Reaction of <Emphasis Type="Italic">N</Emphasis>-phenyltriflamide with 1,2-dibromoethane and propargyl bromide. Unexpected cleavage of С–С and С–N bonds

Reaction of N-phenyltriflamide with 1,2-dibromoethane under basic conditions in DMSO unexpectedly results in N-methyl-N-phenyltriflamide and 1,3-diphenylurea. The presumed reaction mechanism includes the formation of unstable intermediate disubstitution product TfN(Ph)CH₂CH2N(Ph)Tf that suffers the the С–С bond cleavage resulting in TfN(Me)Ph and N,N′-methanediylbis(N-phenyltriflamide). The latter reacts with K₂CO₃ releasing two molecules of potassium triflinate and after hydrolysis of diphenylcarbodiimide PhN=C=NPh gives 1,3-diphenylurea. With propargyl bromide, N-phenyltriflamide affords N-propargyl-Nphenyltriflamide in high yield. The bromination of the latter results in a mixture of Z,E-isomers of N-(2,3-dibromoprop-2-en-1-yl)-N-phenyltriflamide which undergo dehydrobromination giving first N-(3-bromopropanedienyl)-N-phenyltriflamide and then the products of the C–N bond cleavage: N-phenyltriflamide and 3,3-dimethoxyprop-1-yne.     

Syntheses and characterization of novel ruthenium complexes based on 1,3-dicyanobenzene

The syntheses and full characterization of novel ruthenium complexes based on 1,3-dicyanobenzene are described. Crystal structures are reported for both [1,3-(cis-RuCl(P(CH₃)₃)₄NC)₂C₆H₄][PF₆]₂ (1cis) and [1,3-(trans-RuCl(dppe)₂NC)₂C₆H₄][H₂PO₄]₂ (3′). Ligand substitution in the homobimetallic complex (3) leads easily to the monometallic analogue, [1,3-(trans-RuCl(dppe)₂NC)C₆H₄(CN)][PF₆] (4). A heterobimetallic complex, [1,3-(trans-RuCl(dppe)₂NC)C₆H₄(CN-FeCp(dppe))][PF₆]₂ (5), of satisfactory purity is also obtained.     

Synthesis and polymerization of novel fluorinated acrylates and methacrylates bearing alkoxyl groups derived from radical addition reaction of perfluoroisopropenyl ester

Radical addition of 2-benzoxypentafluoropropene [CF₂C(CF₃)OCOC₆H₅] (BPFP) with alcohols such as ethanol and 2-propanol was investigated to afford fluorinated alcohols. Radical addition of BPFP with cyclic ethers such as tetrahydrofuran, 1,3-dioxolane and tetrahydropyran was also achieved to afford addition products followed by hydrolysis to yield fluorinated alcohols possessing cyclic structures. Novel fluoroalkyl acrylates and methacrylates were synthesized from the fluorinated alcohols with (meth)acryloyl chlorides. Radical polymerization of the fluoroalkyl (meth)acrylates yielded polymers of 1.2 × 10⁵ as the highest molecular weight.     

Novel phosphonated bicyclic frameworks from Diels-Alder reaction as chelating agents of di- and trivalent metal cations

The synthesis of novel [4+2] cycloadducts by Diels-Alder (DA) reaction between diethyl 1-phosphono-1,3-butadiene and cyclic CC and NN dienophiles, such as maleimide and 1,2,4-triazole-3,5-dione derivatives, is described. These phosphonated bicyclic frameworks feature a cage shape enabling metal chelation. Indeed, stable complexes were formed in solution with M²⁺ and M³⁺ metal cations, as evidenced by HRMS in the ESI mode (electrospray ionization). L₁:M (one ligand-one metal) and L₂:M (two ligands-one metal) complexes were identified depending on the nature of the cation.     

Highly active phosphine-free carbene ruthenium catalyst for cross-metathesis of acrylonitrile with functionalized olefins

The carbene ruthenium complex [1,3-bis(2,6-dimethylphenyl)-4,5-dihydroimidazol-2-ylidene](C₅H₅N)₂(Cl)₂RuCHPh (8) was prepared by the reaction of [1,3-bis (2,6-dimethylphenyl)-4,5-dihydroimidazol-2-ylidene](PPh₃)(Cl)₂RuCHPh (7) with pyridine and used as a highly effective catalyst for the cross-metathesis of acrylonitrile with various functionalized olefins.     

