Macroporous poly(methyl methacrylate) produced by phase separation during polymerisation in solution

Polymethyl methacrylate (PMMA) sponges were obtained by polymerization in a solution with monomer/ethanol ratios up to 20:80. The material obtained after the elimination of the solvent present a homogeneous distribution of dispersed pores up to a monomer/ethanol ratio lower than 40:60. For higher ethanol contents in the reacting mixture, the morphology of the sponge corresponds to a network of PMMA microparticles, leaving large empty spaces leading to highly porous structure. The monomer/ethanol ratio during polymerization has a large influence on the porosity, thermal, and mechanical properties of the material and, for large solvent contents, on the size of the polymer microparticles.     

Rapid determination of sterols in vegetable oils by CEC using methacrylate ester‐based monolithic columns

A method for the determination of sterols in vegetable oils by CEC with UV–Vis detection, using methacrylate ester‐based monolithic columns, has been developed. To prepare the columns, polymerization mixtures containing monomers of different hydrophobicities were tried. The influence of composition of polymerization mixture was optimized in terms of porogenic solvent, monomers/porogens and monomer/crosslinker ratios. The composition of the mobile phase was also studied. The optimum monolith was obtained with lauryl methacrylate monomer at 60:40% (wt:wt) lauryl methacrylate/ethylene dimethacrylate ratio and 60 wt% porogens with 20 wt% of 1,4‐butanediol (12 wt% 1,4‐butanediol in the polymerization mixture). Excellent resolution between sterols was achieved in less than 7 min with an 85:10:5 v/v/v ACN–2‐propanol–water buffer containing 5 mM Tris at pH 8.0. The limits of detection were lower than 0.04 mM, and inter‐day and column‐to‐column reproducibilities at 0.75 mM were better than 6.2%. The method was applied to the determination of sterols in vegetable oils with different botanical origins and to detect olive oil adulteration with sunflower and soybean oils.     

Monodisperse Crosslinked Microsphere Polymer Particles by Dispersion Copolymerization of Glycidyl Methacrylate and Divinylbenzene

Monodisperse polyglycidyl methacrylate (PGMA) microsphere particles crosslinked with divinylbenzene crosslinker were prepared by single-stage dispersion copolymerization in ethanol medium. 1 wt% of DVB was successfully incorporated due to the costabilizing effect of GMA as a surface-active monomer. This behavior may indicate that the fast formation of stable primary particle leads to monodispersity. The average particle sizes and the particle size distributions increased with the DVB crosslinker concentration. The effects of two different variables (initiator concentration, crosslinker concentration) on the rate of dispersion copolymerization have been investigated. With the initiator concentration, the polymerization procedure mainly depended on the dual natures of general dispersion polymerization, in the crosslinked state. Up to 1 wt% DVB, the particle growth was controlled by the monomer diffusion from the continuous phase into the particle phase.     

Fungal Biodegradation of Lignin Graft Copolymers from Ethene Monomers

Abstract

White rot Basidiomycetes were able to biodegrade styrene (1-phenylethene) or methyl methacrylate (4-methyl-2-oxy-3-oxopent-4-ene) graft copolymers of lignin containing different proportions of lignin and polystyrene [poly(1-phenylethylene)] or polymethyl methacrylate [poly(1-methyl-1-(1-oxo-2-oxypropyl)ethylene)]. The biodegradation tests were run on lignin/styrene copolymerization products which contained 10.3, 32.2, and 50.4 wt% lignin while biodegradation tests were run on lignin/methyl methacrylate copolymerization products which contained 11 to 18 wt% lignin. The styrene polymer samples were incubated with white rot Pleurotus ostreatus, Phanerochaete chrysosporium, Trametes versicolor, and brown rot Gloeophyllum trabeum. The methyl methacrylate polymer samples were incubated with white rot Pleurotus ostreatus, Trametes versicolor, and Phlebia radiata. White rot fungi degraded the plastic samples at a rate which increased with increasing lignin content in the copolymer sample. Both polystyrene and lignin components of the copolymer were readily degraded. Polystyrene pellets and polymethyl methacrylate sheets were not degradable in these tests. Degradation was verified by weight loss, quantitative ultraviolet spectrophotometric analysis of both lignin and styrene residue, and scanning electron microscopy of the plastic surface for both incubated or control samples. Brown rot fungus did not affect any of these plastics.     

