Synthesis of some N-[pyridyl(phenyl)carbonylamino]hydroxyalkyl-(benzyl)-1,2,3,6-tetrahydropyridines as potential anti-inflammatory agents

1,2,3,6-Tetrahydropyridines are known to possess analgesic, anti-inflammatory, hyperglycemic and hypoglycemic activities. Substituted 2,4-dinitrophenylpyridinium chlorides 3 were formed by reacting 1-chloro-2,4-dinitrobenzene with hydroxypropyl, hydroxymethyl and benzyl substituted pyridines 2 . Attack of the pyridinium chlorides 3 with pyridylcarbonyl hydrazides or benzoyl hydrazides 4 gave the isolable 2,4-dinitroanilino derivative 5 which underwent hydrolysis when refluxed in water:p-dioxane mixture (1:4 v/v) to afford the pyridinium ylides 6 . Sodium borohydride reduction of 6 in absolute ethanol at 0° for 4–6 hours resulted in the isolation of the 1,2,3,6-tetrahydropyridines 7 in good yields.     

Synthesis and anti-inflammatory activities of some N-[pyridyl(phenyl)carbonylamino]-tert-butyl/phenyl-1,2,3,6- tetrahydropyridines

Nucleophilic attack of tert-butyl/phenylpyridines 3 on 1-chloro-2,4-dinitrobenzene 4 results in the formation of tert-butyl/phenyl substituted 2,4-dinitrophenylpyridinium chlorides 5. Benzoyl hydrazide and pyridyl acid hydrazides 6 were reacted with the pyridinium chlorides 5 furnishing the 2,4-dinitroanilino derivatives 7, which were subsequently hydrolyzed with water: p-dioxane to yield N-[pyridyl(phenyl)carbonylimino]-tert-butyl/phenylpyridinium ylides 8. The title compounds 9, N-[pyridyl(phenyl)carbonylamino]-tert-butyl/phenyl-1,2,3,6- tetrahydropyridines, were obtained by sodium borohydride reduction of the pyridinium ylides 8. The anti-inflammatory activities of compounds 9a-p were determined using the carrageenan-soaked sponge model of inflammation in Sprague Dawley rats. All compounds tested showed moderate to good anti-inflammatory effects compared to indomethacin. Compounds 9b, 9c and 9p were the most active analogs of the group in this model.     

Synthesis and Transformations of 2-R-5-Aryl-5,6-dihydro-7H-[1,2,4]-triazolo[5,1-b][1,3]thiazin-7-ones

A new procedure for preparation of 2-R-5-aryl-5,6-dihydro-7H-[1,2,4]triazolo[5,1-b][1,3]thiazin-7-ones by condensation of 5-R-1,2,4-triazole-3-thiones with 3-arylacryloyl chlorides was developed. The thiazine ring of the [1,2,4]triazolo[5,1-b][1,3]thiazin-7-ones is easily cleaved by treating with ammonia and hydrazine affording amides and hydrazides of 3-aryl-3-(1H-1,2,4-triazol-5-ylsulfanyl)propanoic acids. The latter react with isothiocyanates furnishing carbamoyl thiohydrazides of 3-aryl-3-(1H-1,2,4-triazol-5-ylsulfanyl)propanoic acids that in alkaline media undergo cyclization into 4-aryl-5-[2-(4H-1,2,4-triazol-5-ylsulfanyl)-2-phenylethyl]-2,4-dihydro-3H-1,2,4-triazole-5-thiones.     

Synthesis of 3-substituted N-aminopyridinium salts

Ring opening of N-(2,4-dinitrophenyl)pyridinium chlorides with hydrazine followed by recyclization resulted in the formation of N-aminopyridinium salts. The scope of this reaction sequence was determined and several new 3-substituted N-aminopyridinium salts were prepared.     

