Chemistry of chromium bis-acetylide complexes

Abstract  

Stable paramagnetic Cr(II) and Cr(III) bis(alkynyl) complexes of the type [trans(RC≡C)₂Cr(dmpe)₂] ⁿ⁺ (R = Ph, SiMe₃, SiEt₃, C≡C–SiMe₃ n = 0, 1) were prepared and characterised by NMR, cyclic voltammetry, EPR, magnetic measurements, and X-ray single-crystal diffraction studies.     

Dissolving the insoluble: CdF<Subscript>2</Subscript> and moist ammonia form cadmium(II) difluoride monohydrate—synthesis and crystal structure of [Cd(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>]F<Subscript>2</Subscript>·H<Subscript>2</Subscript>O

Abstract  

Hexaamminecadmium(II) fluoride monohydrate (1:1) [Cd(NH₃)₆]F₂·H₂O was synthesized from CdF₂ and liquid ammonia in open reaction vessels, so that moisture from the air was in contact with the solvent. The compound crystallizes in the chiral space group P3₁21- (No. 152) in the form of needle-shaped, colorless crystals with a = 6.8974(1) ?, c = 17.7156(5) ?, V = 729.89(3) ?³, and Z = 3.     

Synthesis of 5-spirocyclohexyl-2,4-dithiohydantoin derivatives: a potential anti-leishmaniasis agent

Abstract  

A series of spiro-dithiohydantoins were synthesized by heating a mixture of 5-spirocyclohexyl-2,4-dithiohydantoin potassium salt and 3-chloropropanoyl chloride. These compounds were synthesized and evaluated for their activity against five Leishmanial strains in the promastigote stage in vitro. Seventy-two hours inoculation of a variety of products gave an IC ₁₀₀ and average IC ₅₀ values of 1.25 and 0.376 mg/cm³ against all Leishmanial strains tested.     

Synthesis, characterization, and crystal structural study of the iron(II) 4,4′-bithiazole complex [Fe(C6H4N2S2)3]2+(NO3?)2

Abstract  

The complex [Fe(C₆H₄N₂S₂)₃]²⁺(NO₃⁻)₂ was prepared from the reaction of 4,4′-bithiazole with Fe(NO₃)₃·9H₂O in methanol. It was characterized by IR, UV-Vis, luminescence, ¹H NMR and ¹³C NMR spectroscopy, and X ray crystallography. The structure was solved in the orthorhombic space group P2₁2₁2₁ with a = 12.1500(5), b = 12.8434(6), c = 16.2222(7) ?, V = 2531.43(19) ?³, Z = 4, and with wR ₂  = 0.0897.     

The 3D porous metal-organic framework constructed by Cd(II) with 2-methylimidazole-4,5-dicarboxylic acid

Abstract  

A 3D metal-organic framework, [C₆H₃CdN₂O₄]·NH₄, was synthesized solvothermally and structurally characterized by single-crystal X-ray structure determination. This compound crystallizes in the tetragonal system with the space group P42/nmc. The crystal structure presents a 3D framework and open channels, exhibiting guest-coordination sites at channel walls and strong fluorescent emission.     

Synthesis of arylaminotetrazoles by ZnCl2/AlCl3/silica as an efficient heterogeneous catalyst

Abstract  

Arylaminotetrazoles were efficiently synthesized from secondary arylcyanamides by application of ZnCl₂/AlCl₃/silica as a reusable heterogeneous Lewis acid catalyst. 5-Arylamino-1H-tetrazoles can be obtained from arylcyanamides carrying electron-withdrawing substituents on the aryl ring, while with electron-releasing groups 1-aryl-5-amino-1H-tetrazoles will be produced. The former isomer is also produced within longer reaction times (~20 h) even with electron-releasing groups.     

Application of chloroaluminate ionic liquid as catalyst and medium for the dealkylation of esters

Abstract  

Dealkylation of esters to carboxylic acids was performed using chloroaluminate ionic liquids (PyHBr/AlCl₃, PyHCl/AlCl₃, Me₃NHCl/AlCl₃, Et₃NHCl/AlCl₃) as catalyst and medium. The catalytic activity of PyHBr/AlCl₃ (X(AlCl₃) = 0.67) proved to be superior to the other three ionic liquids for the dealkylation of methyl benzoate with a conversion of 97% after 3 h at 140 °C. After easy separation from the products the ionic liquid PyHBr/AlCl₃ could be reused six times without loss of its activity.     

Synthesis of 3-aryl-4(3H)-quinazolinones from anthranilic acid, ortho esters, and anilines using Ce(CH3SO3)3·2H2O as catalyst

Abstract  

3-Aryl-4(3H)-quinazolinones were synthesized efficiently by the three component one-pot cyclocondensation of anthranilic acid, ortho esters, and anilines in the presence of Ce(CH₃SO₃)₃·2H₂O at room temperature under solvent-free conditions. This method offers several advantages, such as a simple procedure, mild reaction conditions, short reaction time, and reusability of the catalyst.     

