The unoccupied electronic structure characterization of hydrothermally grown ThO2 single crystals

Single crystals of thorium dioxide ThO₂, grown by the hydrothermal growth technique, have been investigated by ultraviolet photoemission spectroscopy (UPS), inverse photoemission spectroscopy (IPES), and L₃, M₃, M₄, and M₅ X‐ray absorption near edge spectroscopy (XANES). The experimental band gap for large single crystals has been determined to be 6 eV to 7 eV, from UPS and IPES, in line with expectations. The combined UPS and IPES, place the Fermi level near the conduction band minimum, making these crystals n‐type, with extensive band tailing, suggesting an optical gap in the region of 4.8 eV for excitations from occupied to unoccupied edge states. Hybridization between the Th 6d/5f bands with O 2p is strongly implicated. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The work function of hydrothermally synthesized UO2 and the implications for semiconductor device fabrication

The photoelectric work function of nearly stoichiometric (111) and (100) hydrothermally grown UO₂ was measured to be 6.28 ± 0.36 eV and 5.80 ± 0.36 eV, respectively. Candidate metals for electrical contacts are identified for both rectifying and non‐rectifying contacts based on work function, lattice compatibility, and electrical conductivity.     

Extended X‐ray absorption fine structure and multiple‐scattering simulation of nickel dithiolene complexes Ni[S2C2(CF3)2]2n (n = −2, −1, 0) and an olefin adduct Ni[S2C2(CF3)2]2(1‐hexene)

A series of Ni dithiolene complexes Ni[S₂C₂(CF₃)]₂ⁿ (n = ?2, ?1, 0) ( 1 , 2 , 3 ) and a 1‐hexene adduct Ni[S₂C₂(CF₃)₂]₂(C₆H₁₂) ( 4 ) have been examined by Ni K‐edge X‐ray absorption near‐edge structure (XANES) and extended X‐ray absorption fine‐structure (EXAFS) spectroscopies. Ni XANES for 1 – 3 reveals clear pre‐edge features and approximately +0.7 eV shift in the Ni K‐edge position for `one‐electron' oxidation. EXAFS simulation shows that the Ni—S bond distances for 1 , 2 and 3 (2.11–2.16 Å) are within the typical values for square planar complexes and decrease by ～0.022 Å for each `one‐electron' oxidation. The changes in Ni K‐edge energy positions and Ni—S distances are consistent with the `non‐innocent' character of the dithiolene ligand. The Ni—C interactions at ～3.0 Å are analyzed and the multiple‐scattering parameters are also determined, leading to a better simulation for the overall EXAFS spectra. The 1‐hexene adduct 4 presents no pre‐edge feature, and its Ni K‐edge position shifts by ?0.8 eV in comparison with its starting dithiolene complex 3 . Consistently, EXAFS also showed that the Ni—S distances in 4 elongate by ～0.046 Å in comparison with 3 . The evidence confirms that the neutral complex is `reduced' upon addition of olefin, presumably by olefin donating the π‐electron density to the LUMO of 3 as suggested by UV/visible spectroscopy in the literature.     

Application of glancing‐emergent‐angle fluorescence for polarized XAFS studies of single crystals

X‐ray absorption fine‐structure (XAFS) data were obtained for the V K‐edge for a series of anisotropic single crystals of (Cr_xV_1–x)₂O₃. The data and the results were compared for the as‐prepared bulk single crystals (measured in fluorescence in two different orientations) and those ground to powder (measured in transmission). For the bulk single crystals, the glancing‐emergent‐angle (GEA) method was used to minimize fluorescence distortion. The reliability of the GEA technique was tested by comparing the polarization‐weighted single‐crystal XAFS data with the experimental powder data. These data were found to be in excellent agreement throughout the entire energy range. Thus, it was possible to reliably measure individual V–V contributions parallel and perpendicular to the c axis of the single crystals, i.e. those unavailable by powder data XAFS analysis. These experiments demonstrate that GEA is a premiere method for non‐destructive high‐photon‐count in situ studies of local structure in bulk single crystals.     

