Synthesis of a eta 2-2,3-diphosphabutadiene complex of zerovalent platinum from the corresponding eta 2-phosphaalkyne complex

Hydrozirconation of the eta 2-phosphaalkyne complex [Pt(dppe)(eta 2-tBuCP)] with [ZrHCl(eta 5-C5H5)2], followed by treatment with the chlorophosphaalkene ClP=C(SiMe3)2 affords the eta 2-2,3-diphosphabutadiene complex [Pt(dppe)(eta 2-tBuC(H)=PP=C(SiMe3)2]. In the presence of [Pt(PPh3)2] the latter undergoes an addition reaction with water to afford the structurally characterised Pt(II) complex [Pt(dppe)(tBuCH2P(O)HPC(SiMe3)2].     

Sulfoxide carbon-sulfur bond activation

The alkynylsulfoxide, TMSCCSO(p-tolyl) (TMS = trimethylsilyl, tolyl = C6H4Me), undergoes reaction with (eta5-C5H5)Co(PPh3)2 at room temperature to give the cobaltosulfoxide complex, (C5H5)Co(PPh3)(eta1-CCTMS)[eta1-(S)-SO(p-tolyl)], which was characterized by X-ray crystallography. Exposure of this cobaltosulfoxide complex to oxygen gas leads to the formation of the corresponding metallosulfone complex, (C5H5)Co(PPh3)(eta1-CCTMS)[eta1-(S)-SO2(p-tolyl)], which was characterized by X-ray crystallography. Alternatively, in solution at room temperature, the metallosulfoxide is converted to a 1:4 mixture of the equatorial-equatorial and equatorial-axial bridging cobalt-thiolato dimers, {(C5H5)Co[mu-S(p-tolyl)]}2, respectively. The equatorial-equatorial isomer was characterized by X-ray crystallography.     

Structural isomers of aryl-substituted eta(3)-propargyl complexes: eta(2)-1-Metalla(methylene)cyclopropene and eta(3)-benzyl complexes

Hydride abstraction from C(5)Me(5)(CO)(2)Re(eta(2)-PhC triple bond CCH(2)Ph) (1) gave a 3:1 mixture of eta(3)-propargyl complex [C(5)Me(5)(CO)(2)Re(eta(3)-PhCH-C triple bond CPh)][BF(4)] (5) and eta(2)-1-metalla(methylene)cyclopropene complex [C(5)Me(5)(CO)(2)Re(eta(2)-PhC-C=CHPh)][BF(4)] (6). Observation of the eta(2)-isomer requires 1,3-diaryl substitution and is favored by electron-donating substituents on the C(3)-aryl ring. Interconversion of eta(3)-propargyl and eta(2)-1-metalla(methylene)cyclopropene complexes is very rapid and results in coalescence of Cp (1)H NMR resonances at about -50 degrees C. Protonation of the alkynyl carbene complex C(5)Me(5)(CO)(2)Re=C(Ph)C triple bond CPh (22) gave a third isomer, the eta(3)-benzyl complex [C(5)Me(5)(CO)(2)Re[eta(3)(alpha,1,2)-endo,syn-C(6)H(5)CH(C triple bond CC(6)H(5))]][BF(4)] (23) along with small amounts of the isomeric complexes 5 and 6. While 5 and 6 are in rapid equilibrium, there is no equilibration of the eta(3)-benzyl isomer 23 with 5 and 6.     

Reactivity patterns of thermally stable, terminal, electrophilic phosphinidene complexes towards diazoalkanes: oxidation at the phosphorus centre and formation of P-bound eta1-phosphaazine, eta1-phosphaalkene and eta3-diazaphosphaallene complexes

The thermally stable, terminal phosphinidene complexes [CpM(CO)2(eta1-PNiPr2)]AlCl4(Cp= Cp, Cp*; M = Fe) and [Cp*M(CO)3(eta1-PNiPr2)]AlCl4 (M = Cr, Mo, W) react with Ph2C=N=N to form terminal P-coordinated eta1-phosphaazine and eta3-diazaphosphaallene ligands, respectively, whereas [CpFe(CO)2(eta1-PNiPr2)]AlCl4 reacts with Me3SiCHN2 affording a terminal phosphorus bound eta1-phosphaalkene complex.     

