds of pharmaceutical industries due to their wide-ranging biological and therapeutical properties. Applications to larger molecules devoted to pharmaceutical, material or agrochemical industries should bring significant improvement, getting rid of the preliminary step of prefunctionalization.     

Application of direct (hetero)arylation in constructing conjugated small molecules and polymers for organic optoelectronic devices

Direct (hetero)arylation, as a sustainable, atom-economic and environmentally benign synthetic protocol compared to conventional coupling techniques, has been extensively applied to the sustainable preparation of π-conjugated materials for organic optoelectronic devices. In this review, we will highlight recent advances made in direct arylation for conjugated small molecules and polymers toward high performance organic optoelectronic devices. Some important insights in direct arylation for synthesizing organic optoelectronic materials are given, together with the challenges and outlook in this significant and hot research field.     

Organic solar cells based on small molecule donor and polymer acceptor

Small molecule donor/polymer acceptor(SD/PA)-type organic solar cells(OSCs) have attracted widespread attention in recent years due to the continuing power conversion efficiency(PCE) growth, near 10%, and the excellent thermal stability for the practical applications. However, the development of SD/PA-type OSCs lags far behind that of polymer donor/small molecule acceptor(PD/SA)-type OSCs, which are also based on the combination of small molecule and polymer, with the PCEs exceeding 18%. The rea...     

Anisotropic charge carrier transport of optoelectronic functional selenium-containing organic semiconductor materials

Organic semiconductors (OSCs) materials are currently under intense investigation because of their potential applications such as organic field-effect transistors, organic photovoltaic devices, and organic light-emitting diodes. Inspired by the selenization strategy can promote anisotropic charge carrier migration, and selenium-containing compounds have been proved to be promising materials as OSCs both for hole and electron transfer. Herein, we now explore the anisotropic transport properties of the series of selenium-containing compounds. For the compound containing Se Se bond, the Se Se bond will break when attaching an electron, thus those compounds cannot act as n-type OSCs. About the different isomer compounds with conjugated structure, the charge transfer will be affected by the stacking of the conjugated structures. The analysis of chemical structure and charge transfer property indicates that Se-containing materials are promising high-performance OSCs and might be used as p-type, n-type, or ambipolar OSCs. Furthermore, the symmetry of the selenium-containing OSCs will affect the type of OSCs. In addition, there is no direct relationship between the R groups with their performance, whether it or not as p-type OSCs or n-types. This work demonstrates the relationship between the optoelectronic function and structure of selenium-containing OSCs materials and hence paves the way to design and improve optoelectronic function of OSCs materials.     

Ternary solvent-processed efficient organic solar cells based on a new A-DA'D-A acceptor derivative employing the 3rd-position branching side chains on pyrroles

Recent advances in non-fullerene acceptors(NFAs),typically Y6,have driven power conversion efficiency(PCE) of single-junction orga nic solar cells(OSCs) over 16%.Mea nwhile,it becomes essential to know how to adopt simple strategies to further improve device performance.In this work,a new A-DA'D-A acceptor derivative,Y19-N3 employing 3-ethylheptyl branched at the 3^rd-position instead of 2-ethylhexyl on the pyrroles of Y19 is reported.The selection of an appropriate solvent in casting device is implemented to maximize the photovoltaic performance.PBDB-T:Y19-N3-based OSCs treated with a ternary solvent of CF/CB(1:3,v/v) and 0.8% DIO exhibit the optimal PCE of 13.77% here,with the significantly improved V_oc(0.78 V) and FF(0.72) as well as the high J_sc(24.46 mA/cm²).Further characterizations indicate that this ternary solvent-treated PBDB-T/Y19-N3 film exhibits the more appropriate morphological features with the highly efficient charge generation and collection as well as the more balanced electron and hole mobilities.This work combines molecular design and device engineering to improve the photovoltaic properties,which is important to the development of OSCs.     

