一种聚合型弱阳离子交换/亲水相互作用色谱固定相的制备及色谱性能

通过亲核取代反应将聚乙烯马来酸酐键合到氨基硅胶表面,然后将残余的马来酸酐水解,制备了一种弱阳离子交换/亲水相互作用高效液相色谱固定相(Sil-PolyCOOH),通过固体核磁、ζ-电势及元素分析对固定相进行了表征。选取核苷和核酸碱为模型化合物,通过考察流动相组成,离子强度和pH等因素对溶质保留的影响,探讨了固定相的分离性能和保留机理,结果表明,该固定相的保留机理同时涉及亲水分配相互作用和多重主客体作用力。该固定相还对糖类、敌草快与百草枯等化合物具有良好的分离性能。上述研究结果表明该固定相在极性化合物的分离上具有良好的应用前景。     

Adenosine Cyclic 3′, 5′-Phosphoramidate and N,N-Dimethylphosphoramidate: Synthesis Via Symmetrical and Mixed Anhydrides and Hydrolysis

Abstract

The title compounds were synthesized by converting cyclic AMP with a sulfonyl chloride to the symmetrical anhydride or with diphenyl phosphorochloridate to the mixed anhydride, then aminolyzing the anhydrides without isolation. The synthesis preferentially gave Sp-amides. Characteristic differences were observed in the behavior of the unsubstituted amide and the dimethylamide under hydrolysis conditions.     

Amine/anhydride reaction versus amide/anhydride reaction in polyamide/anhydride carriers

Polyamide 6 (PA6) and poly(metaxylene adipamide) (PAmXD6) were blended in a batch mixer with anhydrides such as phthalic anhydride, n-octadecyl succinic anhydride, and anhydride-grafted ethylene propylene rubber. The melt viscosity, the solution viscosity, and chain end concentration were studied during the mixing. PA was first mixed 5 min to get an homogeneous melt prior to the anhydride addition. The introduction of the anhydride to the molten polyamide resulted in large decreases of melt and solution viscosities and of amine chain end concentrations. The anhydride units react with amine chain ends to form imide groups. The resulting low amine chain end concentration causes hydrolysis reaction to maintain the condensation equilibrium. As a consequence an increased carboxylic chain end concentration is observed. The imide concentration was studied by IR. It was shown that when most of the amine chain ends are consumed, the remaining anhydride reacts with amino groups formed by polyamide hydrolysis. © 1995 John Wiley & Sons, Inc.     

Kinetic Investigations of Reactions with Maleic Anhydride Copolymers and Model Compounds

Alternating copolymers that contain maleic anhydride (MAn) as a component occur in two different stereochemical configurations which are differentiated by their reactivity. Model compounds, 2, 3-dialkylsuccinic acids and their anhydrides, were investigated and it was demonstrated that there is a distinct difference between threo and erythro configurations in their chemical and physical behavior. Both configurations also occur in the alternating copolymers. Beside the model compounds, the alternating copolymers ethylene-MAn, propylene-MAn, and styrene-MAn were investigated in their reactions with amines, alcohols, and water (hydrolysis). The cis configurations showed the higher reaction rates. Reactions of the anhydride moieties with equimolar amounts of aniline, ethanol, and water demonstrated that reactions follow second-order rate laws. With excess reactant, the reaction follows a pseudo-first-order rate law. The rate constants depend on the degree of polymerization and on the comonomer. Increasing steric hindrance and molecular weight lead to a decrease of the reaction rate. Catalysis of the hydrolysis reaction by tertiary amines results in similar rate constants for the configurations of the substituted succinic acid anhydrides. The reasons are discussed.     

脂环族酸酐在不同极性气相色谱柱上的性能研究

研究了甲基四氢苯酐、甲基六氢苯酐、萜烯马来酸酐及氢化萜烯马来酸酐等脂族酸酐在HP-1、HP-5、OV-17和FFAP四种不同极性毛细管色谱柱上的色谱性能。分析结果表明,这四种脂环族酸酐均能在OV-17毛细管色谱柱上获得很好的峰形和分离效果。     

Photometric determination of maleic anhydride in maleinized adducts

A procedure is developed for the determination of maleic anhydride in maleinized adducts based on natural oils by the reaction yielding molecular complexes of 2-methylimidazole and maleic anhydride in dimethyl sulfoxide. The procedure can be used for the determination of maleic anhydride in polymers based on a mixture of anhydrides in the presence of acid.     