Synthesis and Characterization of Cardo Polysulfonates of 1,1′-Bis(4-Hydroxy Phenyl)Cyclohexane with 1,3-Benzene and 2,4-Toluene Disulfonyl Chlorides

Abstract

Cardo polysulfonates (PSBCB and PSBCT) of 1,1′-bis(4-hydroxy phenyl)cyclohexane with benzene-1,3 and toluene-2,4-disulfonyl chlorides have been synthesized by interfacial polycondensation of 1,1′-bis(4-hydroxy phenyl)cyclohexane (0.005 mol) with benzene-1,3/toluene-2,4-disulfonyl chlorides (0.005 mol) using water-chloroform (4:1, v/v) as interphase, alkali (0.015 mol) as acid acceptor, and cetyl trimethyl ammonium bromide (0.125 g) as emulsifier at 0°C for 3 hours. The structures of the polymers were supported by IR and NMR spectral data. The PSBCT was fractionated into several fractions by using 1,2-dichloroethane as solvent and n-butanol as precipitant. The fractions were characterized by GPC and viscometry in different solvents at four different temperatures. Viscosity studies showed that the PSBCT is flexible in solutions and has a specific solvent effect. PSBCB and PSBCT have good biological activity against E. coli and S. citrus organisms, and they possess excellent hydrolytic stability toward acids and alkalis.     

Pyrano[4,3-d]pyrimidinium salts 4. Transformations of 5,7-diaryl-1,3-dimethyl-2,4-dioxo-1H,3H-pyrano[4,3-d]pyrimidinium bromides under the action of phenylhydrazines and aromatic acid hydrazides

Reactions of 5,7-diaryl-1,3-dimethyl-2,4-dioxo-1H,3H-pyrano[4,3-d]pyrimidinium bromides with phenylhydrazines and aromatic acid hydrazides have been studied. The reaction of the salts indicated with phenylhydrazine at ∼20 °C results in the pyrylium ring opening, whereas elevated temperature leads to recyclization products, i.e., 1,3-dimethylpyrido[4,3-d]pyrimidine-2,4(1H,3H)-diones. The reactions of the starting bromides with m-carboxyphenylhydrazine and aromatic acid hydrazides lead to 6-(R-amino)-1,3-dimethyl-2,4-dioxo-1H,3H-pyrido[4,3-d]-pyrimidinium salts.     

Synthesis and Chemical Properties of Diacetylenes with Pyridinium and 4,4′‐Bipyridinium Groups

Diacetylenes (DAs) having a dipolar D‐π‐A structure (D=donor: amino group; π=π‐conjugation core; A=acceptor: pyridinium (Py) and bipyridinium (BPy) groups), i.e., 4 (APBPyDA) and 5 (APPyPyDA), or an A‐π‐A structure, i.e., 7 (DBPyDA) and 8 (PyDA(Cl)), were obtained by 1 : 1 and 1 : 2 reactions of 4,4′‐(buta‐1,3‐diyne‐1,4‐diyl)bis[benzenamine] (APDA; 3 ) with 1‐(2,4‐dinitrophenyl)‐1′‐hexyl‐4,4′‐bipyridinium bromide chloride (1 : 1 : 1) ( 1 ), 1‐(2,4‐dinitrophenyl)‐4‐(pyridin‐4‐yl)pyridinium chloride ( 2 ), or 1‐(2,4‐dinitrophenyl)pyridinium chloride ( 6 ) (Schemes 1 and 2). The anion‐exchange reactions of 8 with NaI and Li(TCNQ) (TCNQ^?=2,2′‐(cyclohexa‐2,5‐diene‐1,4‐diylidene)bis[propanedinitrile] radical ion (1?)) yielded the corresponding I^? and TCNQ^? salts 9 (PyDA(I)) and 10 (PyDA(TCNQ)). Compounds 10 and 4 exhibited a UV/VIS absorption due to a charge transfer between the TCNQ^? and the pyridinium groups and a strong solute–solvent interaction of a dipolar solute molecule in the polar environment, respectively. Compounds 8 – 10 exhibited photoluminescence in solution, whereas 4 and 7 did not because of the presence of the 4,4′‐bipyridinium quenching groups. Differential‐scanning‐calorimetry (DSC) measurements suggested that the DAs obtained in this study can be converted into poly(diacetylenes) by thermal polymerization.     

