Enthalpy change and mechanism of oxidation of o-phenylenediamine by hydrogen peroxide catalyzed by horseradish peroxidase

The hydrogen peroxide-oxidation of o-phenylenediamine (OPD) catalyzed by horseradish peroxidase (HRP) at 37 °C in 50 mM phosphate buffer (pH 7.0) was studied by calorimetry. The apparent molar reaction enthalpy with respect to OPD and hydrogen peroxide were −447 ± 8 kJ mol⁻¹ and −298 ± 9 kJ mol⁻¹, respectively. Oxidation of OPD by H₂O₂ catalyzed by HRP (1.25 nM) at pH 7.0 and 37 °C follows a ping-pong mechanism. The maximum rate V_max (0.91 ± 0.05 μM s⁻¹), Michaelis constant for OPD K_m,S (51 ± 3 μM), Michaelis constant for hydrogen peroxide Km,H₂O₂ (136 ± 8 μM), the catalytic constant k_cat (364 ± 18 s⁻¹) and the second-order rate constants k₊₁ = (2.7 ± 0.3) × 10⁶ M⁻¹ s⁻¹ and k₊₅ = (7.1 ± 0.8) × 10⁶ M⁻¹ s⁻¹ were obtained by the initial rate method.     

A very sensitive flow system for the direct determination of copper in natural waters based on spectrophotometric detection

A very sensitive flow injection method with spectrophotometric detection has been developed for the on-line determination of copper in natural waters. The method exhibits a limit of detection three times lower than the most sensitive direct spectrophotometric method previously described and then allows the direct and simple in situ determination of copper in most natural waters.The method was based on the measurement of the absorbance of the coloured complex formed by copper with the chromogenic reagent di-2-pyridyl ketone benzoylhydrazone (dPKBH) in an alkaline medium. This complex presents stoichiometry 1:2 (Cu:dPKBH), and exhibits maximum absorbance at 370 nm. The manifold used was very simple, and consisted of two channels. The first one contained the sample while the second one contained the colorimetric reagent (3.3×10⁻⁴ M dPKBH in 10% ethanol), in a 1.6×10⁻² M phosphate buffer solution at pH 8. The performance of the system was optimised by using both univariate and modified simplex methodologies. When modified simplex was used, the best signal was obtained for a sample injection volume of 529 μl, a reaction coil length of 1.29 m, and a reagent flow rate of 4.8 ml min⁻¹. Under optimum conditions, the response was linear up to 3 mg l⁻¹ copper, the equation of the straight line being y=0.314x+5.2×10⁻⁴ (r²=0.998). The method allowed a sampling frequency of 40 samples per hour and exhibited a precision of 2.11% (as R.S.D., n=11). The limit of detection was 4.6 μg l⁻¹ (calculated as 3s_b/m, where s_b is the standard deviation of the y-intercept and m represents the slope of the straight line), and was therefore more sensitive than all the direct continuous methods reported previously.The method was successfully applied to the analysis of real water samples, with an average relative error of 5.32%.     

Measurement of ordered associate of protonated tetraphenylporphine formed at toluene/aqueous H2SO4 interface by attenuated total internal reflection spectroscopy with polarized light

Attenuated total internal reflection (ATR) spectroscopy with an s- or p-polarized visible light was examined for some species of protonated 5,10,15,20-tetraphenylporphine (tpp) at toluene/aqueous H₂SO₄ (3-6 mol dm⁻³) interface. Tpp initially dissolved in the toluene phase was diprotonated at the interface to form monomeric H₂tpp²⁺, the absorption peak of which was 438 nm. At the same time, a long H₂tpp²⁺ oligomer was formed, the absorption peak of which was 448 nm. The two interfacial species were transient. Just after their disappearance, a rod-shaped H₂tpp²⁺ associate was formed at the interface, the absorption peak of which was 417 and 478 nm. The former and latter wavelengths corresponded to H- and J-bands of the associate, respectively. Theoretical calculation of the strength of electric field of light at the interface allowed one to estimate the interfacial concentration of the three species with measured reflection absorbance (A_R). The monomeric H₂tpp²⁺ and its oligomer were at sub-monolayer levels, whereas the associate was at a multilayer level. Reflection absorption anisotropy (K_R), which was calculated from A_R with the s- and p-polarized lights, was adopted for the evaluation of out-of-plane orientation of the interfacial species for the first time. The K_R value suggested that the rod-shaped associate lay at the interface.     

