Thermochemistry of the solid complex Gd(Et<Subscript>2</Subscript>dtc)<Subscript>3</Subscript>(phen)

Summary A ternary solid complex Gd(Et₂dtc)₃(phen) has been obtained from reactions of sodium diethyldithiocarbamate (NaEt₂dtc), 1,10-phenanthroline (phen) and hydrated gadolinium chloride in absolute ethanol. The title complex was described by chemical and elemental analyses, TG-DTG and IR spectrum. The enthalpy change of liquid-phase reaction of formation of the complex, Δ_rH^Θ_m(l), was determined as (-11.628±0.0204) kJ mol^-1 at 298.15 K by a RD-496 III heat conduction microcalorimeter. The enthalpy change of the solid-phase reaction of formation of the complex, Δ_rH^Θ_m(s), was calculated as (145.306±0.519) kJ mol^-1 on the basis of a designed thermochemical cycle. The thermodynamics of reaction of formation of the complex was investigated by changing the temperature of liquid-phase reaction. Fundamental parameters, the apparent reaction rate constant (k), the apparent activation energy (E), the pre-exponential constant (A), the reaction order (n), the activation enthalpy (Δ_rH^Θ_≠), the activation entropy (Δ_rS^Θ_≠), the activation free energy (Δ_rG^Θ_≠) and the enthalpy (Δ_rH^Θ_≠), were obtained by combination of the thermodynamic and kinetic equations for the reaction with the data of thermokinetic experiments. The constant-volume combustion energy of the complex, Δ_cU, was determined as (-18673.71±8.15) kJ mol^-1 by a RBC-II rotating-bomb calorimeter at 298.15 K. Its standard enthalpy of combustion, Δ_cH^Θ_m, and standard enthalpy of formation, Δ_fH^Θ_m, were calculated to be (-18692.92±8.15) kJ mol^-1 and (-51.28±9.17) kJ mol^-1, respectively.     

A Kinetic and Mechanistic Study on Substitution of Aqua Ligands from <Emphasis Type="Italic">cis</Emphasis>-diaqua-<Emphasis Type="Italic">bis</Emphasis>-(bipyridyl)-ruthenium(II) Complex by Thiosemicarbazide in Aqueous Medium

The kinetics of the interaction of thiosemicarbazide with cis-[Ru(bipy)₂(H₂O)₂]²⁺ (bipy = α α′-bipyridyl) have been studied spectrophotometrically as a function of [Ru(bipy)₂(H₂O)₂²⁺], [bipyridyl] and temperature, at a particular pH (4.8), where the substrate complex exists predominantly as the diaqua species and thiosemicarbazide as the neutral ligand. The reaction proceeds via an outer sphere association complex formation, followed by two slow consecutive steps. The first is the conversion of the aforementioned complex into the inner sphere complex, and the second step involves the entrance of another thiosemicarbazide molecule in the coordination zone of Ru(II) whereby, in each step, an aqua ligand is replaced. The association equilibrium constant (K_E) for the outer sphere complex formation has been evaluated together with rate constants for the two subsequent steps. Activation parameters have been calculated for both steps using the Eyring equation (ΔH₁^# = 25.37±1.6 kJ mol⁻¹, ΔS₁^# = −215.48 ± 4.5 J K⁻¹ mol⁻¹, ΔH₂^# = 24.24 ± 1.1 kJ mol⁻¹, ΔS₂^# = −207.14 ± 3.0 J K⁻¹ mol⁻¹). The low enthalpy of activation and large negative value of entropy of activation indicate an associative mode of activation for both aqua ligand substitution processes. From the temperature dependence of K_E, the thermodynamic parameters calculated are: ΔH⁰ = 10.75±0.54 kJ mol⁻¹ and ΔS⁰ = 84.67 ± 1.75 J K⁻¹ mol⁻¹, which give a negative ΔG⁰ value at all temperatures studied, supporting the spontaneous formation of an outersphere association complex prior to the first step.     

