Extraction of cadmium,lead, cobalt,copper, and zinc ions from aqueous solutions into hydrophilic–hydrophobic ionic liquids

Extraction of cadmium(II), lead(II), cobalt(II), copper(II), and zinc(II) into ionic liquids tetraoctylammonium N-lauroyl sarcosinate and trioctylmethylammonium salicylate is studied. Cadmium(II), lead(II), copper(II) in tetraoctylammonium N-lauroyl sarcosinate and copper(II) in trioctylmethylammonium salicylate are quantitatively extracted from neutral and weakly alkaline solutions in the absence of additional reagents. The effect of the composition of aqueous and organic phases, as well as the contact time, on metal extraction is investigated.     

Extractive separation of Cu<Superscript>2+</Superscript>–Co<Superscript>2+</Superscript> and Ni<Superscript>2+</Superscript>–Co<Superscript>2+</Superscript> mixtures using <Emphasis Type="Italic">N</Emphasis>-salicylideneaniline

A study on the extraction of copper(II), cobalt(II), and nickel(II) from solutions containing ions of both metals with N-salicylideneaniline(SAN) in chloroform has been realized. Distribution of the metal ions in wide range of pH has been studied. Extraction of copper(II) was always favored over that of cobalt(II). Extraction of copper(II) from binary metal solution is selective and it can be quantitatively separated from cobalt(II). The equilibrium constant of the extraction of cobalt and nickel from an aqueous solution containing both metals using SAN were evaluated. The separation factors for cobalt and nickel were expressed as a function of the distribution of nickel and cobalt. From these results, salicylideneaniline is an adequate extractant for extractive separation of such mixtures.     

Extraction and complexing of copper(II) with benzoic acid N,N-dihexylhydrazide

The solubility and acid-base properties of benzoic acid N,N-dihexylhydrazide (BDHH) were studied. The extraction of copper(II), cobalt(II), nickel(II), zinc(II), iron(III), platinum(II), platinum(IV), chromium(III), chromium(VI), palladium(II), and molybdenum(VI) with this reagent was studied. It was shown that BDHH most efficiently extracts copper(II) from ammonia solutions and chromium(VI) from sulfuric acid solutions. In the extraction of copper(II), complexes with the [Cu(II)]: [BDHH] = 1: 1 and 1: 2 stoichiometries were found to form. The structure of the 1: 2 complex was suggested proceeding from its IR spectra. A copper(II) extraction isotherm was plotted.     

Complexation of transition metal ions on the surface of carboxyethylated aminopolysiloxanes

The effect of the nature of the sorbent matrix and the state of ions of some transition metals in solution on their sorption by carboxyethylated alumino-, zircono-, and titano-aminopolysiloxanes was studied. Modification of the aminopolysiloxane matrix with zirconia, alumina, or titania results in displacement of the optimal sorption ranges for copper(II), nickel(II), and cobalt(II) to alkaline pH. Comparison of the results of structural studies of the complexes of N-aryl-3-aminopropionic acids in solutions and compositions of equilibrium solutions upon sorption of metal ions from ammonia-acetate buffer systems demonstrated that metal ions are simultaneously coordinated by the functional groups of iminodipropionic acid, which are rigidly attached to on the polysiloxane matrix, and by monodentate molecular ligands (ammonia molecules) present in the buffer solution. A competitive influence of copper(II), nickel(II), and cobalt(II) on the sorption from mixed solutions was established.     

Extraction of Copper from Sulfate Solutions with Hydrazides of Versatic Higher Acids in the Presence of Accompanying Metals

Fundamental aspects of the extractive recovery of copper(II) in the presence of accompanying metals from sulfuric acid solutions with hydrazides of Versatic (GVIK 509) α-branched tertiary carboxylic acids in kerosene or its mixture with modifying agents: 2-ethylhexanol or alkylphenol. The selective extraction of copper(II) in the presence of nickel(II), cobalt(II), zinc(II), and iron(III) with hydrazides in kerosene is possible at pH 0.1–0.6. The separation coefficients of element pairs were calculated. It was found that the modifiers have no effect on the quantitative extraction of copper(II), but strongly change the extraction pattern of the metals under study. It was shown that the re-extraction of copper(II) with sulfuric acid solutions is in principle possible.     

