Novel synthesis of high-surface-area ordered mesoporous TiO2 with anatase framework for photocatalytic applications

Ordered mesoporous TiO₂ materials with an anatase frameworks have been synthesized by using a cationic surfactant cetyltrimethylammonium bromide (C₁₆TMABr) as a structure-directing agent and soluble peroxytitanates as Ti precursor through a self-assembly between the positive charged surfactant S⁺ and the negatively charged inorganic framework I^? (S⁺I^? type). The low-angle X-ray diffraction (XRD) pattern of the as-prepared mesoporous TiO₂ materials indicates a hexagonal mesostructure. XRD and transmission electron microscopy results and nitrogen adsorption–desorption isotherms measurements indicate that the calcined mesoporous TiO₂ possesses an anatase crystalline framework having a maximum pore size of 6.9 nm and a maximum Brunauer–Emmett–Teller specific surface area of 284 m² g^?1. This ordered mesoporous anatase TiO₂ also demonstrates a high photocatalytic activity for degradation of methylene blue under ultraviolet irradiation.     

Preparation of TiO2 nanocrystallites by hydrolyzing with gaseous water and their photocatalytic activity

TiO₂ nanocrystallites were prepared from precursors tetra-n-butyl titanate (Ti(OC₄H₉)₄) and titanium tetrachloride (TiCl₄). The precursors were hydrolyzed by gaseous water in autoclave, and then calcined at predetermined testing temperatures. The samples were characterized by X-ray diffraction (XRD), thermogravimetry–differential thermal analysis (TG–DTA), field emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectra (FT-IR), and UV–vis diffuse reflectance spectra (DRS). The photocatalytic activities of the samples were evaluated by the photobleaching of methylene blue (MB) in aqueous solution and the photocatalytic oxidation of propylene in gas phase at ambient temperature. The results showed that the anatase phase nanocrystalline TiO₂ could be obtained at relatively low temperatures (for precursor Ti(OC₄H₉)₄ at 110 °C and for TiCl₄ at 140 °C, respectively), and that the as prepared samples exhibited high photocatalytic activities to photobleach MB in aqueous solution. As the calcination temperatures increasing, the decolor ratio of MB increased and reached the maximum value of nearly 100% at 600 °C, and then decreased. The photobleaching of MB by all samples followed the pseudo-first-order kinetics with respect to MB concentration. The photodecomposition amount of propylene by TiO₂ nanocrystallites calcined at 600 °C from precursor of Ti(OC₄H₉)₄ is 21.6%, which is approaching to that by Degussa P25 TiO₂ (24.9%).     

Photocatalytic activity of TiO2 nanotube layers loaded with Ag and Au nanoparticles

Ag and Au nanoparticles were found to significantly enhance the photocatalytic activity of self-organized TiO₂ nanotubular structures. The catalyst systems are demonstrated to be highly efficient for the UV-light induced photocatalytic decomposition of a model organic pollutant – Acid Orange 7. The metallic nanoparticles with a diameter of ∼10 ± 2 nm (Ag) and ∼28 ± 3 nm (Au) were attached to a nanotubular TiO₂ layer that consists of individual tubes of ∼100 nm of diameter, ∼2 μm in length and approx. 15 nm of wall thickness. Both metal particle catalyst systems enhance the photocatalytic decomposition significantly more on the nanotubes support than placed on a compact TiO₂ surface.     

Photocatalytic activity of nitrogen and copper doped TiO2 nanoparticles prepared by microwave-assisted sol-gel process

Cu and N-doped TiO₂ photocatalysts were synthesized from titanium (IV) isopropoxide via a microwave-assisted sol-gel method. The synthesized materials were characterized by X-ray diffraction, UV-vis diffuse reflectance, photoluminescence (PL) spectroscopy, SEM, TEM, FT-IR, Raman spectroscopy, photocurrent measurement technique, and nitrogen adsorption–desorption isotherms. Raman spectra and XRD showed an anatase phase structure. The SEM and TEM images revealed the formation of an almost spheroid mono disperse TiO₂ with particle sizes in the range of 9-17 nm. Analysis of N₂ isotherm measurements showed that all investigated TiO₂ samples have mesoporous structures with high surface areas. The optical absorption edge for the doped TiO₂ was significantly shifted to the visible light region. The photocurrent and photocatalytic activity of pure and doped TiO₂ were evaluated with the degradation of methyl orange (MO) and methylene blue (MB) solution under both UV and visible light illumination. The doped TiO₂ nanoparticles exhibit higher catalytic activity under each of visible light and UV irradiation in contrast to pure TiO₂. The photocatalytic activity and photocurrent ability of TiO₂ have been enhanced by doping of the titania in the following order: (Cu, N) - codoped TiO₂ > N-doped TiO₂ > Cu-doped TiO₂ > TiO₂. COD result for (Cu, N)-codoped TiO₂ reveals ∼92% mineralization of the MO dye on six h of visible light irradiation.     

