β-卤素取代对杯[4]吡咯构象及主-客体相互作用的影响(Ⅰ)——分子力学/分子动力学研究

通过分子力学/分子动力学模拟,获得4种游离杯[4]吡咯以及杯[4]吡咯-卤素阴离子主-客体复合物的稳定构象,用偶极子模型解释了β位卤素取代对游离杯[4]吡咯稳定构象、杯[4]吡咯-卤素阴离子复合物的结构及其结合能的影响,指出造成这些影响的主要因素是不同卤素取代导致杯[4]吡咯的吡咯环基团偶极大小不同.计算了不同杯[4]吡咯与卤素阴离子的结合能,当杯[4]吡咯β位上的H原子被卤素阴离子取代后,杯[4]吡咯对阴离子的识别能力加强.     

Spectroscopic and spectrometric studies of anion recognition with calix[4]pyrroles in different reaction conditions

The binding studies of calix[4]pyrroles (1–6) with fluoro, chloro, bromo, iodo and sulphato anions generated from normal-tetrabutylammoniumfluoride, normal-tetrabutylammoniumchloride, normal-tetrabutylammoniumbromide, normal-tetrabutylammoniumiodide, and normal-tetrabutylammoniumsulphate respectively were investigated by electrospray ionization mass spectrometry (ESI-MS) in dichloromethane–acetonitrile in negative ion mode. The efficacy of a particular calix[4]pyrrole to bind with anions was found maximum at low cone voltage of the instrument, at high cone voltage the binding was suppressed due to removal of anion from the cavity of the macrocycles. The binding strength was found inversely proportional to the size of anion for a particular calix[4]pyrrole. The fragmentation pattern of calix[4]pyrrole was observed at higher cone voltage of ESI-MS and was interpreted. The association constants of calix[4]pyrroles and anions obtained from electronic transition studies were in good agreement with that observed from ¹H NMR titration studies.     

Synthesis and characterisation of a calix[4]pyrrole functional polystyrene via ‘click chemistry’ and its use in the extraction of halide anion salts

A polystyrene with pendant calix[4]pyrroles was prepared via ‘click reaction’ strategy. First, a poly(styrene-co-chloromethylstyrene) with approximately 12% of chloro groups was prepared by conventional free radical polymerisation. The chloro groups were then converted to azido groups using NaN₃ in N,N-dimethylformamide. An alkyne-functionalised calix[4]pyrrole was then coupled to the azido-functionalised polystyrene by click chemistry with high efficiency. The resulting polystyrene with pendant calix[4]pyrroles was used to extract fluoride and chloride anions (as their tetrabutylammonium salts) from their aqueous solutions to organic media.     

N-confused calix[4]pyrroles

This is a first review devoted to N-confused calix[4]pyrroles (NCCPs). NCCPs are a relatively recent arrival to the family of the pyrrole-based anion binding macrocycles, being for the first time identified in 1999. Yet, in a relatively short time these calix[4]pyrrole (CP) isomers attracted attention of the community of research groups interested in anion binding and sensing. This is because they are relatively easy to synthesize, but mainly because they posses anion-binding properties that are different from that of regular calix[4]pyrroles. The difference in anion-binding properties stems from a different binding mode between the NCCP and anion. While the regular CPs adopt in the complex an ideal cone-like conformation where all four pyrroles-NHs engage in hydrogen bonding to the anion, the inverted pyrroles do not allow forming the cone. NCCPs bind anions via a confused cone (CC), by three NH hydrogen bonds with an anion and a CH–anion contact. This different binding mode results also in different anion-binding affinity and selectivity compared to regular CPs. Also, the inverted pyrroles offer a unique possibility for selective chemical modification of the receptor. The corresponding colorimetric sensors were tested for anion binding applications. The results of colorimetric assays for anions are presented and potential applications discussed.     

Tuning the anion binding properties of calixpyrroles by means of p-nitrophenyl substituents at their meso-positions

Extended cavity calix[4]pyrroles and a calix[6]pyrrole were synthesized by cyclization of 5-methyl-5-(4-nitrophenyl)dipyrromethane with acetone in the presence of acid. The solid-state structures of the novel macrocycles were determined by X-ray crystallography. The host-guest chemistry of these receptors towards halide ions was investigated in solution by ¹H NMR titration techniques and compared with those of the meso-octamethylcalix[4]pyrrole and meso-dodecamethylcalix[6]pyrrole. The binding of chloride anions was observed to occur with different affinities on the two faces of the novel calix[6]pyrrole derivative described here.     

