Quantum chemical calculation of the band structure parameters for (TMTSF)2PF6

The semiempirical method SCF MO LCAO in the CNDO/S valence approximation is used to study thiotetramethylselenofulvalene (TMTSF)₂ dimers. Band structure parameters are calculated for (TMTSF)₂PF₆.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 28, No. 2, pp. 136–139, March–April, 1992.     

Kinetics and mechanism of formation of tetrachloropalladate(II) in the reactions of bis(oxalato)- and bis(malonato) palladate(II) with chloride in acid media

Summary Kinetics of formation of [PdCl₄]^2– from [Pd(ox)₂]^2– and [Pd(mal)₂]^2– has been studies in aqueous acid media in the presence of an excess of chloride ion by stopped-flow spectrophotometry. Both the complexes undergo the transformation in two well separated consecutive steps. In 0.02–0.05 M acid with 0.2 M Cl^–, Pd(AA)^2– dissociates leading to the formation of [Pd(AA)Cl₂]^2– (where AA =ox^2– or mal^2–), which in 0.1–0.6 M acid and 1 M Cl^– forms [PdCl₄]^2– in a relatively slow step. For both steps k_abs=k₀+k₂[H⁺][Cl^–]. Activation parameters corresponding to k₀ and k₂ have been determined. Results indicate that [Pd(mal)₂]^2– is much more labile to substitution than [Pd(ox)₂]^2– and for both the lability is far greater than that of [Pd(bigH)₂]²⁺ and [Pt(ox)₂]^2– reported earlier.     

Trace determination of TeO42?, TeO32?, AsO2? and VO3? by differential pulse polarography and resolution of binary and ternary mixtures of selected oxyanions

Summary A differential pulse polarographic method has been applied to the determination of trace concentrations of TeO ₄ ^2– , TeO ₃ ^2– , AsO ₂ ^– and VO ₃ ^– . The dependence of the differential pulse peak on various parameters was studied and optimum conditions for the analytical determination of these oxyanions were found. Limits of detection and quantitation have been calculated for the differential pulse polarographic determination of the investigated oxyanions. The selectivity of this technique for the determination of binary (TeO ₄ ^2– -TeO ₃ ^2– , TeO ₄ ^2– -AsO ₂ ^– and TeO ₄ ^2– -VO ₃ ^– ) mixtures and a ternary (TeO ₄ ^2– -TeO ₃ ^2– -AsO ₂ ^– ) mixture has also been reported.

---

Spurenbestimmung von TeO ₄ ^2– , TeO ₃ ^2– , AsO ₂ ^– und VO ₃ ^– durch Differential-Puls-Polarographie und Trennung binÄrer sowie ternÄrer Gemische von ausgewÄhlten Oxyanionen

     

Coordination chemistry of poly(1-pyrazolyl)alkanes,part IV. Copper(II) complexes of bis- and tris-(1-pyrazolyl)methane

Summary The reactions of some copper(II) salts with bis(1-pyrazolyl)methane, H₂Cbpz, bis(3,5-dimethylpyrazolyl)methane, H₂Cbdmpz, and tris(1-pyrazolyl)methane, HCtpz give the following solid complexes: CuLX₂ · nH₂O (L=H₂Cbpz, H₂Cbdmpz or HCtpz; X=Cl^–, Br^–, NO ₃ ^– , OAc^–, or 1/2 SO ₄ ^2– and n=0, 1, 3 or 5) and CuL₂X₂ · nH₂O (L=HCtpz, X= C^–, Br^–, NO ₃ ^– or ClO ₄ ^– and n=0 or 2). The complexes have been characterised by elemental analysis, visible and i.r. spectral measurements.The reactions of Cu(HCtpz)X₂ · nH₂O (X=Cl^– or Br^–) with acetylacetonate (acac^–), dialkyldithiocarbamate (S₂CNMe ₂ ^– , S₂CNEt ₂ ^– ) or poly(1-pyrazolyl)borate (H₂Bbpz^–, HBtpz^–) in aqueous solutions lead to the displacement of HCtpz and the subsequent formation of neutral [Cu(acac)₂], [Cu(S₂CNR₂)₂], [Cu(H₂Bbpz)₂] and Cu(HBtpz)₂ while the reaction with oxalate ion, C₂O ₄ ^2– yields a stable neutral solid compound, [Cu(HCtpz)(C₂O₄)].     

