Liquid/liquid extraction separation of hafnium with amberlite La-1 from zirconium and other elements in citric acid solutions

Hafnium (10–110 μg ml^?1) is quantitatively extracted at pH 4.5 from 0.01 M citric acid with 0.1 M Amberlite LA-1 in xylene; it can be stripped with 0.1 M perchloric acid and determined spectrophotometrically with xylenol orange at 540 nm. Hafnium can be separated from binary and multicomponent mixtures by selective extraction and back-extraction. The method is suitable for determining hafnium in zircon.     

Extraction and Spectrophotometric Determination of Zirconium(IV)

Abstract

A sensitive and selective method for the extraction and spectrophotometric determination of Zr(IV) with N-p-chlorophenyl-3,4-,5-trimethoxycinnamohydroxamic acid (PTCHA) has been developed. The binary complex of Zr(IV)-PTCHA is extracted from 2–6 M HCl into chloroform, having a maximum absorbance at 385 nm; molar absorptivity 2.1 × 10⁴ 1 mol^?1 cm^?1. A ternary complex with xylenol orange (Zr-PTCHA-XO) have been studied in chloroform-ethanol media, which absorbs at 540 nm; molar absorptivity 4.3 × 10⁴ 1 mol^?1 cm^?1. The present method is applied for the analysis of zirconium in standard samples.     

Liquid-liquid extraction of zirconium from hafnium and other elements with dicyclohexyl-18-crown-6

Zirconium was quantitatively extracted with 2.5 × 10^?2 M dicyclohexyl-18-crown-6 in dichloromethane from 8.5 M hydrochloric acid. It was stripped with 0.5 M hydrochloric acid and was determined spectrophotometrically as its complex with Arsenazo III. Hafnium was not extracted under these conditions, but from the residual aqueous phase it was extracted with 7.0 × 10^?2 M dicyclohexyl-18-crown-6 in dichloromethane from 9.0 M hydrochloric acid. It was stripped with 0.1 M perchloric acid and determined spectrophotometrically at 540 nm as its complex with xylenol orange. The separation of zirconium and hafnium from other metals is also described.     

Kinetic Analysis of Cobalt in Veterinary Products

A novel kinetic method for the determination of trace amounts of Co(II) has been developed. The proposed method based on the catalytic effect of Co(II) on the oxidation of xylenol orange tetra sodium salt by H₂O₂ in the presence of cationic surfactant (N‐dodecylpyridinium chloride). Co(II) at μg.mL^?1 was determined spectrophotometrically by measuring the decrease in the absorbance of xylenol orange at 577 nm by the differential method. The method is precise, selective, and sensitive. The detection limit of the procedure was 0.058 μg.mL^?1. The relative standard deviation for the replicate determination (n = 6) of 0.7 μg.mL^?1 was 1.285%. The results compared satisfactorily with those of atomic absorption spectrometry. The method was successful for the analysis of Co(II) in veterinary and synthetic samples.     

Chelate formation of zirconium with xylenol orange and semi-xylenol orange

The composition, formation constants, and molar absorptivities of the chelates of zirconium ion wtih xylenol orange and semi-xylenol orange are investigated spectrophotometrically in strong acid medium at ionic strength 3.0 (NaClO₄ and HClO₄). The data obtained were processed with a newly-constructed computer program and with LETAGROP/SPEFO. In the zirconium—xylenol orange system, Zr · H₃ L, Zr· H₄L, and Zr₂ · L are present with logarithmic overall formation constants of 37.80, 38.68, 43.47, and molar absorptivities of 3.10 × 10⁴ (485 nm), 5.98 × 10⁴ (528 nm), 9.50 × 10⁴ (551 nm) I mol^-1 cm^-1, respectively. The chelates Zr · L and Zr · HL were found in the zirconium—semi-xylenol orange system with logarithmic overall formation constants of 26.25 and 27.56, and molar absorptivities of 5.70 × 10⁴ (532 nm) and 8.30 × 10⁴ (535 nm) 1 mol^-1 cm^-1, respectively. Semi-xylenol orange is more sensitive and reliable than xylenol orange as a spectrophotometric reagent for zirconium.     

The Use of Zirconyl Xylenol Orange for the Post-Column Spectroscopic Detection of Fluoride in Ion Chromatrography

Abstract

A simple post column reaction detection system for fluoride is presented using the decolorization of the zirconyl xylenol orange complex. A 3[sgrave] detection limit of 0.05 μg F^? mL^?1 was achieved with a linear calibration function up to 10 μg F^? mL^?1. The methodology is suitable for the determination of F^? in potable water and some interferences studies were conducted with common cations namely Ca, Mg, Al and Fe(III).     