Mn(II)-sodium dodecyl sulphate complex mimic enzyme-catalyzed fluorescence quenching of Pyronine B by hydrogen peroxide

Mn(II)-sodium dodecyl sulphate complex (Mn(II)-SDS) is used to mimic the active group of peroxidase. The catalytic characteristic of this mimic enzyme catalyst in the oxidation reaction of fluorescence substrate, tetraethyldiaminoxanthyl chloride (Pyronine B (PB)), with hydrogen peroxide has been studied. The experimental results show that Mn(II)-SDS complex has similar catalytic activity that of peroxidase. The steady-state catalytic rate depends upon mimic enzyme and substrate concentrations, and the Michaelis-Menten parameters K_m, V_max and K_cat are 7.6×10⁻⁶ M, 7.9×10⁻⁷ M s⁻¹ and 7.9 s⁻¹, respectively. The catalytic activity of Mn(II)-SDS complex is compared with those of HRP and Hemin. Though the catalytic activity of Mn(II)-SDS complex is 15.9% of that of HRP, it can catalyze the oxidation reaction of PB with hydrogen peroxide lead to fluorescence quenching of PB. Under optimum conditions, linear relationship between fluorescence quenching F₀/F and concentration of H₂O₂ is in the range of (0.0-3.6) × 10⁻⁷ M. The detection limit is determined to be 3.0×10⁻⁹ M. By coupling this mimic catalytic reaction with the catalytic reaction of glucose oxidase (GOD), glucose can be detected. Linear relationship between F₀/F and concentration of glucose is in the range of (0.0-1.4) × 10⁻⁷ M. The detection limit is determined to be 4.2×10⁻⁹ M. This method is applied to the determination of glucose in human serum and the results are in good agreement with the phenol-4-aminoantipyrine (4-AAP).     

Synthesis of a new type of dibenzopyrromethene-boron complex with near-infrared absorption property

A new type of π-extended 4-bora-3a,4a-diaza-s-indacene (BODIPY dye), bis(isoindole)-derived benzo[1,3,2]oxazaborinine 1, has been synthesized by seven-step procedure from 2-methoxybenzoic acid methyl ester. The benzannulation of the pyrrole ring and the formation of a structurally strained intramolecular B-O ring enable the dye to absorb near-infrared light at ca. 750 nm with a molecular extinction coefficient (ε) of ca 8.3 × 10⁴ M⁻¹ cm⁻¹ in THF. The absorption properties are discussed on the basis of DFT calculations. Interestingly, a film of 5,5-dihexyloxy derivative 1b, which was fabricated by a spin-coating procedure on a glass plate, exhibited a dramatic bathochromic shift of absorbance as compared to the solution, with λ_max of 922 nm.     

Use of UV-visible spectroscopy to monitor nitrocellulose degradation in thin films

Activation energies for nitrocellulose (NC) degradation have been determined from Arrhenius plots constructed using first-order rate constants measured at 40, 50 and 60 °C. The rate constants were obtained by monitoring the absorbance (A) at a wavelength in the visible region of an anthraquinone dye dispersed in NC thin films. The dye acts as a stabilizer and is slowly depleted as a result of its reaction with NO_x from the breakdown of the nitrate ester groups on NC. The data produced two linear regions in the first-order plots of ln(A₀/A_t) vs aging time. The first-region is attributed to the reaction of the dye with NO_x desorbed from the NC surface. The activation energy (∼73.5 kJ mol⁻¹) is in line with that found for NO_x surface desorption processes. The second linear region is thought to be due to the reaction of NO_x from the breakdown of the nitrate ester groups on the NC molecule. The activation energy (∼104.0 kJ mol⁻¹) is consistent with that for nitrate ester hydrolysis. The use of UV-visible spectroscopy has in this way made it possible to monitor the degradation of NC non-destructively without the need for stabilizer extraction and analysis.     