Reduction of bis

The reduction of symmetric, fully-substituted titanocene dichlorides bearing two pendant omega-alkenyl groups, [TiCl2(eta5-C5Me4R)2], R = CH(Me)CH= CH2 (1a). (CH2)2CH=CH2 (1b) and (CH2)3CH=CH2 (1c), by magnesium in tetrahydrofuran affords bis(cyclopentadienyl)titanacyclopentanes [Ti(IV)[eta1:eta1: eta5:eta5-C5Me4CH(Me)CH(Ti)CH2CH(CH2(Ti))CH(Me)C5Me4]] (2a), [Ti(IV)[eta1:eta1:eta5: eta5-C5Me4(CH2)2CH(Ti)(CH2)2CH(Ti)(CH2)2C5Me4]] (2b) and [Ti(IV)[eta1:eta1:eta5:eta5-C5Me4(CH2)2CH(Ti)CH(Me)CH(Me)CH(Ti)(CH2)2C5Me4]](2c), respectively, as the products of oxidative coupling of the double bonds across a titanocene intermediate. For the case of complex 1c, a product of a double bond isomerisation is obtained owing to a preferred formation of five-membered titanacycles. The reaction of the titanacyclopentanes with PbCl2 recovers starting materials 1a from 2a and 1b from 2b, but complex 2c affords, under the same conditions, an isomer of 1c with a shifted carbon - carbon double bond, [TiCl[eta5-C5Me4(CH2CH2CH=CHMe)]2] (1c'). The titanacycles 2a-c can be opened by HCl to give ansa-titanocene dichlorides ansa-[[eta5:eta5-C5Me4CH(Me)CH2CH2CH(Me)CH(Me)C5Me4]TiCl2] (3a), ansa-[[eta5:eta5-C5Me4(CH2)8C5Me4]TiCl2] (3b), along with a minor product ansa-[[eta5:eta5-C5Me4CH2CH=CH(CH2)5C5Me4]TiCl2] (3b'), and ansa-[[eta5:eta5-CsMe4(CH2)3CH(Me)CH(Me)CH=CHCH2C5Me4]TiCl2] (3c), respectively, with the bridging aliphatic chain consisting of five (3a) and eight (3b, 3b' and 3c) carbon atoms. The course of the acidolysis changes with the nature of the pendant group; while the cyclopentadienyl ring-linking carbon chains in 3a and 3b are fully saturated, compounds 3c and 3b' contain one asymetrically placed carbon-carbon double bond, which evidently arises from the beta-hydrogen elimination that follows the HCl addition.     

Luminescent piano-stool complexes incorporating 1-(4-cyanophenyl)imidazole: synthesis, spectral, and structural studies

Three novel luminescent piano-stool arene ruthenium complexes of general formula [(eta(6)-arene)RuCl(2)(CPI)] (eta(6)-arene = benzene, 1, p-cymene, 2, and hexamethylbenzene, 3; CPI=1-(4-cyanophenyl)imidazole were prepared. The molecular structures of 2 and 3 were determined crystallographically. Reaction of 1-3 with EPh(3) (E = P, As, or Sb) and N-N donor bases such as 2,2'-bipyridine and 1,10-phenanthroline afforded cationic mononuclear complexes of general formula [(eta(6)-arene)RuCl(CPI)(EPh(3))](+) (eta(6)-arene = C(6)H(6), E = P (1a), E = As (1b), E = Sb(1c); eta(6)-arene = C(10)H(14), E = P (2a), E = As (2b), E = Sb (2c); eta(6)-arene = C(6)Me(6), E = P (3a), E = As (3b), E = Sb (3c)) and [(eta(6)-arene)Ru(N-N)(CPI)](2+) (eta(6)-arene = C(6)H(6), N-N = bipy (1d), N-N = phen (1e); eta(6)-arene = C(10)H(14), N-N = bipy (2d), N-N = phen (2e); eta(6)-arene = C(6)Me(6), N-N = bipy (3d), N-N = phen (3e)). Molecular structures of 1a and 2a were also confirmed by X-ray crystallography. Structural studies of the complexes 2, 3, 1a, and 2a supported coordination of CPI through the imidazole nitrogen and the presence of a pendant nitrile group. Structural data also revealed stabilization of crystal packing in the complexes 2, 3, and 2a by C-H...X (X = Cl, F) type inter- and intramolecular interactions and in complex 1a by pi-pi stacking. Moreover, neutral homonuclear bimetallic complexes 2f,g were prepared by using complex 2 as a metallo-ligand, where CPI acts as a bridge between two metal centers. Emission spectra of the mononuclear complexes [(eta(6)-arene)RuCl(2)(CPI)] and its derivatives exhibited intense luminescence when excited in the metal to ligand charge-transfer band.     