Calix[6]pyrrole and hybrid calix[n]furan[m]pyrroles (n+m=6): syntheses and host-guest chemistry

Calix[6]pyrrole 2 and the "hybrid systems" calix[3]furan[3]pyrrole 12, calix[2]furan[4]pyrrole 13, and calix[1]furan[5]pyrrole 14, have been synthesized by increasing conversion of the furan units present in the readily accessible calix[6]furan 3 to pyrroles. The host-guest chemistry of these novel macrocycles towards a number of anions, including halogen ions, dihydrogen phosphate, hydrogen sulfate, nitrate, and cyanide has been investigated in solution by (1)H NMR titration techniques and/or phase transfer experiments. The solid-state structures of the free receptors 2, 12, and 13, the 1:1 complexes of calix[6]pyrrole 2 with chloride and bromide, and the 1:1 complex of 14 with chloride are also reported.     

Novel Deep Cavity Calix[4]pyrroles Derived from Steroidal Ketones

Novel steroidal calix[4]pyrroles were prepared in excellent yields from commercially available cholic acid derivatives using an efficient synthetic sequence. Once in hand, it was found that these calix[4]pyrroles exist in the form of four different configurational isomers. Separation of these isomers was achieved readily using normal phase HPLC techniques. Once purified, the steroidal calix[4]pyrroles were screened via -FABMS analyses to judge their utility in effecting the enantioselective recognition of appropriate organic anions. Results that provided support for antipodal R > S selectivity were obtained in the case of both tartaric acid and mandelic acid. Direct extraction studies were then carried out and these confirmed the pattern of R > S selectivity observed by -FABMS.     

Anion binding studies of fluorinated expanded calixpyrroles

The anion binding properties of fluorinated calix[n]pyrroles (n = 4-6) in aprotic solvents (acetonitrile and DMSO) and modified reaction conditions allowing for the synthesis and isolation of the hitherto missing dodecafluorocalix[6]pyrrole from the condensation of 3,4-difluoro-1H-pyrrole and acetone are described. In acetonitrile solution containing 2% water, the association constants for the 1:1 binding interaction between octafluorocalix[4]pyrrole and chloride anion obtained with isothermal titration calorimetry (ITC) and (1)H NMR titration methods were found to match reasonably well. As compared to its nonfluorinated congener, octafluorocalix[4]pyrrole was found to display enhanced binding affinities for several representative anions in pure acetonitrile as judged from ITC analyses. Similar analyses of the fluorinated calix[n]pyrroles revealed an increase in the relative affinity for bromide over chloride with increasing macrocycle size, as manifest in a decrease in the binding ratio K(a(Cl))/K(a(Br)). Anion binding studies in the solid state, involving single-crystal X-ray diffraction analyses of the chloride and acetate anion complexes of octafluorocalix[4]pyrrole and decafluorocalix[5]pyrrole, respectively, confirmed the expected hydrogen bond interactions between the pyrrolic NH protons and the bound anions.     

Synthesis and crystal structure of 15α,20α-di(4-hydroxylphenyl)calix[4]pyrroles and 10α,20β-di(4-hydroxylphenyl)calix[4]pyrroles

In the presence of methanesulfonic acid as catalyst, the condensation reactions of 5,5′-dialkyldipyrromethanes with p-hydroxyacetophenone in methanol resulted in a mixture of the unexpected polysubstituted 15α,20α-di(4-hydroxylphenyl)calix[4]pyrroles and the expected 10α,20β-di(4-hydroxylphenyl)calix[4]pyrroles in comparable lower yields. The crystal structures of the new calix[4]pyrroles and their oxyacetate derivatives were successfully determined by X-ray diffraction and the intermolecular interactions in the solid state is briefly discussed.     

Efficient ZnCl2 assisted synthesis of calix[4]pyrroles catalysed by Brønsted acidic ionic liquids

A facile and efficient protocol is reported for the synthesis of calix[4]pyrroles and N-confused calix[4]pyrroles in moderate to excellent yields by one-pot condensation of ketones and pyrrole in the presence of catalytic amount of nontoxic acidic ionic liquids. In this reaction the products were obtained in short reaction time with selectivity of regular calix[4]pyrroles.     