NMR study of the dynamic behaviour of the system 2-ethylhexylsodium-2-ethylhexyllithium in heptane

Mixtures of 2-ethylhexylsodium and 2-ethylhexyllithium are studied by ¹H- and ¹³C-NMR spectroscopy in the temperature range from 20 to −50°C in hydrocarbon solutions. Characteristic temperature-dependent spectra obtained are indicative of dynamic exchange processes taking place in the system. The following activation parameters are found: ΔH^≠=31.7±2.7 kJ mol⁻¹; ΔG^≠₃₁₃=58.7±0.6 kJ mol⁻¹; ΔS^≠=−86.37±10.8 J mol⁻¹ K⁻¹. The negative value of the activation entropy indicates that the exchange proceeds through the associative mechanism. The participation in exchange reactions of aggregates, containing both sodium and lithium derivatives, is suggested.     

Thermodynamic characteristics of thermal dissociation of platinum tetrachloride

The pressure of thermal dissociation of platinum tetrachloride by the first step PtCl₄(s) = PtCl₃(s) + 0.5 Cl₂(g) was measured by the static method with a quartz membrane-gauge zero-pressure manometer. An approximating equation for the dissociation pressure vs. temperature was found. The enthalpy (52160±880 J mol⁻¹) and entropy (72.1±1.6 J mol⁻¹ K⁻¹) of dissociation were calculated. The heat of formation found for platinum tetrachloride (−246.3±1.3 kJ mol⁻¹) at 298.15 K agrees well with the value obtained by the calorimetric method (−245.6±1.9 kJ mol⁻¹).__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2028–2031, October, 2004.     

Molecular structure and decomposition mechanism of peracetic acid esters AcOOR (R = Me,Bu<Superscript>t</Superscript>)

The molecular structure and conformational mobility of methyl and tert-butyl esters of peracetic acid AcOOR (R = Me (1), Bu^t (2)) were studied by the ab initio MP4(SDQ)//MP2(FC)/6-31G(d,p) method and density functional B3LYP/6-31G(d,p) approach. The B3LYP calculated equilibrium conformations of the molecules are characterized by the C-O-O-C torsion angles of 93.6° (1) and 117.0° (2). Structural features of the molecules under study and a distortion of tetrahedral bond configuration at the C_α atom were explained using the natural bonding orbital approach. The standard enthalpies of formation of AcOOMe (−328.5 kJ mol⁻¹) and AcOOBu^t (−440.4 kJ mol⁻¹) were determined using the G2 and G2(MP2) computational schemes and the isodesmic reaction approach. The transition state of AcOOMe decomposition into AcOOH and formaldehyde was calculated (E _a = 122.8 kJ mol⁻¹). The thermal effects of homolytic decomposition of the peroxy esters following a concerted mechanism (Me^· + CO₂ + ^·OR) and simple homolysis of the peroxide bond (AcO^· + ^·OR) were found to be 97.5±0.3 and 155.1±0.3 kJ mol⁻¹, respectively. At temperatures below 400 K, the most probable decomposition mechanism of peroxy esters 1 and 2 involves simple homolysis of the O-O bond.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2021–2027, October, 2004.     

The mean enthalpy of the lanthanide-oxygen bond in 2,2,6,6-tetramethyl-3,5-heptanedione chelates of praseodimium and holmium

The general thermochemical reaction LnCl₃·6H₂O(c)+3Hthd(1)+73.92H₂O(1) = Ln(thd)₃(c) +3HCl·26.64H₂O(aq); rHm (Ln = Pr, Ho and thd = 2,2,6,6-tetramethyl-3,5-heptanedionate) was employed to determine through solution-reaction calorimetry at 298.15 K the standard molar enthalpies of formation of crystalline chelates, –2434.3±11.5 (Pr) and –2384.8±11.5 (Ho) kJ mol^–1. These values and the corresponding molar enthalpies of sublimation enabled the determination of the standard molar enthalpies of chelates in the gaseous phase. From these values the mean enthalpies of the lanthanide-oxygen bond, 265±10 (Pr) and 253±10 (Ho) kJ mol^–1 were calculated.     