Formation of cis-enediyne complexes from rhenium alkynylcarbene complexes

Dimerization of the alkynylcarbene complex Cp(CO)(2)Re=C(Tol)C(triple bond)CCH(3) (8) occurs at 100 degrees C to give a 1.2:1 mixture of enediyne complexes [Cp(CO)(2)Re](2)[eta(2),eta(2)-TolC(triple bond)CC(CH(3))=C(CH(3))C(triple bond)CTol] (10-Eand 10-Z), showing no intrinsic bias toward trans-enediyne complexes. The cyclopropyl-substituted alkynylcarbene complex Cp(CO)(2)Re=C(Tol)C(triple bond)CC(3)H(5) (11) dimerizes at 120 degrees C to give a 5:1 ratio of enediyne complexes [Cp(CO)(2)Re](2)[eta(2),eta(2)-TolC(triple bond)C(C(3)H(5))C=C(C(3)H(5))C(triple bond)CTol] (12-E and 12-Z); no ring expansion product was observed. This suggests that if intermediate A formed by a [1,1.5] Re shift and having carbene character at the remote alkynyl carbon is involved, then interaction of the neighboring Re with the carbene center greatly diminishes the carbene character as compared with that of free cyclopropyl carbenes. The tethered bis-(alkynylcarbene) complex Cp(CO)(2)Re=C(Tol)C(triple bond)CCH(2)CH(2)CH(2)C(triple bond)CC(Tol)= Re(CO)(2)Cp (13) dimerizes rapidly at 12 degrees C to give the cyclic cis-enediyne complex [Cp(CO)(2)Re](2)[eta(2),eta(2)-TolC(triple bond)CC(CH(2)CH(2)CH(2))=CC(triple bond)CTol] (15). Attempted synthesis of the 1,8-disubstituted naphthalene derivative 1,8-[Cp(CO)(2)Re=C(Tol)C(triple bond)C](2)C(10)H(6) (16), in which the alkynylcarbene units are constrained to a parallel geometry, leads to dimerization to [Cp(CO)(2)Re](2)(eta(2),eta(2)-1,2-(tolylethynyl)acenaphthylene] (17). The very rapid dimerizations of both 13 and 16 provide compelling evidence against mechanisms involving cyclopropene intermediates. A mechanism is proposed which involves rate-determining addition of the carbene center of A to the remote alkynyl carbon of a second alkynylcarbene complex to generate vinyl carbene intermediate C, and rearrangement of C to the enediyne complex by a [1,1.5] Re shift.     

