The electro-optic properties of colloidal silica filled nematics

The optical and electro-optical properties of filled nematic liquid crystals, nematic systems with added colloidal silica nanoparticles (? 6%), have been studied. The macroscopic near IR birefringence of cells constructed from these materials was measured for wavelengths between 2 and 5 mum, and a wavelength independent value of 0.16 was obtained. The visible optical behaviour of cells formed with untreated ITO substrates using both filled nematic, and filled nematic and dichroic dyes was similar to those observed in polymer dispersed liquid crystals. At an electric field of 1–2 V μm ^-1, the cells were highly transmitting, while at low fields they were highly scattering. The effects of colloidal silica nanoparticle concentration, cell thickness, electric field and substrate preparation (rubbed polyimide versus no surface treatment) on the electro-optical behaviour of these cells were studied.     

Unusual electro-optical behaviour of the nematic polyacrylate

ABSTRACT

High sensitivity of liquid crystals to the electric field makes them highly demanded and widely used in different applications. Despite the large number of the electro-optical research on the low-molar-mass liquid crystals electro-optics of the liquid crystalline (LC) polymers is much less studied. Herein, the comparative electro-optical behaviour of two nematic comb-shaped polyacrylates with phenylbenzoate mesogenic side groups was studied in detail. These two polyacrylates have completely the same structure of polymer backbone and spacer length but different in the direction of the ester group in the phenylbenzoate fragments. It was found that this difference predetermines their completely opposite electro-optical properties.

The influence of the electric field of different strength and frequency on the orientation of the mesogenic groups of these polymers is studied. It is shown that application of the electric field at temperatures above the glass transition temperature (~25°C) induces reorientation of the mesogenic groups along or perpendicular to the electric field direction depending in its turn on the ester group direction. For one of the polyacrylates an unusual textural transition is found; during cooling of the polymer sample under applied field at definite temperature a sharp change in the mesogen’s orientation from homeotropic to planar one is found. This electro-optical phenomenon is observed for the first time and probably associated with sharp change in sign of anisotropy of dielectric permittivity from positive (at high temperatures) to negative one (at lower temperatures). Kinetics of the electro-optical switching at different temperatures, influence of the molar masses of the polymer and frequency of the applied AC field on electro-optical behaviour of the polymers are studied. The possibility of the fixation of the electroinduced homeotropic alignment of the mesogenic groups by photopolymerisation of the diacrylate dissolved in the polymer is demonstrated.     

The in-plane switching of homogeneously aligned nematic liquid crystals

We have investigated the electro-optical effects and physical switching principle of homogeneously aligned nematic liquid crystals when applying an in-plane electric field with interdigital electrodes. By using the in-plane switching (IPS) of the liquid crystals which is achieved by the in-plane electric field, the viewing angle characteristics of the electro-optical effects were confirmed to be far superior to those of the conventional twisted nematic mode in which the electric field is applied along the direction perpendicular to the substrates. The non-reversal region of grey scales was extremely wide in which a high contrast ratio was kept, even along quite an oblique direction in the IPS mode. In order to clarify the switching principle of the liquid crystals in the IPS mode, a simplified expression describing the threshold behaviour of the device was derived with the assumption that a uniform in-plane electric field was applied along a direction perpendicular to the director and parallel to the homogeneously aligned nematic slab, and found to be sufficiently able to explain the experimental results. First, a critical field at which the liquid crystals just began to twist, was found to be proportional to the reciprocal of the cell gap. Second, it was the electric field and not the voltage that drives the liquid crystals. This relationship was due to the independence of the electric field regarding the liquid crystal layer normal direction. So the threshold voltage in the IPS mode was strongly dependent on the variation of the cell gap. For the dynamical response mechanism of the liquid crystals to the in-plane electric field, the switching on and off processes of the liquid crystals were analysed quantitatively. The relaxation time of the liquid crystals when removing the electric field could be described as proportional to the square of the cell gap. A thinner cell gap also proved to be effective in obtaining a fast response time in the IPS mode. In contrast, the switching on time when applying the in-plane electric field was found to be inversely proportional to the difference between the square of the electric field strength and the square of the critical electric field strength at which the liquid crystals began to deform.     