苯乙烯和马来酸酐包夹硅胶弱阳离子色谱柱的制备及其应用

用马来酸酐包夹硅基制备出一种新型弱阳离子色谱柱填料,它具有良好的色谱性能,可同时分离一价、二价金属阳离子。论述了固定相的制备条件。采用所制备的固定相对热电厂锅炉水样中的阳离子进行了测定。     

Aliphatic polyimides from phenylene bis(succinic anhydride) and bis(glutaric anhydride)

Meta and para derivatives of phenylene bis(succinic anhydride) and bis(glutaric anhydride) were obtained from 1,3- and 1,4-bis(β-cyano-β-carbethoxyvinyl)benzene with potassium cyanide or Meldrum acid followed by hydrolysis with concentrated hydrochloric acid and dehydration with acetic anhydride. Aliphatic polyimides were prepared from these anhydrides with six aromatic diamines through thermal ring closure of polyamic acids obtained by solution polymerization in dimethylacetamide, and thermal stability of these polyimides was examined by thermogravimetric analysis.     

Investigation of the reaction of some unsaturated dicarboxylic acid anhydrides with cyclic carbonates

This work reports attempts to extend to unsaturated anhydrides the rapid reaction of dicarboxylic acid anhydrides with ethylene carbonate to form polymer directly. The reaction of unsaturated diacid anhydrides with two cyclic carbonates, ethylene and propylene carbonate, leads to gelled products whenever the anhydride is capable of Michael addition, while an anhydride without such unsaturation gave linear polymer in- stead. The GC/MS results, along with efforts to trap radical reactions, support Michael addition as an explanation of gelation in these systems.     

Addition of a Silyl Ketene Acetal to α,β-Unsaturated Cyclic Anhydrides

Addition of [1-methoxy-2 methyl-1-propenyl)-oxy] trimethylsilane (MTS) to unsymmetrical α,β-unsaturated cyclic anhydrides (namely, itaconic anhydride and citraconic anhydride) as well as symmetrical anhydrides (namely, maleic anhydride and 2,3-dimethylmaleic anhydride) was investigated. Itaconic anhydride isomerizes to citraconic anhydride in the presence of MTS. In the presence of Lewis acid catalysts (Yb(OTf)₃/CH₂Cl₂), MTS adds to itaconic anhydride at room temperature in a 1,4-fashion. 1,2-Addition is the preferred pathway with both 2,3-dimethyl maleic anhydride and citraconic anhydride.     

Caged O-phosphorothioyl amino acids as building blocks for Fmoc-based solid phase peptide synthesis

The synthesis of 1-(2-nitrophenylethyl) caged O-phosphorothioylserine, -threonine, and -tyrosine derivatives is reported. These amino acid building blocks can be directly incorporated into peptides by Fmoc-based solid phase synthesis as their pentafluorophenyl esters or as symmetric anhydrides. Upon irradiation with UV light, the thiophosphate group, representing a hydrolysis resistant phosphate analog, is revealed.     

A new synthesis of carboxylic and carbonic acid anhydrides using phase transfer reactions

Acyl chlorides and alkylchloroformates smoothly reacted with one molar equivalent of sodium hydxoxide, using liquid-liquid phase transfer conditions to afford high yields of the corresponding symmtrical carboxylic and carbonic hemiester anhydrides. Unstable, anhydrides such as 4-nitrobenzoïc, 2-furoïc and methacrylic anhydrides, which are otherwise difficult to obtain, were easily prepared by this method. The reaction mechanism does not seem to involve intermediate hydrolysis of half the acid chloride into the corresponding sodium carboxylate.     

Infrared spectroscopy studies of the cyclic anhydride as the intermediate for the ester crosslinking of cotton cellulose by polycarboxylic acids. II. Comparison of different polycarboxylic acids

Polycarboxylic acids have been used as crosslinking agents for cotton cellulose. In our previous research, we used Fourier transform infrared (FT-IR) spectroscopy to investigate the formation of five-membered cyclic anhydride intermediates on cotton fabric by different polycarboxylic acids. In this research, we found that those polycarboxylic acids capable of forming both five- and six-membered cyclic anhydrides form only five-membered cyclic anhydrides. We compared the effectiveness of the polycarboxylic acids with different molecular structures for esterifying cellulose. Those polycarboxylic acids, which have their carboxyl groups bonded to the adjacent carbons of their molecular backbones and are capable of forming five-membered cyclic anhydrides, are more effective for esterifying cellulose than those polycarboxylic acids having their carboxyl groups bonded to the alternative carbons. The only six-membered cyclic anhydride identified is the anhydride formed on the cotton fabric treated with poly(acrylic acid). © 1996 John Wiley & Sons, Inc.     

Ring Opening Metathesis Polymerization of Bicyclic α,β‐Unsaturated Anhydrides for Ready‐to‐be‐grafted Polymers Having Tailored pH‐Responsive Degradability

Polymers having α,β‐unsaturated anhydrides as repeating units were synthesized by ring opening metathesis polymerization (ROMP). The anhydride moieties were ready‐to‐be‐grafted with amines to form acid‐labile cis‐α,β‐unsaturated acid amide linkages. The pH‐responsive reversible de‐grafting can be controlled by changing the intramolecular accessibility between acid and amide groups. The alendronate‐grafted ROMP polymers showed distinct pH‐dependent cytotoxicity according to the anhydride structures.     