Kinetic study of the reaction betweentrans-tetracyanodioxomolybdate(IV) and fluoride ions

Summary The kinetics of the reaction between [MoO₂(CN)₄]^4– and F^– have been studied in the pH range 8 to 11. The results indicated that the diprotonated form, [MoO(OH₂)(CN)₄]^2–, is the only reactive species and that the aqua-ligand is substituted by the F^– ion according to the following reaction. The k₁ and k_–1 values are 8.8(2) M^–1 s^–1 and 0.6(1)s^–1, respectively, at 15°C. A dissociative substitution process is proposed.     

Copper(II) complexes of isobutyl methyl ketone semicarbazone

Summary Copper(II) complexes of isobutyl methyl ketone semicarbazone have been prepared and characterised by magnetic moments, i.r., electronic and e.s.r. spectral studies. The complexes were found to have CuL₂X₂ and CuL₂X₂ · 2H₂O compositions. The electronic and e.s.r. spectra suggest a five-coordinated trigonal bipyramidal geometry, for the CuL₂X₂ complexes, (X=Cl^–, Br^–, NO ₃ ^– , and 1/2 SO ₄ ^2– ) and six-coordinate octahedral geometry has been suggested for CuL₂X₂ · 2H₂O (X=Cl^–, Br^–, NO ₃ ^– , SO ₄ ^2– ).     

Coordination chemistry of poly(1-pyrazolyl)alkanes Part V: Preparation and characterization of cobalt(II) complexes with bis(1-pyrazolyl)methane and bis(3-methylpyrazolyl)propane

Summary Bis(1-pyrazolyl)methane, H₂Cbpz, and bis(3-methylpyrazolyl)propane, Me₂Cbmpz, react with cobalt(II) salts to give the solid complexes: [Co(H₂Cbpz)₂X₂] ·2H₂O (X=Cl^–, Br^–, I^–, NO ₃ ^– or ClO ₄ ^– ) and [Co(Me₂-Cbmpz)X₂] (X=Cl^–, Br^–, or I^–), which were isolated and characterised by elemental analysis, i.r. and electronic spectra and conductance measurements. From spectral data, octahedral and tetrahedral structures have been proposed for the H₂Cbpz and Me₂Cbmpz complexes respectively. The molar conductance of the complexes indicates that they are non-ionic.     

Kinetics and mechanism of pentacyanohydroxoferrate(III) formation from the reaction of cyanide ion with [Fe2L(OH)2]2− (L=triethylenetetraaminehexaacetate)

Summary The kinetics and mechanism of the reaction between [Fe₂L(OH)₂]^2– and cyanide ion (L = TTHA, triethylenetetraaminehexaacetate) have been studied spectrophotometrically atpH=11.0±0.1,I=0.1 M(NaClO₄) and T = 25±0.1 °C. The overall reaction consists of three distinct, observable stages. The first stage involves the dissociation of the binuclear complex into a mononuclear complex [FeL(OH)]^4– which then reacts with cyanide to form [Fe(CN)₅OH]^3–. The species [Fe(CN)₅OH]^3– reacts further with an excess of cyanide and forms [Fe(CN)₆]^3– in the second stage of reaction. The last stage involves the reduction of [Fe(CN)₆]^3– formed in the second stage by the TTHA^6– released in the first stage of reaction. The formation of [Fe(CN)₅OH]^3– in the first stage is firstorder in [Fe₂L(OH)₂]^2– and third-order in cyanide over a large range of cyanide concentrations but becomes zero-order in cyanide at [CN^–] < 4×10^–2M.These observations enable us to suggest the presence of a slow step in which [Fe₂L(OH)₂]^2– dissociates into [FeL(OH)]^4– and [FeOH]²⁺ at low cyanide concentrations and a cyanide assisted rapid dissociation of [Fe₂L(OH)₂]^2– to [FeL(OH)(CN)]^5– at higher cyanide concentrations. The species [FeL(OH)(CN)]^5– reacts further with an excess of cyanide to produce [Fe(CN)₅OH]^3– finally.The reverse reaction between [Fe(CN)₅OH]^3– and TTHA^6– follows first-order dependence in each of [Fe(CN)₅OH]^3– and TTHA^6– and inverse first-order dependence on cyanide concentration. A six-step mechanism has been proposed for the first stage of reaction in which the fifth has been identified as the rate-determining step.     