Kerr effect of low melting nematic liquid crystals with negative dielectric anisotropy

The two low melting nematic liquid crystals, 2-chloro-4-heptylphenyl 4-pentylbicyclo[2,2,2]octane-1-carboxylate (7CP5BOC) and 2-chloro-4-heptylphenyl 4-heptylbicyclo[2,2,2]octane-1-carboxylate (7CP7BOC) have been investigated to determine their electro-optical behaviour and third order non-linearity by the static Kerr effect method. Both liquid crystals are laterally substituted by a single chlorine atom located close to the ester linking group. The temperature dependence of the electric Kerr constant in the isotropic phase and the pretransitional behaviour have been investigated for these low birefringence nematic liquid crystals in the isotropic phase. Both the compounds, with negative dielectric anisotropy, have a positive Kerr constant. The Landau-de Gennes model was obeyed for these compounds.     

Twin nematic phenylbenzoates in a.c. electric fields

The orientational behaviour of nematic compounds having twin phenylbenzoate mesogens was examined under a wide range of a.c. electric fields (0-2 V mum-1 and 10Hz-50 kHz). For this study, crossed polarizing optical microscopy (POM) and real-time X-ray diffraction (RTXRD) measurements were employed to investigate optical and orientational response. These nematic compounds have a positive dielectric anisotropy and a relatively low epsilon// relaxation frequency which allowed study in both homeotropic and planar orientations over a controllable frequency range. The optical behaviour and X-ray results corresponded well, providing a tool for understanding the orientational behaviour of these liquid crystals. For homeotropic alignment, an electric field of over 1 V mum-1 was required in order to obtain good orientation. However, homeotropic orientation depended on a delicate balance between thermal fluctuations and dielectric torque imposed by the electric field, which are both strongly related to the elasticity of the LC domains. Due to this effect, the highest orientation parameter achieved for homeotropic orientation was only 0.48, which indicated that this state was still non-equilibrium. On the other hand, for planar orientation, a uniform texture with orientation parameter of 0.65 was easily obtained even at electric fields as low as 0.2 V mum-1. The application of an electric field stronger than 1 V mum-1 induced a distortion in the texture, and reduced the orientation parameter to 0.45 for planar alignment.     

UV tuning of the electro-optical and morphology properties in polymer-dispersed liquid crystals

Polymer-dispersed liquid crystal (PDLC) films operating in reverse mode are transparent electro-optical devices, which can be turned into an opaque state by application of a suitable electric field. The effect was investigated of different UV powers, used during the polymerization process, on the electro-optical and morphology properties of PDLCs, working in reverse mode operation. Films were obtained by UV polymerization of mixtures of a low molecular weight nematic liquid crystal and a photopolymerizable liquid crystal monomer, homeotropically aligned by rough conductive surfaces. The electro-optical and morphology properties of samples were related to the polymerization conditions. Samples polymerized by lower UV powers exhibited “polymer ball” morphology and an electro-optical response due to the liquid crystal director reorientation, whereas samples obtained at higher UV powers showed a “Swiss cheese” morphology and an electro-optical response due to dynamic scattering. In addition, we observed by conductivity and IR measurements that UV exposure induces a degradation of the nematic liquid crystal.     

Linear and non-linear liquid crystal materials, electro-optical effects and surface interactions. Their application in present and future devices

The structural, material and electro-optical properties of novel, halogenated nematic liquid crystals which contain quite different functional groups are correlated. Synergisms which lead to broad mesophases, low viscosities and large dielectric anisotropies further improve the performance of actively and passively addressed, high information content liquid crystal displays. Some recent developments, such as operation of supertwisted nematic displays with not only linear, but also circularly polarized light, are included. A recently presented, efficient liquid crystal colour projection concept, whose functional elements, i.e. polarizers, filters and modulators, consist entirely of liquid crystal devices, is reviewed. Its circular polarizers and filters are made up of novel, negative dielectric anisotropic cholesteric liquid crystals designed such that, dislocation-free, optically uniform, planar textures result from electric field alignment. Novel, non-linear optical ferroelectric liquid crystals which exhibit very large and stable second order harmonic coefficients d₂₂ = 5 pm V^-1 have the potential to be used in integrated optical devices, such as frequency converters and Pockels modulators. Photopolymerization of polymer-coated substrates with linearly polarized light is shown to induce anisotropic, uniaxial orientation of the polymer side chains without mechanical treatment. The resulting anisotropic dispersive surface interaction forces align adjacent liquid crystal molecules parallel. This new, photoinduced liquid crystal aligning technique renders the generation of azimuthal director patterns possible. It opens up interesting possibilities for realizing new optical and electro-optical devices, including hybrid and stereo liquid crystal displays.     