Synthesis and properties of 3,4-dioxythiophene and 1,4-dialkoxybenzene based copolymers via direct C?H arylation: Dopant-free hole transport material for perovskite solar cells

Direct C H arylation coupling reaction has gained significant importance in synthesis of conjugated polymers for organic electronic applications. We report here a facile and straightforward method called “direct C H arylation” reaction to synthesize conjugated 3,4-dioxythiophene and 1,4-dialkoxybenzene based copolymers as hole transport material (HTM) for perovskite solar cells. Two electron-rich conjugated polymers P1-2 were synthesized, in which 1,4-dibromo-2,5-bis(dodecyloxy)benzene and 3,4-dialkoxy-thiophene units were used for polymerization. The resulting polymers were characterized and exhibited high solubility in organic solvents. Electrochemical and optical characterizations were carried out by cyclic voltammetry and UV–Vis–NIR absorption spectroscopy and found that these polymers show higher-lying HOMO energy levels with wide band gap. Density functional theory calculation was performed on these polymers ( P1-2 ) and correlated with our experimental results. Finally, perovskite solar cells were fabricated by solution-processable deposition of P1-2 as dopant-free HTM with device geometry ITO/SnO₂/Perovskite/HTM( P1 / P2 )/Ag and achieved a maximum power conversion efficiency of 5.28%. This study provides information on designing and simple preparation by direct C H arylation reaction of higher-lying HOMO energy level polymer as HTM for perovskite solar cells.     

Achieving over 16% efficiency for single-junction organic solar cells

To achieve high photovoltaic performance of bulk hetero-junction organic solar cells(OSCs), a range of critical factors including absorption profiles, energy level alignment, charge carrier mobility and miscibility of donor and acceptor materials should be carefully considered. For electron-donating materials, the deep highest occupied molecular orbital(HOMO) energy level that is beneficial for high open-circuit voltage is much appreciated. However, a new issue in charge transfer emerges when matching such a donor with an acceptor that has a shallower HOMO energy level. More to this point, the chemical strategies used to enhance the absorption coefficient of acceptors may lead to increased molecular crystallinity, and thus result in less controllable phase-separation of photoactive layer. Therefore, to realize balanced photovoltaic parameters, the donor-acceptor combinations should simultaneously address the absorption spectra, energy levels, and film morphologies. Here, we selected two non-fullerene acceptors, namely BTPT-4F and BTPTT-4F, to match with a wide-bandgap polymer donor P2F-EHp consisting of an imidefunctionalized benzotriazole moiety, as these materials presented complementary absorption and well-matched energy levels. By delicately optimizing the blend film morphology, we demonstrated an unprecedented power conversion efficiency of over 16% for the device based on P2F-EHp:BTPTT-4F, suggesting the great promise of materials matching toward high-performance OSCs.     

从工业催化角度看分子筛催化剂未来发展的若干思考

从工业催化的角度思考和探讨了分子筛催化剂合成、催化及应用方面存在的一些问题与挑战, 并从沸石分子筛的高效催化、新结构分子筛合成与催化应用、沸石分子筛的经济合成、分子筛在绿色环保领域的新应用等几个方面, 综述了国内外相关的最新研究进展, 探讨了分子筛催化剂未来的发展方向. 旨在引发人们对分子筛催化未来向经济、可控、高效催化、绿色环保和新应用等方面发展的思考与探索.     

Enhancing the performance of organic solar cells by modification of cathode with a self-assembled monolayer of aromatic organophosphonic acid

We use a single-molecule self-assembled layer of an aromatic organophosphonic acid (2PACz) to modify the cathode interface layer in inverted organic solar cells (OSCs). The modified OSCs not only have an obvious improvement in power conversion efficiency (PCE), but also demonstrate greatly enhanced air stability. Ultraviolet photoelectron spectroscopy shows that the work function of cathode interlayer after modification by 2PACz is more suitable for electron extraction. In addition, the surface energy is reduced without affecting the film deposition, which will be beneficial to reduce the interfacial traps. As a result, the PCE of OSCs based on the PBDB-T:IT-M system is increased, and its stability in air is greatly improved (remaining 88% of its initial PCE after 555 h in air). Therefore, we provide a new strategy for constructing high-performance non-fullerene OSCs with enhanced air stability.     

基于非富勒烯小分子受体Y6的有机太阳能电池

随着给/受体材料的不断发展,有机太阳能电池的器件效率不断取得进展.特别是非富勒受体分子Y6的出现,使单结有机太阳能电池的效率突破了15％.Y6已经应用到了有机太阳能电池各个方面并且极大提升了其性能.本综述主要总结了Y6在二元、三元和四元、逐层印刷、柔性、叠层和半透明等有机太阳能电池方面的研究情况,以及基于Y6三线态的有...     