Syntheses of calix[4]pyrroles by amberlyst-15 catalyzed cyclocondensations of pyrrole with selected ketones

A facile and efficient protocol is reported for the synthesis of calix[4]pyrroles and N-confused calix[4]pyrroles in moderate to excellent yields by reaction of dialkyl or cycloalkyl ketones with pyrrole catalyzed by reusable Amberlyst(TM)-15 under eco-friendly conditions.     

Mono Halogen Substituted Calix[4]pyrroles: Fine-tuning the Anion Binding Properties of Calix[4]pyrrole

Abstract

Single halogen atom (i. e. I, Br, Cl and F) substituted calix[4]pyrroles, compounds 2, 3, 4 and 5, were synthesized. Studies of these systems reveal that replacement of a single β-pyrrolic hydrogen atom can increase the anion binding ability of calix[4]pyrroles for a variety of anions (e. g. Cl^?, Br^?, H₂PO₄ ^? and HSO^? ₄) relative to normal non-halogen substituted calix[4]pyrrole 1. In the case of chloride anion, the expected relative affinity sequence of 5 > 4 > 3 > 2 was observed. This was not found to be true for Br^?, H²PO^? ₄, and HSO^? ₄. Here, the chlorine substituted calix[4]pyrrole 4 was found to display a slightly higher affinity in the case of each anion than the fluorine-bearing derivative 5. This was rationalized in terms of intermolecular NH … F hydrogen bonding interactions being present in CD₂Cl₂ solutions of 5. Support for this latter conclusion came from concentration and temperature-dependent NMR spectroscopic studies.

A matched set of mono halogen substituted calix[4]pyrroles was used to study in detail, the extent to which halogen substituents may be used to fine-tune the anion binding properties of calix[4]pyrroles.     

N-Confused Calix

Next to the "normal" calix[4]pyrrole 1, the N-confused calix[4]pyrrole 2 is formed in substantial amounts (up to 22 % yield) as side product in the acid-catalyzed condensation reaction of ketones and pyrrole. In some cases, doubly N-confused calix[4]pyrroles are also formed.     

Synthesis and Properties of Functionalized Schiff Bases of 5α,10α-Di（4-hydroxylphenyl）calix[4]pyrrole and 5α,15β-Di（4-hydroxylphenyl）calix｜4] pyrrole

A series of calix[4]pyrrole meso-substituted Schiff bases was synthesized with 5α,10α-di（4- hydroxylphenyl）calix[4]pyrrole or 5α,15β-di（4-hydroxylphenyl）calix[4]pyrrole as starting materials. The synthetic routes included alkylation with methyl a-chlroroaceate, ammonolysis with alkylene diamine, and condensation with salieylladehyde or 2-hydroxynaphthaldehyde. The crystal structures of the new calix[4]pyrroles and their Schiff bases were determined by X-ray diffraction. The coordination properties of the representative ealix[4]pyrrole Sehiff bases to transition metal ions were also investigated by UV-Vis spectra.     

Lithiation of meso-octamethylcalix[4]pyrrole: a general route to C-Rim monosubstituted calix[4]pyrroles

Lithiation and subsequent addition of an electrophile to meso-octamethylcalix[4]pyrrole provides a straightforward synthetic route to new, C-rim monosubstituted calix[4]pyrroles. A variety of electrophiles were used, resulting in calix[4]pyrroles with appended functional groups including carboxyl, ester, iodo, and formyl. This method was optimized to give maximum yields of the monosubstituted derivatives with lowest possible contamination by di- and trisubstituted congeners. Solid-state studies, performed for a number of these derivatives, showed unexpected supramolecular interactions involving both solvents and the monosubstituted calix[4]pyrrole derivatives themselves.     

Synthesis and crystal structure of Ni,Cu complexes of 5-methyl-10,10,15,15,20,20-hexaethylcalix[4]pyrrole mono-Schiff bases

The functionalized calix[4]pyrrole meso-substituted Schiff bases were conveniently prepared by fourstep synthetic route. Furthermore, the nickel and copper complexes of calix[4]pyrrolemeso-substituted Schiff base with 1:2 stoichiometry were obtained. The crystal structures of the calix[4]pyrroles and their metal complexes were determined by X-ray diffraction.     