胆固醇分子印迹的聚合有机凝胶及其吸附性能研究

报道了一种新型胆固醇分子印迹的聚合有机凝胶.以3-胆固醇酰氧基丙酸(COPA)为模板分子,通过可聚合凝胶剂N-十八烷基马来酰胺酸(ODMA)在甲基丙烯酸β-羟乙酯、甲基丙烯酸和聚乙二醇二甲基丙烯酸酯混合溶液的自组装,首先形成稳定的超分子有机凝胶,经UV光引发原位聚合,再经乙醇提取模板分子后制得胆固醇非共价印迹的聚合有机凝胶.偏光显微镜(POM)和场发射扫描电镜(FE-SEM)表明ODMA在单体混合物中自组装形成带状聚集体,这为其后形成的印迹聚合有机凝胶的孔穴稳定性提供了保证.印迹聚合有机凝胶对胆固醇的吸附效率可达到64%,并与ODMA和COPA的含量有关.实验表明,当ODMA的含量由1wt%增加到3 wt%时,吸附量由15.7 mg/g增加到22.9 mg/g.当COPA的含量由4 wt%增加到7 wt%时,吸附量由16.8 mg/g增加到22.2 mg/g.然而,当ODMA含量过多时,吸附量反而下降,这主要归因于体系网络密度的增加导致扩散阻力增加.而COPA含量过多时,可能干扰ODMA的自组装,影响印迹孔穴的稳定性,同样使得吸附量下降.     

掺钕聚甲基丙烯酸甲酯的光学特性

Nd(DBM)3Phen-doped (DBM is dibenzoylmethane and Phen is phenanthroline) polymethyl methacrylate (PMMA) is prepared. Optical absorption, excitation and emission spectra were analyzed for Nd3+ in Nd(DBM)3Phen-doped PMMA. Using the Judd-Ofelt theory, the absorption spectrum was analyzed. The Judd-Ofelt(J-O) intensity parameters of Nd(DBM)3Phen-doped polymethyl methacrylate were calculated to be Ω2 = 20.97 × 10-20 cm2, Ω4 = 3.42 × 10-20 cm2, Ω6 = 2.90 × 10-20 cm2. The radiative lifetime (631 μs)of the excited 4F3/2 level is given. The stimulated emission cross-sections and the fluorescence branch ratios for the 4F3/2 →4 IJ/ transitions are also evaluated. Analysis reveals that Nd(DBM)3Phen-doped PMMA is promising for application in polymer optical fibers and planar waveguides.     

Miscibility of PVC/PMMA blends by vicat softening temperature, viscometry, DSC and FTIR analysis

 This paper deals with the miscibility of polyvinyl chloride (PVC) with polymethyl methacrylate (PMMA). Blends of variable compositions from 0 to 100 wt% were prepared in the presence (15, 30 and 50 wt%) and in the absence of di ethyl- 2 hexyl phtalate as plasticizer. Their miscibility was investigated by using various analytical methods: determination of the Vicat softening temperature, a viscometry method based on the criterion of polymer–polymer miscibility, differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The results show that the plot of Vicat temperature against composition is a continuous curve, indicating the miscibility of the blend. The viscometry method and DSC find that the two polymers are miscible up to about 60 wt% of PMMA. This miscibility is due to a specific interaction of hydrogen bonding type between carbonyl groups (C=O) of PMMA and hydrogen from (CHCl) groups of PVC, as evidenced by FTIR spectroscopy. The two-band deconvolution shows an increase in associated groups percentage in the domain of miscibility.     

Polymer nanoparticles: their effect on rheological,thermal, and mechanical properties of linear low‐density polyethylene (LLDPE)

Rheological, thermal, and mechanical properties of polymer particle/LLDPE blends were studied in this paper. The blends were prepared individually by incorporating nanoparticles of polystyrene (nPS) of ～60 nm and polymethyl methacrylate (nPMMA) of ～50 nm with different wt% loading (i.e., 0.10–0.5%). It was shown from the experimental results that rheological, thermal and mechanical properties were increased as polymer particles blended with LLDPE. Blends with 0.25 wt% loading of nPS and 0.5 wt% loading of nPMMA exhibited better rheological, thermal, and mechanical properties compared with that of other wt% loadings. The improvements in properties were due to the close packing of LLDPE chains as recorded by improvement in crystallinity of LLDPE with addition of nPS and nPMMA as shown by SEM. Copyright © 2010 John Wiley & Sons, Ltd.     