Chelating ion-exchangers containing n-substituted hydroxylamine functional groups: Part V. Iron,copper, and uranium separations on Duolite CS-346 resin

The separation of iron(III), copper(II) and uranyl(II) ions from a series of salt solutions by chelating ion exchange on Duolite CS-346 resin by pH control is described. Recoveries of these ions from cobalt and nickel salt solutions were quantitative. Iron may also be separated from copper by selective sorption with pH control, and uranium from iron and copper by selective desorption with sodium carbonate solution as eluent.     

Extraction and complexation of nonferrous metals with 3-substituted 2-sulfonylaminothiophenes

Trends of copper(II), nickel(II), cobalt(II), and zinc(II) extraction recovery from ammoniac solutions by 3-substituted 2-sulfonylaminothiophenes have been studied. The compositions and structures of extractable complexes have been determined. A mechanism has been proposed suggested for the recovery of nonferrous metals. Extraction constants have been calculated.     

Coprecipitation with yttrium phosphate as a separation technique for iron(III), lead, and bismuth from cobalt, nickel, and copper matrices

The coprecipitation behavior of 44 elements (47 ions because of chromium(III,VI), arsenic(III,V), and antimony(III,V)) with yttrium phosphate was investigated at various pHs. Yttrium phosphate could quantitatively coprecipitate iron(III), lead, bismuth, and indium over a wide pH range; however, 18 ions, including alkali metals and oxo anions, such as vanadium(V), chromium(VI), molybdenum(VI), tungsten(VI), germanium(IV), arsenic(III,V), selenium(IV), and tellurium(VI), were scarcely collected. In addition, 19 ions, including cobalt, nickel, and copper(II), were hardly coprecipitated at pHs below about 3. Based on these results, the separation of iron(III), lead, and bismuth from cobalt, nickel, and copper(II) matrices was investigated. Iron(III), lead, and bismuth ranging from 0.5 to 25 μg could be separated effectively from a solution containing 0.5 g of cobalt, nickel, or copper at pH 3.0. The separated iron(III), lead, and bismuth could be determined by inductively coupled plasma atomic emission spectrometry using internal standardization. The detection limits (3σ, n = 7) of iron(III), lead, and bismuth were 0.008, 0.137, and 0.073 μg, respectively. The proposed method was applied to the analyses of metals and chlorides of cobalt, nickel, and copper.     

Potentiometric determination of stability constants of cyanoacetato complexes of cobalt(II), nickel(II), copper(II), zinc(II), cadmium(II) and lead(II)

Stability constants of cyanoacetato complexes of cobalt(II), nickel(II), copper(II), zinc(II), cadmium(II) and lead(II) were determined potentiometrically at 25.0 +/- 0.1 degrees and ionic strength 2M (sodium perchlorate). The stability constants were evaluated by a weighted least-squares method.     

Investigations of Cobalt, Nickel, and Copper Diethyldithiocarbamates Using Thermal Lens Spectrometry

Thermal lens spectrometry was used to study the dissociation kinetics of diethyldithiocarbamate complexes of copper(II), cobalt(III), and nickel(II) as a function of pH in the presence of chloride and sulfate ions. It is shown that, as distinct from conventional spectrophotometric and potentiometric measurements, the reversible dissociation of the test complexes and the irreversible oxidation of the ligand can be studied separately (at a level of n × 10^–8–n × 10^–6 M) using thermal lens spectrometry. Because of work in more dilute solutions and due account of the kinetic features of the systems in question, thermal lens spectrometry provides a higher accuracy of the determination of stability constants for diethyldithiocarbamate complexes of copper(II), cobalt(III), and nickel(II). The adsorption of the diethyldithiocarbamate complexes in question from water–ethanol solutions (1 : 3) on Silasorb C₁₈ silica is studied, and the adsorption constants are determined. The limits of detection of copper(II), cobalt(III), and nickel(II) diethyldithiocarbamates obtained in extraction–thermal-lens determination are n × 10^–8 M.     

