The extracts from the aerial parts of Portulaca quadrifida have been reported to show the total flavonoid content, antioxidant and antibacterial activities.
Results
Our results revealed that the total flavonoid content of methanol and chloroform extracts is 2.335?±?0.0097 and 1.7312?±?0.0082 mgQE/100 g respectively. The two extracts also showed good antioxidant activity and total phenolic content as well as weak to moderate antibacterial activity against some bacteria.
Conclusions
The extracts the aerial parts of the P. quadrifida showed good total flavonoid content, DPPH radical scavenging activity and antibacterial activity. In addition to this, the extracts also showed the presence of some important compounds by phytochemical analysis.
The thermal oxidative degradation of aged and non aged cellulose samples of commercial paper was studied using thermogravimetry and derivative thermogravimetry under a forced air flow up to 800°C.
Results
TG and DTG data were processed using two non-isothermal-based model-fitting methods and one based on linear least squares to calculate Ea trend values, measured as a function of artificially induced sample age. The Ea trends thus obtained were compared in order to assess their potential for yielding archaeometric curves. As the trends of first two methods show an inversion of the direction between non aged cellulose samples and artificially aged samples, while the third method does not, an in-depth study was carried out using a multilinearity assumption.
Conclusions
The results are discussed and the outcomes indicate that the above cited inversion is real and not linked to the method. Additionally, it was evidenced that the number of points used for the estimation of linear least squares model parameters is of capital importance.
Drugs that bind to the human Ether-a-go-go Related Gene (hERG) potassium channel and block its ion conduction can lead to Torsade de Pointes (TdP), a fatal ventricular arrhythmia. Thus, compounds are screened for hERG inhibition in the drug development process; those found to be active face a difficult road to approval. Knowing which structural transformations reduce hERG binding would be helpful in the lead optimization phase of drug discovery.
Results
To identify such transformations, we carried out a comprehensive analysis of all approximately 33,000 compound pairs in the Novartis internal database which have IC50 values in the dofetilide displacement assay. Most molecular transformations have only a single example in the data set; however, a few dozen transformations have sufficient numbers for statistical analysis.
Conclusions
We observe that transformations which increased polarity (for example adding an oxygen, or an sp2 nitrogen), decreased lipophilicity (removing carbons), or decreased positive charge consistently reduced hERG inhibition between 3- and 10-fold. The largest observed reduction in hERG was from a transformation from imidazole to methyl tetrazole. We also observe that some changes in aromatic ring substituents (for example hydrogen to methoxy) can also reduce hERG binding in vitro.
The compounds 1,4-napthoquinone (1,4-NQ), bis-(2,4-dinitrophenyl)sulfide (2,4-DNPS), 4-nitrobenzothiadiazole (4-NBT), 3-dimethylaminopropiophenone (3-DAP) and menadione (MD) were tested for antimalarial activity against both chloroquine (CQ)-sensitive (D6) and chloroquine (CQ)-resistant (W2) strains of Plasmodium falciparum through an in vitro assay and also for analysis of non-covalent interactions with P. falciparum thioredoxin reductase (PfTrxR) through in silico docking studies.
Results
The inhibitors of PfTrxR namely, 1,4-NQ, 4-NBT and MD displayed significant antimalarial activity with IC50 values of?<?20 μM and toxicity against 3T3 cell line. 2,4-DNPS was only moderately active. In silico docking analysis of these compounds with PfTrxR revealed that 2,4-DNPS, 4-NBT and MD interact non-covalently with the intersubunit region of the enzyme.
Conclusions
In this study, tools for the identification of PfTrxR inhibitors using phenotyphic screening and docking studies have been validated for their potential use for antimalarial drug discovery project.
Herbaceous plants are common vegetal species generally exposed, for a limited period of time, to bioavailable environmental pollutants. Heavy metals contamination is the most common form of environmental pollution. Herbaceous plants have never been used as natural bioindicators of environmental pollution, in particular to monitor the amount of heavy metals in soil. In this study, we aimed at assessing the usefulness of using three herbaceous plants (Plantago major L., Taraxacum officinale L. and Urtica dioica L.) and one leguminous (Trifolium pratense L.) as alternative indicators to evaluate soil pollution by heavy metals.
