Synthesis of alginate stabilized gold nanoparticles by γ-irradiation with controllable size using different Au3+ concentration and seed particles enlargement

Gold nanoparticles with pre-selected size in the range 5–40 nm were synthesized by γ-irradiation of Au³⁺ solution containing natural polysaccharide alginate as a stabilizer. The gold nanoparticles with controllable size were prepared by two approaches: (i) varying the concentration of Au³⁺ from 0.25 to 1 mM and alginate from 0.25% to 1% (w/v) and (ii) enlargement of seed particles with double size from 20 to 40 nm at [Au³⁺]/[Au⁰]=6. The obtained gold nanoparticles were characterized by UV–vis spectroscopy and transmission electron microscopy. The results indicated that γ-irradiation method is suitable for production of gold nanoparticles with controllable size and high purity.     

Short aspect ratio gold nanorods prepared using gamma radiation in the presence of cetyltrimethyl ammonium bromide (CTAB) as a directing agent

The synthesis of short aspect ratio gold nanorods using gamma radiation method by incorporating cetyltrimethyl ammonium bromide (CTAB) as a directing agent is reported in this communication. The radiolysis of Au⁺, in the presence of 2.5 nm Au seeds and 0.1 mol dm^?3 isopropanol, results in the formation of Au spheres as evident from surface plasmon resonance band at 527 nm. However, by carrying out radiolysis at lower radiation dose rate, short aspect gold nanorods having surface plasmon bands at 513 and 670 nm have been prepared. The formation of rods at low radiation dose rate was observed to be governed by the kinetics of particle growth. The TEM of as-synthesized nanoparticles confirmed the formation of uniform sized nanorods having an aspect of 2.4.     

Synthesis,characterizations of silica-coated gold nanorods and its applications in electroanalysis of hemoglobin

Gold nanorods (GNRs) were synthesized by a seed–mediated growth approach followed by TEOS polymerization leading to the formation of silica layer surrounding the gold nanorod core. TEM images showed that the silica-coated gold nanorods (GNRs@SiO₂) were dispersed with an average aspect ratio of 3.1 for the GNRs cores and a uniform thickness of the silica shell. The core/shell nanocomposites were further used as efficient supports for the immobilization of hemoglobin (Hb) to fabricate a novel biosensor. The immobilized Hb showed an enhanced electron transfer for its heme Fe(III) to Fe(II) redox couple. This biosensor showed an excellent bioelectrocatalytic activity towards H₂O₂ with a linear range from 8.0 × 10⁻⁷ to 6.1 × 10⁻⁵ M, and the detection limit was 6.0 × 10⁻⁸ M at 3σ. The apparent Michaelis–Menten constant of the immobilized hemoglobin was calculated to be 0.13 mM.     

Phase equilibrium in aqueous two-phase systems containing ethylene oxide–propylene oxide block copolymers and dextran

Phase equilibrium of aqueous two-phase systems containing the polysaccharide dextran and ethylene oxide (EO)/propylene oxide (PO) triblock copolymers was investigated in this work. Phase diagrams at 25.0 °C were experimentally obtained for systems formed by either dextran 19 (average molar mass of 8200 g mol⁻¹) or dextran 400 (average molar mass of 236 kg mol⁻¹) and one of the following block copolymers F38, F68, F108, P105 and P103, which present different structures in terms of EO/PO ratios and molar masses. It was possible to assess the influence of the polymer features on the phase equilibrium: the main factors affecting phase equilibrium being the size of dextran molecule and the structure (mainly the EO/PO ratio) of the copolymer. The Flory–Huggins equation was used to correlate the experimental data with good qualitative agreement, allowing the inference that changes in the copolymer hydrophobicity are the main responsible for the observed phase diagrams.     

Spectrophotometric study of stability constants of cimetidine–Ni(II) complex at different temperatures

Cimetidine, a histamine H₂-receptor, has a structure which enables it to act as a chelating agent. The formation of nickel(II) complex with cimetidine has been studied spectrophotometrically at an absorption maximum of 622 nm at different temperatures. The data show that nickel(II) and cimetidine combine in the molar ratio of 1:2. The stability constants of the complex were calculated to be 1.40–2.4 × 10⁸ by continuous variation method and 1.24–2.4 × 10⁸ by mole ratio method at 25 and 40 °C, respectively. The immediately formed complex shows stability with respect to time and temperature.     