Tensimetric investigation of the CrCl<Subscript>3</Subscript>—Cl<Subscript>2</Subscript> system in the temperature range of 600–1200 K

The sublimation pressure of chromium trichloride was measured by the static method with a quartz membrane-gauge manometer in the temperature range of 875–1230 K. An approximating equation for the sublimation pressure vs. temperature was found. The enthalpy (259.4±4 kJ mol^–1) and the entropy (224.2±3.5 J mol^–1 K^–1) of sublimation at 298 K were calculated. For the process 2 CrCl₃(g) + Cl₂(g) = 2 CrCl₄(g), the following values were obtained: _r H°₂₉₈ = –207.1±11.6 kJ mol^–1 and _r S°₂₉₈ = –173.6±10 5 J mol^–1 K^–1.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1561–1564, August, 2004.     

Formation of a rhodium(II) monohydrido complex derived from wilkinson's complex RhCl(PPh3)3 in the interlamellar spaces of montmorillonite and catalytic hydrogenation of cyclohexene

The interaction of molecular hydrogen with [Rh(PPh₃)₃]⁺ (1a) “immobilized” in the interlamellar spaces of montmorillonite resulted in the formation of a monohydrido complex, [Rh^IIH(PPh₃)₃] (2a), characterized by electrochemical data of the clay-loaded electrode, IR, EPR and hydrogen absorption studies. Heterogenized homogeneous catalytic hydrogenation of cyclohexene catalysed by 1a was investigated in the temperature range 283–313 K. The order of reaction with respect to cyclohexene and hydrogen concentration is fractional and first order with respect to catalyst concentration. Thermodynamic parameters ΔH⁰ and ΔS⁰ corresponding to the formation of the monohydrido species were found to be 18 kcal mol⁻¹ and 61 e.u., respectively. The activation enthalpy, ΔH^‡, and entropy, ΔS^‡, for the hydrogenation of cyclohexene by the Rh^II—H complex in clay are more negative by about 2 kcal mol⁻¹ and 7 e.u. compared to Wilkinson's catalyst, RhCl(PPh₃)₃ (1), in homogeneous solution.     

Ligand exchange reaction of Zn(II)-acetylacetonate complex with 5,10,15,20-tetraphenyl-21H,23H-porphinetetrasulfonic acid

Ligand exchange reaction of Zn(II)-acetylacetonate complex (Zn-acac₂) with 5,10,15,20-tetraphenyl-21H,23H-porphinetetrasulfonic acid (H₂TPPS) has been investigated spectrophotometrically and radiometrically. The exchange reaction was observed by spectral change from H₂TPPS to Zn-TPPS or activity of⁶⁵Zn(acac)₂ extracted into the chloroform phase. The 2nd order rate constants (k ₂) for the exchange reaction at 70 °C and at pH 7.8 were found to be 32.8±2.3 and 31.2±3.2 M^–1·s^–1 from the spectrometric and radiotracer experiments, respectively. For the direct complexation of Zn(II) with H₂TPPS, a similar 2nd order rate constant (k=32.4±4.7 M^–1·s^–1) was obtained as that in the ligand exchange reaction. The activation energies (E) for the exchange and the formation of Zn-TPPS were found to be 69.3±0.2 and 69.4±0.2 kJ·mol^–1, respectively, in the temperature range from 40 to 70 °C.     

Calorimetric determination of enthalpy changes for the proton ionization of N-tris(hydroxymethyl)methyl-4-aminobutanesulfonic acid (TABS), N-tris(hydroxymethyl)methyl-3-aminopropanesulfonic acid (TAPS) and 3-[N-tris(hydroxymethyl)methylamino]-2-hyroxypropane sulfonic acid (TAPSO) in water–methanol mixtures