Crystal structures of CsFe2S3 and RbFe2S3: synthetic analogs of rasvumite KFe2S3

The isostructural alkali thioferrate compounds CsFe₂S₃, RbFe₂S₃ and KFe₂S₃ have been synthesized by reacting Fe and S with their corresponding AFeS₂ (A=K, Rb, Cs) precursors. The crystal structures of these and binary compounds of intermediate composition were determined by Rietveld analysis of laboratory powder X-ray diffraction patterns. All of the synthesized compounds adopt the space group Cmcm (#63), Z=4 with: a=9.5193(8) Å, b=11.5826(10) Å, c=5.4820(4) Å for CsFe₂S₃; a=9.2202(7) Å, b=11.2429(9) Å, c=5.4450(3) Å for RbFe₂S₃; and a=9.0415(13) Å, b=11.0298(17) Å, c=5.4177(6) Å for KFe₂S₃. These mixed valence alkali thioferrates show regular changes in cell dimensions, AS₁₀ (A=K, Rb, Cs) polyhedron volumes, polyhedron distortion parameters, and calculated oxidation state of Fe with respect to increasing size of the alkali element cation. The calculated empirical oxidation state of iron varies from +2.618 (CsFe₂S₃), through +2.666 (RbFe₂S₃) to +2.77 (KFe₂S₃).     

Kinetic study of the oxidative addition reaction between methyl iodide and [Rh(FcCOCHCOCF3)(CO)(PPh3)]: Structure of [Rh(FcCOCHCOCF3)(CO)(PPh3)(CH3)(I)]

The kinetics of oxidative addition of CH₃I to [Rh(FcCOCHCOCF₃)(CO)(PPh₃)], where Fc = ferrocenyl and (FcCOCHCOCF₃)⁻ = fctfa = ferrocenoylacetonato, have been studied utilizing UV/Vis, IR, ¹H and ³¹P NMR techniques. Three definite sets of reactions involving isomers of at least two distinctly different classes of Rh^III-alkyl and two different classes of Rh^III-acyl species were observed. Rate constants for this reaction in CHCl₃ at 25 °C, applicable to the reaction sequence below, were determined as k₁ = 0.00611(1) dm³ mol⁻¹ s⁻¹, k₋₁ = 0.0005(1) s⁻¹, k₃ = 0.00017(2) s⁻¹ and k₄ = 0.0000044(1) s⁻¹ while k₋₃ ? k₃ and k₋₄ ? k₄ but both ≠0. The indeterminable equilibrium K₂ was fast enough to be maintained during Rh^I depletion in the first set of reactions and during the Rh^IIIalkyl2 formation in the second set of reactions. From a ¹H and ³¹P NMR study in CDCl₃, K_c1 was found to be 0.68, K_c2 = 2.57, K_c3 = 1.00, K_c4 = 4.56 and K_c5 = 1.65.     