Investigation of steam reforming of acetic acid to hydrogen over Ni–Co metal catalyst

Catalytic generation of hydrogen by steam reforming of acetic acid over a series of Ni–Co catalysts have been studied. The catalyst with the molar ratio of 0.25:1 between Ni and Co was superior to other catalysts. The effects of reaction temperature, liquid hourly space velocity (LHSV) and molar ratios of steam-to-carbon (S/C) were studied in detail over this catalyst. At T = 673 K, LHSV = 5.1 h⁻¹, S/C = 7.5:1, the catalyst exhibited the best performances. Acetic acid was converted completely to hydrogen, while H₂ selectivity reached up to 96.3% and CO₂ selectivity up to 98.1% was obtained, respectively. Ni–Co catalyst showed rather stable performances for the 70 h time-on-stream without any deactivation.     

Synthesis of gold nanorods using concentrated aerosol OT in hexane and its application as catalyst for the reduction of eosin

The microemulsion method for the preparation of nanoparticles is well known. We have used the aqueous core of highly concentrated aerosol OT in hexane solution to synthesize gold nanorod by utilizing the aqueous core of surfactant aggregates as host nanoreactor. The shape and size of the aqueous core as well as the particles formed inside the core can be controlled by changing the parameter W₀ (water to surfactant ratio), concentration of gold salt and the concentration of surfactant. When the concentration of the surfactant is very high the shape of the aqueous droplet does not remain spherical but take the shape of prolate. In our study we have made gold nanorods by the reduction of gold chloride with sodium borohydride in the aqueous core of 1 M AOT hexane at a W₀ of 10. The rods are highly monodispersed with a diameter of about 20 nm and a length of 200 nm with an aspect ratio of 10. The absorption spectra of the gold nanorods show two different peaks one at 535 nm and the other at 965 nm. The particles were used as a catalyst for the reduction of eosin with sodium borohydride. The rate constant comes out be very large in comparison with that of uncatalysed reaction. The reaction was carried out at various temperatures between 20 and 60 °C and the activation energy of the reaction was calculated using Arrhenius plot between–ln k and 1/T. The activation energy of the gold nanorods catalysed reaction comes out to be more than two times as compared to uncatalysed reaction.     

Preparation and properties of silica–gold core–shell particles

Silica-metal core–shell particles, as for instance those having siliceous core and nanostructured gold shell, attracted a lot of attention because of their unique properties resulting from combination of mechanical and thermal stability of silica and magnetic, electric, optical and catalytic properties of metal nanocrystals such as gold, silver, platinum and palladium. Often, the shell of the core–shell particles consists of a large number of metal nanoparticles deposited on the surface of relatively large silica particles, which is the case considered in this work. Namely, silica particles having size of about 600 nm were subjected to surface modification with 3-aminopropyltrimethoxysilane. This modification altered the surface properties of silica particles, which was demonstrated by low pressure nitrogen adsorption at ?196 °C. Next, gold nanoparticles were deposited on the surface of aminopropyl-modified silica particles using two strategies: (i) direct deposition of gold nanoparticles having size of about 10 nm, and (ii) formation of gold nanoparticles by adsorption of tetrachloroauric acid on aminopropyl groups followed by its reduction with formaldehyde.The overall morphology of silica–gold particles and the distribution of gold nanoparticles on the surface of modified silica colloids were characterized by scanning electron microscopy. It was shown that direct deposition of colloidal gold on the surface of large silica particles gives more regular distribution of gold nanopartciles than that obtained by reduction of tetrachloroauric acid. In the latter case the gold layer consists of larger nanoparticles (size of about 50 nm) and is less regular. Note that both deposition strategies afforded silica–gold particles having siliceous cores covered with shells consisting of gold nanoparticles of tunable concentration.     

Spectrophotometric determination of sildenafil citrate in pure form and in pharmaceutical formulation using some chromotropic acid azo dyes