The competitive growth of cubic domains in Ti1–xAlxN films studied by diffraction anomalous near‐edge structure spectroscopy

Titanium and aluminium nitride films deposited by magnetron sputtering generally grow as columnar domains made of oriented nanocrystallites with cubic or hexagonal symmetry depending on Al content, which are embedded in more disordered grain boundaries. The substitution of Al atoms for Ti in the cubic lattice of the films improves their resistance to wear and oxidation, allowing their use as protective coatings. Ti K‐edge X‐ray absorption spectroscopy, which probes both crystallized and more disordered grain boundaries, and X‐ray diffraction anomalous fine structure, which is sensitive to short‐ and long‐range order within a given crystallized domain, are carried out on a set of Ti_1–xAl_xN films deposited by magnetron sputtering on Si substrates. Attention is paid to the shape of the pre‐edge region, which is sensitive to the symmetry of the site occupied by Ti atoms, either octahedral in face‐centred‐cubic Ti‐rich (TiN, Ti_0.54Al_0.46N) samples or tetrahedral in hexagonal‐close‐packed Al‐rich (Ti_0.32Al_0.68N) films. In order to obain information on the titanium environment in the well crystallized areas, subtraction of the smooth part of the energy‐dependent structure factor for the Bragg reflections is applied to the pre‐edge region of the diffraction anomalous data in order to restore their spectroscopic appearance. A flat pre‐edge is related to the typical octahedral environment of Ti atoms for cubic reflections. The difference observed between pre‐edge spectra associated with face‐centred‐cubic 200 and 111 Bragg reflections of Ti_0.54Al_0.46N is assigned to Ti enrichment of 111 large well ordered domains compared with the more disordered 200 ones. The sharp peak observed in the spectrum recorded from the hexagonal 002 peak of Ti_0.32Al_0.68N can be regarded as a standard for the pure tetrahedral Ti environment in hexagonal‐close‐packed nitride.     

Nanoparticles: Implication of Ligand Choice on Surface Properties,Crystal Structure,and Magnetic Properties of Iron Nanoparticles (Part. Part. Syst. Charact. 3/2013)

The behavior of iron nanoparticles is heavily influenced by their highly reactive surfaces. A better understanding of organic ligand/particle interactions must be achieved in order to synthesize iron nanoparticles with magnetic saturations (σ _sat) equivalent to bulk iron. Even when synthesized using careful, air‐free chemistry techniques and ligands more weakly interacting than those often reported in the literature, the magnetic saturation of iron nanoparticles generally only approaches, but not equals, the magnetic saturation of bulk iron. Here, iron nanoparticles are synthesized using Schlenk line chemistry methods and two different weakly interacting ligands: 2,4‐pentanedione and hexaethylene glycol monododecylether. These particles have saturation magnetizations slightly lower than bulk iron, which is believed to be caused by interactions between the passivating ligands and the surface of the nanoparticles. Using X‐ray absorption fine structure studies, it is shown that oxidized species of iron exist at the nanoparticles’ surface and can be attributed to iron/ligand interaction. The percentage of oxidized species scales with the surface to volume ratio of the nanoparticles, and therefore appears limited to the nanoparticle surface. X‐ray absorption fine structure analysis also shows that the nanoparticles have an expanded crystalline lattice, which can further impact their magnetic properties.     

