Nonlinear high-frequency flutter of a plate

In recent studies of the problem of linear stability of a plate in a supersonic gas flow a new (“high-frequency”) type of flutter, which cannot be obtained by means of the piston theory usually employed in these problems, was found to exist together with the classical (“low-frequency”) type. In the present study a new method of calculating the pressure acting on a high-frequency vibrating plate is proposed and, using this method, high-frequency flutter is investigated in the nonlinear formulation and the flutter vibration amplitudes are determined.     

High-frequency flutter of a rectangular plate

In our recent study of strip plate flutter, two flutter types, low-and high-frequency, were revealed. The first arises due to interaction of the oscillation modes and has been investigated in detail in numerous studies using an approximate piston theory. The high-frequency flutter, detected for the first time, is a consequence of the presence of negative aerodynamic damping and cannot be obtained using the piston theory. In the present study, the high-frequency flutter of a rectangular plate is investigated.     

Flutter of a Wide Strip Plate in a Supersonic Gas Flow

The stability of an elastic plate in the form of a wide strip in a supersonic inviscid gas flow is investigated in the linear approximation. An expression for the dependence of the pressure on the plate deflection, asymptotically exact for wide plates, is used. Two qualitatively different instability types are obtained: flutter with respect to a single oscillatory mode due to negative aerodynamic damping and flutter of a related type due to the interaction of oscillatory modes. For each type the stability criterion and the frequency at which the oscillation amplitude grows most intensely are found.     

Numerical investigation of supersonic plate flutter using the exact aerodynamic theory

In classical investigations of panel flutter it is usually assumed that the gas pressure acting on the plate can be calculated within the framework of the piston theory, an approximation exact for high Mach numbers. The loss of stability revealed in these investigations is of the “coupled” type, involving the interaction of two oscillation modes. Recently, the use of asymptotic methods revealed another single-mode type of stability loss, which cannot be obtained within the framework of the piston theory. In the present study this type of stability loss is investigated numerically using the Bubnov-Galerkin method.     

Instability of an Unbounded Elastic Plate in a Gas Flow

The stability of an unbounded plane elastic plate in gas moving on one side of the plate and at rest on the other is analyzed. The gases are inviscid and in general different. The plate is under tension and has flexural stiffness. It is shown that the system is always unstable to plane sinusoidal perturbations with wave vector parallel to the velocity. As limiting cases, a tangential discontinuity between the two gases and unilateral flow past a plate with constant pressure on the opposite side are considered. In these cases, the conditions of stability to plane perturbations are non-trivial and are investigated below.     

Numerical Investigation of the Flutter of a Rectangular Plate

The flutter of a rectangular plate with an arbitrary direction of the velocity vector relative to the plate side is studied. A numerical no-saturation algorithm is constructed to solve the eigenvalue problem. Calculation results for the critical flutter velocity and corresponding eigenmodes are given.     

Vibration characteristics and flutter analysis of a composite laminated plate with a store

The effects of an external store on the flutter characteristics of a composite laminated plate in a supersonic flow are investigated. The Dirac function is used to formulate the interaction between the plate and the store. The first-order piston theory is used to describe the aerodynamic load. The governing equation of the composite laminated plate with an external store is established based on the Hamilton principle. The mode shapes are constructed by the admissible functions which are a set of characteristic orthogonal polynomials generated directly by the Gram-Schmidt process, and the boundary constraint is modeled as the artificial springs. The frequency and mode shapes of the plate under different boundaries are determined by the Rayleigh-Ritz method. The validity of the proposed approach is confirmed by comparing the results with those obtained from the finite element method (FEM). The effects of the mounting position, the center of gravity position and the mounting points spacing of the external store on the flutter boundary are discussed for both the simply supported and cantilever plates, respectively, which correspond to the two installation sites of the external store, i.e., the belly and wings of the aircraft.     

自由正交异性矩形厚板的动态稳定

对在一条边上作用着均匀分布的非保守跟随力的四边自由正交异性矩形厚板的动态稳定进行了分析，通过把位移和剪力展成重傅立叶级数解，把微分方程简化成了代数方程。计算表明厚度的微小变化会引起颤振载荷明显的减小。这个明显减小是因为存在剪切变形。     

Low speed flutter and limit cycle oscillations of a two-degree-of-freedom flat plate in a wind tunnel

This paper explores the dynamical response of a two-degree-of-freedom flat plate undergoing classical coupled-mode flutter in a wind tunnel. Tests are performed at low Reynolds number (Re~2.5×10⁴), using an aeroelastic set-up that enables high amplitude pitch–plunge motion. Starting from rest and increasing the flow velocity, an unstable behaviour is first observed at the merging of frequencies: after a transient growth period the system enters a low amplitude limit-cycle oscillation regime with slowly varying amplitude. For higher velocity the system transitions to higher-amplitude and stable limit cycle oscillations (LCO) with amplitude increasing with the flow velocity. Decreasing the velocity from this upper LCO branch the system remains in stable self-sustained oscillations down to 85% of the critical velocity. Starting from rest, the system can also move toward a stable LCO regime if a significant perturbation is imposed. Those results show that both the flutter boundary and post-critical behaviour are affected by nonlinear mechanisms. They also suggest that nonlinear aerodynamic effects play a significant role.     