Aggregation phenomena of linear and miktoarm star copolymers of styrene and dimethylsiloxane: Influence of the architecture

The micellar behavior of PS-b-PDMS, PS-b-PDMS-b-PS linear block and (PS)₂(PDMS) miktoarm star copolymers of polystyrene (PS) and polydimethylsiloxane (PDMS) is investigated in DMF, a selective solvent for PS. The linear PS-b-PDMS and star (PS)₂(PDMS) copolymers exhibit different macromolecular architectures but similar compositions and total molecular weight, while the linear PS-b-PDMS-b-PS copolymer has the same composition as the diblock and miktoarm star but double their molecular weight. Static, dynamic light scattering and viscometry were used for the structural characterization of the micelles. Aggregation numbers were found to increase in the order PS-b-PDMS-b-PS < (PS)₂(PDMS) < PS-b-PDMS. The corona thickness was dependent on the molecular weight of the soluble PS chains. In the case of (PS)₂(PDMS), although the core area per PS chain, A_C, was significantly lower than that of the linear copolymers, the coronal chains were not significantly stretched. This can be attributed to the stiff nature of the PS chains, which maintains the elongated form of the chains.     

Mesoporous silica hollow sphere (MSHS) for the bioelectrochemistry of horseradish peroxidase

In this work, novel mesoporous silica hollow spheres (MSHS) were chosen as an immobilization matrix, to construct a mediator-free third-generation HRP biosensor. UV-vis spectroscopy revealed that horseradish peroxidase (HRP) entrapped in MSHS could retain its native structure. FTIR spectroscopy and nitrogen adsorption-desorption isotherms indicated that HRP are intercalated into the mesopores. The direct electron transfer of HRP entrapped in MSHS was observed. A pair of stable and well-defined redox peaks of HRP with a formal potential of about −0.150 V (vs. Ag/AgCl) in 0.1 M pH 7.0 phosphate-buffered solution (PBS) were obtained. The biosensor exhibited a fast amperometric response to H₂O₂ with a linear range of 3.9 × 10⁻⁶ to 1.4 × 10⁻⁴ M (R = 0.997, N = 20). The detection limit was 1.2 × 10⁻⁶ M based S/N = 3.     

Crystal structure and phase transitions in perovskite-like C(NH2)3SnCl3

X-ray single-crystal diffraction, high-temperature powder diffraction and differential thermal analysis at ambient and high pressure have been employed to study the crystal structure and phase transitions of guanidinium trichlorostannate, C(NH₂)₃SnCl₃. At 295 K the crystal structure is orthorhombic, space group Pbca, Z=8, a=7.7506(2) Å, b=12.0958(4) Å and c=17.8049(6) Å, solved from single-crystal data. It is perovskite-like with distorted corner-linked SnCl₆ octahedra and with ordered guanidinium cations in the distorted cuboctahedral voids. At 400 K the structure shows a first-order order-disorder phase transition. The space group is changed to Pnma with Z=4, a=12.1552(2) Å, b=8.8590(2) Å and c=8.0175(1) Å, solved from powder diffraction data and showing disordering of the guanidinium cations. At 419 K, the structure shows yet another first-order order-disorder transformation with disordering of the SnCl₃⁻ part. The space group symmetry is maintained as Pnma, with a=12.1786(2) Å, b=8.8642(2) Å and c=8.0821(2) Å. The thermodynamic parameters of these transitions and the p-T phase diagram have been determined and described.     

Uric acid determination using uricase and the autotransducer molecular absorption properties of peroxidase

Uric acid (UA) is determined using the UV-vis molecular absorption properties of peroxidase (HRP). The method as a whole involves UA oxidation in the presence of uricase (UOx), giving H₂O_2. The H₂O₂ then reacts with HRP forming the compound I species which returns to its initial form by reaction with UA and intramolecular reduction. The molecular absorption changes of HRP at 420 nm during the reaction enable the UA to be determined. A mathematical model relating the analytical signal to UA, UOx and HRP has been developed and experimentally validated. The possibility of carrying out both enzymatic reactions sequentially or simultaneously is discussed, the latter option producing better analytical performances. The method permits UA determination in the range 1.5 × 10⁻⁶-4.0 × 10⁻⁵ M, with an R.S.D. of about 3% (n = 5, 1.5 × 10⁻⁶ M UA). It has been applied to analyte determination in synthetic serum samples.     