1,1-Bis(trifluoromethyl)butadiene-1,3—A new fluorinated building block

Although 1,1-bis(trifluoromethyl)butadiene-1,3 (1) reacts with dimethylamine with selective formation of 1,4-adduct [trans-(CF₃)₂CHCHCHCH₂N(CH₃)₂], halogenation of 1 proceeds with predominant formation (>92%) of 1,2-adducts (CF₃)₂CCHCHXCH₂X (X = Cl or Br). Electrophilic conjugated addition of “ClF” or “BrF” to 1 proceeds exclusively with the formation of 1,2-adducts (CF₃)₂CCHCHFCH₂X (major) and (CF₃)₂CCHCHXCH₂F (X = Cl or Br). Difluorocarbene adds selectively to CHCH₂ moiety of 1 forming thermally stable vinylcyclopropane. In Diels-Alder reaction with linear or cyclic dienes (butadienes, cyclopentadiene, cyclohexadiene-1,3) and quadricyclane compound 1 behaves as dienophile providing for the reaction electron-deficient CHCH₂ bond. The relative rate of cycloaddition of 1 and other fluoroolefins to quadricyclane, measured by high temperature NMR, indicates that (CF₃)₂CCH acts as very strong electron-withdrawing substituent. Synthetic utility of products based on 1 was also demonstrated.     

Catalytic synthesis of vinylphosphanes via calcium-mediated intermolecular hydrophosphanylation of alkynes and butadiynes

The calcium complex [(thf)₄Ca(PPh₂)₂] (1) is a very effective catalyst for the hydrophosphanylation of substituted alkynes of the type R-CC-R (R = Me, Ph) yielding (E)-1,2-diphenyl-1-diphenylphosphanylethene (2a) and (Z)-1-phenyl-2-diphenylphosphanyl-1-propene (2b). The calcium-mediated hydrophosphanylation of butadiynes of the type R-CC-CC-R (R = Me, SiMe₃, Ph, Mes, tBu) proceeds less selectively and diverse products are obtained such as 1,4-substituted 1,4-bis(diphenylphosphanyl)-1,3-butadienes (3), 1,4-diphenyl-1,2-bis(diphenylphosphanyl)-1,3-butadiene (4), and 1,4-di(tert-butyl)-1,4-bis(diphenylphosphanyl)buta-1,2-diene (5). Besides these regioisomers also several configuration isomers with respect to the C=C double bonds [(E)/(Z) isomerism] are obtained. A catalytic cycle can be formulated with the first addition of a Ca-P bond of the catalyst 1 to a CC triple bond always leading to the formation of an intermediate with the newly formed C-P bond in 1-position whereas the remaining phosphanido calcium fragment binds to the carbon in 2-position. The addition of a second diphenylphosphane is much faster and therefore, only two-fold hydrophosphanylated butadiynes are observed. Neither addition products with only one HPPh₂ group nor those with more than two PPh₂ substituents are obtained.     

Carbon-carbon bond formation by radical addition of α-trifluoromethylacrylate with cyclic ethers

The radical addition reactivity of tert-butyl α-trifluoromethylacrylate (CH₂C(CF₃)COOC(CH₃)₃) (BFMA) with cyclic ethers was investigated in order to compare to that of perfluoroisopropenyl ester. One to one addition compound of BFMA with tetrahydrofuran (THF) was produced in fairy high yields in the presence of 2,2′-azobisisobutyronitrile, benzoyl peroxide or di-tert-butyl peroxide to give 2-substituted THF derivative. Time-conversion investigation showed much higher reactivity of BFMA compared to that of 2-benzoxypentafluoropropene [CF₂C(CF₃)OCOC₆H₅]. Radical additions of BFMA with 1,4-dioxane, 1,3-dioxolane and tetrahydropyran were also examined to afford corresponding 1:1 addition products in fairly high yields by achieving carbon-carbon bond formation. It is then concluded that no interconversion of fluoroalkylcarbon radical and hydrocarbon radical may take place in the reaction system of BFMA which possesses two less fluorines in the vinyl group compared to 2-benzoxypentafluoropropene. The method may be a facile way to prepare trifluoromethyl-substituted organic compounds accompanied by the formation of carbon-carbon bonds by the aid of fluorine atoms.     