Results
We employed Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) to assess the concentration of selected heavy metals (Cu, Zn, Mn, Pb, Cr and Pd) in soil and plants and we employed statistical analyses to describe the linear correlation between the accumulation of some heavy metals and selected vegetal species. We found that the leaves of Taraxacum officinale L. and Trifolium pratense L. can accumulate Cu in a linearly dependent manner with Urtica dioica L. representing the vegetal species accumulating the highest fraction of Pb.
Conclusions
In this study we demonstrated that common plants can be used as an alternative analytical tool for monitoring selected heavy metals in soil.
Ground waters are an important resource of water supply for human health and activities. Groundwater uses and applications are often related to its composition, which is increasingly influenced by human activities.In fact the water quality of groundwater is affected by many factors including precipitation, surface runoff, groundwater flow, and the characteristics of the catchment area. During the years 2004-2007 the Agricultural and Food Authority of Apulia Region has implemented the project “Expansion of regional agro-meteorological network” in order to assess, monitor and manage of regional groundwater quality. The total wells monitored during this activity amounted to 473, and the water samples analyzed were 1021. This resulted in a huge and complex data matrix comprised of a large number of physical-chemical parameters, which are often difficult to interpret and draw meaningful conclusions. The application of different multivariate statistical techniques such as Cluster Analysis (CA), Principal Component Analysis (PCA), Absolute Principal Component Scores (APCS) for interpretation of the complex databases offers a better understanding of water quality in the study region.
Results
Form results obtained by Principal Component and Cluster Analysis applied to data set of Foggia province it’s evident that some sampling sites investigated show dissimilarities, mostly due to the location of the site, the land use and management techniques and groundwater overuse. By APCS method it’s been possible to identify three pollutant sources: Agricultural pollution 1 due to fertilizer applications, Agricultural pollution 2 due to microelements for agriculture and groundwater overuse and a third source that can be identified as soil run off and rock tracer mining.
Conclusions
Multivariate statistical methods represent a valid tool to understand complex nature of groundwater quality issues, determine priorities in the use of ground waters as irrigation water and suggest interactions between land use and irrigation water quality.
The aim of the current work was to determine thermo dynamical properties of 5(2-nitro phenyl)-furan-2-carbaldehyde, 5(3-nitro phenyl)-furan-2-carbaldehyde and 5(4-nitro phenyl)-furan-2-carbaldehyde.
Results
The temperature dependence of saturated vapor pressure of 5(2-nitro phenyl)-furan-2-carbaldehyde, 5(3-nitro phenyl)-furan-2-carbaldehyde and 5(4-nitro phenyl)-furan-2-carbaldehyde was determined by Knudsen’s effusion method. The results are presented by the Clapeyron–Clausius equation in linear form, and via this form, the standard enthalpies, entropies and Gibbs energies of sublimation and evaporation of compounds were calculated at 298.15 K. The standard molar formation enthalpies of compounds in crystalline state at 298.15 K were determined indirectly by the corresponding standard molar combustion enthalpy, obtained using bomb calorimetry combustion.
Conclusions
Determination of the thermodynamic properties for these compounds may contribute to solving practical problems pertaining optimization processes of their synthesis, purification and application and it will also provide a more thorough insight regarding the theoretical knowledge of their nature.
An increased incidence of fungal infections, both invasive and superficial, has been witnessed over the last two decades. Candida species seem to be the main etiology of nosocomial fungal infections worldwide with Candida albicans, which is commensal in healthy individuals, accounting for the majority of invasive Candida infections with about 30-40% of mortality.
Results
New aromatic and heterocyclic esters 5a-k of 1-aryl-3-(1H-imidazol-1-yl)propan-1-ols 4a-d were successfully synthesized and evaluated for their anti-Candida potential. Compound 5a emerged as the most active congener among the newly synthesized compounds 5a-k with MIC value of 0.0833 μmol/mL as compared with fluconazole (MIC value >1.6325 μmol/mL). Additionally, molecular modeling studies were conducted on a set of anti-Candida albicans compounds.
Conclusion
The newly synthesized esters 5a-k showed more potent anti-Candida activities than fluconazole. Compounds 7 and 8 revealed significant anti-Candida albicans activity and were able to effectively satisfy the proposed pharmacophore geometry, using the energy accessible conformers (Econf?<?20 kcal/mol).
