The application of a new approach based on organic homo‐rank compounds and homologous compounds to the structure–property relationship study of mono‐substituted alkanes

The two conceptual systems of organic homologous compounds and homo‐rank compounds give insight into the influence of structures on the properties of mono‐substituted alkanes X_i–(CH₂)_j–H from the transverse (change of repeating unit number j of CH₂) and longitudinal (change of functional group X_i) perspectives, respectively. This paper aims to combine the organic homo‐rank compounds approach together with the homologous compounds approach to explore the property change rules of mono‐substituted alkanes involving various substituents. Firstly, based on the concept of organic homologous compounds, the properties of mono‐substituted straight‐chain alkane homologues were linearly correlated to the two‐thirds power of the number of carbon atoms (N^2/3) in alkyl, and regression equations such as Q = A + BN^2/3 were obtained. The regression coefficients A and B vary with different substituents X_i, so coefficients A and B were employed to characterize the structural information of substituent X_i. The structural features of alkyls (–(CH₂)_j–H, that is, –C_jH_2j+1) were described by the polarizability effect index (PEI_(R)) and vertex degree–distance index (VDI). Then based on four parameters A, B, PEI_(R), and VDI, quantitative structure–property relationship models were built for the boiling points (Bp) and refractive indexes (n_D) of each mono‐substituted alkane homo‐rank series, where j = 3–10 and the substituents X_i involve F, Cl, Br, I, NO₂, CN, NH₂, COOH, CHO, OH, SH, and NC. Good results indicate that the combination of an organic homo‐rank compounds method and a homologous compounds method has exhibited obvious advantages over traditional methods in the quantitative structure–property relationship study of mono‐substituted alkanes concerning various substituents. Copyright © 2015 John Wiley & Sons, Ltd.     

One‐scale basicities of diaminobenzenes and diaminonaphthalenes: from aniline to proton sponge

Basicity constants, pK_a, for a wide range of mono‐protonated diaminobenzenes and diaminonaphthalenes, including dimethylamino derivatives were for the first time uniformly measured in 20% aqueous ethanol (29 compounds) and 80% aqueous dioxane (39 compounds) spanning from aniline to 1,8‐bis(dimethylamino)naphthalene (‘proton sponge’). The dioxane system proved to be more versatile and because of better solubility of N‐alkylated polyaminoarenes allowed to add to the same scale some superbasic bis(dialkylamino)‐, tetrakis(dialkylamino)‐, and hexakis(dialkylamino)naphthalenes, thus extending the scale for almost 10 pK_a units, revealing possible limits of basicity changes in aromatic amines. The basicity of reference bases, pyridine and triethylamine, was also measured in these solvent systems. A group of N‐alkylated compounds was found to be less basic in aqueous dioxane when compared with their NH₂‐analogs. This anomaly was not observed in aqueous ethanol. Other basicity trends and correlations between different basicity scales were also discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

Solid‐phase cadmium speciation in soil using L3‐edge XANES spectroscopy with partial least‐squares regression

Cadmium (Cd) has a high toxicity and resolving its speciation in soil is challenging but essential for estimating the environmental risk. In this study partial least‐square (PLS) regression was tested for its capability to deconvolute Cd L₃‐edge X‐ray absorption near‐edge structure (XANES) spectra of multi‐compound mixtures. For this, a library of Cd reference compound spectra and a spectrum of a soil sample were acquired. A good coefficient of determination (R²) of Cd compounds in mixtures was obtained for the PLS model using binary and ternary mixtures of various Cd reference compounds proving the validity of this approach. In order to describe complex systems like soil, multi‐compound mixtures of a variety of Cd compounds must be included in the PLS model. The obtained PLS regression model was then applied to a highly Cd‐contaminated soil revealing Cd₃(PO₄)₂ (36.1%), Cd(NO₃)₂·4H₂O (24.5%), Cd(OH)₂ (21.7%), CdCO₃ (17.1%) and CdCl₂ (0.4%). These preliminary results proved that PLS regression is a promising approach for a direct determination of Cd speciation in the solid phase of a soil sample.     