Use of biotin-streptavidin system for developing a viable, sensitive and specific antigen heterologous assay for hapten

The present study demonstrates improvement in sensitivity and specificity of hapten assay by using antigen heterology in conjunction with low molecular weight biotin label as compared to high molecular weight horseradish peroxidase (HRP) label. For generation of antiserum, cortisol-3-O-carboxylmethyl-oxime-bovine serum albumin (F-3-CMO-BSA) was used as immunogen whereas, for the preparation of primary label, corticosterone-3-carboxymethyl oxime (B-3-CMO) was coupled with biotinylcaproylhydrazide and HRP by employing N-hydroxysuccinimide mediated carbodiimide reaction. The data of the present study revealed that the antigen heterologous assay which employed high molecular weight HRP label showed 100% cross-reaction with corticosterone. On the contrary, when HRP was replaced with low molecular weight biotin label, less than 0.1% cross-reaction was observed with all analogous C₁₈, C₁₉, C₂₁ and C₂₇ steroids including corticosterone (0.2%). Moreover, the sensitivity of the later assay was 0.09 μg/dL, which is appreciable as compared to previously reported enzyme based assays. The recovery of the exogenously spiked serum pools lies in the range of 90.3-104.2%. The intra-assay and inter-assay coefficient of variation (CVs) ranged from 3.3% to 7.8% and 2.3% to 7.7%, respectively. The serum cortisol values obtained by this method correlated well with those obtained by radioimmunoassay; r = 0.9 (n = 50). The use of much stable biotin label in place of HRP has made the antigen heterologous enzyme linked immunosorbent assay (ELISA) of cortisol assay highly specific and sensitive.     

Highly selective determination of total mercury(II) sub microgram per liter by β-cyclodextrin polymer solid-phase spectrophotometry using 1,3-di-(4-nitrodiazoamino)-benzene

A highly selective β-cyclodextrin polymer solid-phase spectrophotometric (β-CDPSPS) method is described for the determination of total mercury(II) sub microgram per liter. The methods are based on the chromogenic reaction of mercury(II) with 1,3-di-(4-nitrodiazoamino)-benzene (DNAAB) loaded on β-cyclodextrin polymer (β-CDP). In pH 10.0 borax buffer, Hg(II)-DNAAB complex on β-CDP gives a positive peak at 445 nm and a negative one at 545 nm. The absorbance was measured at two peaks and the net absorbance (A_s) was calculated between the difference of positive and negative peaks. The apparent molar absorptivity is 1.1 × 10⁷ l mol⁻¹ cm⁻¹ (82-fold of it in solution) for 100 ml sample and the linear range of the determination is 0.062-250 μg l⁻¹. The selectivity for coexistent ions was greatly improved, only silver(I) interfered with the mercury determination and the amount of the others was reduced 25-1000 times compared to previous solution method. The interference caused by silver(I) can be eliminated using tri-n-octylmethylammonium bromide as masking agent. The detection limit and the quantification limit were found to be 0.024 and 0.062 μg l⁻¹, respectively. The relative standard deviation of ten replicate determinations of 5.0 μg mercury(II) in 100 ml sample was of 2.4%. The method was validated by analyzing the water and soil reference materials and successfully applied to the determination of mercury(II) in locally collected water and dust samples.     

Structural studies of phosphor-1,1-diselenoato Mn(I) and Re(I) complexes

Mononuclear complexes of the type, M(CO)₄[Se₂P(OR)₂] (M = Mn, R = ⁱPr, 1a; Et, 1b; M = Re, R = ⁱPr, 3a; Et, 3b) can be prepared from either [-Se(Se)P(OⁱPr)₂]₂ (A) or [Se{-Se(Se)P(OEt)₂}₂] (B) with M(CO)₅Br. O,O′-dialkyl diselenophosphate ([(RO)₂PSe₂]^-, abbreviated as dsep) ligands generated from A and B act as a chelating ligand in these complexes. Upon refluxing in acetonitrile, these mononuclear complexes yield dinuclear complexes with a general formula of [M₂(CO)₆{Se₂P(OR)₂}₂] (M = Mn, R = ⁱPr, 2a; Et, 2b; M = Re, R = ⁱPr, 4a; Et, 4b). Dsep ligands display a triconnective, bimetallic bonding mode in the dinuclear compounds and this kind of connective pattern has never been identified in any phosphor-1,1-diselenoato metal complexes. Compounds 2b, 3b, and 4 are structurally characterized. Compounds 2b and 3b display weak, secondary Se?Se interactions in their lattices.     