The quasi-classical trajectory calculations for O(1D)?+?HCl?→?OH?+?Cl (R1) and O(1D)?+?HCl?→?ClO?+?H (R2) reactions have been performed at hyperthermal collision energies (60.0, 90.0, and 120.0 kal/mol) on the 1A' state. Reaction probabilities and integral cross sections are calculated. The product rotational distributions for the two channels, and the product rotational alignment parameters are investigated. Also, the alignment and the orientation of the products have been predicted through the angular distribution functions (concerning the initial/final velocity vector, and the product rotational angular momentum vector). To have a deeper understanding of the natures of the vector correlation between reagent and product relative velocities, a natural generalization of the differential cross section __PDDCS00, is calculated.
Results
The OH?+?Cl channel is the main product channel and is observed to have essentially isotropic rotational distributions. The ClO?+?H channel is found to be clearly rotationally polarized.
Conclusions
The dynamical, especially the stereodynamical characters are quite different for the two channels of the title reaction. Most reactions occur directly, except for R2 reaction at the collision energies of 60.0 and 120.0 kcal/mol. The alignment and orientation effects are weak/strong for R1/R2 reaction. The well structure on the potential energy surface and hyperthermal collision energies might result in the dynamical effects.
Drugs photostability plays two different opposite roles; a real advantage arises considering the longer expiration time of the drugs while the consequent persistence in the environment involves an obvious negative effect bound to their harmfulness.On this basis we tested the photostability and toxicity of three pharmaceutical active principles: Finasteride, Diclofenac and Naproxen. The pure active principles, as well as commercial drugs containing them, were considered; for the last, the protective effect of the packaging was also evaluated. Samples were irradiated according to the ICH Guidelines for photostability testing (The International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use); a simulating sunlight source (a mercury-vapor lamp coupled to a tungsten filament one) was used to cover the wavelength range 300–2000 nm; Temperature, Relative Humidity, Irradiance and Illuminance were maintained constant during the photodegradation. The concentrations of the pharmaceutical active principles during the photodegradation were monitored by HPLC with UV/Vis detector. Toxicity tests were performed by means of an amperometric biosensor based on suspended yeast cells. Since the products obtained by the photodegradation process can result as toxic or more toxic than the original molecules, tests were performed first and after the photodegadation.
Results
After 90 hours of exposure the concentration resulted lowered by 42.9%, 88.4% and 91% for Finasteride, Naproxen and Diclofenac respectively. Toxicity of the pure active principles follows the same order of the photostability. After photodegradation a contribute of the reaction products was evidenced.
Conclusions
The simple and cheap analytical procedure here proposed, allowed to obtain not only data on photostability and toxicity of the pure active principles but, even if roughly, also useful information on the reactions kinetic and toxicity of the photodegradation products.
One of the most popular techniques for cancer detection is the nuclear medicine technique. The present research focuses on Platelet-12-lipoxygenase (P-12-LOX) as a promising target for treating and radio-imaging tumor tissues. Curcumin was reported to inhibit this enzyme via binding to its active site.
Results
A novel curcumin derivative was successfully synthesized and characterized with yield of 74%. It was radiolabeled with the diagnostic radioisotope technetium-99m with 84% radiochemical yield and in vitro stability up to 6 h. The biodistribution studies in tumor bearing mice confirmed the high affinity predicted by the docking results with a free binding energy value of (ΔG ?50.10 kcal/mol) and affinity (13.64 pki) showing high accumulation in solid tumor with target/non-target ratio >6.
Conclusion
The newly synthesized curcumin derivative, as a result of a computational study on platelet-12 lipoxygenase, showed its excellent free binding energy (?G ?50.10 kcal/mol) and high affinity (13.64 pKi). It could be an excellent radio-imaging agent that targeting tumor cells via targeting of P-12-LOX.