Synthesis,characterisation and solid state thermal behaviour of nickel(II) diamine complexes

Summary [NiL₂X₂] (L =N,N-dimethyl-1,2-ethanediamine; X = Cl^–, CF₃CO ₂ ^– , CC1₃CO ₂ ^– and CBr₃CO ₂ ^– ), [NiL₂C₂O₄] · H₂O and [NiL₂X₂] · 2 H₂O (X = Br^–, 0.5 SO ₄ ^2– and 0.5 SeO ₄ ^– ) have been synthesised and their thermal studies carried out. Thermally induced phase transition phenomena are noticed in [NiL₂X₂] (X = CF₃CO ₂ ^– and CCl₃CO ₂ ^– ) and their probable mechanisms are described. [NiL₂X₂] (X = Br^–, 0.5 SO ₄ ^2– and 0.5 SeO ₄ ^2– ) and [NiLX₂] (X = Cl^–, 0.5 C₂O ₄ ^2– and 0.5 SO ₄ ^2– ) have been prepared by solid state pyrolysis from the respective parent diamine complexes. [NiL₂X₂] have been made in solid state by temperature arrest technique from [NiL₂(CX₃CO₂)₂] (X = Cl^– and Br^–).     

Co-hydrolysis products of tetraethoxysilane and methyltriethoxysilane in the presence of tetramethylammonium ions: Part 2 [1]

²⁹Si NMR peaks due to species with the double four-membered ring siloxane backbone composed of both Si(O^–)_4/2 and CH₃Si(O^–)_3/2 units, (CH₃) _n Si₈O _{20 – n} ^{/(8 – n) –} (n=1–3), formed by co-hydrolysis of tetraethoxysilane and methyltriethoxysilane in the presence of tetramethylammonium ions in methanol have been assigned. It has been found that ²⁹Si NMR peaks due to Si(OSi)₃(O^–) units shift to lower frequencies by replacement of the adjacent Si(O^–)_4/2 units by CH₃Si(O^–)_3/2 units, in other words, with increasing m value in Si[OSi(O^–)₃]_{3 – m} [OSi(CH₃) (O^–)₂] _m (O^–) (m=0–2). Peaks from CH₃ Si(OSi)₃ units in the species have also appeared as separated due to the kind of neighbor structural units. On the basis of the assignments, positions of CH₃Si(O^–)_3/2 units in the cubic octameric siloxane framework of (CH₃) _n Si₈O _{20 – n} ^{/(8 – n) –} (n=2, 3), for both of which three isomers are present, have been estimated.     

A field-desorption study of thermal stability in potassium pentacyanocobaltates(III)

Field desorption has been applied to research the thermal stability of the compounds K_n[Co(CN)₅X], where X=SO₃ ^2–, CN^–, NO₂ ^–, NO^–, Cl^–, Br^–, I^–, and H₂O. A likely mechanism is proposed for the thermal decomposition. There is a correlation between the tetragonal-distortion parameters and the temperature of onset of destruction for the [Co(CN)₅X]^n– anion.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 21, No. 1, pp. 111–115, January–February, 1985.     

1, 2-Dithiolium salts

A new method for the synthesis of 1, 2-dithiolium hydrogen sulfates by the oxidation of 1, 2-dithiole-3-thiones with hydrogen peroxide in acetic acid has been developed. From 4-(p-tolyl) 1, 2-dithiolium hydrogen sulfate a series of salts containing anions of inorganic, heteroorganic, and organic acids (Cl^–, Br^–, I^–, ClO ₄ ^– , CNS^–, VO ₃ ^– , HMoOO ₄ ^– , S₂O ₃ ^2– , S₂O ₈ ^2– , Cr₂O ₇ ^2– , Fe(CN) ₆ ^3– , Fe(CN) ₆ ^4– , B(C₆H₅) ₄ ^– , F₃CCOO^–, C₆H₂(NO₂)₃O^–) has been obtained. 4-(p-tolyl)-1, 2-dithiolium salts containing the anions NO ₂ ^– , NO ₃ ^– , ClO ₃ ^– , BrO ₃ ^– , SO ₃ ^2– , SO ₄ ^2– , S₂O ₅ ^2– and Cl₃CCOO^– dissolve in water and do not precipitate in double decomposition reactions. The reactions of 4-(p-tolyl)-1, 2-dithiolium hydrogen sulfate with sodium sulfite, disulfide, and hydrogen sulfide lead to the formation of bis[4-(p-tolyl)-1, 2-dithiol-3-yl] sulfide and disulfide and the sodium salt of 4-(p-tolyl-1, 2-dithiole-3-thiol, respectively. The reaction of 4-(p-tolyl)-1, 2-dithiolium hydrogen sulfate with solutions of salts of the alkali metals containing the anions of weak acids F^–, CNO^–, HCO ₃ ^– , CO ₃ ^2– , B₄O ₇ ^2– , HAsO ₄ ^2– , PO ₄ ^3– , CH₃COO^–, ClCH₂COO^–, etc.) forms bis[4-(p-tolyl)-1, 2-dithlol-3-yl] oxide. [8, Table 3].For part I, see [1].     