Structural evolution of self‐assisted GaAs nanowires grown on Si(111)

GaAs nanowires are grown on Si(111) by self‐assisted molecular beam epitaxy, and the ratio between wurtzite and zinc‐blende phases is determined as function of nanowire length using asymmetric X‐ray diffraction. We show that under the applied growth conditions, nanowires grow in both phases during the initial stage of growth, whereas the zinc‐blende content increases with growth time and dominates in long nanowires. Compared to the zinc‐blende units, the vertical lattice parameter of the wurtzite segments is 0.7% larger, as measured by the positions of respective diffraction peaks. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Measurement of the X‐ray mass attenuation coefficients of silver in the 5–20 keV range

The X‐ray mass attenuation coefficients of silver were measured in the energy range 5–20 keV with an accuracy of 0.01–0.2% on a relative scale down to 5.3 keV, and of 0.09–1.22% on an absolute scale to 5.0 keV. This analysis confirms that with careful choice of foil thickness and careful correction for systematics, especially including harmonic contents at lower energies, the X‐ray attenuation of high‐Z elements can be measured with high accuracy even at low X‐ray energies (<6 keV). This is the first high‐accuracy measurement of X‐ray mass attenuation coefficients of silver in the low energy range, indicating the possibility of obtaining high‐accuracy X‐ray absorption fine structure down to the L₁ edge (3.8 keV) of silver. Comparison of results reported here with an earlier data set optimized for higher energies confirms accuracy to within one standard error of each data set collected and analysed using the principles of the X‐ray extended‐range technique (XERT). Comparison with theory shows a slow divergence towards lower energies in this region away from absorption edges. The methodology developed can be used for the XAFS analysis of compounds and solutions to investigate structural features, bonding and coordination chemistry.     

Tris‐amidoximate uranyl complexes via η2 binding mode coordinated in aqueous solution shown by X‐ray absorption spectroscopy and density functional theory methods

The present study sheds some light on the long‐standing debate concerning the coordination properties between uranyl ions and the amidoxime ligand, which is a key ingredient for achieving efficient extraction of uranium. Using X‐ray absorption fine structure combined with theoretical simulation methods, the binding mode and bonding nature of a uranyl–amidoxime complex in aqueous solution were determined for the first time. The results show that in a highly concentrated amidoxime solution the preferred binding mode between UO₂²⁺ and the amidoxime ligand is η² coordination with tris‐amidoximate species. In such a uranyl–amidoximate complex with η² binding motif, strong covalent interaction and orbital hybridization between U 5f/6d and (N, O) 2p should be responsible for the excellent binding ability of the amidoximate ligand to uranyl. The study was performed directly in aqueous solution to avoid the possible binding mode differences caused by crystallization of a single‐crystal sample. This work also is an example of the simultaneous study of local structure and electronic structure in solution systems using combined diagnostic tools.     

In‐situ X‐ray diffraction study of an electric field induced phase transition and giant strain in Na0.5Bi0.5TiO3–x %BaTiO3 lead‐free single crystals

A giant electric field (E) induced strain of ε = 0.60% has been observed for Na_0.5Bi_0.5TiO₃–5.6%BaTiO₃ single crystals under E = 20 kV/cm at 130 °C. In‐situ X‐ray diffraction (XRD) revealed that this induced transition was between pseudocubic and tetragonal structures. Our work provides a potential alternative to lead‐based piezoelectric materials. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Semipolar (11\bar 2\bar 2) ZnO thin films grown on LaAlO3‐buffered LSAT (112) single crystals by pulsed laser deposition

Semipolar (11\bar 2 \bar 2) ZnO was successfully grown on (112) LaAlO₃/(LaAlO₃)_0.29(Sr₂AlTaO₆)_0.35 substrate by pulsed laser deposition. The epitaxial relationship is [11\bar 23]_{\rm ZnO} // [11\bar 1]_{\rm LAO/LSAT} with the polar axis of [000\bar 1]_{\rm ZnO} pointing to the surface. For ZnO films with thickness of 1.6 μm, the threading dislocation density is ～1 × 10⁹ cm^–2, and the density of basal stacking faults is below 1 × 10⁴ cm^–1. The (11\bar 2 \bar 2) ZnO exhibits strong D⁰X emissions with a FWHM of 9 meV and very few green–yellow emissions in the low‐temperature (10 K) and room‐temperature photoluminescence spectra, respectively.