Graphical abstract This novel curcumin derivative was successfully synthesized and radiolabeled with technetium-99m and biologically evaluated in tumor bearing mice that showed high accumulation in solid tumor with target/non-target ratio >6 confirming the affinity predicted by the docking results. Predicted binding mode of a new curcumin derivative in complex with 12-LOX active site. b Curcumin itself in the 12-LOX active site biological distribution of 99mTc-curcumin derivative complex in solid tumor bearing Albino mice
Salicylic acid and its derivatives are widely used drugs with potential toxicity. The main areas of salicylate derivatives determination are biological liquids and pharmaceuticals analysis.
Results
Silica-titania xerogel has been used for solid phase spectrophotometric determination of various salicylate derivatives (salicylate, salicylamide, methylsalicylate). The reaction conditions influence on the interaction of salicylate derivatives with silica-titania xerogels has been investigated; the characteristics of titanium(IV)-salicylate derivatives complexes in solid phase have been described. The simple solid phase spectrophotometric procedures are based on the formation of xerogel incorporated titanium(IV) colored complexes with salicylate derivatives. A linear response has been observed in the following concentration ranges 0.1–5, 0.5–10 and 0.05-4.7 mM for salicylate, salicylamide, and methylsalicylate, respectively. The proposed procedures have been applied to the analysis of human urine, synthetic serum, and pharmaceuticals.
Conclusions
The simple solid phase spectrophotometric procedures of salicylate derivatives determination based on the new sensor materials have been proposed for biological liquids and pharmaceuticals analysis.
Graphical abstractComplexation of titanium (IV), incorporated in silica-titania xerogels (Si-Ti), with salicylate derivatives (L) resulting in yellow-colored xerogels (Si-Ti/Ln) has been proposed for salicylate derivatives determination in biological liquids and pharmaceuticals
Phospholipid, a main component of cell membrane, has been explored as a model system of the cell membrane and temporary scaffold materials in recent studies. The mechanical properties of phospholipid layers are essentially interesting since it is involved in several biological processes.
Results
Here, the nanomechanical properties such as indentation force, adhesion force and DMT (Derjaguin-Müller-Toporov) modulus of 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) Langmuir-Blodgett (LB) films were analyzed layer by layer with Atomic Force Microscope (AFM) under deionized water condition.
Conclusions
The penetration distances in the indentation force curves are equal to the thicknesses of phospholipid films, and the yield forces of DSPC LB films in deionized water are smaller than that of similar lipid films in buffered solutions due to the influence of ions. Moreover, the DMT modulus of upper layer DSPC LB film is different from that of monolayer DSPC LB film due to the influence of their different substrates. Our results suggest that environment such as surrounding ions and substrate will strongly influence the measured nano-mechanical properties of the lipid bilayer, especially that of the down layer.
An alarming requirement for finding newer antidiabetic glitazones as agonists to PPARγ are on its utmost need from past few years as the side effects associated with the available drug therapy is dreadful. In this context, herein, we have made an attempt to develop some novel glitazones as PPARγ agonists, by rational and computer aided drug design approach by implementing the principles of bioisosterism. The designed glitazones are scored for similarity with the developed 3D pharmacophore model and subjected for docking studies against PPARγ proteins. Synthesized by adopting appropriate synthetic methodology and evaluated for in vitro cytotoxicity and glucose uptake assay. Illustrations about the molecular design of glitazones, synthesis, analysis, glucose uptake activity and SAR via 3D QSAR studies are reported.
Results
The computationally designed and synthesized ligands such as 2-(4-((substituted phenylimino)methyl)phenoxy)acetic acid derivatives were analysed by IR, 1H-NMR, 13C-NMR and MS-spectral techniques. The synthesized compounds were evaluated for their in vitro cytotoxicity and glucose uptake assay on 3T3-L1 and L6 cells. Further the activity data was used to develop 3D QSAR model to establish structure activity relationships for glucose uptake activity via CoMSIA studies.
Conclusion
The results of pharmacophore, molecular docking study and in vitro evaluation of synthesized compounds were found to be in good correlation. Specifically, CPD03, 07, 08, 18, 19, 21 and 24 are the candidate glitazones exhibited significant glucose uptake activity. 3D-QSAR model revealed the scope for possible further modifications as part of optimisation to find potent anti-diabetic agents.