Oxidation of palladium(II) by hexacyanoferrate(III) in aqueous ethanoic acid: a mechanistic study

The oxidation of Pd^II by Fe(CN) ₆ ^3– has been studied in 55% MeCO₂H–H₂O containing 4.0 mol dm^–3 HCl, the oxidation being made possible by altering redox potentials. The active species of Pd^II and Fe(CN) ₆ ^3– are PdCl ₃ ^– and H₂Fe(CN) ₆ ^– , respectively. A possible mechanism is proposed and verified, and the reaction constants involved have been evaluated.     

Rapid determination of telmisartan in pharmaceuticals and serum by the parallel catalytic hydrogen wave method

The polarographic characteristics of telmisartan have been investigated in 0.8 mol L^–1 NH₃.H₂O–NH₄Cl (pH 8.9)–0.01 mol L^–1 H₂O₂ as supporting electrolyte. The results demonstrate that the polarographic reduction wave at ca. –1.30 V in the absence of H₂O₂ is a catalytic hydrogen wave, and the reduction wave enhanced by H₂O₂ is a so-called parallel catalytic hydrogen wave. The analytical sensitivity of the parallel catalytic hydrogen wave is ca. 60 times higher than that of the corresponding catalytic hydrogen wave. Based on the parallel catalytic hydrogen wave a novel method has been developed for determination of telmisartan by linear sweep polarography. The calibration curve is linear in the range 2.0×10^–8–2.0×10^–6 mol L^–1 and the detection limit is 1.0×10^–8 mol L^–1. The precision is excellent with relative standard deviations of 2.6% at a concentration of 1.0×10^–7 mol L^–1 telmisartan. The proposed method has been applied to the direct determination of the telmisartan in capsule forms and biological samples. The proposed method has been proved to be advantageous over existing CZE and MEKC methods in simplicity, rapidity, and reproducibility.     

Photoreduction of rhenium(VII) in hydrochloric and sulfuric acids and their mixtures

Pulse photolysis has been used to investigate the photochemical reactions that take place in the series of oxochloride complexes of Re(VII), Re(VI), and Re(V) in concentrated hydrochloric and sulfuric acids and their mixtures. The kinetics of the formation and decay of the short-lived complex ReOCl ₅ ^– have been studied as a function, of the composition of the medium (the concentration of the acids and water). The causes of the stabilization of ReOC ₅ ^– in concentrated H₂SO₄ have been elucidated. It has been found that the anion radical Cl ₂ ^– formed in the photolysis of HCl oxidizes the complex ReOCl ₅ ^2– to ReOCl ₅ ^– .Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 22, No. 3, pp. 296–302, May–June, 1986.     

Relative efficiencies of substituted aromatic monocarboxylic acids as eluents in ion chromatographic separation of inorganic and organic anions

The eluent strengths of para, ortho and meta substituted hydroxy-, nitro-, amino- and sulfobenzoic acids in single column ion chromatographic separations of inorganic and organic anions have been evaluated and compared with benzoic acid.o-Sulfobenzoic acid turns out to be a stronger and efficient eluent compared to others for the separation and determination of monovalent (Cl^–, NO ₂ ^– , Br^–, NO ₃ ^– ) and divalent (SO ₄ ^2– , SeO ₄ ^2– , S₂O ₃ ^2– , S₂O ₆ ^2– ) inorganic anions. In addition it also functions as an appropriate mobile phase for the detection and quantification of some substituted benzoate ions in an aqueous medium.     

On the characteristics and mechanism of the radiation-induced chain reaction between sulfur dioxide and molecular oxygen in acid solutions