Salt flux crystal growth of the titanyl arsenate NaTiO[AsO4]

Abstract  

The titanyl arsenate NaTiO[AsO₄] was synthesized in the form of colourless lath-shaped crystals from arsenic and titanium dioxide in a NaCl/KCl flux at 850 °C. NaTiO[AsO₄] crystallizes with the monoclinic low-temperature form LT-CaTiO[SiO₄], space group P2₁/c. The structure was refined from single crystal diffractometer data: a = 6.7170(9), b = 8.7707(12), c = 7.2447(10) ?, β = 114.77(1)°, wR2 = 0.0559, 789 F ² values, and 74 variables. NaTiO[AsO₄] is characterized by a topology common to a wide range of oxide structures of stoichiometry AMOXO₄. It consists of parallel chains of trans-corner-sharing TiO₆ octahedra, cross-linked by isolated AsO₄ tetrahedra.     

Synthesis,spectral and structural studies of oxovanadium(IV/V) complexes derived from 2-hydroxyacetophenone-3-hydroxy-2-naphthoylhydrazone: polymorphs of oxovanadium(V) complex [VOL(OCH<Subscript>3</Subscript>)]

Abstract  

Oxovanadium(IV/V) complexes of 2-hydroxyacetophenone-3-hydroxy-2-naphthoylhydrazone (H₂L) have been synthesized and characterized. The complexes were characterized by elemental analyses, IR, electronic and EPR spectra. The oxovanadium(V) complex [VOL(OCH₃)] is crystallized in two polymorphic forms, denoted by 1a and 1b, with space groups Pn2₁a and P_[`1] P_{{\bar{1}}} , respectively. Both have distorted square pyramidal structures.     

A facile and efficient method for synthesis of xanthone derivatives catalyzed by HBF4/SiO2 under solvent-free conditions

Abstract  

HBF₄/SiO₂ was used as an efficient, green, and inexpensive catalytic system for synthesis of 12-aryl or 12-alkyl-8,9,10,12-tetrahydro-11H-benzo[a]xanthen-11-one derivatives via a one-pot three-component reaction of aldehydes, 2-naphthol, and cyclic 1,3-dicarbonyl compounds. The reactions proceeded rapidly at 80 °C under solvent-free conditions and the desired products were obtained in good to excellent yields.     

The influence of tetramethylthiourea on a two-step Zn2+ ion electroreduction in concentrated NaClO4 solutions

Abstract  

A two-step Zn²⁺ ion reduction was estimated at the dropping mercury electrode in 2, 3, and 4 mol dm⁻³ NaClO₄ with the addition of tetramethylthiourea using an impedance method at wide potential and frequency ranges. With increasing tetramethylthiourea and NaClO₄ concentrations the k_{\texts 1} ^t k_{{{\text{s}}_{ 1} }}^{t} and k_{\texts 2} ^t k_{{{\text{s}}_{ 2} }}^{t} values increased, achieving their maximum values at the highest concentrations of tetramethylthiourea in 3 and 4 mol dm⁻³ NaClO₄ solutions. The catalytic effect of tetramethylthiourea at its lowest employed concentration increased with increasing NaClO₄ concentration.     

Crystal Structures of Two Copper(I) Iodides: Chained [CuI(bta)] and Tetranuclear [(mdabco)<Subscript>2</Subscript>Cu<Subscript>4</Subscript>I<Subscript>6</Subscript>] (bta = Benzotriazole; mdabco = <Emphasis Type="Italic">N</Emphasis>-methyl-1,4-diazabicyclo[2,2,2]octane)

Abstract  

In methanol solutions, two types of organic N-donor ligands bta and dabco (bta = benzotriazole; dabco = 1,4-diazabicyclo[2,2,2]octane) were selected to react with CuI under the solvothermal conditions, creating two new copper(I) iodides as one-dimensional (1D) chained [CuI(bta)] 1 and tetranuclear [(mdabco)₂Cu₄I₆] (mdabco = N-methyl-1,4-diazabicyclo[2,2,2]octane). Note that mdabco derived from the solvothermal in situ alkylation reaction between dabco and methanol solvent. The photoluminescence analysis revealed that compound 2 is a potential fluorescence material with maximum emission at 506 nm.     