Reaction of electron deficient NN bonds with acyloxyketenes and mesoionic 1,3-dioxolium-4-olates: fast equilibrium between acyloxyketenes and mesoionic 1,3-dioxolium-4-olates

Reaction of azodicarboxylates with acyloxyketenes arising from dehydrochlorination of acyloxyphenylacetyl chlorides was carried out to give triacylamidine derivatives in good yields. The same triacylamidine derivatives were also obtained in good yields from the reaction with mesoionic 1,3-dioxolium-4-olates generated by Rh₂(OAc)₄-catalyzed decomposition of phenyldiazoacetic anhydride derivatives. Formation of the same compounds from different starting materials is explained by 1,3-dipolar addition between electron deficient NN bonds and mesoionic 1,3-dioxolium-4-olates, indicating fast equilibrium between acyloxyketenes and mesoionic 1,3-dioxolium-4-olates.     

Infrared spectra of monomeric thioformaldehyde in Ar,N2 and Xe matrices

Pyrolysis products of 1,3-dithietane were trapped in low-temperature matrices and their infrared spectra were recorded. The vibrational bands of monomeric H₂CS, which was not perturbed by other decomposition products, were identified in Ar, N₂ and Xe matrices. These results will be useful to evaluate the frequency shifts of H₂CS induced by the interaction with other molecules.     

Highly active ruthenium-based catalyst for metathesis of cyano-contained olefins

Ruthenium benzylidene complex (H₂IMes)(2-CH₃-C₅H₄N)(Cl)₂RuCHPh [H₂IMes = 1,3-bis(2,6-dimethylphenyl)-4,5-dihydroimidazol-2-ylidene] (4), which introduced ortho substituted pyridine as dissociating ligand to weaken Ru-N bond and accelerate initiation through steric hindrance, was prepared by the reaction of (H₂IMes)(PPh₃)(Cl)₂RuCHPh (1) with 2-methylpyridine and proved to exhibit enhanced catalytic activity for cyano-contained olefin metathesis.     

Synthesis of new pentafluorosulfanylacrylates (F5SCHCHCHO, F5SCHCHCN, F5SCHCHCOOCH3) and use of them as dienophiles in Diels-Alder reaction

New pentafluoro-λ⁶-sulfanylacrylates (F₅SCHCHCHO, F₅SCHCHCN, F₅SCHCHCOOCH₃) were synthesized by a convenient and efficient method. These compounds are useful as intermediates in the preparation of pentafluoro-λ⁶-sulfanyl-containing cyclic and heterocyclic Diels-Alder cycloadducts.     

An isomerization—1,3-dipolar cycloaddition tandem reaction towards the synthesis of 3-aryl-4-methyl-5-O-substituted isoxazolines from O-allyl compounds

A new strategy for the synthesis of 3-aryl-4-methyl-5-O-substituted isoxazolines via tandem catalytic isomerization of O-allyl systems to O-(1-propenyl) systems—1,3-dipolar cycloaddition (1,3-DC) to nitrile oxides is presented. The influence of the heteroatom in Ph-X-CHCHCH₃ (X=O, S, or Se) on the regio- and stereoselectivity of ArCNO 1,3-cycloaddition to these dipolarophiles is analyzed as well. The dipolarophiles were obtained via [RuClH(CO)(PPh₃)₃]–, [RuH₂(CO)(PPh₃)]– or base (KOH/18-crown-6)-catalyzed double bond migration in corresponding allyl ethers, O-allyl acetals, PhS– and PhSe–allyl systems. Cycloadditions of nitrile oxides to O-(1-propenyl) systems were fully regioselective whereas in the reactions of ArCNO with the PhS–(1-propenyl) and PhSe–(1-propenyl) systems both possible regioisomers were formed. It was established that within the majority of dipolarophiles of ROCHCHCH₃ type 1,3-DC is concerted, while for some dipolarophiles of RXCHCHCH₃ (X=O and R=Ph₃C, 2,3-dihydroxypropyl, tetrahydropyran-2-yl; X=S or Se and R=Ph) type 1,3-DC turns into a two-step reaction with simultaneous rotation about C–C bond. The results of the experiments have been analyzed theoretically using DFT calculations. The results of these calculations agreed well with the experimental data.     

New insights into bromination process: effective preparation of Ambroxol

Ambroxol used as an expectorant in treating respiratory diseases was effectively prepared with a total yield of 62%, with o-toluidine as the feedstock via successive procedures of electrophilic bromination, acetylation, radical benzylic bromination, N-alkylation and hydrolysis processes. The addition of aqueous hydrogen peroxide could enhance the utilisation of liquid bromine in the electrophilic bromination of o-toluidine, avoiding the hazardous HBr generated as a by-product. In addition, liquid bromine promoted by MnO₂ was used efficiently for the radical benzylic bromination of N-acetyl-N-(2,4-dibromo-6-methylphenyl)acetamide under mild conditions.     