Theoretical design study on multifunctional triphenyl amino‐based derivatives for OLEDs

The use of triphenyl amino‐based derivatives in organic light‐emitting diodes (OLEDs) can significantly improve their efficiency and stability and especially their electroluminescence characteristics – most of the new hole‐transport materials have this feature. In this study, a series of triphenyl amino‐based compounds were computed, including two newly designed molecules. They can function as charge transport materials and emitters with high efficiency and stability. To reveal the relationship between the properties and structures of these bifunctional and multifunctional electroluminescent materials, the ground and excited state geometries were optimized at the B3LYP/6‐31G(d), HF/6‐31G(d), TD‐B3LYP/6‐31G(d), and CIS/6‐31G(d) levels, respectively. The ionization potentials (IPs) and electron affinities (EAs) were computed. The lowest excitation energies, the maximum absorption, and emission wavelengths of these compounds were calculated by employing the time‐dependent density functional theory (TD‐DFT) method. Also, the mobilities of holes and electrons were studied computationally based on the Marcus electron transfer theory. The CH₂Cl₂ solvent effect on the absorption spectra of N,N′‐di‐1‐naphthyl‐N,N′‐diphenylbenzidine ( NPB ) was considered by polarizable continuum model (PCM). The results obtained for these compounds are in good agreement with the experimental values. These data show that the proposed compounds 1 and 2 (N,B‐di‐1‐naphthyl‐N,B‐diphenylbenzidine and Mes₂N[p‐4,4′‐biphenyl‐NPh(1‐naphthyl)]), are multifunctional and bifunctional materials similar to Mes₂B[p‐4,4′‐biphenyl‐NPh(1‐naphthyl)] ( BNPB ) and NPB , respectively. Copyright © 2009 John Wiley & Sons, Ltd.     

Cyclic voltammetry of nitrophenyl N‐glycosides on mercury electrode

Ten nitrophenyl N‐glycosides have been studied electrochemically in neutral (at pH 7) water–organic solutions by cyclic voltammetry using static mercury drop electrode. For all compounds under investigation the two electrochemical processes have been observed: the four‐electron irreversible reduction of their nitro groups to the corresponding phenylhydroxylamine derivatives, as well as the two‐electron quasi‐reversible process between phenylhydroxylamine and nitroso derivatives. For three compounds the additional electrochemical processes have been also observed, which can be connected with the formation of azoxybenzene derivatives. The potentials of both redox processes: a two‐electron quasi‐reversible R? NHOH/R? NO (E_f) and four‐electron irreversible R? NO₂/R? NHOH (E_pc(I)) systems have been determined and discussed according to crystal structures of selected compounds. E_f and E_pc(I) depended strongly on the positive mesomeric effect (caused by glycosidic nitrogen atom), as well as on the intramolecular hydrogen bond between electroactive nitro group and the hydrogen atom at the glycosidic atom observed in N‐o‐nitrophenyl‐2,3,4,6‐tetra‐O‐acetyl‐β‐D ‐glucopyranosylamine. Moreover, the chirality of selected reactants has had the pronounced effect on the E_pc(I). Copyright © 2011 John Wiley & Sons, Ltd.     

Relative stabilities and molecular structures of the isomeric enol ethers and carboxylic esters derived from α‐acetyl‐γ‐butyrolactone and α‐acetyl‐δ‐valerolactone

Recently recorded ¹⁷O NMR spectra of compounds studied in a previous work (Taskinen E. Acta Chem. Scand. 1985; B39 : 489–494) dealing with the thermodynamics of isomerization of the enol ethers of α‐acetyl‐γ‐butyrolactone reveal an error in compound identification, caused by an unexpected isomerization reaction during the synthetic procedure. Thus, acid‐catalyzed treatment of the lactone with HC(OR)₃ in the respective alcohol ROH is shown to lead initially to the desired enol ethers which, however, are gradually isomerized to a mixture of the enol ethers and an ester of 2‐methyl‐4,5‐dihydrofuran‐3‐carboxylic acid. As a result, only one of the two isomeric compounds detected in the previous equilibration study was the expected enol ether (the thermodynamically more stable E isomer) of α‐acetyl‐γ‐butyrolactone, while the other, dominating species was the respective carboxylic ester. In the present work, the evidence provided by the ¹⁷O NMR spectra is presented, and the relative stabilities of the isomeric compounds are discussed on the basis of computational enthalpy data. The treatment is also extended to the respective isomeric compounds derived from α‐acetyl‐δ‐valerolactone. Copyright © 2007 John Wiley & Sons, Ltd.     