     

Direct growth of graphene film on piezoelectric La3Ga5.5Ta0.5O14 crystal

For the first time, a few layer graphene was grown on the surface of the polar X ‐cut (110) of a piezoelectric La₃Ga_5.5Ta_0.5O₁₄ crystal by the CVD method. This polar X ‐cut is characterized by a good matching of the crystal lattice parameters of La₃Ga_5.5Ta_0.5O₁₄ and two‐dimensional graphene crystal, as well as the presence of piezoelectric fields on the surface of the substrate, which could affect the graphene growth process. Raman spectroscopy investigation has shown the ability for direct growth of graphene on the piezoelectric crystal. The NEXAFS spectroscopy studies of the film grown on the surface of the X ‐cut of an La₃Ga5_.5Ta_0.5O₁₄ crystal also confirmed that the grown film is graphene. Moreover, the NEXAFS spectra enable the conclusion that additional electron states are formed as a result of chemical bonding between the atoms of graphene and the substrate which proceeds through hybridization of the valence electron states of the substrate and graphene atoms. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Temperature dependence of anisotropic displacement parameters in O3‐type NaM O2 (M = Cr and Fe): Comparison with isostructural LiCoO2

O3‐type NaM O₂ (M = Cr and Fe) is a promising cathode material for sodium ion secondary batteries (SIBs). Here, we investigate the temperature dependence of anisotropic displacement parameters, U₃₃ and U₁₁, in NaM O₂ by synchrotron radiation X‐ray powder diffraction measurements. In both compounds, the displacement ratios $(r \equiv \sqrt {U_{33} /U_{11} } - 1)$ for M and O are positive, reflecting the out‐of‐plane thermal displacement of the M O₂ layer. On the other hand, the r value for Na is negative, reflecting the two‐dimensional (2D) host structure. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Improvement of the scintillation properties of Gd3Ga3Al2O12:Ce,B single crystals having tailored defect structure

A novel approach is reported to minimize various defect centers in Ce doped Gd₃Ga₃Al₂O₁₂ single crystals to improve the scintillation properties. The crystals of Gd₃Ga₃Al₂O₁₂ codoped with 0.2 at% Ce and B (GGAG:Ce,B) have been grown in air and argon ambient using the Czochralski technique. The scintillation light output of crystals grown in Ar ambient was significantly increased after annealing the crystals in air. The measured light output of 60000 ph/MeV for annealed crystals is the highest value reported among this class of materials. As a consequence, the energy resolution at 662 keV gamma‐rays from a ¹³⁷Cs source was improved from 8% for the crystals grown in air to 6% for crystals grown in Ar and subsequently annealed in air. Further, the thermal quenching energy of photoluminescence (PL) emission was increased to be 470 meV for the annealed crystals. The thermoluminescence (TL) measurements suggest that the crystals grown in Ar ambient and post‐growth annealed in air may have a lesser concentration of trap centers which subsequently lead to the improvement in optical and scintillation properties leading to a superior detector performance. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Vibrational spectra and crystal structure of the di‐amino acid peptide cyclo(L‐Met‐L‐Met): comparison of experimental data and DFT calculations

Experimental Raman and FT‐IR spectra of solid‐state non‐deuterated and N‐deuterated samples of cyclo(L ‐Met‐L ‐Met) are reported and discussed. The Raman and FT‐IR results show characteristic amide I vibrations (Raman: 1649 cm⁻¹, infrared: 1675 cm⁻¹) for molecules exhibiting a cis amide conformation. A Raman band, assigned to the cis amide II vibrational mode, is observed at ∼1493 cm⁻¹ but no IR band is observed in this region. Cyclo(L ‐Met‐L ‐Met) crystallises in the triclinic space group P1 with one molecule per unit cell. The overall shape of the diketopiperazine (DKP) ring displays a (slightly distorted) boat conformation. The crystal packing employs two strong hydrogen bonds, which traverse the entire crystal via translational repeats. B3‐LYP/cc‐pVDZ calculations of the structure of the molecule predict a boat conformation for the DKP ring, in agreement with the experimentally determined X‐ray structure. Copyright © 2009 John Wiley & Sons, Ltd.     