Synthesis and antimicrobial evaluation of some 1,3-thiazole, 1,3,4-thiadiazole, 1,2,4-triazole,and 1,2,4-triazolo[3,4-<Emphasis Type="Italic">b</Emphasis>][1,3,4]-thiadiazine derivatives including a 5-(benzofuran-2-yl)-1-phenylpyrazole moiety

Abstract  Potassium hydrazinecarbodithioate were prepared by treatment of acid hydrazides with carbon disulfide in the presence of potassium hydroxide. Reaction of this potassium salt with hydrazine hydrate, phenacyl bromide, or hydrazonoyl chlorides afforded 1,2,4-triazole, 1,3-thiazole, and 1,3,4-thiadiazoles. Reaction of 1,2,4-triazole with phenacyl bromide or hydrazonoyl chlorides afforded the corresponding 1,2,4-triazolo[3,4-b][1, 3, 4]-thiadiazines. All these new compounds were screened for antibacterial and antifungal activity. Some had promising activity. Graphical abstract        

A new method for the synthesis of [1,4]diazepino[6,5-b]indole derivatives

Reactions of 3-[(N-aryl-N-chloroacetyl)amino]-2-formylindoles with substituted anilines gave 1,4-diaryl-2-oxo-1,2,3,6-tetrahydro[1,4]diazepino[6,5-b]indol-4-ium chlorides and those with 4-aminopyridine yielded 4-amino-1-(1-aryl-2-oxo-2,5-dihydro-1H-pyrido[3,2-b]indol-3-yl)pyridinium chlorides. Reduction of 1,2,3,6-tetrahydrodiazepinoindol-4-ium chlorides afforded the corresponding hexahydro derivatives. An alternative synthesis of 1-(4-nitrophenyl)-3-oxo-4-phenyl-1,2,3,4,5,6-hexahydro[1,4]diazepino[6,5-b]indole from 3-[N-(4-nitrophenyl)amino]-2-[(phenylimino)methyl]indole was developed. The method involves the following sequence of transformations: reduction, chloroacetylation, and intramolecular alkylation. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2193–2199, December, 2006.     

Synthesis and antimicrobial evaluation of some 1,3-thiazole, 1,3,4-thiadiazole, 1,2,4-triazole, and 1,2,4-triazolo[3,4-b][1,3,4]-thiadiazine derivatives including a 5-(benzofuran-2-yl)-1-phenylpyrazole moiety

Abstract  

Potassium hydrazinecarbodithioate were prepared by treatment of acid hydrazides with carbon disulfide in the presence of potassium hydroxide. Reaction of this potassium salt with hydrazine hydrate, phenacyl bromide, or hydrazonoyl chlorides afforded 1,2,4-triazole, 1,3-thiazole, and 1,3,4-thiadiazoles. Reaction of 1,2,4-triazole with phenacyl bromide or hydrazonoyl chlorides afforded the corresponding 1,2,4-triazolo[3,4-b][1, 3, 4]-thiadiazines. All these new compounds were screened for antibacterial and antifungal activity. Some had promising activity.     

Reactions of Sodium Enolates Derived from 6-Aryl-3,5,5-trimethyl-2,3,5,6-tetrahydropyrane-2,4-diones with Substituted Benzenesulfonyl Chlorides and Arenediazonium Salts

Sodium enolates derived from 6-aryl-3,5,5-trimethyl-2,3,5,6-tetrahydropyrane-2,4-diones react with substituted benzenesulfonyl chlorides to give the corresponding O-sulfonation products, 6-aryl-4-(4-R-phenylsulfonyloxy)-3,5,5-trimethyl-5,6-dihydropyrane-2-ones. Reactions of the title compounds with arenediazonium tetrafluoroborates afford 6-aryl-3-arylazo-3,5,5-trimethyl-2,3,5,6-tetrahydropyran-2,4-diones as mixtures of syn and anti isomers.     

Synthesis of heterocycles. Part VI. Synthesis and antimicrobial activity of some 4-amino-5-aryl-1,2,4-triazole-3-thiones and their derivatives

4-Amino-5-aryi-1,2,4-triazole-3-thiones I react with acid chlorides to yield 4-acylamino-5-aryl-1,2,4-triazole-3-thiones II. Compounds I also react with methylene iodide, chloroacetonitrile and methyl bromoacetate to give bis-(4-amino-5-aryl-1,2,4-triazol-3-ylthio)methanes III, 4-amino-5-aryl-3-cyanomethylthio-1,2,4-triazoles IV and 4-amino-5-aryl-3-carbomethoxymethylthio-1,2,4-triazoles V, respectively. Compounds V react with hydrazine hydrate to give the corresponding acid hydrazides VI which in turn condenses with acid chlorides and aldehydes to afford respectively 1-[(4-amino-5-aryl-1,2,4-triazol-3-ylthio)acetyl]-2-aroylhydrazines VII and aryl methylene (4-amino-5-aryl-1,2,4-triazol-3-ylthio)acethydrazones VIII. The antimicrobial activities of the above compounds were screened against different strains of bacteria and fungi.     