A Search for pi/sigma Equilibria in Chiral Rhenium Imine Complexes of the Formula [(eta(5)-C(5)H(5))Re(NO)(PPh(3))(N(H)=C(CF(3))X)](+)TfO(-): Investigation of Electronic Effects upon the Binding Mode

Reaction of the amido complex (eta(5)-C(5)H(5))Re(NO)(PPh(3))(&Numl;H(2)) (2) and hexafluoroacetone gives the methyleneamido complex (eta(5)-C(5)H(5))Re(NO)(PPh(3))(&Numl;=C(CF(3))(2)) (3, 58%). Addition of TfOH to 3 yields the sigma-imine complex [(eta(5)-C(5)H(5))Re(NO)(PPh(3))(eta(1)-N(H)=C(CF(3))(2))](+)TfO(-) (4, 96%). Similar reactions of 2 with trifluoroacetaldehyde and then TfOH give the sigma-imine complex [(eta(5)-C(5)H(5))Re(NO)(PPh(3))(eta(1)-N(H)=C(CF(3))H)](+)TfO(-) (5, 78%) and sometimes small amounts of the corresponding pi-trifluoroacetaldehyde complex. Reaction of 5 and t-BuO(-)K(+) gives the methyleneamido complex (eta(5)-C(5)H(5))Re(NO)(PPh(3))(&Numl;=C(CF(3))H) (6, 82%). The IR and NMR properties of 3-6 are studied in detail. The (13)C NMR spectra show C=N signals (157-142 ppm) diagnostic of sigma-binding modes. No evidence is observed for pi isomers of 4 or 5. Analogous O=C(CF(3))X complexes give exclusively pi isomers, and rationales are discussed. Reactions of 3or 6 with MeOTf and heteroatom electrophiles are also described.     

Rate and mechanism of the reversible formation of cationic (eta3-allyl)-palladium complexes in the oxidative addition of allylic acetate to palladium(0) complexes ligated by diphosphanes

The oxidative addition of the allylic acetate, CH2=CH-CH2-OAc, to the palladium(o) complex [Pd0(P,P)], generated from the reaction of [Pd(dba)2, with one equivalent of P,P (P,P = dppb = 1,4-bis(diphenylphosphanyl)butane, and P,P = dppf = 1,1'-bis(diphenylphosphanyl)ferrocene), gives a cationic (eta3-allyl)palladium(II) complex, [(eta3-C3H5)Pd(P,P)+]. with AcO as the counter anion. This reaction is reversible and proceeds through two successive equilibria. The overall equilibrium constants have been determined in DMF. Compared with PPh3, the overall equilibrium lies more in favor of the cationic (eta3-allyl)palladium(II) complex when bidentate P,P ligands are considered in the order: dppb > dppf > PPh3. The reaction proceeds via a neutral intermediate complex [(eta2-CH=CH-CHCH2-OAc)Pd0(P,P)], which has been kinetically detected. The rate constants of the successive steps have been determined in DMF by UV spectroscopy and conductivity measurements. The overall complexation step of the Pd0 by the allylic acetate C=C bond is faster than the oxidative addition/ionization step which gives the cationic (eta3-allyl)palladium(II) complex.     

Synthesis and structure of W(eta(2)-mp)(2)(CO)(3) (mp = monoanion of 2-mercaptopyridine) and its reactions with 2,2'-pyridine disulfide and/or NO to yield W(eta(2)-mp)(4), W(eta(2)-mp)(2)(NO)(2), and W(eta(2)-mp)(3)(NO)

Oxidative addition of the sulfur-sulfur bond of 2,2'-pyridine disulfide (C(5)H(4)NS-SC(5)H(4)N) with L(3)W(CO)(3) [L = pyridine, (1)/(3)CHPT; CHPT = cycloheptatriene] in methylene chloride solution yields the seven-coordinate W(II) thiolate complex W(eta(2)-mp)(2)(CO)(3) (mp = monoanion of 2-mercaptopyridine). This complex undergoes slow further oxidative addition with additional pyridine disulfide, yielding W(eta(2)- mp)(4). Reaction of W(eta(2)-mp)(2)(CO)(3) with NO results in quantitative formation of the six-coordinate W(0) complex W(eta(2)-mp)(2)(NO)(2). Reaction of W(eta(2)-mp)(2)(CO)(3) with NO in the presence of added pyridine disulfide yields the seven-coordinate W(II) nitrosyl complex W(eta(2)-mp)(3)(NO) as well as W(eta(2)-mp)(2)(NO)(2) and trace amounts of W(eta(2)-mp)(4). The complex W(eta(2)-mp)(3)(NO) is formed during the course of the reaction and not by reaction of W(eta(2)-mp)(4) or W(eta(2)-mp)(2)(NO)(2) with NO under these conditions. The crystal structures of W(eta(2)- mp)(2)(CO)(3), W(eta(2)-mp)(2)(NO)(2), and W(eta(2)-mp)(3)(NO) are reported.     