Structure,insertion electrochemistry,and magnetic properties of a new type of substitutional solid solutions of copper,nickel, and iron hexacyanoferrates/hexacyanocobaltates

Substitutional solid solutions of metal hexacyanometalates in which low-spin iron(III) and cobalt(III) ions populate the carbon-coordinated sites were synthesized and studied by powder diffraction including Rietveld refinement, cyclic voltammetry of immobilized microparticles, diffuse reflection vis-spectrometry, and magnetization techniques. The continuous solid solution series of potassium copper(II), potassium nickel(II), and iron(III) [(hexacyanoferrate(III))(1-x)(hexacyanocobaltate(III))(x)] show that the substitution of low-spin iron(III) by cobalt(III) in the hexacyanometalate units more strongly affects the formal potentials of the nitrogen-coordinated copper(II) and high-spin iron(III) ions than those of the remaining low-spin iron(III) ions. In the case of copper(II) and iron(III) [(hexacyanoferrate(III))(1-x)(hexacyanocobaltate(III))(x)] the peak currents decrease much more than can be explained by stoichiometry, indicating that the charge propagation is slowed by the substitution of low-spin iron(III) by cobalt(III). The Rietveld refinement of all compounds confirmed the structure initially proposed by Keggin for Prussian blue and contradicts the structure described later by Ludi. The dependencies of lattice parameters on composition exhibit in all series of solid solutions studied similar, although small, deviations from ideality, which correlate with the electrochemical behavior. Finally, a series of solid solutions of the composition KNi(0.5)(II)Cu(0.5)(II)[Fe(III)(CN)(6)](1-x)[Co(III)(CN)(6)](x), where both the nitrogen- and carbon-coordinated metal ions are mixed populated and were synthesized and characterized. These are the first examples of solid solutions of metal hexacyanometalates with four different metal ions, where both the nitrogen- and the carbon-coordinated sites possess a mixed population.     

Complex Formation Equilibria and Molecular Structure of Divalent Metal Ions–Vitamin B3–Glycine Oligopeptides Systems

Complex formation of divalent transition metal ions (copper(II), cobalt(II) and nickel(II)), vitamin B3 (nicotinic acid) and glycine oligopeptides (glycine, glycylglycine, glycyl-l-phenylalanine, and glycylglycylglycine) were studied at 298 K in aqueous solutions using the pH-potentiometric technique. The copper Cu(II), cobalt Co(II), and nickel Ni(II) complexing capacity of vitamin B3 in the absence and in the presence of glycine peptides and their overall stability constants in aqueous solutions were obtained and explained by the HYPERQUAD 2008 program using the potentiometric data. From the protonation and complex formation constants, representative complex species distribution diagrams were obtained using HYSS 2009 software. The UV–Vis spectroscopic, cyclic voltammeteric and conductometric titration measurements were carried out to give qualitative information about the conformation of the complexes formed in these solutions and their stoichiometric ratios. The Gibbs energies and the molecular structures of the complexes were evaluated and predicted using Gaussian 09 software molecular modeling and density functional theory calculations.     

Biosorption of heavy metals on Aspergillus fumigatus immobilized Diaion HP-2MG resin for their atomic absorption spectrometric determinations

A solid phase extraction procedure based on biosorption of copper(II), lead(II), zinc(II), iron(III), nickel(II) and cobalt(II) ions on Aspergillus fumigatus immobilized Diaion HP-2MG has been investigated. The analytical conditions including amounts of A. fumigatus, eluent type, flow rates of sample and eluent solutions were examined. Good recoveries were obtained to the spiked natural waters. The influences of the concomitant ions on the retentions of the analytes were also examined. The detection limits (3sigma, N = 11) were 0.30 μg l⁻¹ for copper, 0.32 μg l⁻¹ for iron, 0.41 μg l⁻¹ for zinc, 0.52 μg l⁻¹ for lead, 0.59 μg l⁻¹ for nickel and 0.72 μg l⁻¹ for cobalt. The relative standard deviations of the procedure were below 7%. The validation of the presented procedure is performed by the analysis of three standard reference materials (NRCC-SLRS 4 Riverine Water, SRM 1515 Apple leaves and GBW 07605 Tea). The procedure was successfully applied for the determination of analyte ions in natural waters microwave digested samples including street dust, tomato paste, black tea, etc.     

