The role of ceric ion in vinyl polymerization and graft copolymerization

Six kinds of new ceric ion redox initiation systems for vinyl radical polymerization and two kinds of macromolecule graft copolymerization by ceric ion have been briefly reviewed in this paper. The initiators include ceric ion/acetanilide, ceric ion/alkyl phenylcarbamate, ceric ion/4-methoxysuccinyltoluidine, ceric ion/aliphatic aldehyde, ceric ion/aromatic aldehyde, ceric ion/diketone systems. Macromolecules such as poly(ether-urethane) and macromolecules having active pendant groups were selected for graft copolymerization with acrylamide initiated by ceric ion.     

Highly branched acrylamide graft copolymer

Acrylamide graft copolymerization onto poly(3-O-methacryloyl D -glucose) (PMG) as a backbone was performed by the ceric ion method. The number of polyacrylamide (PAM) chains grafted was dependent upon the concentration ratio of the redox catalyst system at constant acid concentration and increased in proportion to the ceric ion concentration. A maximum number of grafts obtained, for example, was 29 onto PMG (DP = 244) under the conditions [Ce⁴⁺]/[PMG] = 1/5, [H⁺] = 1.0 × 10^?2 mole/l. In other words, the graft frequency was 12 per 100 monomer units of PMG. Such a high frequency of the grafts was, however, greatly decreased when the acid concentration was increased. Characteristics of the highly branched structure were revealed by the relationship between intrinsic viscosity and graft frequency, which showed a downward curvature with the increasing graft frequency. Influences of acid and ceric ion concentrations on the copolymerization were kinetically evaluated. The rate of polymerization was found to be first-order with respect to ceric ion and proportional to the square of the reciprocal acid concentration. The result suggests that the graft frequency is dependent upon the rate of polymerization.     

Vinyl polymerization initiated by ceric ion reducing agent systems in sulfuric acid medium

Polymerization of the monomers, methyl acrylate (MA) and methyl methacrylate (MMA) was carried out in sulfuric acid medium at 15°C. With the redox initiator system, ceric ammonium sulfate–malonic acid. There was no induction period, and a steady state was attained in a short time. There was found to be no polymerization even after 1 hr. in the absence of the reducing agent R. The initiation was by the radical produced from the Ce⁴⁺–malonic acid reaction. The rate of monomer disappearance was proportional to [M]^1.5, [R]^0.5, and [Ce⁴⁺]^0.3–0.5, and the rate of ceric disappearance was directly proportional to [R] and [Ce⁴⁺]. Chain lengths of the polymers were directly proportional to [M] and inversely to [R]^1/2 and [Ce⁴⁺]^1/2. The experimental results were explained by a kinetic scheme involving the following steps: (a) oxidation of the substrate to give the primary radical which reacts with Ce⁴⁺ to give the products, (b) initiation by the primary radical, (c) propagation, and (d) termination of the growing polymer radicals by the mutual type. For the polymerization of acrylonitrile (AN) by the redox system, ceric ammonium sulfate–cyclohexanone (CH), in sulfuric acid at 15°C., the scheme was modified to include linear type of termination by Ce⁴⁺, along with the mutual termination to explain the results especially under conditions with [Ce⁴⁺] ≥ [CH].     

丙烯酰胺在炭黑表面接枝聚合研究

利用Ｃｅ＾４＋和羟甲基化炭黑组成的氧化还原引发体系，探讨了丙烯酰胺在炭黑表面的自由基水溶液接枝聚合机理。研究表明：单体浓度、硝酸浓度和铈盐用量直接影响丙烯酰胺在炭黑表面的接枝聚合，ＦＴＩ和ＴＥＭ分析证明：改性炭黑表面存在着聚丙烯酰胺。改性炭黑粒子的Ｚｅｔａ电位值与未改性炭黑粒子相同，但它与水组成的分散体具有极好的分散稳定性。     