Synthesis of titanium dioxide nanocrystalline layers using hexaprismatic shaped μ-oxo Ti(IV) alkoxo carboxylates as precursors

The reaction between Ti(OR)₄ (R = ⁿBu, ⁱBu, SiMe₃) and 2,2-dimethylpropionic acid lead to the formation of hexanuclear μ-oxo titanium(IV) alkoxo carboxylato complexes of the general formula [Ti₆O₆(OR)₆(OOC^tBu)₆]. Thermal decomposition pathways of these compounds and their potential application in the preparation of TiO₂ nanolayers using chemical vapor deposition (CVD) methods have been discussed. The type of the alkoxide ligands causes differences in the thermolysis pathway, and the type of the volatile decomposition products. Among the examined complexes only [Ti₆O₆(OR)₆(OOC^tBu)₆] (R = ⁱBu, SiMe₃) show promising properties for their application as precursors in CVD methods. The TiO₂ films were grown in a wide range of substrate temperatures (653–873 °K), under the total reactor pressure 2.0–3.0 mbar. The crystallinity and the composition of layers were analyzed by X-ray diffraction (XRD). It was found that the formation of TiO₂ amorphous, anatase or rutile films depends on the deposition temperature and gas phase composition.     

Photocatalytic decomposition of 4-chlorophenol over an efficient N-doped TiO2 under sunlight irradiation

Using a new nitrogen precursor of a mixture of ammonia and hydrazine hydrate, N-doped TiO₂ photocatalyst with a high efficiency under visible light was synthesized by a precipitation method. The analysis of X-ray photoelectron spectroscopy (XPS) suggested that the doping concentration of nitrogen was 0.45 at%, while it was 0.21 at% or 0.24 at% using single ammonia or hydrazine hydrate as nitrogen precursor. The patterns of the electron paramagnetic resonance spectroscopy (EPR) indicated that the paramagnetic species of NO₂^2?, NO and Ti³⁺ existed as the proposed active species. The ultraviolet–visible (UV–vis) spectra revealed that the band-gap of the N-doped TiO₂ was 3.12 eV, which was slightly lower than 3.15 eV of pure TiO₂. The N-doped TiO₂ showed higher efficiency under both ultraviolet (UV) and visible light irradiations. Moreover, the degradation grade of 4-chlorophenol (4-CP) using the as-synthesized N-doped TiO₂ under sunlight irradiation for 6 h was 82.0%, which was higher than 66.2% of the pure TiO₂, 60.1% or 65.2% of the N-doped TiO₂ using single ammonia or hydrazine hydrate as precursor. Density functional theory (DFT) calculations were performed to investigate the visible light response of the N-doped TiO₂. Our study demonstrated that the visible activities vary well with the concentrations of NO₂^2? species incorporated by N–TiO₂ series photocatalysts and the higher activity of the as-prepared N-doped TiO₂ was attributed to the enhancement of the concentration of NO₂^2? species.     

Studies of dielectric characteristics of BaBi2Nb2O9 ferroelectrics prepared by chemical precursor decomposition method

BaBiNb₂O₉ (BBN) powders in the nanometer range were prepared by chemical precursor decomposition method (CPD). TG–DTA showed that precursor sample got freed from organic contaminants at 575 °C. XRD showed that a single phase with the layered perovskite structure of BBN was formed after calcining at 600 °C. No intermediate phase was found during heat treatment at and above 600 °C. The crystallite size (D) and the effective strain (η) were found to be 26 nm and 0.000867, respectively, while the particle size obtained from TEM was 28 ± 2 nm. SEM revealed that the average grain size after sintering at 900 °C for 4 h was ∼1.67 μm. A relative density of ∼93% was obtained using a two-step sintering process at moderate pressure. Dielectric and ferroelectric properties were investigated in the temperature range 50–500 °C and frequencies from 1 kHz to 5 MHz. Strong dispersion of the complex relative dielectric constant was observed including typical relaxor features such as shift of permittivity maximum with frequency and broadening of the peak maximum. The high dielectric constant of 545 measured at 100 kHz and other properties of BBN ceramics were compared to that of BBN prepared by other conventional methods and found to be superior.     