Crystal growth and structural investigation of A2BReO6 (A=Sr, Ba; B=Li, Na)

Single crystals of the double perovskite rhenates A₂BReO₆ (A=Sr, Ba; B=Li, Na) were grown out of molten hydroxide fluxes. Single crystals of orange/yellow Ba₂LiReO₆, Ba₂NaReO₆ and Sr₂LiReO₆ were solved in the cubic, Fm-3m space group with a=8.1214(11) Å, 8.2975(3) Å, and 7.9071(15) Å, respectively, while Sr₂NaReO₆ was determined to be monoclinic P2₁/n with a=5.6737(6) Å, b=5.7988(6) Å, c=8.0431(8) Å, and β=90.02(6) °. The cubic structure consists of a rock salt lattice of corner-shared ReO₆ and MO₆ (M=Li, Na) octahedra which, in the monoclinic structure, are both tilted and rotated. A discrepancy exists between the symmetry of Sr₂LiReO₆ indicated by the single-crystal refinement of flux-grown crystals (cubic, Fm-3m) and the symmetry indicated by the powder diffraction data collected on polycrystalline samples prepared by the ceramic method (tetragonal, I4/m). It is possible that the cubic crystals are a kinetic product that forms in small quantities at low temperatures, while the powder represents the more stable polymorph that forms at higher reaction temperature.     

Isothermal and polythermal kinetics of depolymerization of C60 polymers

Isothermal depolymerization of the two polymers of C₆₀, i.e. of 1D orthorhombic phase (O) and of “dimer state” (DS) have been studied by means of Infra-red spectroscopy in the temperature ranges 383-423 and 453-503 K, respectively. Differential Scanning Calorimetry (DSC) has been used to obtained depolymerization polytherms for O-phase and DS. Standard set of reaction models have been applied to describe depolymerization behavior of O-phase and DS. The choice of the reaction models was based primarily on the isotherms. Several models however demonstrated almost equal goodness of fit and were statistically indistinguishable. In this case we looked for simpler/more realistic mechanistic model of the reaction. For DS the first-order expression (Mampel equation) with the activation energy E_a = 134 ± 7 kJ mol⁻¹ and preexponential factor ln(A/s⁻¹) = 30.6 ± 2.1, fitted the isothermal data. This activation energy was nearly the same as the activation energy of the solid-state reaction of dimerization of C₆₀ reported in the literature. This made the enthalpy of depolymerization close to zero in accord with the DSC data on depolymerization of DS. Mampel equation gave the best fit to the polythermal data with E_a = 153 kJ mol⁻¹ and preexponential factor ln(A/s⁻¹) = 35.8. For O-phase two reasonable reaction models, i.e. Mampel equation and “contracting spheres” model equally fitted to the isothermal data with E_a = 196 ± 2 and 194 ± 8 kJ mol⁻¹, respectively and ln(A/s⁻¹) = 39.1 ± 0.5 and 37.4 ± 0.2, respectively and to polythermal data with E_a = 163 and 170 kJ mol⁻¹, respectively and ln(A/s⁻¹) = 32.5 and 29.5, respectively.     