Quantitative complexometric determination of mercury(II) in synthetic alloys and complexes using 2-thiazolinethiol as a masking agent

A simple, rapid and selective complexometric method is proposed for the determination of mercury(II). Mercury(II) and other related metal ions are first complexed with an excess of EDTA and the surplus EDTA is back-titrated with a standard lead nitrate solution at pH 5.0–6.0 (hexamine buffer) using xylenol orange as an indicator. A 0.2% solution of 2-thiazolinethiol in acetone is then added to displace EDTA from the Hg(II)-EDTA complex. The released EDTA is titrated with a standard lead nitrate solution as before. Reproducible and accurate results are obtained in the range of 0.8 g l^?1?15.8 g l^?1 of mercury with a relative error less than ±0.25% and a coefficient of variation (n = 6) not higher than 0.28%. The interference of various ions was studied and the method was employed for the analysis of mercury in its synthetic alloy mixtures and in complexes.     

Rapid photometric determination of neptunium with xylenol orange after extraction with Aliquat-336

A rapid method based on the extraction of neptunium(IV) by Aliquat-336 followed by its direct photometric determination in the organic phase employing xylenol orange is reported. Optinum conditions have been established for the extraction and determination of as little as 0.4 ppm of Np. The molar absorptivity of the red-coloured neptunium complex at 535 nm is 49535±361 1·mol⁻¹·cm⁻¹. Unlike the well-known absorptimetric method for estimating NP(IV) with Arsenazo III, this method tolerates many-fold excesses of fluoride, nitrite, nitrate, phosphote, oxalate as well as UO ₂ ²⁺ , Pu⁴⁺, Zr⁴⁺, etc., which are some of the major contaminants associated with neptunium during its reprocessing.     

Potentiometric and spectrophotometric flow-injection determinations of metal ions with use of metal ion buffers

Potentiometric and spectrophotometric flow-injection determinations of metal ions, based on metal ion buffers, are described. A copper(II) ion-selective electrode and copper(II) ion buffers containing nitrilotriacetic acid (NTA) or ethylenebis(oxyethylenedinitrilo)tetraacetic acid (EGTA) are used for determination of ca. 10^?3 M transition metal ions or of calcium in the presence of magnesium. Spectrophotometric determination of transition metal ions is achieved by using a zinc ion buffer solution containing NTA and xylenol orange as indicator. Zinc concentrations up to 2 M can be determined by using large dispersion in the manifold. The factors influencing the sensitivity of the proposed methods are discussed.     

Complex formation of zirconium and hafnium with xylenol orange

The factors affecting the formation of zirconium and hafnium complexes of xylenol orange (XO) in perchloric acid have been examined. The optimum acid concentration for both systems is in the range 0.2–0.5 M HClO₄. When excess of metal is present, an initial complex with (XO) : metal ratio of 1 :1 is formed; this complex then undergoes an acid-dependent reaction, taking approximately 2 h to reach completion. Rate constants for this reaction have been determined. When excess of xylenol orange is present (i.e.(XO) : metal ? 2) a 2 :1 complex is formed which does not undergo further reaction. Extinction coefficients are given for the various complexes.     

A novel method of synthesizing solid phase adsorbent silica modified with xylenol orange: application for separation, pre-concentration and determination of uranium in calcium rich hydro-geochemical samples and sea water—Part 1

A novel, single-step route has been developed for the synthesis of solid phase adsorbent silica modified with xylenol orange. The addition of cationic surfactant cetyl tri-methylammonium bromide during the synthesis of the adsorbent supports the formation of a stable coating of xylenol orange on silica. The adsorbent showed no signs of degradation in contact with organic solvents and with solutions of varying pH between 1 and 9. This adsorbent has been used for separation and pre-concentration of uranium from hydro-geochemical samples with high calcium content and from sea water. Quantitative sorption of uranium was observed above pH 3 and complete desorption can be achieved using 0.2 M sodium pyrophosphate solution. The uranium content in the extract was determined by laser fluorimetric technique. The equilibration time is 30 min. The sorption capacity of the adsorbent for uranium is 10 mg g^?1. An enrichment factor of 50 was obtained by this procedure taking 500 mL of sample solution. Uranium concentrations down to 0.05 ng mL^?1 can be determined after pre-concentration using this method. The relative standard deviation at an 0.1 ng mL^?1 level is ±15%.     