Atomic layer deposition of TiO2 nanotubes and its improved electrostatic capacitance

Titanium dioxide (TiO₂) nanotubes are fabricated into anodic aluminum oxide (AAO) membrane via atomic layer deposition (ALD). For the ALD of TiO₂, gaseous precursors, titanium (IV) isopropoxide and water are sequentially applied and chemically reacted with each other. A thickness of nanotubes is precisely controlled by the applied cycle numbers of ALD and the morphology of nanostructures is investigated by SEM and TEM. The amorphous property of TiO₂ nanostructures is revealed by XRD and the composition of nanotubes is measured by TEM–EDX. The impurity contents and binding structure of the nanostructures are analyzed by XPS. The electrostatic capacitance of TiO₂ nanotubes into AAO is 480 μF/cm² and it is about 3 times higher compared with AAO membrane (172 μF/cm²).     

The improved photocatalytic properties of P-type NiO loaded porous TiO2 sheets prepared via freeze tape-casting

For the interest of the practical application, porous TiO₂ sheets were prepared by a novel freeze tape-casting method, in order to improve the photocatalytic activities of these TiO₂ sheets, p-type NiO was loaded by chemical solution deposition. The samples were characterized by a series of physical means, including XRD, SEM, EDS, XPS, ICP-OES, and UV-vis spectroscopy. The photocatalytic activities of the samples were evaluated by the degradation of methyl orange solution. The results showed that the photocatalytic activity of the TiO₂ sheet was greatly enhanced by the NiO loading, and the photocatalytic efficiency increased with increasing the NiO loading, the extraordinary performance for the NiO-loaded sample with 0.1 M precursor dipped was related to its unique morphology. The sample annealed at 600 °C showed the better photocatalytic activity than the sample annealed at 400 °C and 800 °C. The improvement of the photocatalytic activity was attributed to the formation of p–n junctures at the interface of the NiO/TiO₂, which facilitates the photoinduced electron/hole pairs' separation by the inner electric field, thus leading to the higher photocatalytic activities for the NiO-loaded TiO₂ sheets.     

Tio2@Sn core–shell nanotubes for fast and high density Li-ion storage material

TiO₂@Sn core–shell nanotube material prepared by thermal decomposition of SnCl₄ on TiO₂ nanotubes at 300 °C has been demonstrated superior Li-ion storage capability of 176 mA h/g even at high current rate of 4000 mA/g (charge and discharge of all TiO₂ within 5 min) in spite of using low carbon content (5 wt%). This value corresponds to volumetric energy densities of 317 mA h/cm³, and its value was 3.5-fold larger than that of the bare TiO₂ nanotubes.     

Synthesis of nanosized rubidium ferrite by thermolysis of ferricarboxylate precursors and combustion method

Nanosized pure rubidium ferrites have been successfully prepared by thermal decomposition of rubidium hexa(carboxylato)ferrate(III) precursors, Rb₃[Fe(L)₆]·xH₂O (L = formate, acetate, propionate, butyrate), in flowing air atmosphere from ambient temperature to 1000 °C. Various physico-chemical techniques i.e. simultaneous TG–DTG–DTA, XRD, Transmission Electron Microscope (TEM), IR and Mössbauer spectroscopy etc. have been employed to characterize the intermediates and end products. After dehydration, the anhydrous precursors undergo exothermic decomposition to yield various intermediates i.e. rubidium carbonate/acetate/propionate/butyrate and α-Fe₂O₃. A subsequent decomposition of these intermediates, followed by solid state reaction, lead to the formation of nanosized rubidium ferrite (RbFeO₂). The same nano-ferrite has also been prepared by the combustion method at a comparatively lower temperature and in less time than that of the conventional ceramic method (>1200 °C).     

Effects of electron beam irradiation on the photoelectrochemical properties of TiO2 film for DSSCs

TiO₂ has been widely utilized for various industrial applications such as photochemical cells, photocatalysts, and electrochromic devices. The crystallinity and morphology of TiO₂ films play a significant role in determining the overall efficiency of dye-sensitized solar cells (DSSCs). In this study, the preparation of nanostructured TiO₂ films by electron beam irradiation and their characterization were investigated for the application of DSSCs. TiO₂ films were exposed to 20–100 kGy of electron beam irradiation using 1.14 MeV energy acceleration with a 7.46 mA beam current and 10 kGy/pass dose rates. These samples were characterized using X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), and X-ray photoelectron spectroscopy (XPS) analysis. After irradiation, each TiO₂ film was tested as a DSSC. At low doses of electron beam irradiation (20 kGy), the energy conversion efficiency of the film was approximately 4.0% under illumination of simulated sunlight with AM 1.5 G (100 mW/cm²). We found that electron beam irradiation resulted in surface modification of the TiO₂ films, which could explain the observed increase in the conversion efficiency in irradiated versus non-irradiated films.     