Intramolecular metathesis of a vinyl group with vinylidene C=C double bond in Ru complexes

The cationic complex {[Ru]=C=CHCPh2CH2CH=CH2}BF4 (3a, [Ru] = (eta5-C5H5)(PPh3)2Ru) in solution transforms to {[Ru]=C=CHCH2CPh2CH=CH2}BF4 (4a) via a new metathesis process of the terminal vinyl group with the C=C of the vinylidene group which is confirmed by 13C labeling studies. This transformation is irreversible as revealed by deuteration and decomplexation studies. The cationic complex {[Ru]=C=CHCPh2CH2CMe=CH2}BF4 (3b) undergoes a cyclization process yielding 6b containing a eta2-cyclic allene ligand which is fully characterized by single-crystal X-ray diffraction analysis. Analogous complexes 4a' and 6b' ([Ru] = (eta5-C5H5)(dppe)Ru) containing dppe ligands were similarly obtained from protonation of the corresponding acetylide complexes via formation of vinylidene intermediate. Protonation of the acetylide complex containing a terminal alkynyl group [Ru]-CCCPh2CH2CCH (2c) generates the vinylidene complex {[Ru]=C=CHCPh2CH2CCH}BF4 (3c) which again undergoes an irreversible transformation to give {[Ru]=C=CHCH2CPh2CCH}BF4 (4c) possibly via a pi-coordinated alkynyl complex followed by hydrogen and metal migration. No similar transformation is observed for the analogous dppe complex 3c'. With an extra methylene group, complex {[Ru]=C=CHCPh2CH2CH2CH=CH2}BF4 (3d) and complex {[Ru]=C=CHCPh2CH2Ph}BF4 (3e) are stable. The presence of a gem-diphenylmethylene moiety at the vinylidene ligand with the appropriate terminal vinyl or alkynyl group along with the correct steric environment implements such a novel reactivity in the ruthenium vinylidene complexes.     

Two metal centers bridging two C60 cages as a wide passage for efficient interfullerene electronic interaction

The reaction of Ir4(CO)8(PMe3)4 with excess C60 in refluxing 1,2-dichlorobenzene, followed by treatment by CNR (R = CH2C6H5) at 70 degrees C, affords a fullerene-metal sandwich complex Ir4(CO)3(mu4-CH)(PMe3)2(mu-PMe2)(CNR)(mu-eta2,eta2-C60)(mu4-eta1,eta1,eta2,eta2-C60) (1), which exhibits an interesting structural feature of two metal atoms bridging the two C60 centers as well as the first example of a mu4-eta1,eta1,eta2,eta2-C60 bonding mode. Compound 1 has been characterized by NMR spectroscopy, elemental analysis, and X-ray diffraction study. A cyclic voltammetry study reveals strong electronic communication between the two C60 centers in 1, which is due to the presence of a wide channel of two metal centers between the two C60 cages for efficient electronic interaction.     

Zirconium bis(indenyl) sandwich complexes with an unprecedented indenyl coordination mode and their role in the reactivity of the parent bent-metallocenes: a detailed DFT mechanistic study