Memory effect in filled nematic liquid crystals

The irreversible electro-optical response (memory effect) of 'liquid crystal-aerosil' suspensions under the influence of an electric field is investigated. Thereby, the influence of the aerosil concentration on the efficiency of the memory effect is studied. The experimental results are discussed in the frame of a model where the filled nematic is considered as a system of aerosil agglomerates in a liquid crystal matrix stabilized by the forces of liquid crystal orientational elasticity.     

Physical properties of chlorinated liquid crystals

Dielectric, optical and electro-optical properties of four chlorinated nematic liquid crystal compounds and a eutectic mixture were characterized. Some chlorinated liquid crystals are found to exhibit a wide nematic range, modest dielectric and optical anisotropies, low viscosity and small UV absorption. Potential application of mixtures containing chlorinated liquid crystals for information displays in the visible spectral region is foreseeable.     

H-shaped liquid crystals inducing nematic order in the isotropic liquid

ABSTRACT

We prepared a homologous series of H-shaped liquid crystals I-n and investigated their phase transition properties using optical microscopy and differential scanning calorimetry. All the compounds exhibited a nematic phase at room temperature. The phase transition behaviour is explained in terms of molecular shape anisotropy. Furthermore, those compounds were found to exhibit electro-optical switching in the isotropic liquid in the vicinity of the nematic–isotropic liquid transition, indicating that the microscopic nematic order with a certain coherence length of the molecules exists in the optically isotropic temperature range.     

Reverse-mode polymer dispersed liquid crystal films prepared by patterned polymer walls

This article proposes a methodology to prepare polymer dispersed liquid crystal (PDLC) films working in the reverse-mode operation, where the ion-doped nematic liquid crystals (NLCs) with negative dielectric anisotropy (Δε) were locked by polymer walls. On-state and off-state of films were controlled by an electric field. In the absence of an electric field, it appears to be transparent. In the field, the homogeneous alignment NLCs form dynamic scattering, giving rise to opaque. The effect of the cylindrical holes with different diameters of photo masks and liquid crystal Δε on the electro-optical properties and transmittance wavelength range of 400–3000 nm light of samples were investigated. It was found that it exhibited very good electro-optical characteristics, high contrast ratio and excellent infrared energy-efficient of films used as switchable windows.     

Optical phase grating diffraction in a quasistatic electric field biased nematic liquid crystal film

Abstract

It is known that an optical phase grating can be obtained when two mutually coherent laser beams overlap in a nematic liquid crystal. This is mainly due to director reorientation which contributes to a large optical non-linearity. It has been suggested by Herman and Serinko that a phase grating could be obtained in nematic liquid crystals if a D.C. field is used to bias it near the critical orientational Freedericksz transition. A homeotropic MBBA film biased by an electric field at 1 kHz has been studied. Two weak Ar⁺ laser beams were incident normally to the film with a small intersection angle (?0·4?). Using the picture of a director reorientation mechanism and a degenerate four wave mixing scheme, we have obtained the dependence of the diffraction beam intensity on that of the incident beam and the strength of the biased electric field. The theoretical prediction and experimental results both show that the phase grating diffraction can be dramatically enhanced by the coupling of the electric field to the optical field in the Freedericksz transition region. This is due to the critical behaviour of the sample at that transition. The prominently improved signal-to-noise ratio is discussed.     

Star-shaped supramolecular ionic liquid crystals based on pyridinium salts

Series of novel star-shaped liquid crystals containing [1,1?-biphenyl]-4,4?-diyl diisonicotinate mesogens with various counterions (Br^?, B-SO₃^?,C-SO₃^?,H₂PO₄^?, BF₄^?) have been synthesized and characterized, which display a nematic phase. The molecular structures of the liquid crystals, thereof consisting of rod-like mesogens linked together by different long alkyl spacers to a small disc-like core of central benzene-1,3,5-triyl triisonicotinate, have been fully characterized by ¹H NMR. Their thermal and supramolecular organization behaviours have been studied by combining polarized optical microscopy, differential scanning calorimetry and small-angle X-ray scattering. These investigations showed that the mesophase temperature range increased with increasing alkyl chain length and the clearing point decreased with increase of anion size. These star-shaped liquid crystals have a long and ordered molecular structure, the electron delocalization of the π-π stacking conjugation effect and the electrostatic attraction of ionic make them have good ferroelectric properties and ionic conductivity properties. The interest in preparing ionic liquid crystal with a nematic phase lies in the technological applications as it is well known that the nematic phase has the highest fluidity of all liquid crystalline phases and hence the possibility to align it by applying an external electric/magnetic field, commonly used in electro-optical devices.     