Two simple and highly sensitive spectrophotometric methods were developed for the quantitative determination of the drug sildenafil citrate (SC), Viagra, in pure form and in pharmaceutical formulations, through ion-associate formation reactions (method A) with mono-chromotropic acid azo dyes, chromotrope 2B (I) and chromotrope 2R (II) and ion-pair reactions (method B) with bi-chromotropic acid azo dyes, 3-phenylazo-6-o-carboxyphenylazo-chromotropic acid (III), bis-3,6-(o-hydroxyphenylazo)-chromotropic acid (IV), bis-3,6-(p-N,N-dimethylphenylazo)-chromotropic acid (V) and 3-phenylazo-6-o-hydroxyphenylazo-chromotorpic acid (VI). The reaction products, extractable in methylene chloride, were quantitatively measured at 540, 520, 540, 570, 600 and 575 nm using reagents, I–VI, respectively. The reaction conditions were studied and optimized. Beer's plots were linear in the concentration ranges 3.3–87.0, 3.3–96.0, 5.0–115.0, 2.5–125.0, 8.3–166.7 and 0.8–15.0 μg mL^?1 with corresponding molar absorptivities 1.02 × 10⁴, 8.34 × 10³, 6.86 × 10³, 5.42 × 10³, 3.35 × 10³ and 2.32 × 10⁴ L mol^?1 cm^?1 using reagents I–VI, respectively. The limits of detection and Sandell's sensitivities were calculated. The methods were successfully applied to the analysis of commercial tablets (Vigoran) and the recovery study reveals that there is no interference from the common excipients that are present in tablets. Statistical comparison of the results was performed with regard to accuracy and precision using Student's t- and F-tests at 95% confidence level. There is no significant difference between the reported and proposed methods with regard to accuracy and precision.     

单金纳米棒的光散射分析化学:径向比与分析灵敏度的关系

单纳米颗粒作为信号感应单元在化学与生物传感应用中已引起广泛关注.本文通过暗场显微成像(iDFM)研究了不同径向比金纳米棒的光散射性质.将iDFM与扫描电子显微镜(SEM)结合表征种子生长法制备的金纳米棒,结果发现,因局域表面等离子体共振而展示出的红色散射光随单个金纳米棒的径向比增大逐渐红移,且金纳米棒对其周围介质折光率(RI)变化的敏感程度随径向比增大而增大.这一结果对设计高灵敏的生物纳米传感器、提高分析检测的灵敏度具有很好的指导意义.     

Silica–silver core–shell particles for antibacterial textile application

The silica–silver core–shell particles were synthesized by simple one pot chemical method and were employed on the cotton fabric as an antibacterial agent. Extremely small (1–2 nm) silver nanoparticles were attached on silica core particles of average 270 nm size. The optimum density of the nano silver particles was found which was sufficient to show good antibacterial activity as well as the suppression in their surface plasmon resonance responsible for the colour of the core–shell particle for antibacterial textile application. The change in the density and size of the particles in the shell were monitored and confirmed by direct evidence of their transmission electron micrographs and by studying surface plasmon resonance characteristics. The colony counting method of antibacterial activity testing showed excellent results and even the least silver containing core–shell particles showed 100% activity against bacterial concentration of 10⁴ colony counting units (cfu). The bonding between core–shell particles and cotton fabric was examined by X-ray photoelectron spectroscopy. The antibacterial activity test confirmed the firm attachment of core–shell particles to the cotton fabric as a result 10 times washed sample was as good antibacterial as that of unwashed sample. The bacterial growth was inhibited on and beneath the coated fabric, at the same time no zone of inhibition which occurs due to the migration of silver ions into the medium was observed indicating immobilization of silver nanoparticles on silica and core–shell particles on fabric by strong bonding.     

Excess properties and vapour pressure of {3-diethylaminopropylamine + cyclohexane}

The vapour pressures of liquid {3-diethylaminopropylamine (3-DEPA) + cyclohexane} were measured by a static method between T = (273.15 and 363.15) K at 10 K intervals. The excess molar volumes V^E at 298.15 K and excess molar enthalpies H^E at 303.15 K were also measured. The molar excess Gibbs free energies G^E were obtained with Barker’s method and fitted to the Redlich–Kister equation. The Wilson equation was also used. Deviations between experimental and predicted G^E and H^E, by using DISQUAC model, were evaluated     

Source term identification of environmental radioactive Pu/U particles by their characterization with non-destructive spectrochemical analytical techniques

Six radioactive particles stemming from Thule area (NW-Greenland) were investigated by gamma-ray and L X-ray spectrometry based on radioactive disintegration, scanning electron microscopy coupled with energy-dispersive and wavelength-dispersive X-ray spectrometer, synchrotron radiation based techniques as microscopic X-ray fluorescence, microscopic X-ray absorption near-edge structure (μ-XANES) as well as combined X-ray absorption and fluorescence microtomography. Additionally, one particle from Mururoa atoll was examined by microtomography. From the results obtained, it was found out that the U and Pu were mixed in the particles. The U/Pu intensity ratios in the Thule particles varied between 0.05 and 0.36. The results from the microtomography showed that U/Pu ratio was not homogeneously distributed. The ²⁴¹Am/^{238 + 239 + 240}Pu activity ratios varied between 0.13 and 0.17, indicating that the particles originate from different source terms. The oxidation states of U and Pu as determined by μ-XANES showed that U(IV) is the preponderant species and for Pu, two types of particles could be evidenced. One set had about 90% Pu(IV) while in the other the ratio Pu(IV)/Pu(VI) was about one third.     