Copolymerization and Properties of Multicomponent Crosslinked Hydrogels

A series of multicomponent hydrogels were prepared by the copolymerization of hydrophobic silicon-containing monomer 3-bis(trimethylsilyloxy) methylsilylpropyl glycerol methacrylate(Si MA) with the solvent-responsive monomers 2-hydroxyethyl methacrylate(HEMA) and N-vinyl pyrrolidone(NVP) and thermosensitive monomer N,N-dimethyl acrylamide(DMA). 2-Hydroxy-2-methyl phenyl acetone(D-1173) was chosen as UV initiator and five different dienes/triene monomers were selected as crosslinking agent in order to select the best crosslinker. The ethanol extraction experiments as well as the FTIR, DSC and TG results showed that the copolymerization was effective. The optical, permeability, and mechanical analysis results demonstrated that the obtained hydrogels were highly transparent with good oxygen permeability and mechanical properties. And the impact of crosslinker on the mechanical properties of the hydrogels was also discussed in detail. The basic results demonstrated that the obtained hydrogels had good stimuli-responsive effects to both p H value and solvent.     

Poly(ethylene-co-vinyl alcohol) and poly(methyl methacrylate) blends: Phase behavior and morphology

In this work blends of poly(ethylene-co-vinyl alcohol) (EVOH) with different ethylene contents (27, 32, 38 and 44 mol%) and poly(methyl methacrylate) (PMMA) were prepared by mechanical mixing in the melted state. The miscibility and melting behavior as a function of blend composition and the ethylene content in EVOH copolymers were investigated by means of differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). The morphology of the cryofractured surfaces was examined by scanning electron microscopy (SEM). DSC and DMTA data show that EVOH/PMMA blends are immiscible, independent of EVOH and blend composition. The SEM analysis in agreement with DMTA analysis indicates that the morphology of phases depends on the blend composition, with phase inversion occurring as the concentration of one or other polymer component increases. However, the copolymer composition apparently does not affect the domain size distribution for blends containing 20 wt% of EVOH or 20 wt% of PMMA. A better phase adhesion is observed mainly for blends with 50 wt% of each polymer component.     

Synthesis and characterization of magnetic and non-magnetic core-shell polyepoxide micrometer-sized particles of narrow size distribution

Core polystyrene microspheres of narrow size distribution were prepared by dispersion polymerization of styrene in a mixture of ethanol and 2-methoxy ethanol. Uniform polyglycidyl methacrylate/polystyrene core-shell micrometer-sized particles were prepared by emulsion polymerization at 73 degrees C of glycidyl methacrylate in the presence of the core polystyrene microspheres. Core-shell particles with different properties (size, surface morphology and composition) have been prepared by changing various parameters belonging to the above seeded emulsion polymerization process, e.g., volumes of the monomer glycidyl methacrylate and the crosslinker monomer ethylene glycol dimethacrylate. Magnetic Fe(3)O(4)/polyglycidyl methacrylate/polystyrene micrometer-sized particles were prepared by coating the former core-shell particles with magnetite nanoparticles via a nucleation and growth mechanism. Characterization of the various particles has been accomplished by routine methods such as light microscopy, SEM, FTIR, BET and magnetic measurements.     

Quantitative analysis of (styrene/acrylonitrile/methyl methacrylate) co-polymer systems by infrared resonance spectroscopy

A detailed careful analysis of the infrared resonance (IR) spectra of polystyrene (PSt), polymethyl methacrylate (PMMA), polyacrylonitrile (PAN) and their co-mixtures were performed. Through this study the absorption peak area to weight ratios as well as working curves were obtained to test for their reliability as well as their suitability. Satisfactory results were achieved and these working curves were then used to measure the polymerized components of binary and ternary co-polymers. By investigating the acquired data we conclude that the monomer preferential polymeric sequence is St > MMA > AN. A quantitative method to measure P (St/AN/MMA) concentrations by IR spectroscopy is proposed in this work.     