A novel approach for determining total titanium from titanium dioxide nanoparticles suspended in water and biosolids by digestion with ammonium persulfate

Titanium dioxide (i.e. TiO₂) in nano-form is a constituent of many nanomaterials that are used in sunscreens, cosmetics, industrial products and in biomedical applications. Quantification of TiO₂ nanoparticles in various matrixes is a topic of great interest for researchers studying the potential health and environmental impacts of nanoparticles. However, analysis of TiO₂ as Ti⁴⁺ is difficult because current digestion techniques require use of strong acids that may be a health and safety risk in the laboratory. To overcome this problem, we developed a new method to digest TiO₂ nanoparticles using ammonium persulfate as a fusing reagent. The digestion technique requires short times to completion and optimally requires only 1 g of fusing reagent. The fusion method showed >95% recovery of Ti⁴⁺ from 6 μg mL^?1 aqueous suspensions prepared from 10 μg mL^?1 suspension of different forms of TiO_2, including anatase, rutile and mixed nanosized crystals, and amorphous particles. These recoveries were greater than open hot-plate digestion with a tri-acid solution and comparable to microwave digestion with a tri-acid solution. Cations and anions commonly found in natural waters showed no significant interferences when added to samples in amounts of 10 ng to 110 mg, which is a much broader range of these ions than expected in environmental samples. Using ICP-MS for analysis, the method detection limit (MDL) was determined to be 0.06 ng mL^?1, and the limit of quantification (LOQ) was 0.20 ng mL^?1. Analysis of samples of untreated and treated wastewater and biosolids collected from wastewater treatment plants yielded concentrations of TiO₂ of 1.8 and 1.6 ng mL^?1 for the wastewater samples, respectively, and 317.4 ng mg^?1 dry weights for the biosolids. The reactions between persulfate ions and TiO₂ were evaluated using stoichiometric methods and FTIR and XRD analysis. A formula for the fusing reaction is proposed that involves the formation of sulfate radicals.     

Synthesis and characterization of ZnO nanoparticles by thermal decomposition of a curcumin zinc complex

ZnO nanoparticles were generated by thermal decomposition of a binuclear zinc (II) curcumin complex as single source precursor. Thermal behavior of the precursor showed a considerable weight loss at about 374 °C by an exothermic reaction with a maximum weight loss rate of 14%/min. Complete decomposition of precursor was observed within 49 min with a heating rate of 10 °C/min. Synthesized nanoparticles have been characterized by X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy and selected area electron diffraction microscopy. Results revealed monodispersed hexagonal zincite structure with an average size of 117 ± 4 nm.     

Synthesis of ZnS nanoparticles from pyridine adducts of zinc(II) dithiocarbamates

Zn(thqdtc)₂, Zn(thqdtc)₂(py) and Zn(thiqdtc)₂(py) (where thqdtc = 1,2,3,4-tetrahydroquinolinecarbodithioate, thiqdtc = 1,2,3,4-tetrahydroisoquinolinecarbodithioate and py = pyridine) have been used as single source precursors for the synthesis of ZnS nanoparticles. The formation of ZnS nanoparticles was achieved by thermal decomposition of the complex under heating in presence of triethylenetetraamine. Transmission electron microscopy, energy dispersive X-ray analysis (EDAX) and powder X-ray diffraction studies were carried out to study the structure and morphology of the nanoparticles. The optical properties of the ZnS nanoparticles were studied by UV–visible and fluorescence emission spectral studies. UV–visible absorption spectral studies indicate a blue shift in the absorption maxima due to the quantum size effect. A single crystal X-ray analysis was carried out for a precursor [Zn(thqdtc)₂].     