La6Pd13Cd4 and Ce6Pd13Cd4 with palladium-centred rare earth octahedra: synthesis, structure, and chemical bonding

Abstract  

The palladium-rich cadmium compounds La₆Pd₁₃Cd₄ and Ce₆Pd₁₃Cd₄ were synthesized by induction melting the elements in sealed tantalum ampoules and subsequent annealing. They were characterized by X-ray powder and single-crystal diffraction: Na₁₆Ba₆N type, Im[`3] mIm\overline{3} m, a = 988.12(9) pm, wR2 = 0.0463, 225 F ² values, and 12 variables for La₆Pd₁₃Cd₄, and a = 982.1(2) pm, wR2 = 0.0521, 215 F ² values, and 12 variables for Ce₆Pd₁₃Cd₄. The striking structural motifs are palladium-centred La₆ and Ce₆ octahedra, which are packed in a bcc fashion. Further palladium and cadmium atoms built up three-dimensional [Pd₃Cd] networks in which the La₆Pd and Ce₆Pd octahedra are embedded. Chemical bonding analyses show that the dominant interaction occurs within the palladium-centred RE ₆ octahedra, while weaker bonding exists between them.     

The synthesis of new potential photosensitizers. 1. Mono-carboxylic acid derivatives of tetraphenylporphyrin

Abstract  

A series of mono-alkylcarboxylic acid derivatives of tetraphenylporphyrin have been prepared. All the porphyrins were completely characterized by use of mass, ¹H NMR, UV–visible, and fluorescence spectroscopy. Experimental log P were determined by use of reversed-phase thin-layer chromatography with use of log P _Rekker. These porphyrins are potential photosensitizers in photodynamic therapy.     

On the protonation of dibenzo-18-crown-6

Abstract  

The stability constant of the dibenzo-18-crown-6·H₃O⁺ cationic complex species dissolved in nitrobenzene saturated with water has been determined from extraction experiments in the two-phase water–nitrobenzene system and from γ-activity measurements. Various structures of protonated dibenzo-18-crown-6 are discussed.     

SnCl2-catalyzed three-component one-pot Mannich-type reaction: efficient synthesis of β-aminocarbonyl compounds

Abstract  

SnCl₂-catalyzed three-component one-pot Mannich reaction of acetophenone or p-chloroacetophenone with different aromatic aldehydes and aromatic amines in ethanol at ambient temperature gave the corresponding β-aminocarbonyl compounds in good to excellent yields. Four new compounds are reported for the first time.     

Hydroxylammonium fluorometalate: synthesis and characterisation of a new fluorozincate

Abstract  

A new coordination compound of zinc fluoride and hydroxylammonium, (NH₃OH)₂ZnF₄, was obtained after dissolving zinc powder in hydrofluoric acid (40%) and adding solid hydroxylammonium fluoride. The colourless crystals were characterised chemically, magnetically, structurally by single-crystal X-ray diffraction analysis, and thermogravimetrically by TGA and DSC analysis. The structure consists of NH₃OH⁺ cations and ZnF₆ octahedra in which the metal ion lies on the inversion centre. Each of the ZnF₆ octahedra shares four of its vertices in a way that each vertex is shared between two octahedra. Oxygen and nitrogen atoms of hydroxylammonium cations are donors of hydrogen bonds. Hydroxylamonium fluorozincate crystallizes monoclinic, P21/c, with cell parameters a = 8.1604(4) ?, b = 5.8406(3) ?, c = 5.6586(2) ? and β = 94.745(3)°. The compound decomposes above 373 K in four steps, obtaining ZnO as the final residue. Magnetic properties of the compound were studied between 2 and 300 K, giving the prevailing diamagnetic behaviour with room temperature susceptibility of −9 × 10⁻⁵ emu mol⁻¹.     

Synthesis and structure of hydroxylammonium fluoroaluminate

Abstract  

Hydroxylammonium fluoroaluminate with the formula (NH₃OH)₂AlF₅ was synthesized by the reaction of solid NH₃OHF and an aqueous solution of aluminum in HF, and its structure was determined by single-crystal X-ray diffraction. The structure consists of NH₃OH⁺ cations and centrosymmetrical AlF₆ octahedra, which are formed by sharing two opposite corners connected in polymeric (AlF₅)_n²⁻ anions. Oxygen and nitrogen atoms of hydroxylammonium cations are donors of hydrogen bonds to terminal fluorine atoms of fluoroaluminate chains. The compound crystallizes monoclinic P2/c, with cell parameters a = 10.8675(3) ?, b = 7.3098(2) ?, c = 7.2071(2) ?, and β = 91.080(2)°. The thermal decomposition of the compound was studied by TG, DSC, and X-ray powder diffraction. By controlled heating of (NH₃OH)₂AlF₅, a new compound with the formula (NH₃OH)AlF₄ was obtained, and the final product of the decomposition is γ-AlF₃.     

A one-pot synthesis of alkyl acylcarbamodithioates from acid chlorides, thiols, and ammonium thiocyanate

Abstract  

An efficient synthesis of alkyl acylcarbamodithioates by reaction of acid chlorides with ammonium thiocyanate in the presence of thiols is described. The unusually large values of ⁵ J _FH = 12–15 Hz, observed for alkyl (2-fluorobenzoyl)carbamodithioates provide information about Ar–C–N–H torsion in these compounds.