Spectrophotometric determination of diphenhydramine hydrochloride in pharmaceutical preparations and biological fluids via ion-pair formation

A simple, sensitive and accurate spectrophotometric method has been described for the assay of diphenhydramine hydrochloride (DPH) in raw material and in biological samples. The method is based on extraction of DPH into dichloromethane as ion-pair complexes with patent blue (PB), eriochrome black T (EBT), methyl orange (MO) and bromocresol purple (BCP) in acidic medium. The coloured species exhibited absorption maxima at 632, 514, 428 and 414 nm for PB, EBT, MO and BCP, with molar absorptivity values of 1.32 × 10⁵, 2.36 × 10⁴, 3.68 × 10⁴ and 3.07 × 10⁴ l mol^?1 cm^?1, respectively. The reaction conditions were optimized to obtain the maximum colour intensity. Beer’s law was obeyed with a good correlation coefficient (0.9982–0.9993) in the concentration ranges 0.5–3, 2.0–16, 2.0–10 and 1.0–10 μg ml^?1 for PB, EBT, MO and BCP methods, respectively. The composition ratio of the ion-association complexes was found to be 1:1 in all cases as established by Job’s method. The conditional stability constant (K_f) and the free energy changes (ΔG°) were determined for all complexes formed. The proposed method was successfully applied for the determination of DPH in tablets and human urine with good accuracy and precision. Statistical comparison of the results with those obtained by the official method showed good agreement and indicated no significant difference in accuracy and precision.     

3,4,5-Trimethoxyphenol: A combined experimental and theoretical thermochemical investigation of its antioxidant capacity

The standard (p^° = 0.1 MPa) molar enthalpies of combustion and sublimation of 3,4,5-trimethoxyphenol were measured, respectively, by static bomb combustion calorimetry in oxygen atmosphere and by Calvet microcalorimetry. From these measurements, the standard molar enthalpy of formation in both the crystalline and gaseous phase, at T = 298.15 K, were derived: ?(643.4 ± 1.9) kJ · mol^?1 and ?(518.1 ± 3.6) kJ · mol^?1, respectively. Density functional theory calculations for this compound and respective phenoxyl radical and phenoxide anion were also performed using the B3LYP functional and extended basis sets, which allowed the theoretical estimation of the gaseous phase standard molar enthalpy of formation through the use of isodesmic reactions and the calculation of the homolytic and heterolytic O–H bond dissociation energies. There is good agreement between the calculated and experimental enthalpy of formation. Substituent effects on the homolytic and heterolytic O–H bond dissociation energies have been analysed.     

In‐Situ covalent synthesis of gold nanorods on GO surface as ultrasensitive Raman probe

In this paper, using thiolated graphene oxide (GO‐O‐SH) as substrate, gold nanorods (AuNRs) covalently linked to the GO surface by in‐situ seed growth method were first reported. The as‐prepared composites were characterized by UV–vis spectrum, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT‐IR). Experimental results indicated that the introduction of short flexible organic chain between GO and AuNRs contributed to the homogenous synthesis of gold rods, and uniform gold nanorods with aspect ratio within 3~8 were covalently linked to the surface of GO with high stability and yield. The strategy represented an outstanding improvement in comparison to the traditional route for fabricating GO@AuNRs composites. Furthermore, based on coupling of the two nanomaterials, the composites could act as high sensitive Raman probe with limit of detection (LOD) reaching 1 × 10^?12 M.     

Ovalbumin-stabilized gold nanoclusters with ascorbic acid as reducing agent for detection of serum copper

Ovalbumin-stabilized gold nanoclusters(OVA@AuNCs) were prepared with ascorbic acid as a reducing agent. This strategy could realize the synthesis of water-soluble OVA@AuNCs within 20 min. The asprepared fluorescent probe showed a red fluorescence emission at 630 nm. Moreover, the properties of the OVA@AuNCs were characterized by transmission electron microscope, dynamic light scattering,ultraviolet-visible spectroscopy, fluorescent spectroscopy. Based on the surface electron density decrease-induced fluorescence quenching mechanism, the OVA@AuNCs provided high sensitivity and selectivity for sensing copper ions. A good linear relationship was obtained between the fluorescence intensity of OVA@AuNCs and the concentration of copper ions in the range of 5.0-100.0 μmol/L(R~2=0.999) with a detection limit of 640 nmol/L Furthermore, the rat serum copper contents were determined by using the OVA@AuNCs based assay, indicating great potential of fluorescent probes for application in biological and clinical analysis.     