Visible LED light photoelectrochemical sensor for detection of L-Dopa based on oxygen reduction on TiO2 sensitized with iron phthalocyanine

The present work describes the development of a new strategy to photoelectrochemical detection of L-Dopa at low potential based on oxygen reduction on TiO₂ sensitized with iron phthalocyanine (FePc/TiO₂). The FePc/TiO₂ composite shows a photocurrent 10-fold higher than that of pure TiO₂ nanoparticles and it was 4-fold higher than that of FePc exploiting visible light. The band gaps of pure TiO₂ nanoparticles, FePc and FePc/TiO₂, calculated according to the Kubelka–Munk equation, were 3.22 eV, 3.11 eV and 2.82 eV, respectively. The FePc/TiO₂ composite showed a low charge transfer resistance in comparison to the photoelectrode modified with FePc or TiO₂. Under optimized conditions, the photoelectrochemical sensor shows a linear response range from 20 up to 190 μmol L^− 1 with a sensitivity of 31.8 μA L mmol^− 1 and limit of detection of 1.5 μmol L^− 1 for the detection of L-Dopa.     

Comprehensive evolved gas analysis (EGA) of amorphous precursors for S-doped titania by in situ TG–FTIR and TG/DTA–MS in air: Part 2. Precursor from thiourea and titanium(IV)-n-butoxide

Thermal decomposition of an amorphous precursor for sulfur-doped titania (S:TiO₂) nanopowders, prepared by controlled sol–gel hydrolysis-condensation of titanium(IV) tetrabutoxide and thiourea in aqueous butanol, has been studied in situ up to 850 °C in flowing air by simultaneous thermogravimetric and differential thermal analysis coupled online with quadrupole mass spectrometer (TG/DTA–MS) and FTIR spectrometric gas cell (TG–FTIR) for analysis of gases and their evolution dynamics in order to explore and simulate thermal annealing processes of fabrication techniques aimed S:TiO₂ photocatalysts with photocatalytic activities under visible light.The studied S-doped precursor's decomposition course remembers to that of non-doped xerogel from Ti(IV)-n-butoxide, which seems to retard a considerable amount of organics in the solid phase even at high temperature, probably in polymeric forms, proven by evolution of CO₂ in several temperature regions of decomposition stages. The incorporation form of thiourea in the original xerogel seems to be chemically bounded, resulting lower decomposition temperature than that of pure thiourea, and producing evolution of carbonyl sulfide (COS) already between 120 and 190 °C. Nevertheless, evolution of SO₂, and that of CO₂ is also observed above 500 °C by both EGA detection methods. The latter observation implies that the blackish grey samples obtained even at 750 °C might be simultaneously S- and C-doped ones.     

Doping level effect on visible-light irradiation W-doped TiO2–anatase photocatalysts for Congo red photodegradation

A series of W-modified TiO₂ (W–TiO₂) photocatalysts were synthesized by a simple sol–gel method. The new photocatalysts were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV–vis-diffuse reflectance spectroscopy (DRS), and Brunauer, Emmett and Teller (BET) surface area analyzer. The photoactivity of the W–TiO₂ photocatalysts was evaluated by the photocatalytic oxidation of Congo red (CR) dye. It was found that the average size of the prepared photocatalysts is 10 nm. Moreover, they have high surface areas (∼ 216 m² g⁻¹) and their light-absorption extends to the visible region compared to pure TiO₂. The effects of W-loading and of the calcination temperature of the prepared photocatalysts on their photocatalytic activity were also studied. The obtained results show that the W_0.5–TiO₂ photocatalyst calcined at 350 °C is much highly photoactive than non-doped or highly doped TiO₂. The enhanced photocatalytic activity of the weakly doped TiO₂ may be attributed to the increase in the charge separation efficiency and the presence of surface acidity on the W_0.5–TiO₂ photocatalyst.     

F–B-codoping of anodized TiO2 nanotubes using chemical vapor deposition

Chemical vapor deposition (CVD) was firstly used to simultaneously codope fluorine and boron into TiO₂ nanotubes anodized Ti in C₂H₂O₄ · 2H₂O + NH₄F electrolyte. F–B-codoping was successfully carried out by annealing the anodized TiO₂ nanotubes through CVD, as evidenced from XPS analysis. SEM images showed that the higher the annealing temperature, the greater structure damage of F–B-codoped sample. XRD results confirmed that annealing temperature had an influence on the phase structure and boron and fluorine impurities could retard anatase–rutile phase transition. F–B-codoped samples displayed remarkably strong absorption in both UV and visible range. Under visible-light irradiation, F–B-codoped samples showed the higher I_ph and catalytic activity in methyl orange photoelectrodegradation than F-doped sample and B-doped sample. This showed a convincing evidence of F–B-codoping of TiO₂ had an obvious synergistic effect on the enhancement of photocurrents and photoelectrocatalytic activity.