On bimodal flutter behavior of a flexible airfoil

The dynamic aeroelastic behavior of an elastically supported airfoil is studied in order to investigate the possibilities of increasing critical flutter speed by exploiting its chord-wise flexibility. The flexible airfoil concept is implemented using a rigid airfoil-shaped leading edge, and a flexible thin laminated composite plate conformally attached to its trailing edge. The flutter behavior is studied in terms of the number of laminate plies used in the composite plate for a given aeroelastic system configuration. The flutter behavior is predicted by using an eigenfunction expansion approach which is also used to design a laminated plate in order to attain superior flutter characteristics. Such an airfoil is characterized by two types of flutter responses, the classical airfoil flutter and the plate flutter. Analysis shows that a significant increase in the critical flutter speed can be achieved with high plunge and low pitch stiffness in the region where the aeroelastic system exhibits a bimodal flutter behavior, e.g., where the airfoil flutter and the plate flutter occur simultaneously. The predicted flutter behavior of a flexible airfoil is experimentally verified by conducting a series of systematic aeroelastic system configurations wind tunnel flutter campaigns. The experimental investigations provide, for each type of flutter, a measured flutter response, including the one with indicated bimodal behavior.     

Study of the single-mode flutter of a rectangular plate in the case of variable amplification of the eigenmode along the plate

In [1] the single-mode (high-frequency) flutter of a plate was investigated in the case in which the eigenmodes in a vacuum are associated with symmetric trajectories of disturbance propagation along the plate. In the case of nonsymmetric trajectories a handicap to such a study is presented by the fact that the flow-induced oscillation buildup turns out to be different at different points on the plate, so that the “smearing” of the eigenfunction under the action of elasticity forces must be taken into account. In this study, this case is considered in detail.     

大跨度悬索桥钢箱加劲梁中央开槽的颤振控制机理

针对近流线型的闭口钢箱梁这种大跨悬索桥常用的加劲梁断面形式,采用风洞试验与理论分析相结合的方法研究不同宽度中央开槽的颤振控制作用与颤振控制机理.通过对原型断面和5种槽宽开槽断面(开槽宽度分别为原型断面宽度的20%、40%、60%、80%和100%)的试验研究表明,适当宽度的中央开槽可以较大幅度的提高颤振临界风速,但槽宽并非越宽越好,而是存在一个"最优槽宽".采用二维三自由度耦合颤振分析方法从气动阻尼和颤振形态矢量两方面对中央开槽的颤振控制机理进行理论研究,结果表明,适当宽度的中央开槽可以改善气动阻尼的形成和发展规律,并提高颤振发生时竖弯自由度的参与程度和扭弯耦合程度,从而增强结构的颤振稳定性能.     

Flutter and resonances of a flag near a free surface

We investigate the effects of a nearby free surface on the stability of a flexible plate in axial flow. Confinement by rigid boundaries is known to affect flag flutter thresholds and fluttering dynamics significantly, and this work considers the effects of a more general confinement involving a deformable free surface. To this end, a local linear stability is proposed for a flag in axial uniform flow and parallel to a free surface, using one-dimensional beam and potential flow models to revisit this classical fluid–structure interaction problem. The physical behaviour of the confining free surface is characterized by the Froude number, corresponding to the ratio of the incoming flow velocity to that of the gravity waves. After presenting the simplified limit of infinite span (i.e. two-dimensional problem), the results are generalized to include finite-span and lateral confinement effects. In both cases, three unstable regimes are identified for varying Froude number. Rigidly-confined flutter is observed for low Froude number, i.e. when the free surface behaves as a rigid wall, and is equivalent to the classical problem of the confined flag. When the flow and wave velocities are comparable, a new instability is observed before the onset of flutter (i.e. at lower reduced flow speed) and results from the resonance of a structural bending wave and one of the fundamental modes of surface gravity waves. Finally, for large Froude number (low effect of gravity), flutter is observed with significant but passive deformation of the free surface in response of the flag’s displacement.     

Flutter of an elastic plate in a channel flow: Confinement and finite-size effects

When a cantilevered plate lies in an axial flow, it is known to exhibit self-sustained oscillations once a critical flow velocity is reached. This flutter instability has been investigated theoretically, numerically and experimentally by different authors, showing that the critical velocity is always underestimated by two-dimensional models. However, it is generally admitted that, if the plate is confined in the spanwise direction by walls, three-dimensionality of the flow is reduced and the two-dimensional models can apply. The aim of this article is to quantify this phenomenon by analysing the effect of the clearance between the plate and the side walls on the flutter instability. To do so, the pressure distribution around an infinite-length plate is first solved in the Fourier space, which allows to develop an analytical model for the pressure jump. This model is then used in real space to compute instability thresholds as a function of the channel clearance, the plate aspect ratio and mass ratio. Our main result shows that, as the value of the clearance is reduced, the convergence towards the two-dimensional limit is so slow that this limit is unattainable experimentally.     