Synthesis and Characterization of Water-Soluble Graft Copolymers from 2, 3-Dihydroxypropylcellulose and Acrylamide

Water-soluble 2,3-dihydroxypropylcellulose-polyacrylamide graft copolymers (DHPC-g-PAM) were prepared by Ce⁴⁺ ion-initiated graft copolymerization of acrylamide (AM) onto 2,3-dihydroxypropylcellulose (DHPC) dissolved in dilute nitric acid at room temperature under argon. The ratios of the concentration of Ce⁴⁺ ion to the concentration of DHPC were shown to affect the number and the length of the polyacrylamide grafts. The average number of grafts per chain was determined by acid-catalyzed degradation of the cellulose backbone and was found to be consistent with the presence or absence of free DHPC in the polymerization product prior to hydrolysis. The average number of grafts per DHPC molecule was found to be 2.7 or less depending on the reaction conditions.     

Encapsulation of silica nanoparticles by redox-initiated graft polymerization from the surface of silica nanoparticles

This study describes a facile and versatile method for preparing polymer-encapsulated silica particles by ‘grafting from’ polymerization initiated by a redox system comprising ceric ion (Ce⁴⁺) as an oxidant and an organic reductant immobilized on the surface of silica nanoparticles. The silica nanoparticles were firstly modified by 3-aminopropyltriethoxysilane, then reacted with poly(ethylene glycol) acrylate through the Michael addition reaction, so that hydroxyl-terminated poly(ethylene glycol) (PEG) were covalently attached onto the nanoparticle surface and worked as the reductant. Poly(methyl methacrylate) (PMMA), a common hydrophobic polymer, and poly(N-isopropylacrylamide) (PNIPAAm), a thermosensitive polymer, were successfully grafted onto the surface of silica nanoparticles by ‘grafting from’ polymerization initiated by the redox reaction of Ce⁴⁺ with PEG on the silica surface in acid aqueous solutions. The polymer-encapsulated silica nanoparticles (referred to as silica@PMMA and silica@PNIPAAm, respectively) were characterized by infrared spectroscopy, thermogravimetric analysis, and transmission electron microscopy. On the contrary, graft polymerization did not occur on bare silica nanoparticles. In addition, during polymerization, sediments were observed for PMMA and for PNIPAAm at a polymerization temperature above its low critical solution temperature (LCST). But the silica@PNIPAAm particles obtained at a polymerization temperature below the LCST can suspend stably in water throughout the polymerization process.     

Graft Polymerization of Vinyl Monomers Onto Carbon Black by Use of the Redox System Consisting of Ceric Ions and Carbon Black Carrying Alcoholic Hydroxyl Groups

The radical graft polymerization of vinyl monomers onto carbon black initiated by a redox system consisting of ceric ion and carbon black having alcoholic hydroxyl groups was investigated. The introduction of alcoholic hydroxyl groups onto the carbon black surface was achieved by the reaction of carbon black with alcoholic hydroxyl radicals, formed by the reaction of alcohol with benzoyl peroxide. The rate of the polymerization of acrylamide (AAm) initiated by the redox system was found to increase in the following order of hydroxyl groups: 1-hydroxyoctyl < 1-hydroxypropyl < 1-hydroxyethyl < hydroxymethyl < 1-hydroxy-1-methylethyl. In the redox polymerization, poly-AAm was effectively grafted onto carbon black by propagation of the polymer from the radical formed by the reaction of ceric ions with the alcoholic hydroxy groups. The percentage of grafting increased with increasing conversion. By use of this redox system, poly(acrylic acid), polyacrylonitrile, and poly(N-vinyl-2-pyrrolidone) could be grafted onto carbon black, but poly(methyl methacrylate) and polystyrene could not be so grafted. The graft polymerization of AAm by use of a redox system consisting of ceric ion and PVA-grafted carbon black was also investigated.     