Investigation of the substituent specific cross‐interaction effects on 13C NMR of the CN bridging group in substituted benzylidene anilines

The substituent effect on ¹³C NMR of the C?N in benzylidene anilines XPhCH?NPhY was investigated, in which the substituents X and Y are in p‐position or in m‐position of the two aromatic rings. The substituent effects including the inductive effects of X and Y, the conjugative effects of X and Y, and the substituent specific cross‐interaction effect were put into one model to quantify the ¹³C NMR chemical shift δ_C(C?N) of the C?N in XPhCH?NPhY. A penta‐parameter correlation equation with correlation coefficient 0.9975 and standard error 0.17 ppm was obtained for 80 samples of compounds. The result shows that the substituents X and Y have an opposite effect on the δ_C(C?N). The electron‐withdrawing effects of X decrease the δ_C(C?N); while the electron‐donating effects of X increase the δ_C(C?N). In contrast, the electron‐withdrawing effects of Y increase the δ_C(C?N); while the electron‐donating effects of Y decrease the δ_C(C?N). A new substituent specific cross‐interaction effect parameter Δσ² was proposed, which indicates that the most substituent specific cross‐interaction effect exists in the pair of max electron‐withdrawing group (EWG) and max electron‐donating group (EDG) or the pair of max EDG and max EWG. Further to verify the obtained correlation equation, 15 samples of model compounds were prepared and their δ_C(C?N) was measured in this work. The predicted δ_C(C?N) values with the obtained equation are in good agreement with the measured ones for these prepared compounds, which confirmed the reliability of the obtained equation. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and electrochemical study of nitrophenyl derivatives of β‐cyclodextrin

A series of nitrophenyl β‐cyclodextrin derivatives: mono[6‐deoxy‐6‐(4‐nitrobenzamido)]‐per‐ O‐methyl‐β‐cyclodextrin (R₁? Ph? NO₂), mono[6‐deoxy‐6‐(3‐nitrobenzamido)]‐per‐O‐methyl‐β‐cyclodextrin (R₂? Ph? NO₂) and heptakis[6‐deoxy‐6‐(4‐nitrobenzamido)‐2,3‐di‐O‐methyl]‐β‐cyclodextrin [R₃? (Ph? NO₂)₇] were synthesized. Purity and composition of the obtained substances were checked. Electroreduction of nitro groups of the new synthesized compounds was investigated on mercury electrode using cyclic voltammetry and chronocoulometry. The parameters of the reduction processes of ? NO₂ groups of the investigated compounds were found not to be comparable to the reduction of nitrobenzene under the same experimental conditions. Moreover, the electroreduction of nitro groups in these nitrophenyl derivatives was dependent on pH, the type of the studied compound, and slightly on the solvent composition. All the reactants were strongly adsorbed on mercury electrode. In the case of R₃? (Ph? NO₂)₇, its seven nitro groups were reduced practically at the same potential, and no radical anion formation was observed. Copyright © 2007 John Wiley & Sons, Ltd.     

Temperature dependence of pre‐edge features in Ti K‐edge XANES spectra for ATiO3 (A = Ca and Sr), A2TiO4 (A = Mg and Fe), TiO2 rutile and TiO2 anatase

XANES (X‐ray absorption near‐edge structure) spectra of the Ti K‐edges of ATiO₃ (A = Ca and Sr), A₂TiO₄ (A = Mg and Fe), TiO₂ rutile and TiO₂ anatase were measured in the temperature range 20–900 K. Ti atoms for all samples were located in TiO₆ octahedral sites. The absorption intensity invariant point (AIIP) was found to be between the pre‐edge and post‐edge. After the AIIP, amplitudes damped due to Debye–Waller factor effects with temperature. Amplitudes in the pre‐edge region increased with temperature normally by thermal vibration. Use of the AIIP peak intensity as a standard point enables a quantitative comparison of the intensity of the pre‐edge peaks in various titanium compounds over a wide temperature range.     