Characteristics of the -induced chain reaction between sulfur dioxide and molecular oxygen in perchloric and sulfuric acid media in the presence of Ce(III) ions have been studied. The concentration effects of dissolved oxygen (0.2·10^–3–9.4·10^–3 mol/dm³, sulfur dioxide (0.3·10^–1–2.0·10^–1 mol/dm³ and Ce(III) (0.2·10^–3–4.8·10^–3 mol/dm³) and dose rate (0.26·10¹⁹–1.0·10¹⁹ eV/dm³·s) on the radiation — chemical yield of oxygen consumption G(–O₂) and accumulation of sulfate G(HSO ₄ ^– ), have been investigated. The reaction proceeds with G(–O₂) reaching 10²–10³ molecule/100eV in a catalytic regime. The reaction rate in perchloric acid medium is 3–4 times lower than that in the sulfuric acid medium and depends on the SO₂, O₂ and Ce(III) concentrations, the reaction order varying from 1.0 to 0 and/or in the reverse direction. The mechanism of the process involves chain propagation with 3 stages and 3 intermediates: SO₃H, HSO₅ and Ce(IV). The catalytic effect is caused by the interaction of HSO₄ with Ce(IV) ions followed by their reduction when interacting with SO₂, yielding SO₃H radicals. Chain termination may be due to one or two of the three intermediates or due to all three particles, the kinetics depending on this. Kinetic equations describing the experimental data have been obtained.     

Water in melts: Raman spectral investigation of the molten Ca(NO3)2·4H2O−KNO3 system

The Raman spectra of molten mixtures of Ca(NO₃)₂\4H₂O–KNO₃ have been examined, covering the concentration range of 0–70 mole% KNO₃. The frequencies in the spectra of the mixtures have been found to change slightly with concentration. Striking variations in the band shapes have been observed in the regions corresponding to the O–H stretching mode (2850–3850 cm^–1) and the v₄-NO ₃ ^– mode (700–750 cm^–). The results are discussed in terms of perturbed quasi-lattice structure for the melt, in which there could be a displacement of water molecules in the first coordination sphere around Ca²⁺ by the NO ₃ ^– ion.     

Voltamperometric determination of uranium and plutonium in alkaline solutions

The simultaneous determination of U(VI), Pu(VI), Pu(V) in 0.5–4.0 M NaOH has been elaborated by means of classical and differential pulse voltamperometry. U(VI) is determined with a dropping mercury electrode (DME) at the half-wave potential of E_1/2=–0.89 V vs. Ag/AgCl reference electrode due to reduction to U(V). The limiting current or peak heights are proportional to uranium(VI) concentration in the range of 1.3.10^–7–3·10^–4 M U(VI). Deviation from proportionality is observed for higher concentrations due to polymerization of uranates. Pu(VI) and Pu(V) are determined with a platinum rotating electrode at E_1/2=–0.02 V due to the reaction Pu(VI)+e^–»Pu(V) and with DME at E_1/2=–1.1 V due to the reduction to Pu(III). The limiting currents of both Pu(VI) and Pu(V) are proportional to their concentrations in the range of 4·10^–6–1.2·10^–3 M Pu. The determination of U(VI), Pu(VI), Pu(V) is not interfered by the presence of the following salts: 2M NaNO₃, 2M NaNO₂, 1.5M NaAlO₂, 0.5M NaF and ions of Mo(VI), W(VI), V(V), Cu(II). The presence of CrO ₄ ^2– and FeO ₂ ^– ions disturbs the determination of U(VI) in 1–4M NaOH, however, contribution of the reaction Fe(III)+e^–»Fe(II) to uranium reduction peak can be calculated from the height of the second peak Fe(II)+2 e^–»Fe(0).     

Kinetics and mechanism of pentacyanohydroxoferrate(III) formation from [FeL(OH)2]− complex, (L=N-(2-hydroxyethyl) iminodiacetate anion

Summary The kinetics and mechanism of the system [FeHIDA-(OH)₂]^–+5CN^–[Fe(CN)₅OH^–+HIDA^2–+OH^– (HIDA=N-(2-hydroxyethyl) (iminodiacetate) at pH=9.5±0.02, I=0.1 M and at 25±0.1°C have been studied spectrophotometrically at 395 nm ( _max of [Fe(CN)₅OH]^3–]. The reaction has three distinguishable stages; the first is formation of [Fe(CN)₅OH]^3–, the second is conversion of [Fe(CN)₅OH]^3– into [Fe(CN)₆]^3–, and last is the reduction of [Fe(CN)₆]^3– to [Fe(CN)₆]^4– by the HIDA^2– released in the first stage. The first stage shows variable-order dependence on cyanide concentration, unity at high cyanide concentration and zero at low cyanide concentration. The second stage exhibits first-order dependence on the concentration of [Fe(CN)₅OH]^3– as well as on cyanide. The reverse reaction between [Fe(CN)₅OH]^3– and HIDA^2– is first-order in each of these species and inverse first-order in cyanide. On the basis of forward and reverse rate studies, a five-step mechanism has been proposed for the first stage. The first step involves a slow loss of one OH^–, by a cyanide-independent path.