VINYL RADICAL POLYMERIZATION INITIATED WITH CERIC ION AND N-(SUBSTITUTED PHENYL) ACETAMIDE SYSTEMS

The polymerization of acrylamide (AAM)in H_2O/DMF or in H_2O/CH_3CN mixed solvent initiated with ceric ion (Ce~(4+) )/N-(substituted phenyl)-acetamide systems have been studied. The redox polymerization was revealed by the low value of overall activation energy (E_α) of AAM polymerization using ceric ion/N-(substituted phenyl) acetamide system as an initiator. The end group of polymer formed was detected by IR spectrum analysis method, it revealed the presence of N-(m-acetoxy-methylphenyl) acetamide (m-AAe) moiety end group in the polymer obtained with ceric ion/m-AAe initiation system.     

Aqueous Polymerization of Acrylamide Initiated by Glycolic Acid/Ce4+ Redox System

The aqueous polymerization of acrylamide initiated by the glycolic acid/Ce⁴⁺ redox system was studied in sulfuric acid medium at 35 ± 0.2°C under a nitrogen atmosphere. The initiation was carried out by the free radical generated in the decomposition of the complex formed between the oxidant and the reductant. The monomer disappearance was found to be proportional to [GA]^0,89[Ce⁴⁺]^0.57[M]^1.0, and the rate of ceric ion disappearance was found to be directly proportional to [Ce⁴⁺] and [GA] but independent of [M]. The activation energy of the system was found to be 7.21 kcal/deg/mol. The molecular weight of polyacrylamide increased with increasing [monomer] and decreased with increasing [catalyst]. The effect of pH was also studied in the pH range 2.22 to 1.44.     

Ce4＋－Ce3＋循环体系引发淀粉与丙烯酰胺接枝共聚合反应动力学研究

The cyclic initiating system of Ce⁴⁺ - Ce³⁺ - Ce⁴⁺, in which the product of reduced ion Ce³⁺ forming from Ce⁴⁺ after initation being oxidized again to the original oxidizing ion Ce⁴⁺ is examined. The characters of process of the graft copolymerisation using the cyclic initiating system is compared with the ones using ceric and persulphate individually. When using the cyclic systerm as initator, it was more effective to graft polymerise acylamide onto starch and a rather high proportion of graft copolymer was made as opposed to using persulphate individually.     

Graft copolymerization ofN‐vinyl‐pyrrolidone and acrylamide on cellulose derivatives: synthesis,characterization and study of their biological effect

Graft copolymers of carboxymethyl cellulose and hydroxyethyl cellulose with N‐vinyl‐2‐pyrrolidone and acrylamide have been synthesized by grafting copolymer of N‐vinyl‐2‐pyrrolidone and acrylamide onto a mixture of carboxymethyl cellulose and hydroxyethyl cellulose by a solution polymerization technique using a redox initiation system. The graft copolymers were characterized by ¹³C‐NMR spectroscopy and scanning electron microscopy. These graft copolymers have been tested for their biodegradability and biological activity. None of the graft copolymer solutions shows any microbial degradation up to 10 days. The reported results are evidence of the possibility of anti‐fungi effect. Copyright © 2002 John Wiley & Sons, Ltd.     

Graft polymerization kinetics of acrylamide initiated by ceric nitrate–dextran redox systems

The kinetics of the graft polymerization of acrylamide initiated by ceric nitrate—dextran polymeric redox systems was studied primarily at 25°C. Following an initial period of relatively fast reaction, the rate of polymerization is first-order with respect to the concentrations of monomer and dextran and independent of the ceric ion concentration. The equilibrium constant for ceric ion—dextran complexation K is 3.0 ± 1.6 l./mole, the specific rate of dissociation of the complex, k_d, is 3.0 ± 1.2 × 10^?4 sec.^?1, and the ratio of polymerization rate constants, k_p/k_t, is 0.44 ± 0.15. The number-average degree of polymerization is directly proportional to the ratio of the initial concentrations of monomer and ceric ion and increases exponentially with increasing extent of conversion. The initial rapid rate of polymerization is accounted for by the high reactivity of ceric ion with cis-glycol groups on the ends of the dextran chains. The polymerization in the slower period that follows is initiated by the breakdown of coordination complexes of ceric ions with secondary alcohols on the dextran chain and terminated by redox reaction with uncomplexed ceric ions.     