高温高压制备Cr2+: ZnSe单晶及其光学性质

为了得到高质量、大尺寸Cr²⁺: ZnSe中红外激光晶体,以适应高功率全固态中红外激光器的发展要求,在高温高压下全石墨腔内运用布里奇曼晶体生长方法,生长出了高质量Ф 30×120 mm Cr²⁺: ZnSe单晶。采用X射线粉末衍射(XRD)、透射电镜(TEM)、红外稳态吸收及荧光光谱等测试方法对晶体的结构及光谱特性进行了表征,并探讨了Cr²⁺: ZnSe晶体中Cr²⁺的能级结构及跃迁机理。结果表明:所生长的Cr²⁺: ZnSe单晶结构均匀,性质稳定,1.97 μm激发的荧光光谱覆盖1.9~3 μm范围,可用于获得2~3 μm全固态中红外激光。     

A theoretical study of the oxygen K-edge near-edge X-ray absorption ne structure of N2O/Ir(110)

A multiple-scattering cluster method is employed to calculate the oxygen K-edge near-edge X-ray absorption fine structure of N₂O/Ir(110) and its monolayer. Two peaks and one weak resonance appear in both cases. The selfconsistent field DV-X calculations of the peaks and resonance show that the physical origin of the pre-edge peak x is different from those of the main peak 1 and the other weak resonance σ₁. This setup is intrinsic to the N₂O monolayer, owing to the interaction between the neighbouring molecular chains in the monolayer and partly to the adsorbed atomic oxygen, according to both the theoretical and experimental data.     

Na‐site energy of P2‐type NaxM O2 (M = Mn and Co)

P2‐type Na_xM O₂ (M = Mn and Co) is a promising cathode material for low‐cost sodium ion secondary batteries. In this structure, there are two different crystallographic Nai (i = 1 and 2) sites with different Coulomb potential $ (\varphi _i)$ provided by M^4–x and O^2–. Here, we experimentally determine a difference ${(\rm \Delta }\varepsilon \equiv \varepsilon _1 - \varepsilon _2)$ of Na‐site energies ${(}\varepsilon _i \equiv e\varphi {\kern 1pt} _i)$ based on the temperature dependence of the site occupancies. We find that ${\rm \Delta }\varepsilon \;{=}\;56\;{K}$ for Na_0.52MnO₂ is significantly smaller than 190 K for Na_0.59CoO₂. We interpret the suppressed ${\rm \Delta }\varepsilon $ in Na_0.52MnO₂ in terms of the screening effect of the Na⁺ charge. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A reaction cell for time‐resolved in situ XAS studies during wet chemical synthesis: the Cu2(OH)3Cl case

The use of in situ time‐resolved dispersive X‐ray absorption spectroscopy (DXAS) to monitor the formation of Cu₂(OH)₃Cl particles in an aqueous solution is reported. The measurements were performed using a dedicated reaction cell, which enabled the evolution of the Cu K‐edge X‐ray absorption near‐edge spectroscopy to be followed during mild chemical synthesis. The formed Cu₂(OH)₃Cl particles were also characterized by synchrotron‐radiation‐excited X‐ray photoelectron spectroscopy, X‐ray diffraction and scanning electron microscopy. The influence of polyvinylpyrrolidone (PVP) on the electronic and structural properties of the formed particles was investigated. The results indicate clearly the formation of Cu₂(OH)₃Cl, with or without the use of PVP, which presents very similar crystalline structures in the long‐range order. However, depending on the reaction, dramatic differences were observed by in situ DXAS in the vicinities of the Cu atoms.