Panel flutter prediction in two dimensional flow with enhanced piston theory

Piston theory may be used in the high Mach number supersonic flow region and/or in very high frequency subsonic or supersonic flow. In this flow model, the pressure at a point on the fluid-solid interface only depends on the downwash at the same point. However the classical piston theory may not be sufficient for some phenomena in aeroelasticity and aeroacoustics (far field prediction). Dowell and Bliss have created an extension of piston theory that allows for higher order effects that take into account the effect the distribution of downwash on pressure at any point. For simple harmonic motion, expansions in reduced frequency, inverse reduced frequency and/or inverse (square of) Mach number have all been created; The effects of higher order terms in these several expansion in creating an enhanced piston theory was illustrated for plunge and pitch motion of an airfoil (discrete system) by Ganji and Dowell. In the present paper, flutter prediction for a flexible panel in two –dimensional flow is investigated using enhanced piston theory. The goal of the present paper is to demonstrate that an enhance version of piston theory can analyze single degree of freedom flutter of a panel as compared to the classical piston theory and quasi-steady aerodynamic models which can only treat coupled mode flutter.     

Viscous and inviscid interactions of an oblique shock with a flexible panel

The complex self-sustained oscillations arising from the interaction of an oblique shock with a flexible panel in both the inviscid and viscous regimes have been investigated numerically. The aeroelastic interactions are simulated using either the Euler or the full compressible Navier–Stokes equations coupled to the nonlinear von Karman plate equations. Results demonstrate that for a sufficiently strong shock limit-cycle oscillations emerge from either subcritical or supercritical bifurcations even in the absence of viscous separated flow effects. The critical dynamic pressure diminishes with increasing shock strength and can be much lower than that corresponding to standard panel flutter. Significant changes in panel dynamics were also found as a function of the shock impingement point and cavity pressure. For viscous laminar flow above the panel without a shock, high-frequency periodic oscillations appear due to the coupling of boundary-layer instabilities with high-mode flexural deflections. For a separated shock laminar boundary layer interaction, non-periodic self-excited oscillations arise which can result in a significant reduction in the extent of the time-averaged separation region. This finding suggests the potential use of an aeroelastically tailored flexible panel as a means of passive flow control. Forced panel oscillations, induced by a specified variable cavity pressure underneath the panel, were also found to be effective in reducing separation. For both inviscid and viscous interactions, the significant unsteadiness generated by the fluttering panel propagates along the complex reflected expansion/recompression wave system.     

Precursors to flutter instability by an intermittency route: A model free approach

The aeroelastic response of a NACA 0012 airfoil in the flow regimes prior to flutter is investigated in a wind tunnel. We observe intermittent bursts of periodic oscillations in the pitch and plunge response, that appear in an irregular manner from a background of relatively lower amplitude aperiodic fluctuations. As the flow speed is increased, the intermittent bursts last longer in time until eventually transitioning to a fully developed periodic response, indicating the onset of flutter. The repeating patterns in the measured response are visualized using recurrence plots. We show that statistics of the recurrence states extracted from these plots can be used to develop model-free precursors that forewarn an impending transition to flutter, well before its onset.     

粘弹性夹芯层合旋转圆板的气动弹性动力稳定性分析

基于哈密尔顿原理,考虑作用于圆板上的空气动力载荷以及粘弹性复模量本构模型,本文建立了含有粘弹性夹芯层的旋转圆板的空气动力学模型,并给出了相应的稳定性的控制方程及边界条件。运用Galerkin方法,文中数值求解并给出了夹芯层合旋转圆板的动力学基本特征,以及结构几何参数、材料参数对于其前、后行波振动频率、阻尼和动力稳定性的影响。结果表明：通过优化合理选取粘弹性夹芯层合旋转圆板的几何参数和材料参数,可提高旋转圆板的临界转速和颤振速度,从而增强其稳定性。     

变角度纤维复合材料层合斜板的颤振分析

假设纤维方向角沿层合板的长度方向线性变化，研究了变角度纤维复合材料层合斜板的颤振．通过坐标变换将斜板变换为正方形板，采用层合板表面连续变化的速度环量来模拟空气对其的作用，速度环量分布利用Cauchy积分公式计算．建立了系统的Lagrange方程并采用Ritz法得到了层合板的自振频率和颤振/不稳定性分离临界速度．通过数值算例验证了本文模型和方法的正确性和收敛性，分析了各个铺层内纤维方向角的变化对自振频率和颤振/不稳定性分离临界速度的影响．研究结果表明，通过纤维的变角度铺设，可有效地提高层合板的基频和颤振/不稳定性分离临界速度．经合理设计的变角度复合材料层合板具有抑制颤振的作用．     

Numerical study of the dependence of the critical flutter speed and time of a plate on rheological parameters

The nonlinear flutter of some aircraft elements is modeled. A viscoelastic model is used. Numerical algorithms for solving integro-differential equations are developed. The critical flutter speed and time for a viscoelastic plate are determined __________ Translated from Prikladnaya Mekhanika, Vol. 44, No. 6, pp. 97–104, June 2008.