Polymerization of Methacrylamide Initiated by Ceric Ion-Citric Acid Redox System

Homogeneous polymerization of methacrylamide initiated by the ceric ammonium sulfate-citric acid (CA) redox pair has been investigated and reported at 35 ± 0.2°C under nitrogen atmosphere. The initiation was caused by the free radical generated by the decomposition of the complex formed between ceric ion and citric acid. The rate of monomer disappearance was found to be proportional to [CA]^0.4, [Ce^0.4+]^0.65, and [Monomer]¹ The rate of ceric ion disappearance was directly proportional to the ceric ion concentration but independent of the monomer concentration. The initial rate was independent of [H₂SO₄]. The activation energy of the system was found to be 21.4 kJ/mol.     

二过碘酸合银(II)氧化还原引发丙烯酸甲酯在尼龙1010上接枝共聚合反应的研究

二过碘酸合银（ＩＩ）氧化还原引发丙烯酸甲酯在尼龙１０１０上接枝共聚合反应的研究刘盈海刘卫宏赵敏孟劲功（河北大学化学系保定０７１００２）关键词二过碘酸合银（ＩＩ）钾，尼龙１０１０，氧化还原引发，丙烯酸甲酯，接枝共聚目前Ｃｅ（ＩＶ）被认为是一种十分...     

RADICAL GRAFTING REACTIONS ONTO STARCH AND OTHER WATER-SOLUBLE COPOLYMERS IN ISOLATED GEL DROPLETS

A novel radical grafting copolymerization process has been designed for water-soluble polymers which avoids the problems of conducting grafting reactions in highly viscous polymerization media. A variety of water-soluble graft copolymers having starch or dextran as the backbone chain with grafted side chains of polyacrylamide (—AM—), poly (acrylic acid ) (—AA—), poly (acrylamide-co-acrylic acid) (—AM—NH_4AA—) or poly ( acrylamide-co-2-acryiamido-2-methyl-l-propanesulphinic acid) (—AM—AMPS—) have been synthesized in gel droplets using aceric sulphate redox initiator, and their properties compared. The reaction conditions were optimized taking into account reaction kinetic data and the observed properties of the products produced under different reaction conditions. The effects of the ratios of [backbone]/[graft monomer], [ AM]/[ AA]/[AMPS] , [Ce~(4+)]/[ S_2O_8=] and pH value on the reaction rate , conversion, grafting degree, grafted chain length and the product molecular weight have been investigated.     

Controlled grafting of MMA onto cellulose and cellulose acetate

Homogeneous graft copolymerization of methyl methacrylate onto cellulose and cellulose acetate was carried out in various solvents and solvent systems taking ceric ammonium nitrate, tin (II) 2-ethyl hexanoate [Sn(Oct)₂] and benzoyl peroxide as initiators. The effect of solvents, initiators, initiator and monomer concentration, on graft yield, grafting efficiency and total conversion of monomer to polymer were studied. Formation of Ce³⁺ ion during grafting in presence of CAN enhances the grafting efficiency. Methylene blue was used as a homopolymer inhibitor and controlled the molecular weight of the grafted polymer and its effect on grafting was also studied. In presence of MB, amount of PMMA homopolymer formation reduced and consequently grafting efficiency increased. The number average molecular weights and polydispersity indices of the grafted PMMA were found out by gel permeation chromatography. The products were characterized by FTIR and ¹H-NMR analyses and possible reaction mechanisms were deduced. Finally, thermal degradation of the grafted products was also studied by thermo-gravimetric and differential thermo-gravimetric analyses.     