Cation/anion recognition by a partially substituted lower rim calix[4]arene hydroxyamide, a ditopic receptor

The complexation ability of a partially substituted lower rim calix[4]arene hydroxyamide derivative, 25,27-bis[N-(2-hydroxy-1,1-bishydroxymethylethyl)amino- carbonylmethoxy]calix[4]arene-26,28-diol, 1, for cations and anions was investigated through (1)H NMR, conductometry, spectrophotometry, and calorimetry in dipolar aprotic media. (1)H NMR studies of 1 in the deuterated solvents (acetonitrile, methanol, and dimethylsulfoxide) reflect ligand-solvent interactions in methanol and dimethylsulfoxide. As far as the cations are concerned, a selectivity peak is found when standard Gibbs energies of complexation of 1 with cations (alkaline-earth, zinc, and lead) are plotted against corresponding data for cation hydration. This finding reflects the key role played by the desolvation and binding processes in the overall complexation of this receptor and these cations in acetonitrile. This is also interpreted in terms of enthalpy and entropy data. Factors such as, the nature and the arrangement of donor atoms in the hydrophilic cavity of the ligand on cation complexation process, are discussed. This paper also addresses anion complexation processes. It is found that 1 interacts through hydrogen bond formation with fluoride, dihydrogen phosphate, and pyrophosphate in acetonitrile and N,N-dimethylformamide. The thermodynamics associated with these processes is fully discussed taking into account literature data involving calix[4]pyrroles and these anions in these solvents. Previous work regarding the water solubility of these ligands is discussed. It is concluded that 1 behaves as a ditopic ligand in dipolar aprotic media.     

Spectroscopic study on anion recognition properties of calix[4]pyrroles: effects of tetraalkylammonium cations

The solution binding properties of calix[4]pyrroles with anion (added as tetraalkylammonium salts) were investigated using UV-vis spectroscopic techniques. The obvious red-shift of absorption maximum band of calix[4]pyrrole in EtOH in the presence of the tetramethylammonium (TMA(+)) or tetraethylammonium (TEA(+)) salts were observed. These results displayed in electronic absorption spectra indicated calix[4]pyrrole receptors linking anionic species through multiple hydrogen bonding interactions are capable of using the periphery electron-rich "walls" for selectively binding electron-deficient tetraalkylammonium cation subunits by cation-pi charge-transfer interaction. It was seen that the stability of the calix[4]pyrrole-anion complex depends strongly on the cation. The meso-alkyl groups of the calix[4]pyrrole, the affinity for the anion subunits and the structure of tetraalkylammonium cations have considerable effects on the formation of cation-pi charge-transfer interaction.     

Synthesis and structural features of sulfur-substituted calix[4]pyrrole for a bottom-up control of the substrate-directed self-assembly of supramolecular structures

The synthesis of six new calix[4]pyrroles, containing sulfur-substituted phenylene units is reported. Halogen-anions and organic aromatic mono- and bis-anions have been selected to explore the formation of host-guest complexes and the possible self-assembly of multi-component structures with the six calixpyrroles. The type of aryl substitution modulates the strength of binding and the selectivity towards different anions and, in some cases, the combination of receptors and bis-anionic precursors, offers a way to build systems in which capsular assemblies are observed.     

杯[4]二吡咯与卤素阴离子相互作用的密度泛函理论研究

采用密度泛函B3LYP方法, 在6\|31G*/LANL2DZ水平上对杯[4]二吡咯主体分子及其与卤素阴离子形成的复合物进行研究.  结果表明, 杯[4]二吡咯可与卤素阴离子相互作用形成具有较高对称性的复合物, 其8个吡咯NH基团上的H原子均可以和卤素阴离子形成氢键; 杯[4]二吡咯与卤素阴离子结合能力大小的顺序为F- >Cl- >Br- > I-.  振动光谱、 电荷分布以及前线轨道计算结果表明, 杯[4]二吡咯与卤素阴离子相互作用的本质为氢键, 经BSSE校正的结合能与电荷转移程度、 N-H键键长和N-H伸缩振动频率变化呈线性关系.