Manipulating active layer morphology of molecular donor/polymer acceptor based organic solar cells through ternary blends

The development of molecular donor/polymer acceptor blend(MD/PA)-type organic solar cells(OSCs) lags far behind other type OSCs. It is due to the large-size phase separation morphology of MD/PAblend, which results from the high crystallinity of molecular donors. In this article, to suppress the crystallinity of molecular donors, we use ternary blends to develop OSCs based on one polymer acceptor(P-BNBP-f BT) and two molecular donors(DR3 TBDTT and BTR) with similar chemical structures.The ternary OSC exhibits a power conversion efficiency(PCE) of 4.85%, which is higher than those of the binary OSCs(PCE=3.60% or 3.86%). To our best knowledge, it is the first report of ternary MD/PA-type OSCs and this PCE is among the highest for MD/PA-type OSCs reported so far. Compared with the binary blends, the ternary blend exhibits decreased crystalline size and improved face-on orientation of the donors. As a result, the ternary blend exhibits improved and balanced charge mobilities, suppressed charge recombination and increased donor/acceptor interfacial areas, which leads to the higher shortcircuit current density. These results suggest that using ternary blend is an effective strategy to manipulate active layer morphology and enhance photovoltaic performance of MD/PA-type OSCs.     

Facile,Versatile and Stepwise Synthesis of High-Performance Oligomer Acceptors for Stable Organic Solar Cells

Oligomer acceptors have recently emerged as promising photovoltaic materials for achieving high power conversion efficiency (PCE) and long-term stability in organic solar cells (OSCs). However, the limited availability of diverse acceptors, resulting from the sole synthetic approach, has hindered their potential for future industrialization. In this study, we present a facile and effective stepwise approach that utilizes two consecutive Stille coupling reactions for the synthesis of oligomer acceptors. To demonstrate the feasibility of the novel approach, we successfully synthesize a trimer acceptor, Tri-Y6-OD, and further systematically investigate the impact of oligomerization on device performance and stability. The results reveal that this approach has significant advantages compared to the conventional method, including reduced formation of unwanted by-products and lower difficulties in purification. Remarkably, the OSC based on PM6 : Tri-Y6-OD achieves an impressive PCE of 18.03 % and maintains 80 % of the initial PCE (T₈₀) for 1523 h under illumination, surpassing the performance of the corresponding small molecule acceptor Y6-OD-based device. Furthermore, the versatility of the synthetic strategy in obtaining diverse acceptors is further demonstrated. Overall, our findings provide a facile, versatile and stepwise way for synthesizing oligomer acceptors, thereby facilitating the development of stable and efficient OSCs.     

Connecting the philosophy of chemistry,green chemistry,and moral philosophy

This paper aims to connect philosophy of chemistry, green chemistry, and moral philosophy. We first characterize chemistry by underlining how chemists: (1) co-define chemical bodies, operations, and transformations; (2) always refer to active and context-sensitive bodies to explain the reactions under study; and (3) develop strategies that require and intertwine with a molecular whole, its parts, and the surroundings at the same time within an explanation. We will then point out how green chemists are transforming their current activities in order to act upon the world without jeopardizing life. This part will allow us to highlight that green chemistry follows the three aforementioned characteristics while including the world as a partner, as well as biodegradability and sustainability concerns, into chemical practices. In the third part of this paper, we will show how moral philosophy can help green chemists: (1) identify the consequentialist assumptions that ground their reasoning; and (2) widen the scope of their ethical considerations by integrating the notion of care and that of vulnerability into their arguments. In the fourth part of the paper, we will emphasize how, in return, this investigation could help philosophers querying consequentialism as soon as the consequences of chemical activities over the world are taken into account. Furthermore, we will point out how the philosophy of chemistry provides philosophers with new arguments concerning the key debate about the ‘intrinsic value’ of life, ecosystems and the Earth, in environmental ethics. To conclude, we will highlight how mesology, that is to say the study of ‘milieux’, and the concept of ‘ecumeme’ proposed by the philosopher and geographer Augustin Berque, could become important both for green chemists and moral philosophers in order to investigate our relationships with the Earth.     

Preparative scale synthesis of the biaryl core of anacetrapib via a ruthenium-catalyzed direct arylation reaction: unexpected effect of solvent impurity on the arylation reaction

In this report, we disclose our findings regarding the remarkable effect of a low-level impurity found in the solvent used for a ruthenium-catalyzed direct arylation reaction. This discovery allowed for the development of a robust and high-yield arylation protocol that was demonstrated on a multikilogram scale using carboxylate as the cocatalyst. Finally, a practical, scalable, and chromatography-free synthesis of the biaryl core of Anacetrapib is described.