The mechanism of consumption of ceric salt with cellulosic materials

Efforts were made in the present study to elucidate the mechanism of graft copolymerization of cellulose in the presence of a ceric salt as initiator. When cellulose is treated with an aqueous solution of the ceric salt, ceric ion is consumed in a roughly first-order reaction in the oxidation of cellulose and in the adsorption on cellulose, and the ratio of the rate constants of oxidation and adsorption is about 1:3 in the case of sulfite pulp. Ceric ion is adsorbed so strongly on cellulose as not to be readily desorbed by treatment with water, dilute acid, or dilute alkali. The number of moles of adsorbed ceric ion was approximately equal to the number of moles of the total carbonyl groups in the cases of cotton and sulfite pulp, which are low in hemicellulose content, and was several times as large in the cases of kraft pulp and semichemical pulp, which contain about 22% hemicellulose. In these samples, however, it was interesting to note that the amount of the adsorbed ceric ion was roughly equal to the amount consumed in oxidation. Cellulose on which ceric ion is adsorbed reacts with methyl methacrylate to yield graft copolymers; a higher molecular weight of grafts, smaller number of grafts, and lower graft efficiency than in a standard polymerization were observed. Since the stability of the adsorbed ceric ion is high, a contribution of the adsorbed ceric ion to the graft copolymerization appears small, and the oxidation reaction, which proceeds slightly more slowly than adsorption, seems more important to the graft copolymerization.     

Graft copolymers composed of high molecular weight poly(ethylene oxide) backbone and poly(N-isopropylacrlylamide) side chains and their thermoassociating properties

Novel, water-soluble thermoassociative graft copolymers based on high molecular weight (HMW) poly(ethylene oxide-co-glycidol) backbone and relatively short grafts of poly-N-isopropyl acrylamide (NIPAAm) were prepared. The copolymer precursors with two architectures (block and graft) were synthesized using Ca-amide-alkoxide initiators. The OH groups in the copolymer precursors have been utilized for grafting NIPAAm using ceric ion (Ce⁴⁺) redox initiation. The idea was to imprint the “smart” properties of PNIPAAm grafts into common HMW poly(ethylene oxide). The sensitive moieties undergo reversible association transitions by changing the temperature of dilute and semidilute aqueous solutions of the copolymers. Associative properties were studied by viscosity and rheology measurements. Two types of interactions, induced by heating, depending on the copolymer concentration namely intra- and intermolecular association were observed.     

Kinetics of polymerization initiated by Mn3+–substrate redox system. I

The kinetics and mechanism of polymerization of acrylamide (AM) initiated by manganese (III) acetate (MTA)–diglycolic acid (DGA) redox system in aqueous sulfuric acid were studied in the temperature range 20-35°C. The overall rates of polymerization and the disappearance of Mn³⁺ and the kinetic chain lengths of polyacrylamide were determined. The polymerization reaction is initiated by the organic free radical arising from the Mn³⁺–diglycolic acid reaction and the termination is by the metal ions. The rate of polymerization of acrylamide was found to be proportional to the first power of monomer and diglycolic acid and independent of manganese(III) acetate. The various rate parameters were evaluated.     

On some regularities of grafting of vinylpyridine derivatives onto acetyle cellulose

The radical graft copolymerization of vinylpyridine derivatives onto acetyl cellulose was investigated using Fe²⁺/H₂O₂ redox system as an initiator. It was proved that the addition of hydrazine hydrate increased the degree of grafting many times. The reaction mechanism of hydrazine hydrate was also investigated. A. correlation between nitrogen content and the total anion exchange capacity was established. The vinylpyridine derivatives were ordered according to their reactivity. The effects of reaction conditions on the total anion-exchange capacity, the total conversion, the degree of grafting, and the grafting efficiency of the copolymers obtained were examined. The copolymers were characterized by IR and H-NMR spectra, thermogravimetric analysis, elemental analysis, and total anion-exchange capacity.