The mechanisms of three closely related reactions were studied in detail by means of DFT/B3 LYP calculations with a VDZP basis set. Those reactions correspond to 1) the reductive elimination of methane from [Zr(eta5-Ind)2(CH3)(H)] (Ind=C9H7-, indenyl), 2) the formation of the THF adduct, [Zr(eta5-Ind)(eta6-Ind)(thf)] and 3) the interconversion between the two indenyl ligands in the Zr sandwich complex, [Zr(eta5-Ind)(eta9-Ind)], which forms the link between the two former reactions. An analysis of the electronic structure of this species indicates a saturated 18-electron complex. A full understanding of the indenyl interchange process required the characterisation of several isomers of the Zr-bis(indenyl) species, corresponding to different spin states (S=0 and S=1), different coordination modes of the two indenyl ligands (eta5/eta9, eta5/eta5 and eta6/eta9), and three conformations for each isomer (syn, anti, and gauche). The fluxionality observed was found to occur in a mechanism involving bis(eta5-Ind) intermediates, and the calculated activation energy (11-14 kcal mol(-1)) compares very well with the experimental values. Two alternative mechanisms were explored for the reductive elimination of methane from the methyl/hydride complex. In the more favourable one, the initial complex, [Zr(eta5-Ind)2(CH3)(H)], yields [Zr(eta5-Ind)2] and methane in one crucial step, followed by a smooth transition of the Zr intermediate to the more stable eta5/eta9-species. The overall activation energy calculated (Ea=29 kcal mol(-1)) compares well with experimental values for related species. The formation of the THF adduct follows a one step mechanism from the appropriate conformer of the [Zr(eta5-Ind)(eta9-Ind)] complex, producing easily (Ea=6.5 kcal mol(-1)) the known product, [Zr(eta5-Ind)(eta6-Ind)(thf)], a species previously characterised by X-ray crystallography. This complex was found to be trapped in a potential well that prevents it from evolving to the 3.4 kcal mol(-1) more stable isomer, [Zr(eta5-Ind)2(thf)], with both indenyl ligands in a eta5-coordination mode and a spin-triplet state (S=1).     

Chelate and pincer carbene complexes of rhodium and platinum derived from hexaphenylcarbodiphosphorane, Ph3P=C=PPh3

The reaction of [(cod)RhCl]2 with Ph3P=C=PPh3 (1) gave the bidentate Rh(I) carbene complex, (cod)Rh[eta2-C{P(C6H4)Ph2}{PPh3}] (2), in which one of the Ph groups in 1 underwent orthometalation to form the chelate. Displacement of cod by 2 equiv of PMe3 transformed 2, via a second orthometalation event, into the Rh(III) C,C,C pincer carbene complex, HRh(PMe3)2[eta3-C{P(C6H4)Ph2}2] (3). The reaction of [Me2Pt(SMe2)]2 with 1 led directly to the analogous C,C,C pincer carbene complex of Pt(II), (Me2S)Pt[eta3-C{P(C6H4)Ph2}2] (4). DFT calculations on a model form of 3 suggest a net single sigma-bonding interaction between Rh and an sp2-hybridized carbene center, with a HOMO that is predominantly carbene pz in character.     

eta1:eta2-Alkynyl-bridged W-Si complexes: formation, structure, and reaction with acetone

Reactions of (eta5-C5Me4R)(CO)2(MeCN)WMe (R = Me, Et) with HPh2SiCCtBu gave the novel alkynyl-bridged W-Si complexes, (eta5-C5Me4R)(CO)2W(mu-eta1:eta2-CCtBu)(SiPh2) (R = Me, Et), whose alkynyl ligands bridge the tungsten and silicon atoms in an eta1:eta2-coordination mode. The structures of these complexes were fully characterized, including X-ray crystallography. Treatment of (eta5-C5Me5)(CO)2W(mu-eta1:eta2-CCtBu)(SiPh2) with acetone resulted in acetone insertion into the silicon-alkynyl linkage followed by intramolecular C-H activation of the tBu group to give the chelate-type alkyl-alkene complex, (eta5-C5Me5)(CO)2W(eta1:eta2-CH2CMe2C=CHSiPh2OCMe2).     