Combretastatin A-4 (CA-4), which is an excellent antineoplastic agent, was isolated from Combretum caffrum. To date, structural modification studies of CA-4 have focused predominantly on the construction of new therapeutic agents for drug discovery. As a part of our ongoing work towards the modification of natural products, we have focused on the 3’-O-substituent groups in the B-ring of CA-4 under the hypothesis that these novel derivatives will possess good bioactivities and behave as effective antiproliferative pro-drugs.
Results
A series of novel CA-4 derivatives, which contained a 3’-O-substituted carbonic ether moiety, were synthesized and evaluated for their antitumor activities against four tumor cell lines, including MDA-MB-231, MCF-7, K562 and A549 cells. These derivatives exhibited clear antitumor activities, and CA-4E, in particular, showed the highest bioactivity of all of the derivatives tested against all four tumor cell lines, with IC50 values in the range of 1 to 180 nM. Based on its high bioactivity, CA-4E was subsequently selected to investigate the antitumor mechanism of these synthetic compounds. The cell cycle results demonstrated that CA-4E induced time- and dose-dependent G2/M arrest in a similar manner to CA-4, although its effect was more powerful than that of CA-4, and the apoptosis data showed that CA-4E induced cellular apoptosis in a dose-dependent manner.
Conclusions
The newly synthesized CA-4 derivatives exhibited good antitumor activities in vitro, with CA-4E, in particular, showing the highest bioactivity of all of the compounds tested. Furthermore, CA-4E induced time- and dose-dependent G2/M arrest and cellular apoptosis in a dose-dependent manner. Taken together, these results suggest that CA-4E should be subjected to further investigation as a potential anticancer drug candidate.
The paper presents the evaluation of soil contamination with total, water-available, mobile, semi-mobile and non-mobile Hg fractions in the surroundings of a former chlor-alkali plant in connection with several chemical soil characteristics. Principal Component Analysis and Cluster Analysis were used to evaluate the chemical composition variability of soil and factors influencing the fate of Hg in such areas. The sequential extraction EPA 3200-Method and the determination technique based on capacitively coupled microplasma optical emission spectrometry were checked.
Results
A case study was conducted in the Turda town, Romania. The results revealed a high contamination with Hg in the area of the former chlor-alkali plant and waste landfills, where soils were categorized as hazardous waste. The weight of the Hg fractions decreased in the order semi-mobile?>?non-mobile?>?mobile?>?water leachable. Principal Component Analysis revealed 7 factors describing chemical composition variability of soil, of which 3 attributed to Hg species. Total Hg, semi-mobile, non-mobile and mobile fractions were observed to have a strong influence, while the water leachable fraction a weak influence. The two-dimensional plot of PCs highlighted 3 groups of sites according to the Hg contamination factor. The statistical approach has shown that the Hg fate in soil is dependent on pH, content of organic matter, Ca, Fe, Mn, Cu and SO42- rather than natural components, such as aluminosilicates. Cluster analysis of soil characteristics revealed 3 clusters, one of which including Hg species. Soil contamination with Cu as sulfate and Zn as nitrate was also observed.
Conclusions
The approach based on speciation and statistical interpretation of data developed in this study could be useful in the investigation of other chlor-alkali contaminated areas. According to the Bland and Altman test the 3-step sequential extraction scheme is suitable for Hg speciation in soil, while the used determination method of Hg is appropriate.
Polychlorinated biphenyls (PCBs) are a group of environmental persistent organic pollutants, which can be metabolized into a series of metabolites, including hydroxylated metabolites (OH-PCBs) in biota. Nineteen of 209 PCB congeners can form chiral stable isomers. However, atropisomeric determination of the hydroxylated metabolites of these chiral PCBs has never been reported by LC methods. In this work, a novel HPLC-MS method was developed to detect five chiral OH-PCBs (4OH-PCB91, 5OH-PCB91, 4OH-PCB95, 5OH-PCB95 and 5OH-PCB149) using HPLC-MS without a derivatization step.
Results
The influences of column-type, column temperature, flow rate and ratio of the mobile phase on the atropisomeric separation were investigated in detail. In the final method, calibration curves, based on peak areas against concentration, were linear in a range of 1–100 ng mL-1 of five chiral OH-PCBs with correlation coefficients ranging from 0.9996 to 0.9999 for all atropisomers of OH-PCBs. The relative standard deviations measured at the 10.0 ng mL-1 level for atropisomers of five chiral OH-PCBs were in the range of 0.60-7.55% (n?=?5). Calculated detection limits (S/N?=?3) of five chiral OH-PCBs were between 0.31 and 0.60 ng mL-1 for all OH-PCB atropisomers.