A small-angle X-ray scattering study of nanoparticle assembly in an aligned nematic liquid crystal

The assembly of colloidal particles in a nematic liquid crystal has been investigated using small-angle X-ray scattering. The structure and orientation of nanoparticle assemblies in bulk samples of aligned nematic liquid crystal have been determined. The method offers some advantages over optical microscopy, which is usually restricted to investigations of thin cells and micron-sized particles. The scattering from chains of particles has been calculated, and comparison with experimental results has shown that suspensions of 48 and 105 nm diameter silica nanoparticles formed highly ordered structures perpendicular to the liquid crystal director, consistent with quadrupolar defect-induced assembly.     

Ferroelectric liquid crystal composites based on the porous stretched polyethylene films

Electro-optically active polymer–liquid crystal composites based on ferroelectric liquid crystals and stretched porous polyethylene films were developed. The alignment of ferroelectric liquid crystals incorporated into the porous polyethylene films with average porous diameter of around 200 nm was observed and studied. It was shown experimentally that these samples containing ferroelectric liquid crystals are flexible electro-optical films exhibiting a saturation electric field near 2·10⁷ Vm^?1 and a response time of about 30 μs under the action of the saturation field. A simple theoretical model of ferroelectric liquid crystal molecules' complete reorientation in electric fields inside pores of the films has been proposed and confirmed experimentally.     

Advanced electro-optical smart window based on PSLC using a photoconductive TiOPc electrode

This study demonstrates an electro-optical controllable smart window based on a liquid crystal device. The device integrates a photoconductive electrode based on TiOPc films into a liquid crystal shutter based on polymer-stabilised homeotropic aligned nematic liquid crystals (PSLC) connecting in series. The PSLC light shutter is transparent in electric field-off state; it scatters light as it switches to multi-domain structures in electric field-on states. The TiOPc film has an optically controllable impedance that manipulates the electric field on the PSLC film. The window transits into multi-transmission states according to the intensities of exposure light with an extra applied bias voltage.     

Dielectric and electro-optic behaviour of nematic-SWCNT nanocomposites under applied bias field

We have prepared the composites of a room temperature Nematic Liquid Crystals and Single-Walled Carbon Nanotubes. Effect of dispersion of nanotubes on various dielectric and electro-optic parameters on host nematic liquid crystals were investigated. The changes in dielectric and electro-optic parameters (viz: relative permittivity, dielectric anisotropy, switching threshold voltage and splay elastic constant) were observed for composite systems. The composites filled in the cells have been probed under applied bias electric field and it enhanced the nematic ordering of the liquid crystal molecules in the composites which results overall improvement of dielectric and electro-optic parameters of the prepared composites.     

Complex study of reorientational dynamics of the liquid crystal in PDLC films

Morphological, electro-optical and switching properties of polyester resin/nematic liquid crystal composite films have been studied for varying composition (10-40 wt% of LC), temperature (20-50 C), film thickness (10-75 mum) and UV curing time of the matrix (0.25-12 min). The PDLC films were formed by LC separation in a UV polymerization process of the thin layer of oligoester resin (liquid crystal mixture) between ITO coated glass plates. The electro-optical and response behaviour based on the electric field controlled light scattering of the composite films was observed. The results were interpreted in terms of effective anchoring strength at the interface of the polymer and liquid crystal depending either on the area fraction of the interface in the composite film (dependent on the size and shape of the liquid crystal droplets) or the stiffness and resistivity of the polyester resin changing in the course of the crosslinking polymerization.     

Liquid-crystalline physical gels

Liquid-crystalline (LC) physical gels are a new class of dynamically functional materials consisting of liquid crystals and fibrous aggregates of molecules that are called "gelators". Liquid-crystalline physical gels, which are macroscopically soft solids, exhibit induced or enhanced electro-optical, photochemical, electronic properties due to the combination of two components that form phase-separated structures. In this tutorial review, we describe the materials design and structure-property relationships of the LC physical gels. The introduction of self-assembled fibers into nematic liquid crystals leads to faster responses in twisted nematic (TN) mode and high contrast switching in light scattering mode. Furthermore, the LC physical gels can be exploited as a new type of materials for electro-optical memory. This function is achieved by the control of reversible aggregation processes of gelators under electric fields in nematic liquid crystals. Electronic properties such as hole mobilities are improved by the introduction of fibrous aggregates into triphenylene-based columnar liquid crystals. The incorporation of photochromic azobenzenes or electroactive tetrathiafulvalenes into the chemical structures of gelators leads to the preparation of ordered functional materials.