Enthalpies for the two proton ionizations of the biochemical buffers N-tris(hydroxymethyl)methyl-4-aminobutanesulfonic acid (TABS), N-tris(hydroxymethyl)methyl-3-aminopropanesulfonic acid (TAPS) and 3-[N-tris(hydroxymethyl)methylamino]-2-hyroxypropane sulfonic acid (TAPSO) were obtained in water–methanol mixtures with methanol mole fraction (X_m) from 0 to 0.360. The ionization enthalpy for the first proton (ΔH₁) of all three buffers was small and exhibited slight changes upon methanol addition. The ionization enthalpy of the second proton (ΔH₂) of TABS increased from 39.6 to 49.8 kJ mol⁻¹ and for TAPS from 40.1 to 43.2 kJ mol⁻¹, with a minimum of 38.2 kJ mol⁻¹ at X_m = 0.059. For TAPSO the increase was from 33.1 to 35.6 kJ mol⁻¹ at X_m = 0.194, with measurements at higher X_m precluded by low solubility of TAPSO in methanol rich solvents. The solvent composition was selected so as to include the region of maximum structure enhancement of water by methanol. The results were interpreted in terms of solvent–solvent and solvent–solute interactions.     

Kinetics and mechanisms of the catalyzed decomposition of hydrogen peroxide by ethylenebis(oxyethylenedinitrilo)tetracetate complex of iron(III)

The rate of decomposition of H₂O₂ in the presence of Fe(III)-y complex (y is ethylenebis(oxyethylenedinitrilo)tetraacetic acid (EGTA) anion) was investigated under variable conditions of pH and temperature, various water-miscible solvents, and different concentrations of H₂O₂, [Fe-y]⁻, and acetate ions. The following rate law holds: Rate = (k₁K₃K₄/[H⁺]) [Fe-y(OH)]²⁻ [H₂O₂] at pH less than 9.80, and Rate = (k₂K₅[H⁺]/K₃) [Fe-y(OH)₂]³⁻[OOH]⁻ at pH above 9.80. The values of k₁K₄and k₂K₅ at 25 °C were found to be 1523 and 0.747 M⁻¹ S⁻¹, respectively. Activation enthalpy and activation entropy for this reaction were determined from Arrhenius plots and found to be ΔH^* = 34.38 K J mol⁻¹ and ΔS^* = −167.2 J K⁻¹ mol⁻¹.     

Structure determination from powder diffraction data and thermal behaviour of layered lead nitrate oxalate hydrate, Pb2(NO3)2(C2O4).2H2O

The mixed lead nitrate oxalate, Pb₂(NO₃)₂(C₂O₄).2H₂O, has been obtained in a polycrystalline form in the course of a study on precursors of nanocrystalline PZT-type oxides. Its crystal structure has been solved from powder diffraction data collected using a monochromatic radiation from a conventional X-ray source. The symmetry is monoclinic, space group P2₁/c (No. 14), the cell dimensions are a=10.623(2) Å, b=7.9559(9) Å, c=6.1932(5) Å, β=104.49(1)° and Z=4. The structure consists of a stacking of complex double sheets parallel to (1 0 0), forming layers held together by hydrogen bonds. The sheets result from the condensation of PbO₁₀ polyhedra, in which the oxalate and nitrate groups, as well as water molecules, play a major role. The structure is discussed in terms of Pb---O distances, polyhedra shape and lead coordination, with emphasis on the dimensional polymerisation role of water molecules. The thermal behaviour of this layered compound is carefully described from temperature-dependent powder diffraction and thermogravimetric measurements. The enthalpy, Δ_rH=232(3) kJ mol⁻¹, and entropy, Δ_rS=532(8) J K⁻¹ mol⁻¹, of the dehydration reaction have been determined. The high value of Δ_rH demonstrates that the water molecules are strongly bonded in the structure. The complex decomposition proceeds through the crystallisation and decomposition of Pb(NO₃)₂(C₂O₄) into Pb(NO₃)₂ and PbC₂O₄, and, finally, various lead oxides.     

The kinetics of the dissolution of monoclinic pyrrhotite in aqueous acidic solutions

Using the rotating disc method, the rates of dissolution of natural monoclinic pyrrhotite, FeS_1.14, in oxygen-free aqueous solutionsS([H⁺]=0.1, [Na⁺]=0.9, [ClO ₄ ^– ]=1.0 mol kg^–1) were determined. In the temperature range 40–90 °C the dissolution reaction occurs under kinetic control; the activation energy being 14±1 kcal mol^–1 (50±5 kJ mol^–1).