Ethenyl indoles as neutral hydrophobic fluorescence probes

3‐(4‐Nitrophenylethenyl‐E)‐NH‐indole ( 1 ), 3‐(4‐nitrophenyl ethenyl‐E)‐N‐acetylindole ( 2 ), and 3‐(4‐nitrophenylethenyl‐E)‐N‐benzenesulfonylindole ( 3 ) are relatively less fluorescent in organic solvents, with fluorescence quantum yield (Φ_f) in the range of 0.002 to 0.066 depending on the solvent polarity. However, in bovine serum albumin (BSA)‐phosphate buffer, the fluorescence of these compounds gets drastically enhanced with Φ_f in the range of 0.21 to 0.67, depending on the substituent on the indolic nitrogen atom. Additionally, linear increase in the fluorescence intensity of 2 and 3 occurs on increasing the BSA concentration. These fluorescence properties together with the neutral, hydrophobic nature of these compounds make these fluorophores good fluorescence probe for studying the micropolarity of proteins like BSA and in general the ligand–protein interactions. Copyright © 2007 John Wiley & Sons, Ltd.     

Study of chemical shift in Ll and Lƞ X‐ray emission lines in different chemical forms of 48Cd and 50Sn compounds using WDXRF technique

Chemical shift in Ll and L? X‐ray emission lines of ₄₈Cd and ₅₀Sn elements in various chemical compounds was determined with high resolution wavelength dispersive X‐ray fluorescence (WDXRF) spectrometer. The positive and negative shifts were measured in ₄₈Cd compounds viz, CdS, CdB₄O₇, CdCl₂, Cd₃(PO₄)₂, CdCO₃, CdI₂ and CdO with reference to pure Cd foil and ₅₀Sn compounds viz, Sn(CrO₄)₂, SnO, SnO₂, SnCl₂, SnF₂, SnF₄ with reference to pure Sn foil. The measured energy shifts in Ll X‐ray emission lines range from ?0.47 to 1.82 eV and L? emission lines range from ?2.67 to 1 eV for both compounds. The effective charges (q, q ^/ , q ^// , and q ^/// ) were calculated from four models (Pauling method, Suchet method, Levine method and Batsonav method) and found to be linear dependence with chemical shift. The measured chemical shifts were correlated with effective charge, number of ligands and electronegativity of the central metal atom in the given compounds.     

Theoretical investigations on 4,4′,5,5′‐tetranitro‐2,2′‐1H,1′H‐2,2′‐biimidazole derivatives as potential nitrogen‐rich high energy materials

The ―NH₂, ―NO₂, ―NHNO₂, ―C(NO₂)₃ and ―CF(NO₂)₂ substitution derivatives of 4,4′,5,5′‐tetranitro‐2,2′‐1H,1′H‐2,2′‐biimidazole were studied at B3LYP/aug‐cc‐pVDZ level of density functional theory. The crystal structures were obtained by molecular mechanics (MM) methods. Detonation properties were evaluated using Kamlet–Jacobs equations based on the calculated density and heat of formation. The thermal stability of the title compounds was investigated via the energy gaps (?E_{LUMO ? HOMO}) predicted. Results show that molecules T5 (D = 10.85 km·s^?1, P = 57.94 GPa) and T6 (D = 9.22 km·s^?1, P = 39.21 GPa) with zero or positive oxygen balance are excellent candidates for high energy density oxidizers (HEDOs). All of them appear to be potential explosives compared with the famous ones, octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetraazocane (HMX, D = 8.96 km·s^?1, P = 35.96 GPa) and hexanitrohexaazaisowurtzitane (CL‐20, D = 9.38 km·s^?1, P = 42.00 GPa). In addition, bond dissociation energy calculation indicates that T5 and T6 are also the most thermally stable ones among the title compounds. Copyright © 2014 John Wiley & Sons, Ltd.     