A thermometric titration study of the interaction of Al3+, Co2+, Ni2+ and Zr4+ with xylenol orange

A thermometric titrimetry study of the interaction in aqueous solution of A1³⁺, Co²⁺, Ni²⁺ and Zr⁴⁺ with xylenol orange has revealed in each case a linear reaction heat/[Mⁿ⁺] relationship at a specified pH, thereby suggesting the potential of metallochromic indicators for the analytical determination of these metals in water. The effect of pH on the reaction heat is investigated and is interpreted in terms of the ability of these metal cations to complex with the known xylenol orange species existing at the various pH studied. An interference study, involving transition and non-transition metal ions, is also reported and the interference effect, as measured by the deviation ofQ/Q from unity (Q andQ are the relevant reaction heats in the presence and absence of interfering ion), is partially explained in terms of the coordination numbers, relative sizes and crystal field stabilization energies of the cations studied and the known behaviour of xylenol orange in aqueous solution.     

Extraction-Spectrophotometric Determination of Fluoride Using N-Phenylbenzohydroxamic Acid

Abstract

Fluoride gives a very stable complex with scandium and, hence, by determining the unreacted scandium, the fluoride content can be calculated. Excess scandium is reacted with an ethanolic solution of N-benzoylphenylhydroxylamine (BPHA) at pH 6.0, and the scandium-BPHA complex is extracted into isoamyl alcohol. Scandium is determined spectrophotometrically after adding xylenol orange. Beer's law for fluoride is obeyed in the range of 0.05 –1.5 ppm; the molar absorptivity is 1.94×10⁴ 1 mol^?1 at 565 nm. The procedure is applicable for the determination of fluoride in various types of samples.     

A comparative study of different extraction systems for the spectrophotometric determination of potassium with 18-crown-6

A comparative study on the extractive-spectrophotometric determination of potassium with 18-crown-6 employing different colored counterions and organic extraction solvents is described.Extraction systems using methyl orange/chloroform, bromcresol purple/chloroform and bromcresol green/benzene demonstrated good preliminar features for such purpose and are studied in detail. Analytical performance characteristics including: sensitivity, selectivity, precision, linearity, etc. are given for each method. The main disadvantage of this type of determinations is the lack of reproducibility. Some explanations to this fact are discussed.A new method for the determination of trace amounts of potassium based on its extraction into chloroform with 18-crown-6 and methyl orange is proposed. The linear working range goes from 0.5 to 7 ppm of potassium, the apparent molar absorptivity being 8.8 × 10³ liters mol^?1 · cm^?1, and the precision, expressed in terms of relative standard deviation, of ±4.6%.     

Formation and Extraction of Niobium(V) Complex with Xylenol Orange in the Presence of a 4-Pyridone Derivative

Xylenol orange (XO) is a suitable reagent for the spectrophotometric determination of niobium in a weakly acidic medium. The present study shows that the addition of 3-hydroxy-2-methyl-1-phenyl-4-pyridone (HX) influences the complex formation as well as the spectroscopic properties of this colored system. To prevent formation of niobium(V) hydrolyzed species in water, tartaric acid was used when preparing the niobium stock solution. The red-violet colored complex formed by heating niobium(V) with xylenol orange (XO) in the presence of HX at pH=3 has a maximum absorption wavelength at 565 nm. The complex can be extracted by a chloroform solution of tetraphenylphosphonium (TPP) chloride. The optimum reaction conditions and other parameters for complex formation have been evaluated. The mechanism of extraction is probably based on the formation of the associated ion pair between the tetraphenylphosphonium cation and the mixed Nb(V)-XO-HX anion. The extracted complex in chloroform showed a maximum absorbance at 585 nm with the corresponding molar absorption coefficient being 3.72×10⁴ L⋅mol⁻¹⋅cm⁻¹, and obeys Beer’s law in the range 3×10⁻⁶ to 3×10⁻⁵ mol⋅L⁻¹.     