---

Die Kinetik der Auflösung von monoklinem Pyrrhotin in sauren wäßrigen Lösungen

Zusammenfassung Die Auflösungsgeschwindigkeit von natürlichem monoklinen Pyrrhotin, FeS_1.14, wurde in sauerstofffreien LösungenS([H⁺]=0.1, [Na⁺]=0.9, [ClO ₄ ^– ]=1.0 mol kg^–1) mit Hilfe der Methode der rotierenden Scheibe bestimmt. Im Temperaturbereich von 40–90° erfolgt die Auflösungsreaktion kinetisch kontrolliert, wobei eine Aktivierungsenergie von 14±1 kcal mol^–1 (59±5 kJ mol^–1) gefunden wurde.

     

Study on the interaction between antibacterial drug and bovine serum albumin: A spectroscopic approach

The binding of sulfamethoxazole (SMZ) to bovine serum albumin (BSA) was investigated by spectroscopic methods viz., fluorescence, FT-IR and UV–vis absorption techniques. The binding parameters have been evaluated by fluorescence quenching method. The thermodynamic parameters, ΔH°, ΔS°and ΔG° were observed to be −58.0 kJ mol⁻¹, −111 J K⁻¹ mol⁻¹ and −24 kJ mol⁻¹, respectively. These indicated that the hydrogen bonding and weak van der Waals forces played a major role in the interaction. Based on the Forster's theory of non-radiation energy transfer, the binding average distance, r, between the donor (BSA) and acceptor (SMZ) was evaluated and found to be 4.12 nm. Spectral results showed the binding of SMZ to BSA induced conformational changes in BSA. The effect of common ions and some of the polymers used in drug delivery for control release was also tested on the binding of SMZ to BSA. The effect of common ions revealed that there is adverse effect on the binding of SMZ to BSA.     

Thermodynamic characteristics of thermal dissociation of platinum trichloride

Single crystals of platinum trichloride were grown for the first time. The IR spectrum of single-crystal PtCl₃ was recorded. The pressure of thermal dissociation of PtCl₃ was measured by the static method with a quartz membrane-gauge zero-pressure manometer. An approximating equation for the dissociation pressure vs. temperature (540 K ≤ T ≤ 775 K) for the reaction 2 PtCl₃(s) → 2 PtCl₂(s) + Cl₂(g) was found. The enthalpy (123.1±1.7 kJ mol⁻¹) and entropy (183.6±2.8 J mol⁻¹ K⁻¹) for the dissociation of PtCl₃(s) were calculated at 298.15 K.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2032–2034, October, 2004.     

Phosphate desorption kinetics from goethite as induced by arsenate

The kinetics of the arsenate-induced desorption of phosphate from goethite has been studied with a batch reactor system and ATR-FTIR spectroscopy. The effects of arsenate concentration, adsorbed phosphate, pH and temperature between 10 and 45 °C were investigated. Arsenate is able to promote phosphate desorption because both oxoanions compete for the same surface sites of goethite. The desorption occurs in two steps: a fast step that takes place in less than 5 min and a slow step that lasts several hours. In the slow step, arsenate ions exchange adsorbed phosphate ions in a 1:1 stoichiometry. The reaction is first order with respect to arsenate concentration and is independent of adsorbed phosphate under the experimental conditions of this work. The rate law is then r = k_r[As], where r is the desorption rate, k_r is the rate constant and [As] is the arsenate concentration in solution. The values of k_r at pH 7 are 1.87 × 10⁻⁵ L m⁻² min⁻¹ at 25 °C and 7.95 × 10⁻⁵ L m⁻² min⁻¹ at 45 °C. The apparent activation energy of the desorption process is 51 kJ mol⁻¹. Data suggest that the rate-controlling process is intraparticle diffusion of As species, probably As diffusion in pores. ATR-FTIR spectroscopy suggests that adsorbed phosphate species at pH 7 are mainly bidentate inner-sphere surface complexes. The identity of these complexes does not change during desorption, and there is no evidence for the formation of intermediate species during the reaction.     