Polyimides from 4,4′-(alkylene-α,ω-dioxy) bis(phenylsuccinic anhydride)s and bis(phenylglutaric anhydride)s

4,4′-(Alkylene-α,ω-dioxy)bis(phenylsuccinic anhydride)s and bis(glutaric anhydride)s were obtained by the condensation of 4,4′-diformyl-α,ω-diphenoxyalkanes with ethyl cyanoacetate followed by the addition of potassium cyanide or meldrum acid (2,2-dimenthyl-1,3-dioxane-4,6-dione), hydrolysis with concentrated hydrochloric acid, and dehydration with acetic anhydride. Alkylene groups were ethylene, trimethylene, and tetramethylene. Polyimides were prepared from these anhydrides with 4,4′-diaminodiphenyl ether, 4,4′-diaminodiphenyl sulfide, and 4,4′-diaminodiphenylmethane through thermal ring closure of polyamic acids obtained by solution polymerization in dimethylacetamide, and thermal stability of these polyimide film was examined by thermogravimetric analysis.     

羧酸衍生物取代甲基苯基聚硅烷制备杂取代聚硅烷

以甲基苯基聚硅烷　(PhSiMe　) n为原料 ,在无水AlCl3 存在下 ,通过与酰氯、酸酐及酯的取代反应合成了氯代聚硅烷及一系列共聚物 .在乙酰氯的作用下 ,　(PhSiMe　) n上的苯基能够被近乎完全的取代而生成氯代聚硅烷 .一元酸酐 (乙酸酐和丙酸酐 )在用酰氧基部分取代聚硅烷上苯基的同时 ,进行得更多的还是Cl取代 .而顺丁烯二酸酐、邻苯二甲酸酐和乙酸乙酯则只进行不完全的Cl取代 ,根据分子活性的不同得到取代比率各不相同的共聚物 .初步分析了各反应的过程 ,讨论了影响反应的因素 ,同时对于各产物的荧光和紫外特性也进行了分析和讨论     

Paradigms and Paradoxes: Aspects of the Energetics of Carboxylic Acids and Their Anhydrides

Making use of the enthalpies of formation of the well-established acetic acid and acetic anhydride, the energetics of other carboxylic acid anhydrides (with four or fewer carbons) are discussed. Some of these species are also well known, such as succinic and maleic anhydride. Others are less well known, such as ketene and carbon suboxide and even diatomic carbon and malonic anhydride. Still others are more evasive, such as the classical anhydrides of formic and oxalic acid.     

Analysis of some anhydrides as their corresponding acids by capillary electrophoresis

Summary The potential of capillary electrophoresis for the indirect determination of anhydrides was demonstrated by the analysis of five closely-related anhydrides as their corresponding acids. Direct analysis of such substances is generally difficult because of their susceptibility to hydrolysis. In this work anhydrides were first hydrolyzed in water, hydrolysis being monitored using micellar electrokinetic chromatography (MEKC) which separated neutral anhydrides and anions of corresponding acids. After hydrolysis, separation of the acids was quickly achieved within two minutes by reversed electroosmotic-flow, capillary electrophoresis (REF-CE), with UV detection at 210 nm.     

Alternating Copolymers from Alkyleneimines. I. Copolymers from Ethyleneimine and Dicarboxylic Anhydrides

Ethyleneimine and dicarboxylic anhydrides were copolymerized to alternating copolymers which possess an ester-amide in the repeating unit. The structure of copolymer was Identified by IR, NMR, and elemental analysis. On taking the structure of copolymer, the nucleophllic reactivity of ethyleneimine, and the electrophilic nature of dicarboxylic anhydride Into consideration, a reaction mechanism was elucidated. It Involves ring opening and a stepwise addition reaction in alternating manner, in that one monomer undergoes ring opening and chain propagation exclusively through the interaction with another monomer that is already present at the polymer chain end. The copolymers obtained from halogen containing dicarboxylic anhydrides are useful as fire-retarding additives for plastics and also as thermosetting resin precursor when anhydrides are partially replaced by maleic anhydride.     

Synthesis of Quinizarin and Its Derivatives under Conditions of Microwave Activation

In a microwave field, phthalic anhydride reacts with p-chlorophenol to give 1,4-dihydroxyanthraquinone (quinizarin) within 10 min. The reaction with 4-chlorophthalic anhydride occurs similarly. Phthalic and chlorophthalic acids can be used instead of anhydrides. 3-Nitrophthalic acid and 3,4,5,6-tetrabromophthalic anhydride do not react with p-chlorophenol under these conditions.