Modification and Application of Poly(Ethylene Terephethalate) Nonwoven Fiber Using Octadecyl Acrylate and Acrylic Acid as Oil Sorbers

Three series of crosslinked octadecyl acrylate and acrylic acid copolymers were prepared through suspension copolymerization based on acrylic acid content (10, 30, 50%wt. ratio). Divinyl benzene (DVB) was used as a crosslinker with different weight ratios (1, 4 and 10%). Isopropyl alcohol or dioctyl phthalate and methyl benzoate were used as two different reaction solvents in the presence of ABIN as initiator. The prepared crosslinked copolymers were characterized by SEM, TGA and FTIR spectroscopic analyses. The prepared polymers were coated onto poly(ethylene terephethalate) nonwoven fiber (NWPET). The effect of copolymerization feed composition, crosslinker wt% and reaction media or solvent on swelling properties of crosslinked polymers were studied through the oil absorption tests in toluene and 10% of diluted crude oil with toluene. It was noticed that the maximum swelling of crosslinked copolymers was increased from 30 to 100 g/g after grafting of copolymers onto NWPET.     

Lignin bio-oil-based electrospun nanofibers with high substitution ratio property for potential carbon nanofibers applications

We reported a new approach for development of lignin bio-oil-based electrospun nanofibers (LENFs) that had high substitution ratio (up to 80 wt%) and good morphology. This approach was particularly unique and translatable as it used small molecule lignin bio-oil with high reactivity and low heterogeneity obtained via lignin depolymerization reaction to produce well-oriented LENFs. Firstly, effects of various blends solutions ratios and electrospinning parameters on the characteristics of the obtained LENFs were analyzed. The results showed that the optimal parameters that resulted in the best electrospun nanofibers were as follows: blend solution ratio, the 20 wt% blend solution containing 80 wt% straw lignin bio-oil (SLB) and 20 wt% polyacrylonitrile (PAN), flow rate, 1 mL/h, voltage, 20 kV, rotational speed, 500 r/min and the distance between needle and collection screen, 20 cm. Secondly, used the best LENFs, we also applied to prepare lignin bio-oil-based carbon nanofibers (LCNFs) and estimated its properties by scanning electron microscope (SEM), X-ray diffraction (XRD) patterns, Raman spectroscopy and tension testing. Our results demonstrated that compared with pure PAN carbon nanofibers (PCNFs), the as-prepared LCNFs had similar smooth surfaces, similar crystallinity and similar mechanical properties. This work can promote the utilization of lignin depolymerization main-products to produce lignin-based materials, while also help to reduce use of high-cost PAN.     

Thermal degradation studies on PMMA–HET acid based oligoesters blends

Imparting thermal stability to polymethyl methacrylate (PMMA) without affecting its optical clarity is attempted by incorporating HET acid based oligoesters. Pure PMMA and PMMA containing five and 20 wt% of four different oligoesters are separately prepared using bulk polymerization. The thermal properties of the materials studied using DSC, TG, TG–FTIR and Pyr–GC–MS are presented. The main volatile degradation products identified are CO, HCl, CO₂, H₂O, hexachlorocyclopentadiene, hexachloroendomethylene tetrahydrophthalic acid/anhydride and methyl methacrylate. A detailed mechanism for the influence of the degradation products of HET acid based oligoesters on the thermal degradation of PMMA is also presented.     

Investigation of Miscibility of Linseed Oil Epoxy with Poly(vinyl alcohol)

Blending of two polymers in solution is a simple and cost effective technique to improve upon the physical and mechanical properties of the component polymers. Maximum synergism in the properties of the two polymers occurs when they are thermodynamically miscible. Poly(vinyl alcohol) (PVA) yields tough, flexible and water sensitive films. Linseed oil epoxy(LOE), a product from sustainable resource, used as a plasticizer and corrosion resistant coating, does not produce free standing film. A blend of PVA with LOE may yield films of good toughness and flexibility, and low water absorption if the two components are miscible with each other. Blends of PVA with LOE were prepared in weight ratios 80/20, 60/40, 40/60 and 20/80 through solution method by mixing in dimethyl sulphoxide. In the first instance, the miscibility the two components were investigated using the techniques of viscosity and ultrasonic measurements. The study revealed that the two components showed miscibility up to below 60 wt% PVA in the blend as at the composition LOE: PVA 40/60, phase inversion occurs. Above this composition, immiscibility is indicated; differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) delineates the above behavior in the solid phase.     