Determining the excited‐state substituent constants of furyl and thienyl groups

Six series of styrene derivatives XCH═CHArY (total of 65) containing the styrene parent molecular skeleton were synthesized (here, Y is OMe, Me, H, F, Cl, CF₃, CN, and NO₂, and X is 2‐furyl, 3‐furyl, 2′‐methyl‐2‐furyl, 2‐thienyl, 3‐thienyl, and 2′‐methyl‐2‐theniyl). Their ultraviolet absorption spectra were measured in anhydrous ethanol, and their wavelength of absorption maximum λ_max was recorded. For the wavenumber ν_max (cm^?1, ν_max = 1/λ_max) of the obtained λ_max, a quantitative correlation analysis was performed, and 6 excited‐state substituent constants of groups X were obtained by means of curve‐fitting method. Taking the ν_max values of total 90 compounds of styrene derivatives as a data set (including 25 compounds from reference and 65 compounds of this work), a quantitative correlation analysis was performed, and the reliability of the obtained was verified. In addition, 12 samples of disubstituted Schiff bases (XCH═NArY) involving the above groups X were synthesized, and their ν_max values were recorded. Using these 12 ν_max together with the 14 ν_max values of Schiff bases taken from reference (total of 26 compounds), it was further verified that the values are reliable by means of quantitative correlation method.     

Influence of crystal structure,ligand environment and morphology on Co L‐edge XAS spectral characteristics in cobalt compounds

The electronic structure of a material plays an important role in its functionality for different applications which can be probed using synchrotron‐based spectroscopy techniques. Here, various cobalt‐based compounds, differing in crystal structure, ligands surrounding the central metal ion and morphology, have been studied by soft X‐ray absorption spectroscopy (XAS) at the Co L‐edge in order to measure the effect of these parameters on the electronic structure. A careful qualitative analysis of the spectral branching ratio and relative intensities of the L₃ and L₂ peaks provide useful insight into the electronic properties of compounds such as CoO/Co(OH)₂, CoCl₂.6H₂O/CoF₂.4H₂O, CoCl₂/CoF₂, Co₃O₄ (bulk/nano/micro). For further detailed analysis of the XAS spectra, quantitative analysis has been performed by fitting the spectral profile with simulated spectra for a number of cobalt compounds using crystal field atomic multiplet calculations.     

Magnetism and electronic correlations in the iron aluminides R Fe2Al10 (R = Y,Yb)

YFe₂Al₁₀ and YbFe₂Al₁₀ are new additions to the currently investigated rare‐earth (R) series of compounds RT₂Al₁₀ in which T is Fe, Ru, or Os. Unusual physical properties are drawing considerable attention to this group of compounds. Intriguingly, very small moments order in CeRu₂Al₁₀ at as high as 27 K, whereas CeFe₂Al₁₀ is a Kondo insulator with very strong hybridization of the Ce magnetic moments and no magnetic ordering at all. Here we present the first results of two further iron‐based compounds YFe₂Al₁₀ and YbFe₂Al₁₀ as a timely contribution to the knowledge of the physics at work in this system. In YFe₂Al₁₀ we find signatures of correlated electrons and the low‐temperature results of specific heat, magnetic susceptibility and electrical resistivity are indicative of ferromagnetic quantum criticality. In YbFe₂Al₁₀ localized f‐electron spins of Yb become involved in correlations with a moderately enhanced electronic specific heat that classifies it as a non‐ordered heavy‐fermion compound. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Complexation of bis‐crown stilbene with alkali and alkaline‐earth metal cations. Ultrafast excited state dynamics of the stilbene‐viologen analogue charge transfer complex

The complex formation of bis(18‐crown‐6)stilbene ( 1 ) and its supramolecular donor‐acceptor complex with N,N′‐bis(ammonioethyl) 1,2‐di(4‐pyridyl)ethylene derivative ( 2 ) with alkali and alkaline‐earth metal perchlorates has been studied using absorption, steady‐state fluorescence, and femtosecond transient absorption spectroscopy. The formation of 1 ?Mⁿ⁺ and 1 ?(Mⁿ⁺)₂ complexes in acetonitrile was demonstrated. The weak long‐wavelength charge‐transfer absorption band of 1 · 2 completely vanishes upon complexation with metal cations because of disruption of the pseudocyclic structure. The spectroscopic and luminescence parameters, stability constants, and 2‐stage dissociation constants were calculated. The initial stage of a recoordination process was found in the excited complexes 1 ?M⁺ and 1 ?(M⁺)₂ (M = Li, Na). The pronounced fluorescence quenching of 1 · 2 is explained by very fast back electron transfer (τ_et = 0.397 ps). The structure of complex 1 · 2 was studied by X‐ray diffraction; stacked ( 1 · 2 )_m polymer in which the components were connected by hydrogen bonding and stacking was found in the crystal. These compounds can be considered as novel optical molecular sensors for alkali and alkaline‐earth metal cations.     