Extraction of nonferrous metals by bisacylated diethylenetriamine

Bisacylated diethylenetriamine (BAD) with an α,α′ branched substituent has been synthesized. Conditions for the extraction of copper(II), cobalt(II), nickel(II), zinc(II), and iron(III) chlorides from hydrochloric, chloride, and ammoniac solutions have been studied. The protonation constants of the extractant and the concentration constants of metal extraction have been calculated. The extraction in the pH range of 2–10 has a coordination mechanism; at hither acidities, the extraction occurs via ion exchange.     

Microdetermination of Mn, Fe, Co, Ni, Cu, Zn, Ag, Cd, Hg, Pb, Bi and U in inorganic and organometallic compounds with morpholinium morpholine-N-dithiocarboxylate

The chelates of morpholinium morpholine-N-dithiocarboxylate with manganese(II), iron(II), iron(III), cobalt(II), nickel, copper(II), zinc, silver, cadmium, mercury(II), lead, bismuth and uranium(VI) have been prepared and their compositions elucidated. Simple, accurate and relatively rapid procedures for the gravimetric and titrimetric microdetermination of these metals in inorganic and organometallic compounds are presented.     

Metal ion capillary zone electrophoresis with direct UV detection: Separation of metal cyanide complexes

Mixtures of cyanide complexes of iron(III), copper(I), iron(II), nickel(II), chromium(III), mercury(II), palladium(II), silver(I), cadmium(II), zinc(II), cobalt(II), and cobalt(III) have been separated by capillary zone electrophoresis using a fused silica capillary and 20 mM phosphate buffers containing 1–2 mM sodium cyanide. The complexes were detected by direct UV absorpticn at 214 nm; detection limits are in the mid ppb range for all metals except cadmium and zinc. The different detectability of various metal cyanide complexes enables the application of the method to the analysis of complex matrices such as cyanide plating bath solutions.     

Syntheses,Characterization and Anti-inflammatory Activity of a Benzamide Derivative and its Metal Chelates

N-Phenylbenzamide-2,2′-dicarboxylic acid (PBDA) and its copper(II), nickel(II), cobalt (II), zinc(II) and manganese(II) chelates have been synthesized and characterized by their physical measurements, infrared and electronic spectra and magnetic moment data. In an acute anti-inflammatory test, the cobalt chelate was most active (31.1% inhibition) followed by the zinc and copper chelates, whereas the copper chelate (22.3% inhibition) was most active in an adjuvant arthritis test. Again the cobalt chelate was most active in the cotton-wad granuloma test. Gastric irritancy was markedly reduced after chelation by copper, followed in order by zinc, cobalt, manganese and nickel chelates. © 1997 John Wiley & Sons, Ltd.     

Stability constants of some metal dithizonates

The overall stability constants of electroneutral dithizonates of bismuth, cadmium, cobalt(II), copper(II), iron(II), lead(II), manganese(II), mercury(II), nickel, palladium(II), silver, tin(II) and zinc were determined by means of stoichiometric dilution in aqueous solution stabilized by hydroxylamine hydrochloride, at pH 5.50-10.02. Stability constants of complexes ML of bivalent metals were determined under similar conditions but with an excess of metal.     

Metal exchange reaction of magnesium octaphenyltetraazaporphyrin with copper,cobalt, and zinc chlorides in DMSO and DMF

Metal exchange reaction of (octaphenyltetraazaporphyrinato)magnesium(II) with copper, cobalt, and zinc chlorides in dimethyl sulfoxide and dimethylformamide has been studied by spectrophotometry. Kinetic and thermodynamic parameters of the process have been determined, and a probable reaction mechanism has been proposed. Zinc(II), copper(II), cobalt(II), and cobalt(III) complexes of octaphenyltetraazaporphyrin have been isolated and characterized.     

Solvent extraction of antimony(v) with ethyl acetate

A method has been derived for the selective extraction of antimony(V) from hydrochloric acid solution with ethyl acetate. The method can be employed for the rapid determination of antimony in antimonates of lead, tin, mercury, nickel and chromium and in type metal. Iron(III), cobalt(II) cadmium(II), and large amounts of copper(II) and tin(II) interfere with the extraction. For the analysis of type metal, tin must be oxidized to the tetravalent state.