Synthesis and reactions of terminal osmium and ruthenium complexed phosphinidenes [(eta6-Ar)(L)Md=PMes*

Novel, very stable ruthenium and osmium containing terminal phosphinidene complexes [(eta(6)-Ar)(L)M=Mes*] (Ar=benzene, p-cymene; L=PR(3), CO, and RNC) have been prepared by dehydrohalogenation of novel [(eta(6)-Ar)MX(2)(PH(2)Mes*)] complexes in the presence of a stabilizing ligand. Xray crystal structures are reported for [(eta(6)-C(6)H(6))(PPh(3))Rud=PMes*] (9) and [(eta(6)-pCy)(PPh(3))Os=PMes*] (4). Dehydrohalogenation in the absence of a stabilizing ligand resulted in the new P-spiroannulated Ru(2)P(2)-ring structure 16. Dehydrohalogenation in the presence of but-2-yne gave a novel phosphaallyl complex [(eta(6)-Ar)Ru(eta(3)-R(2)PC(Me)CHMe)] 26, for which an X-ray crystal structure is reported. The mechanism by which 16 and 26 are obtained is presumed to involve the intermediate formation of the 16-electron (eta(6)-benzene)Rud=PMes* phosphinidene complex.     

A favorable case where an experimental electron density analysis offers a lead for understanding a specific fluxional process observed in solution

A topological analysis of the electron density in the ketene complex (eta(5)-MeC(5)H(4))(CO)(2)Mn[eta(2)-O=C=C((mu-eta(2)-CCPh)Co(2)(CO)(6))Ph] indicates a predisposition for the carbene component of the ketene ligand to bind the neighboring C atom of the adjacent CO ligand.     

Thermal activation of hydrocarbon C-H bonds initiated by a tungsten allyl complex

Gentle thermolysis of the allyl complex, CpW(NO)(CH(2)CMe(3))(eta(3)-H(2)CCHCMe(2)) (1), at 50 degrees C in neat hydrocarbon solutions results in the loss of neopentane and the generation of transient intermediates that subsequently activate solvent C-H bonds. Thus, thermal reactions of 1 with tetramethylsilane, mesitylene, and benzene effect single C-H activations and lead to the exclusive formation of CpW(NO)(CH(2)SiMe(3))(eta(3)-H(2)CCHCMe(2)) (2), CpW(NO)(CH(2)C(6)H(3)-3,5-Me(2))(eta(3)-H(2)CCHCMe(2)) (3), and CpW(NO)(C(6)H(5))(eta(3)-H(2)CCHCMe(2)) (4), respectively. The products of reactions of 1 with other methyl-substituted arenes indicate an inherent preference of the system for the activation of stronger arene sp(2) C-H bonds. For example, C-H bond activation of p-xylene leads to the formation of CpW(NO)(CH(2)C(6)H(4)-4-Me)(eta(3)-H(2)CCHCMe(2)) (5) (26%) and CpW(NO)(C(6)H(3)-2,5-Me(2))(eta(3)-H(2)CCHCMe(2)) (6) (74%). Mechanistic and labeling studies indicate that the transient C-H-activating intermediates are the allene complex, CpW(NO)(eta(2)-H(2)C=C=CMe(2)) (A), and the eta(2)-diene complex, CpW(NO)(eta(2)-H(2)C=CHC(Me)=CH(2)) (B). Intermediates A and B react with cyclohexene to form CpW(NO)(eta(3)-CH(2)C(2-cyclohexenyl)CMe(2))(H) (18) and CpW(NO)(eta(3)-CH(2)CHC)(Me)CH(2)C(beta)H(C(4)H(8))C(alpha)H (19), respectively, and intermediate A can be isolated as its PMe(3) adduct, CpW(NO)(PMe(3))(eta(2)-H(2)C=C=CMe(2)) (20). Interestingly, thermal reaction of 1 with 2,3-dimethylbut-2-ene results in the formation of a species that undergoes eta(3) --> eta(1) isomerization of the dimethylallyl ligand following the initial C-H bond-activating step to yield CpW(NO)(eta(3)-CMe(2)CMeCH(2))(eta(1)-CH(2)CHCMe(2)) (21). Thermolyses of 1 in alkane solvents afford allyl hydride complexes resulting from three successive C-H bond-activation reactions. For instance, 1 in cyclohexane converts to CpW(NO)(eta(3)-C(6)H(9))(H) (22) with dimethylpropylcyclohexane being formed as a byproduct, and in methylcyclohexane it forms the two isomeric complexes, CpW(NO)(eta(3)-C(7)H(11))(H) (23a,b). All new complexes have been characterized by conventional spectroscopic methods, and the solid-state molecular structures of 2, 3, 4, 18, 19, 20, and 21 have been established by X-ray crystallographic analyses.     