Effect of conformational structure on the structural directivity of the opening of acetal rings by organomagnesium compounds

Conclusions 2,4-Dimethyl-1,3-dioxane having a conformation of a chair with a cis-equatorial arrangement of substituents, under-goes cleavage by ethylmagnesium bromide at the C₂-O₁, and C₂-O₃ bonds with the same probability, whereas cis- and transisomers of 2,4-dimethyl-1,3-dioxolane with conformations close to planar, react under the same reaction conditions with strict specificity at the C₂-O₁ bond, thus indicating strong spatial screening of the O₃ atom in 4-methyl substituted 1,3-dioxolanes.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 6, pp. 1343–1346, June, 1969.     

Catalytic multimolecular reactions of 1,3-dicarbonyl CH acids with CH<Subscript>2</Subscript>O and <Emphasis Type="Italic">S</Emphasis>- and <Emphasis Type="Italic">N</Emphasis>-nucleophiles

The literature data on the synthesis and properties of oxo-functionalized acyclic and cyclic sulfides obtained by the catalytic multicomponent reactions of 1,3-dicarbonyl compounds with formaldehyde and S-nucleophiles are summarized. An approach to the multimolecular four-component heterocyclization of 1,3-dicarbonyl compounds with CH₂O and S- and N-nucleophiles in the synthesis of sulfanyl-substituted azaheterocycles is discussed.     

Platinum-catalyzed double silylations of alkynes with bis(dichlorosilyl)methanes

Bis(dichlorosilyl)methanes 1 undergo the two kind reactions of a double hydrosilylation and a dehydrogenative double silylation with alkynes 2 such as acetylene and activated phenyl-substituted acetylenes in the presence of Speier’s catalyst to give 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes 4 as cyclic products, respectively, depending upon the molecular structures of both bis(dichlorosilyl)methanes (1) and alkynes (2). Simple bis(dichlorosilyl)methane (1a) reacted with alkynes [R¹-CC-R²: R¹ = H, R² = H (2a), Ph (2b); R¹ = R² = Ph (2c)] at 80 °C to afford 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 as the double hydrosilylation products in fair to good yields (33-84%). Among these reactions, the reaction with 2c gave a trans-4,5-diphenyl-1,1,3,3-tetrachloro-1,3-disilacyclopentane 3ac in the highest yield (84%). When a variety of bis(dichlorosilyl)(silyl)methanes [(Me_nCl_3 − nSi)CH(SiHCl₂)₂: n = 0 (1b), 1 (1c), 2 (1d), 3 (1e)] were applied in the reaction with alkyne (2c) under the same reaction conditions. The double hydrosilylation products, 2-silyl-1,1,3,3-tetrachloro-1,3-disilacyclopentanes (3), were obtained in fair to excellent yields (38-98%). The yields of compound 3 deceased as follows: n = 1 > 2 > 3 > 0. The reaction of alkynes (2a-c) with 1c under the same conditions gave one of two type products of 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes (4): simple alkyne 2a and terminal 2b gave the latter products 4ca and 4cb in 91% and 57% yields, respectively, while internal alkyne 2c afforded the former cyclic products 3cc with trans form between two phenyl groups at the 3- and 4-carbon atoms in 98% yield, respectively. Among platinum compounds such as Speier’s catalyst, PtCl₂(PEt₃)₂, Pt(PPh₃)₂(C₂H₄), Pt(PPh₃)₄, Pt[ViMeSiO]₄, and Pt/C, Speier’s catalyst was the best catalyst for such silylation reactions.     

Bromination of pyridine in the presence of some lewis acids

The bromination of pyridine in the form of complexes with some Lewis acids and in the presence of catalytic amounts of the latter was studied. It is shown that bromination takes place readily at 100 °C in the presence of catalysts such as AlCl₃, ZnCl₂, CuCl₂, SbCl₃, InCl₃, TeCl₄, and HgCl₂. The principal bromination products are 3-bromopyridine and 3,5-dibromopyridine. The problem of the possibility of so-called back-bonding in the case of elements of the higher periods (particularly In, Te, and Sb) is discussed.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1236–1239, September, 1981.