Spectrophotometric determination of carbamazepine and mosapride citrate in pure and pharmaceutical preparations

Simple, rapid and sensitive spectrophotometric methods were developed for the determination of carbamazepine and mosapride citrate drugs in pure and pharmaceutical dosage forms. These methods are based on ion pair and charge transfer complexation reactions. The first method is based on the reaction of the carbamazepine drug with Mo(V)–thiocyanate in hydrochloric acid medium followed by an extraction of the coloured ion-pair with 1,2-dichloroethane and the absorbance of the ion pair was measured at 470 nm. The second method is based on the formation of ion-pairs between mosapride citrate and two dyestuff reagents namely bromothymol blue (BTB) and bromocresol green (BCG) in a universal buffer of pH 4 and 3, respectively. The formed ion-pairs are extracted with chloroform and methylene chloride and measured at 412 and 416 nm for BTB and BCG reagents, respectively. The third method is based on charge transfer complex formation between mosapride citrate (electron donor) and DDQ (π-acceptor reagent) and the absorbance of the CT complexes was measured at 450 nm. All the optimum conditions are established. The calibration graphs are rectilinear in the concentration ranges 10–350 for carbamazepine using Mo(V)–thiocyanate and 4–100, 4–60 and 10–150 μg mL^?1 for mosapride citrate using BTB, BCG and DDQ reagents, respectively. The Sandell sensitivity (S), molar absorptivity, correlation coefficient, regression equations and limits of detection (LOD) and quantification (LOQ) are calculated. The law values of standard deviation (0.04–0.09 for carbamazepine using Mo(V)–thiocyanate and 0.022–0.024, 0.013–0.018 and 0.013–0.020 for mosapride citrate using BTB, BCG and DDQ, respectively) and relative standard deviation (0.630–2.170 for carbamazepine using Mo(V)–thiocyanate and 0.123–1.43, 0.102–0.530 and 0.226–1.280 for mosapride citrate using BTB, BCG and DDQ, respectively) reflect the accuracy and precision of the proposed methods. The methods are applied for the assay of the two investigated drugs in pharmaceutical dosage forms. The results are in good agreement with those obtained by the official method.     

Synthesis and Characterization of Hydrotalcite at Different Mg/Al Molar Ratios

Synthesis and characterization of Mg-Al hydrotalcite have been studied. Synthesis of Mg-Al hydrotalcite was carried out using co-precipitation method at constant pH followed by hydrothermal treatment at 110 °C for 12 hours. The effect of Mg/Al molar ratios 2:1 and 3:1 was investigated by using XRD, FTIR, and SEM-EDX. The results showed that these synthesized samples were identical to hydrotalcite materials based on X-ray diffractogram and FTIR spectra. The XRD patterns exhibit sharp reflection with high intensity with characteristic basal spacing at 11-23°, broad and asymmetric peaks at 34-66°. The FTIR spectra for the synthesized samples are in good agreement with slight shifting peaks at certain wavenumber characteristic of hydrotalcite. The morphologies of synthesized samples were shown by SEM and particles were formed as an accumulation of primary nanoparticles. Meanwhile chemical composition of the final products showed that Mg/Al ratio didn’t meet the theoretical value because the reaction under optimum pH. In general it is showed that molar ratio affected on the structure and material properties of synthesized hydrotalcite.     

Chemical characterization and phase behaviour of grape seed oil in compressed carbon dioxide and ethanol as co-solvent

The aim of this work is to report phase equilibrium experimental results for the systems grape oil/carbon dioxide and (grape oil/carbon dioxide + ethanol). The oil was obtained by supercritical extraction from the grape seed residue from wine production. The static synthetic method using a variable-volume view cell was employed for obtaining the experimental bubble and dew (cloud) points transition data over the temperature range of (313.15 to 343.15) K and pressures up to 20.6 MPa. The experiments were carried out using (ethanol + CO₂) overall mass fractions ranging from 0.50 to 0.99, keeping a fixed ethanol to carbon dioxide molar ratio at 1:3. Results indicate the existence of complex phase behaviour for all temperatures investigated with the occurrence of vapour–liquid, liquid–liquid and vapour–liquid–liquid phase transitions observed.