Rate and Equilibrium Constants of Benzoyl Group Transfer between Pyridine N-Oxides

Kinetic characteristics of 19 transfer reactions of benzoyl group from N-benzoyloxypyridinium salts to pyridine N-oxides and 4-dimethylaminopyridine were studied in acetonitrile by the stopped-flow method. The rate of an identical reaction for 4-methoxypyridine was measured by dynamic NMR spectroscopy. For 5 other identical reactions the rates were estimated from Bronsted correlations. Equilibrium constants were estimated with the use of UV spectrophotometry (6), IR spectroscopy (2), from kinetic data (K _ij = k _ij /k _ji ) (2), and in one case as logK _i−j = logK _i−x − logK _j−x . The second order rate constants (k _ij ) varied in the range 10²–10⁵ l mol⁻¹ s⁻¹, the equilibrium constants (K _ij ) in the range 10²–10⁻²; the activation parameters (ΔH ^≠) were within 15–50 kJ mol⁻¹, (−ΔS ^≠) −20–110 J mol⁻¹ K⁻¹. The reactions under study occur in a single stage following the concerted S_N2 mechanism through an early associative transition state. The benzoyl groups exchange rate and equilibrium are well described by simplified Marcus equation (omitting the quadratic term).__________Translated from Zhurnal Organicheskoi Khimii, Vol. 41, No. 5, 2005, pp. 788–792.Original Russian Text Copyright © 2005 by Rybachenko, Schroeder, Chotii, Lenska, Red’ko, Kovalenko.     

Solid-state characterization of chloroprocaine hydrochloride

Summary Chloroprocaine hydrochloride (2-CPCHC) is a local anaesthetic agent of the ester type preferentially used for epidural anaesthesia. The compound, official in the USP, was found to exist in two polymorphic crystal forms which have been characterized by thermomicroscopy, differential scanning calorimetry (DSC), pycnometry, FTIR-, FT-Raman-spectroscopy as well as X-ray powder diffractometry. Based on these data the relative thermodynamic stability of the two forms was determined and is represented in a semi-schematic energy/temperature diagram. Mod. I° is the thermodynamically stable form at room temperature. This form is present in commercial products and can be crystallized from ethanol. Mod. II can be obtained by annealing the supercooled melt in a temperature range between 100 and 130°C. Upon heating mod. II exhibits an exothermic phase transition (Δ_trsH_II-I: -5.0±0.5 kJ mol^-1) at about 134°C to mod. I° (melting point 175°C, Δ_fusH_I: 46.6±0.6 kJ mol^-1). The exothermic transformation of mod. II to mod. I° confirms that mod. I° is thermodynamically stable in the entire temperature range (heat of transition rule) whereas mod. II is monotropically related to mod. I°, i.e. is metastable at all temperatures below its melting point. Mod. II is of low kinetic stability at room temperature and the transformation to mod. I° starts within a few minutes at room temperature. The N-H band in the infrared spectrum of mod. I° (3433 cm^-1) lies at significantly higher wavenumbers than that of mod. II (3413 cm^-1) indicating differences in the hydrogen bonding arrangement. Furthermore, the measured density of mod. I° is lower than the density of mod. II and thus both, the IR- and the density-rule are violated in this polymorphic system.     

Voltammetric studies on the α-tocopherol anion and α-tocopheroxyl (Vitamin E) radical in acetonitrile

The α-tocopheroxyl radical was generated voltammetrically by one-electron oxidation of the α-tocopherol anion (E ^r_1/2=−0.73 V versus Ag|Ag⁺) that was prepared by reacting α-tocopherol with Et₄NOH in acetonitrile (with Bu₄NPF₆ as the supporting electrolyte). Cyclic voltammograms recorded at variable scan rates (0.05–10 V s⁻¹), temperatures (−20 to 20°C) and concentrations (0.5–10 mM) were modelled using digital simulation techniques to determine the rate of bimolecular self-reaction of α-tocopheroxyl radicals. The k values were calculated to be 3×10³ l mol⁻¹ s⁻¹ at 20°C, 2×10³ l mol⁻¹ s⁻¹ at 0°C and 1.2×10³ l mol⁻¹ s⁻¹ at −20°C. In situ electrochemical-EPR experiments performed at a channel electrode confirmed the existence of the α-tocopheroxyl radical.