Simultaneous enzymatic kinetic determination of pesticides, carbaryl and phoxim, with the aid of chemometrics

A sensitive and selective enzymatic kinetic method for the simultaneous determination of mixtures of carbaryl and phoxim pesticides was researched and developed. It was based on the inhibitory effect of the pesticides on acetylcholinesterase (AChE), and the use of 5,5′-dithiobis(2-nitrobenzoic) acid (DTNB) as a chromogenic reagent for the thiocholine iodide (TChI) released from the acetylthiocholine iodide (ATChI) substrate. The DTNB-thiocholine reaction was investigated by a spectrophotometric-kinetic approach. The complex rate equation for the formation of the chromogenic product, P, was solved under certain experimental conditions, which enabled the absorbance (A_P, at λ_max = 412 nm) from the mixtures of the two pesticide inhibitors to be directly related to their concentrations provided the absorbance additivity was followed. The spectra were measured for mixtures of carbaryl and phoxim at different concentrations, and at t = 904 s, T = 35 °C, pH = 7.5, c_ATChI = 0.14, and c_AChE = 0.10 mg mL⁻¹. The detection limits of the enzymatic kinetic spectrophotometric procedures for the determination of the carbaryl and phoxim were 4.7 and 0.59 μg L⁻¹, respectively.Calibration models for chemometrics methods, such as principal component regression (PCR), partial least squares (PLS) and radial basis function-artificial neural network (RBF-ANN) were constructed and verified with synthetic samples of the mixtures of the two pesticides. The best performing model was based on the RBF-ANN method yielding at approximately 10 ppb analyte concentrations, %RPE_T (carbaryl = 5.2; phoxim = 6.5), %Recovery (approx.105%) and %RPE_T (6.5). Various spiked town-water samples produced recoveries in the range of 98.8-103% for each pesticide.     

Quaternary selenostannates Na2−xGa2−xSn1+xSe6 and AGaSnSe4 (A=K, Rb, and Cs) through rapid cooling of melts. Kinetics versus thermodynamics in the polymorphism of AGaSnSe4

The quaternary alkali-metal gallium selenostannates, Na_2−xGa_2−xSn_1+xSe₆ and AGaSnSe₄ (A=K, Rb, and Cs), were synthesized by reacting alkali-metal selenide, Ga, Sn, and Se with a flame melting-rapid cooling method. Na_2−xGa_2−xSn_1+xSe₆ crystallizes in the non-centrosymmetric space group C2 with cell constants a=13.308(3) Å, b=7.594(2) Å, c=13.842(3) Å, β=118.730(4)°, V=1226.7(5) Å³. α-KGaSnSe₄ crystallizes in the tetragonal space group I4/mcm with a=8.186(5) Å and c=6.403(5) Å, V=429.1(5) Å³. β-KGaSnSe₄ crystallizes in the space group P2₁/c with cell constants a=7.490(2) Å, b=12.578(3) Å, c=18.306(5) Å, β=98.653(5)°, V=1705.0(8) Å³. The unit cell of isostructural RbGaSnSe₄ is a=7.567(2) Å, b=12.656(3) Å, c=18.277(4) Å, β=95.924(4)°, V=1741.1(7) Å³. CsGaSnSe₄ crystallizes in the orthorhombic space group Pmcn with a=7.679(2) Å, b=12.655(3) Å, c=18.278(5) Å, V=1776.1(8) Å³. The structure of Na_2−xGa_2−xSn_1+xSe₆ consists of a polar three-dimensional network of trimeric (Sn,Ga)₃Se₉ units with Na atoms located in tunnels. The AGaSnSe₄ possess layered structures. The compounds show nearly the same Raman spectral features, except for Na_2−xGa_2−xSn_1+xSe₆. Optical band gaps, determined from UV-Vis spectroscopy, range from 1.50 eV in Na_2−xGa_2−xSn_1+xSe₆ to 1.97 eV in CsGaSnSe₄. Cooling of the melts of KGaSnSe₄ and RbGaSnSe₄ produces only kinetically stable products. The thermodynamically stable product is accessible under extended annealing, which leads to the so-called γ-form (BaGa₂S₄-type) of these compounds.