Ring closures from enecarbamoyl thiocyanates. Syntheses of 5,6,7,8-tetrahydro-4-thio-2,4(lH,3H)-quinazolinediones and related compounds

Alkyl (1-cyclohexen-1-yl)carbamoyl chlorides ( 1 ) react with thiocyanate ion to form enecarbamoyl thiocyanates ( 2 ). In pyridine solution 2 readily isomerizes to the isothiocyanate 4 , which however is not isolated, but immediately transformed in good yields to tetrahydro-4-thio-2,4(lH,3H)quinazolinediones ( 3 ). Various transformations of 3 , including conversion to tetra-hydro-2,4(2H,4H)quinazolinedione ( 5 ), dithione ( 6 ), alkylation products ( 8 and 9 ), sodium salts 11 and Raney nickel degradation to 4,4a,5,6,7,8,8a-octahydro-l-methyl-2(1H)quinazolinone ( 7 ), were carried out to investigate their chemistry and substantiate structural assignments.     

Synthesis of Bis{(S‐methyl)azolespoly(ethylene oxide)} from 3,6‐dioxa‐1,8‐octanedithiol

Bis(1,3,4‐oxadiazoles) 4 , 5 and bis(1,2,4‐triazoles) 6a , 6b have been prepared from 3,6‐dioxa‐1,8‐octanedithiol 1 through a multistep reaction sequence. Compound 4 reacted with the appropriate alkyl halide in the presence of potassium carbonate in refluxing acetone to give the corresponding bis(S‐alkylated‐1,3,4‐oxadiazoles) 7a , 7b . The title compound 8 was prepared by condensing 4 with benzoyl bromide in the presence of triethylamine. Further, 6,9‐dioxa‐3,12‐dithiotetradecanedihydrazide 3 was converted to bis{N′‐(phenylaminocarbonyl) hydrazides} and bis{N′‐(phenylaminocarbonothioyl)hydrazides} 9a , 9b using phenylisocyanate and phenylthioisocyanate, respectively, which underwent cyclization in alkaline medium to produce 6,9‐dioxa‐3,12‐dithiotetradecane bis(4‐phenyl‐2,4‐dihydro‐3H‐1,2,4‐triazol‐3‐one) and their 3‐thio analogs 10a , 10b . The new compounds 4 , 5 , 6 , 7 , 8 , 9 , 10 were characterized by their IR, ¹H‐NMR, ¹³C‐NMR, MS, and elemental analyses.     

Some heterocyclic sulfonyl chlorides and derivatives

The syntheses of 4- and 5-chlorosulfonylfuran-2-carboxylic acid (Ia,IIa), 4-chlorosulfonylfuran-2-carboxamide (Ib), 3,5-dimethylpyrazole and isoxazole-4-sulfonyl chlorides (IIIa,IVa) and 2,4-dimethylthiazole-5-sulfonyl chloride (Va) are described. The sulfonyl chlorides were converted into a range of amides, hydrazides and azides. Condensation of the sulfonohydrazides with β-dicarbonyl compounds, gave the corresponding β-ketohydrazones (VII), which, with the exception of the derivatives (VIIe,f,g,i), were converted to the sulfonylpyrazoles (VIII). The structures and spectral data of these compounds are briefly discussed. The reaction of the sodio derivative of acetylacetone with thiophene-2-sulfonyl chloride (VIc) gave 3-(thiophene-2-sulfonyl)pentane-2,4-dione (XII), which with hydrazine gave 4-(thiophene-2-sulfonyl)-3,5-dimethylpyrazole (XIII). However, the analogous reaction with thiophene-2-sulfonohydrazide (VIa) failed to give the expected 1,4-bisthiophenesulfonylpyrazole.     

N- and C-sulfenylation of 1-(1,2-oxazol-3 (and 5)-yl)-3-alkylureas with organic sulfenyl chlorides

Condensation of chlorocarbonylsulfenyl chloride 1 with 1-(5-(1,1-dimethylethyl)-1,2-oxazol-3-yl)-3-methylurea 4a has been found to give isomeric 2,4-disubstituted-1,2,4-thiazolidine-3,5-diones 5 and 6 . Assignments are confirmed by the X-ray structure data of 6 . Sulfenylation with alkoxycarbonylsulfenyl chlorides 7 and trichloromethylsulfenyl chloride 10 of 4 occurs exclusively on N-1 rather than N-3 of the urea moiety. With the isomeric 1-[3-(1,1-dimethylethyl)-1,2-oxazol-5-yl]-3-methylurea 14 and ethoxycarbonylsulfenyl chloride 7b , C-sulfenylated derivatives 15 and 16 are formed in low yield.     