Flow-Injection Determination of Iron Based on Its Catalysis on the Oxidation Reaction of Xylenol Orange by Potassium Bromate

A flow injection system is proposed for catalytic kinetic spectrophotometric determination of trace iron(II + III). The involved reaction is based on the catalytic effect of iron(III) on oxidation reaction of xylenol orange by potassium bromate to form a blue-violet complex. Iron(II) is also determined, being oxidized to iron(III) by potassium bromate. The calibration graph is linear in the range of 0.02–10.0 µg l^?1 and 10.0–1100 µg l^?1. The relative standard deviation is 1.5% for 4.0 µg l^?1 iron(III) and 2.3% for 60.0µg l^?1 iron(III) (n = 11). The presented system was applied successfully to the determination of iron in natural waters.     

Studies on reaction of reduced lipoic acid with Mukaiyama reagent and its application for pharmaceutical and food analysis

A new sensitive method for the determination of lipoic acid (LA) in selected food items based on its reaction with Mukaiyama reagent (2-chloro-1-methylpyridinium iodide, CMPI) was developed. It was stated that CMPI reacts with reduced form of lipoic acid (dihydrolipoic acid, DHLA) and the stable product is produced. The spectrum of the labeled form of DHLA exhibits new band at 312?nm. Based on its spectral characteristics new spectrophotometric and UV–high-performance liquid chromatography (HPLC) methods of LA determination were elaborated. Both methods allowed determination of the analyte in the concentration range of 5?×?10^?6–1?×?10^?4?mol?L^?1 with limit of detection 0.39?×?10^?6 and 0.77?×?10^?6?mol?L^?1 for spectrophotometric and HPLC method, respectively. The practical usability of newly developed methods was checked by determination of lipoic acid contents in its pharmaceutical preparate Revitanerw. The proposed method was precise and accurate. The relative error of determination did not exceed ±0.067%. As chromatographic method allowed the determination of analyte in the presence of complex matrix, it was applied for assay of free fraction of α-lipoic acid in selected food items. A procedure of LA isolation from biological matrix was developed. The extraction with dichloromethane allowed quantitative recovery at 102.94?±?4.20%. The green barley appeared to be the richest source of LA.     

Determination of gold in geological samples by x-ray fluorescence spectrometry after extraction with tributyl phosphate

The behaviour of gold and elements impeding its x-ray fluorescence spectrometric (XRF) determination, namely zinc, lead and arsenic, was studied during their extraction from hydrochloric acid, nitric acid, and aqua regia solutions using tributyl phosphate as a solid extractant [SE(TBP)]. Extraction of gold from pulps after aqua regia leaching was found to be the most favourable approach for the quantitative and selective recovery of gold. The gold distribution ratio, D_Au, is ca. 10⁴ ml g^?1. For extraction from hydrochloric acid solutions the D_Au value also exceeds 10⁴ in the whole range of gold concentrations studied (10^?8?10^?4 M), but it decreases substantially with increasing extraction temperature, from 5 × 10⁵ ml g^?1 at 20°C to 9 × 10³ ml g^?1 at 70°C. An anomalously high distribution ratio of lead, D_Pb ≈ 10³ ml g^?1, was observed during extraction from hydrochloric solutions in the presence of chlorine. This could be explained by the formation of the chloro complexes of lead(IV). An XRF method for the determination of gold in natural samples was developed, which includes back-extraction of gold from SE(TBP) using a hot 0.025 M thiourea solution, providing a thin sample layer for secondary XRF. For 25 g of sample material the limit of determination is 10 ng g^?1 (10^?6%). The accuracy of the technique was checked using different reference materials. The results agreed within 10%.     

Analytical applications of mixed-ligand complexes: II. Determination of hydrogen peroxide in the presence of perioxide derivatives

The mixed ligand complex TiXOH₂O₂ was found suitable for the determination of small amounts of hydrogen peroxide in the presence of peroxy acids of sulfur. The pH optimum for the determination depends on the concentrations of the reagents [titanium (IV) and xylenol orange]: for 2 × 10^?4M titanium (IV) and XO the optimum pH is 1.25. ?⁵²⁰ = 13,200 M^?1 cm^?1. The method is suitable for determination of 4–40 μM H₂O₂. Mention is made of the possible causes of the contradictions to be found in the literature concerning the ternary complex.     

Determination of cerium in ferrous alloys

A method for the determination of cerium in ferrous alloys is described. Cerium (with lead and bismuth) is separated from other elements by anion exchange in a medium consisting of 95% methanol and 5% 5 N nitric acid; cerium alone is tlien eluted with 90% methanol-10% 6 N hydrochloric acid and determined in the eluate by titration with EDTA to xylenol orange indicator. Application of the method to several steel samples was successful.