Cobalt-complexed conjugated diyne salts: a family of rigid masked dielectrophiles. Syntheses, structures, and double nucleophilic substitutions

A family of dicationic diyne salts of the general formula [(Co2(CO)6)2-mu,eta2,eta2-(Nu-CH2C(triple bond)C-C(triple bond)CCH2-Nu)][BF4]2 [Nu = SMe2 (3); Nu = NC6H7, 3-picoline, (5); Nu = NC9H7, quinoline (7)] were prepared and fully characterized. Three X-ray molecular structures of 3, 5, and the neutral starting material 2,4-hexadiyne-1,6-diol complex [(Co2(CO)6)2-mu,eta2,eta2-(HO-CH2C(triple bond)C-C(triple bond)CCH2-OH)] (1) are presented. Complex 1 crystallizes in the triclinic space group P1 with a = 14.722(2) A, b = 14.571(3) A, c = 14.722(2) A, alpha = 105.17(1) degrees, beta = 113.30(1) degrees, gamma = 99.20(1) degrees, and Z = 4. Complex 3 crystallizes in the monoclinic space group P2(1)/n with a = 12.758(3) A, b = 13.360(3) A, c = 20.494(3) A, beta = 91.44(1) degrees, and Z = 4, and compound 5 also crystallizes in the monoclinic space group P2(1)/n with a = 9.426(2) A, b = 21.739(5) A, c = 18.704(3) A, beta = 94.86(1) degrees, and Z = 4. The X-ray structures provide us with valuable information on the arrangement of the Co2-alkyne units, which have a cis geometry and are in sharp contrast to that observed generally for diyne-tetracobalt compounds. Complex [(Co2(CO)6)2-mu,eta2,eta2-(Me2S-CH2C(triple bond)C-C(triple bond)CCH2-SMe2)][BF4]2 (3) reacts with N-, S-, and P-centered nucleophiles and affords the related substituted complexes in high yields. The stability and reactivity of the disulfonium diyne complex 3 toward nucleophiles are compared to those of the analogous disulfonium-yne complex [(Co2(CO)6)2-mu,eta2,eta2-(Me2S-CH2-C(triple bond)C-CH2-SMe2)][BF4]2 (4).     

Mechanism of reversible alkyne coupling at zirconocene: ancillary ligand effects

The mechanism of reversible alkyne coupling at zirconium was investigated by examination of the kinetics of zirconacyclopentadiene cleavage to produce free alkynes. The zirconacyclopentadiene rings studied possess trimethylsilyl substituents in the alpha-positions, and the ancillary Cp2, Me2C(eta(5)-C5H4)2, and CpCp* (Cp* = eta(5)-C5Me5) bis(cyclopentadienyl) ligand sets were employed. Fragmentation of the zirconacyclopentadiene ring in Cp2Zr[2,5-(Me3Si)2-3,4-Ph2C4] with PMe3, to produce Cp2Zr(eta(2)-PhC[triple bond]CSiMe3)(PMe3) and free PhC[triple bond]CSiMe3, is first-order in initial zirconacycle concentration and zero-order in incoming phosphine (k(obs) = 1.4(2) x 10(-5) s(-1) at 22 degrees C), and the activation parameters determined by an Eyring analysis (DeltaH(double dagger) = 28(2) kcal mol(-1) and DeltaS(double dagger) = 14(4) eu) are consistent with a dissociative mechanism. The analogous reaction of the ansa-bridged complex Me2C(eta(5)-C5H4)2Zr[2,5-(Me3Si)2-3,4-Ph2C4] is 100 times faster than that for the corresponding Cp2 complex, while the corresponding CpCp* complex reacts 20 times slower than the Cp2 derivative. These rates appear to be largely influenced by the steric properties of the ancillary ligands.