The preparation of 2-Chloroformyl-3-phenylthiazolo[3.2-a] pyridiniuin chlorides from cinnamic acids,pyridine and thionyl chloride

2-Chloroformyl-3-phenylthiazolo[3.2-a]pyridinium chlorides are among the by-products obtained when 3-chlorobenzo[b]thiophene-2-earbonyl chlorides are prepared by the reaction of cinnamic acids with thionyl chloride and pyridine.     

Reactions of 2-Amino-4-methyl-6-(2-pyridyl)- and 2-Amino-4-methyl-6-phenyl-7,8-dihydroindazolo[4,5-d]thiazoles with Aldehydes

The reaction of 2-amino-4-methyl-6-(2-pyridyl)-7,8-dihydroindazolo[4,5-d]thiazole, obtained by treating 3-methyl-4-oxo-1-(2-pyridyl)-4,5,6,7-tetrahydroindazole with pyridinium bromide perbromide and then with thiourea, and 2-amino-4-methyl-6-phenyl-7,8-dihydroindazolo[4,5-d]thiazole with 4-bromo-, 4-fluoro-, 4-dimethylamino-, 4-methoxy-, 3,4-dimethoxy-, and 3,4-methylenedioxybenzaldehydes, furfural, pyridinecarbaldehyde, and thiophenecarbaldehyde gave the corresponding Schiff bases. The products of the condensation of these aminothiazoles with cinnamaldehyde, 1-(2-pyridyl)- and 4-chloro-1-(2,4-difluorophenyl)-5-formyl-3-methyl-6,7-dihydroindazoles, 2-formyl-dimedone, and 2-formyl-1,3-indanedione were also obtained.     

π‐conjugated polymers having diaza[12]annulene rings and aminopenta‐2,4‐dienylidene groups generated by the ring opening of pyridinium rings

Reactions of N‐(2,4‐dinitrophenyl)pyridinium chloride with 2,5‐dimethyl‐1,4‐phenylenediamine in 1:2, 1:1.5, 1:1, and 2:1 molar ratios caused the ring opening of the pyridinium ring and thereby yielded polymers ( P1 – P4 ) consisting of 5‐(2,5‐dimethyl‐1,4‐phenylene)penta‐2,4‐dienylideneammonium chloride (unit A) and N‐2,5‐dimethyl‐1,4‐phenylene diaza[12]annulenium dichloride (unit B). The ¹H NMR spectra suggested that the composition ratios of unit A to unit B in P1 – P4 were 0.98:0.02, 0.94:0.06, 0.81:0.19, and 0.79:0.21, respectively. P1 – P4 showed an absorption maximum (λ_max) at a longer wavelength than the monomers because of the expansion of the π‐conjugation system. Films of P3 and P4 showed λ_max at a considerably longer wavelength than those in solution, and this was attributable to the ordered structures of the polymers in the solid state. Powder X‐ray diffraction analysis supported the ordered structures of P3 and P4 . Pellets molded from P3 and P4 exhibited a metallic luster, whereas those from P1 and P2 did not show such a luster. Cyclic voltammetry measurements indicated that P1 – P4 were electrochemically active in films. The thermal stability of the polymers depended on the composition ratios of unit A to unit B. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1507–1514, 2007     

Synthesis of 2‐Coumarinyl and Spiroindolyl‐5‐Phenyl‐1,3,4‐Oxadiazoles

The 2H‐1‐benzo/naphthopyran‐2‐one‐4‐yl (un)substituted phenyl‐1,3,4‐oxadiazoles has been synthesized by the oxidative cyclization of benzoic acid hydrazides formed in situ by the condensation of the respective 2H‐1‐benzo/naphthopyran‐2‐one‐4‐carboxaldehyde and (un)substituted monobenzoyl hydrazide in moderate yields. Also, spiro[indoline‐thiozolidine]‐2,4′‐diones has been syhthesized in a similar way from 3‐phenyl‐spiro[3H‐indoline‐3,2′‐thiozolidine]‐2,4′‐(1 H)dione monohydrazide and (un)substituted benzaldehydes.