Conclusion
This HPLC-MS method was developed to detect chiral OH-PCBs and further successfully applied to measure OH-PCB atropisomer levels and enantiomeric fractions (EFs) in rat liver microsomal samples. The results from LC-MS method were highly consistent with those from GC-ECD method. It is the first time to report these OH-PCB atropisomers detected in microsomes by HPLC-MS. The proposed method might be applied also to detect chiral OH-PCBs in environmental samples and for metabolites of PCBs in vivo.
Principal Component Analysis (PCA) and Hierarchical Cluster Analysis (HCA) were applied on PM10 particle data in order to: identify particle clusters that can be differentiated on the bases of their chemical composition and morphology, investigate the relationship among the chemical and morphological parameters and evaluate differences among the sampling sites. PM10 was collected in 3 different sites in central Italy characterized by different conditions: yard, urban and rural sites. The concentration of 20 chemical parameters (C, O, Na, Mg, Al, Si, P, Cd, Cl, K, Ca, Sn, Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn) were determined by Scanning Electron Microscopy – Energy Dispersive X-ray Spectroscopy (SEM-EDS) and the particle images were processed by an image analysis software in order to measure: Area, Aspect Ratio, Roundness, Fractal Dimension, Box Width, Box Height and Perimeter.
Result
Results revealed the presence of different clusters of particles, differentiated on the bases of chemical composition and morphological parameters (aluminosilicates, calcium particles, biological particles, soot, cenosphere, sodium chloride, sulphates, metallic particles, iron spherical particles). Aluminosilicates and Calcium particles of rural and urban sites showed a similar nature due to a mainly natural origin, while those of the yard site showed a more heterogeneous composition mainly related to human activity. Biological particles and soot can be differentiated on the bases of the higher loads of Fractal Dimension, which characterizes soot, and content of Na, Mg, Ca, Cl and K which characterize the biological ones. The soot of the urban site showed higher loadings of Roundness and Fractal Dimension than the soot belonging to the yard and rural sites, this was due to the different life time of the particles. The metal particles, characterized mainly by the higher loading of iron, were present in two morphological forms: spherical and angular particles. The first were generated by a fusion process at high temperature, while the second one had crustal origin (those characterized by typical terrigenous elements) and also human origin.
Conclusion
In this work a protocol for the morphological-chemical characterization of single particles has been developed. SEM analysis allows to classify particles in 10 different families and PCA and HCA have provided information about the sources of PM and similarities and differences among the sites.
Green approach in synthesizing metal nanoparticles has gain new interest from the researchers as metal nanoparticles were widely applied in medical equipment and household products. The use of plants in the synthesis of nanoparticles emerges as a cost effective and eco-friendly approach. A green synthetic route for the production of stable silver nanoparticles (Ag-NPs) by using aqueous silver nitrate as metal precursor and Artocarpus elasticus stem bark extract act both as reductant and stabilizer is being reported for the first time.
Results
The resultant Ag-NPs were characterized by UV–vis spectroscopy, powder X-Ray diffraction, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier-transform infra-red (FT-IR). The morphological study by TEM and SEM shows resultant Ag-NPs in spherical form with an average size of 5.81 ± 3.80, 6.95 ± 5.50, 12.39 ± 9.51, and 19.74 ± 9.70 nm at 3, 6, 24, and 48 h. Powder X-ray diffraction showed that the particles are crystalline in nature, with a face-centered cubic structure. The FT-IR spectrum shows prominent peaks appeared corresponds to different functional groups involved in synthesizing Ag-NPs.
Conclusions
Ag-NPs were synthesized using a simple and biosynthetic method by using methanolic extract of A. elasticus under room temperature, at different reaction time. The diameters of the biosynthesis Ag-NPs depended on the time of reaction. Thus, with the increase of reaction time in the room temperature the size of Ag-NPs increases. From the results obtained in this effort, one can affirm that A. elasticus can play an important role in the bioreduction and stabilization of silver ions to Ag-NPs.