不同交联剂对甲基丙烯酸-β-羟乙酯/E-51双甲基丙烯酸酯聚合物水凝胶性能的影响

以水溶性单体甲基丙烯酸-β-羟乙酯(HEMA)与大分子交联剂E-51双甲基丙烯酸酯(E-51-DMA)(质量比HEMA/E-51-DMA=90/10)为主要原料,分别引入了5种小分子交联剂:N,N′-亚甲基双丙烯酰胺(MBA)、二乙烯基苯(DVB)、双甲基丙烯酸乙二醇酯(EDMA)、1,1,1-三(丙烯酰氧甲基)丙烷(TAP)和2,2,2-三(丙烯酰氧甲基)乙醇(TAE),采用本体聚合方法合成了5个系列的聚合物水凝胶.研究了小分子交联剂的类型及用量对水凝胶溶胀性能、杨氏模量以及有效交联密度ve和聚合物-水相互作用参数χ的影响,并比较了不同交联剂的交联效率.结果表明,随着小分子交联剂用量的增大,水凝胶平衡含水量EWC逐渐降低,聚合物体积分数2逐渐增大,反映聚合物网络结构的有效交联密度ve以及热力学参数聚合物-水相互作用参数χ值也随之增大.通过理论交联密度和有效交联密度的线性拟合,得到所选用的5种小分子交联剂在E-51-DMA10/HEMA90水凝胶体系中的交联效率,其顺序为DVB>EDMA>TAE>MBA≈TAP.     

PMMA人工晶状体表面的CF4/O2等离子体修饰

为了改善聚甲基丙烯酸甲酯(PMMA)人工晶状体的生物相容性和透光性, 采用CF4/O2等离子体技术修饰其表面. 通过衰减全反射红外光谱(ATR-FTIR)、X射线光电子能谱(XPS)、静态接触角(CA)测定、扫描电子显微镜(SEM)、紫外-可见近红外光谱(UV-Vis)等方法进行表征, 结果表明, 经CF4/O2等离子体处理后, PMMA表面的含氟和含氧基团增加, 其表面的亲水性增强, 生物相容性改善, 紫外光的隔离效率增大. 因此, 通过CF4/O2等离子体修饰能够有效地改善PMMA人工晶状体的性质.     

三维大孔TiO2光催化剂的制备及其催化性能

 以聚甲基丙烯酸甲酯微球为模板,以钛酸正丁酯为原料,采用溶胶-凝胶法制备了具有三维结构的大孔TiO2. 采用差示扫描量热、热重-微分热重、X射线衍射、红外光谱、扫描电子显微镜和氮气吸附等手段对样品进行了表征. 结果表明,高温热处理后得到的三维大孔TiO2光催化剂的孔径为200 nm左右,孔径分布均匀, TiO2纳米晶粒中锐钛矿相和金红石相的含量分别为82%和18%. 光催化氧化实验表明,此种三维结构的TiO2对甲基橙溶液具有较好的光催化氧化性能.     

Electrical and optical characterization of PMMA doped with Y0.0025Si0.025Ba0.9725 (Ti(0.9)Sn0.1)O3 ceramic

<正>Poly(methylmetacrylate)(PMMA)/Y_(0.0025)Si_(0.025)Ba_(0.9725)(Ti_((0.9))Sn_(0.1))O_3(YBTS) composites were prepared at different weight ratios of YBTS(0 wt%,5 wt%,10 wt%and 20 wt%YBTS) in order to investigate effect of YBTS additions on the electrical and optical properties of PMMA host.The electrical properties(impedance,dielectric constant dielectric loss and AC conductivity) were studied in the frequency range 10 kHz-1 MHz and in temperature range 20-90℃.Upon increasing the contents of YBTS ceramic,we observed a reduction in the impedance and an increase in the dielectric constant,dielectric loss and AC conductivity of PMMA host.We also found that the relaxation process at high YBTS contents was due to relaxation in the ionic conductivity.The absorption coefficient(α) has been determined in the wavelength range 230-800 nm at room temperature for all YBTS-PMMA composites.Moreover,the addition of YBTS ceramic highly enhances the UV absorption of PMMA host especially below 300 nm.Addition of 20 wt%YBTS ceramic to PMMA host decreases the optical energy gap from 5 eV to 3.41 eV.Correlations between electrical,optical and SEM results are reported.