4‐Alkyl‐2,2,6,6‐tetramethyl‐1,4,2,6‐oxaazadisilinanes: synthesis,structure, and conformational analysis

4‐Alkyl‐2,2,6,6‐tetramethyl‐1,4,2,6‐oxaazadisilinanes RN[CH₂Si(Me)₂]₂O [R = Me ( 1 ), i‐Pr ( 2 )] were synthesized by two methods which provided good yields up to 84%. Low temperature NMR study of compounds ( 1 ) and ( 2 ) revealed a frozen ring inversion with the energy barriers of 8.5 and 7.7 kcal/mol at 163 and 143 K, respectively, which is substantially lower than that for their carbon analog, N‐methylmorpholine. DFT calculations performed on the example of molecule ( 1 ) showed that N? Me_ax conformer to exist in the sofa conformation with the coplanar fragment C? Si? O? Si? C, and its N? Me_eq conformer in a flattened chair conformation. Copyright © 2009 John Wiley & Sons, Ltd.     

Fluorosolvatochromism of monomethyl indoles: further evidence in support of a new photophysical model for the indole chromophore

In this study, we investigated whether a change exists in the emitting state of the monomethyl indoles, dissolved in 1‐chlorobutane (ClB) and 2‐methylbutane (2MB), resulting from a dipolarity increase of the solvent. Analysis of the solvatochromism of monomethyl indoles in ClB at 343–133 K and in 2MB at 293–113 K leads to the following conclusions: (i) the state S₁ is the greatest contributor to the structured emission of 4‐Me‐, 5‐Me‐, and 7‐MeIndole; (ii) lowering the temperature of solutions of these compounds in ClB or 2MB below 113 K leads not to a structureless emission or bathochromic shift typical for an S₁′ state; (iii) 1‐Me‐, 2‐Me‐, 3‐Me‐, and 6‐MeIndole exhibit a structured emission typical for an S₁ state in 2MB but show an invariably structureless emission, subject to a red shift in ClB as the temperature is lowered, which is suggestive for an S₁′ emitting state; and (iv) lowering the temperature of solutions of the previous compounds below 133 K causes their emission spreading to become structured and blueshifted (two typical features for an emission from their S₁ state). Copyright © 2015 John Wiley & Sons, Ltd.     

The pKa theoretical estimation of C―H,N―H,O―H and S―H acids in dimethylsulfoxide solution

A scheme for the pK_a estimation of organic acids in dimethylsulfoxide (DMSO) solution based on quantum chemical calculations is proposed. The procedure of pK_a calculation requires several steps. The first is the calculation of the gas phase acidity of the compound. The G3MP2B3, G4MP2 as well as CBS‐QB3 composite methods made it possible to estimate values of gas phase acidities of an extensive set of structures with a high confidence level (standard deviations equal to 1.15, 1.13 and 1.29 kcal mol^?1, respectively; the test set included 91 compounds). The second step is the computation of the solvation correction with the integral equation formalism version of polarizable continuum model (IEF‐PCM)–B3LYP/6‐311+G(d,p) approximation. Within the bounds of our approach, the medium properties were covered only by the PCM model, i.e. the proposed procedure neglects specific interactions between DMSO and the solute. It was determined that the approach to pK_a estimation mentioned above is the most balanced in terms of accuracy, resource intensity and computation time cost. In the third step, the error of the pK_a calculation was decreased by correlation allowances. Correlation allowances were determined for each acid class (62 С―Н, 55 N―Н, 24 O―Н and 5 S―Н acids) in the range of 50 units in terms of logarithmic scale using the test set including 146 compounds. Seven O―H acids showing the ability to form cyclic dimers were separated into a discrete group. The proposed methodology was applied to the estimation of pK_a for trans‐ and cis‐dimethyl‐4,5‐dihydro‐3H‐pyrazol‐3,5‐dicarboxylates as well as for 5‐fluorouracil subject to competitive dissociation, the latter by N1―H or N3―H bonds. Copyright © 2014 John Wiley & Sons, Ltd.