Stacking of 2,3,5-triphenyl-2H-tetrazolium chloride onto polyelectrolytes containing 4-styrenesulfonate groups

Possible structural aspects are discussed that justify the different resistance to reduction of 2,3,5-triphenyl-2 H-tetrazolium chloride (TTC) both chemically (by reaction with ascorbic acid (ASC)) and electrochemically, in the presence of different polyelectrolytes such as poly(sodium 4-styrenesulfonate) (PSS), poly(sodium 4-styrenesulfonate- co-sodium maleate) at two different comonomer compositions (P(SS 1- co-MA 1) and P(SS 3- co-MA 1)), and poly(sodium acrylate- co-sodium maleate) (P(AA 1- co-MA 1)). Different dissociation constants are found for the complexes between TTC and the different polyelectrolytes by diafiltration (DF). Related to this, spectroscopical differences are also found by (1)H NMR and UV-vis spectroscopies. Dynamic light scattering (DLS) showed a higher tendency to undergo intermolecular aggregation for P(SS 1- co-MA 1) in the presence of TTC, a result that could be related with a higher tendency for TTC to form hydrophobic ion pairs as a consequence of single stacking with the benzene sulfonate groups (BS) of this polyelectrolyte. On the other hand, the lower tendency for PSS to undergo intermolecular aggregation could be attributable to a higher probability to form more hydrophilic adducts by means of double stacking with TTC.     

Aromatic-aromatic interaction between 2,3,5-triphenyl-2H-tetrazolium chloride and poly(sodium 4-styrenesulfonate)

Aromatic-aromatic interactions are found between the cationic molecule 2,3,5-triphenyl-2H-tetrazolium chloride (TTC) and the molecule poly(sodium 4-styrenesulfonate) (PSS) which makes the overall interaction of TTC with PSS more intense than the interaction with other polyanions containing sulfonate groups and produces a decrease on the redox ability of TTC. Diafiltration was used to compare the binding of TTC to PSS, poly(sodium vinylsulfonate) (PVS), and the more hydrophobic poly(sodium 2-(N-acrylamido)-2-methyl-propanesulfonate) (PAMPS). The UV-vis spectrum of TTC is changed in the presence of the aromatic polyanion. The 1H NMR signals of TTC are broadened and shifted in the presence of PSS, suggesting the occurrence of pi-pi interactions. Moreover, nuclear Overhauser effects (NOE) between the TTC and PSS protons are found. Possible structures for the complex are proposed.     

New organoelement polyelectrolytes: Protonated poly(alkylaminophosphazenes)

The organoelement polymer bases poly(methylaminophosphazene) and pol(ethylaminophosphazene) have been synthesized by the solid-phase aminolysis of linear ultrahigh-molecular-weight poly(dichlorophosphazene) and characterized. The related cationic polyelectrolytes have been prepared in aqueous solutions in the presence of HCl. As exemplified by the interaction with sodium polystyrenesulfonate and sodium polyphosphate, the polymers form interpolyelectrolyte complexes with anionic polyelectrolytes.     

A FLUORESCENCE STUDY OF THE INTERACTION OF INDOLIC COMPOUNDS WITH SYNTHETIC POLYELECTROLYTES

Abstract— –The interaction of indole derivatives with synthetic polyelectrolytes was investigated using UV absorption and fluorescence spectroscopy. The presence of both sodium poly(styrene sulfonate) (PSS) and sodium polyvinyl sulfonate) (PVS) inhibits the fluorescence quenching of 1-pyrene sulfonic acid by tryptamine. The effect is more marked for PSS than for PVS. There was no polyelectrolyte effect on the quenching by tryptophan. It was also found that aromatic polyelectrolytes strongly quench the fluorescence of indole derivatives of opposite charge by a static mechanism. This is accompanied by a new absorption in the red extreme of the UV spectrum of the mixtures. The systems investigated were tryptamine-PSS and polyvinyl benzyl trimethylammonium chloride) with the anions of indole-3-alkanoic acids. Equilibrium constants for the binding of the indole derivatives to the polyelectrolytes were determined. The fluorescence of zwitterionic tryptophan is not affected by the presence of the polyelectrolytes.     

Assembly of multilayer films from polyelectrolytes containing weak and strong acid moieties

Multilayer films were assembled from a copolymer containing both weakly and strongly charged pendant groups, poly(4-styrenesulfonic acid-co-maleic acid) (PSSMA), deposited in alternation with poly(allylamine hydrochloride) (PAH). The strongly charged groups (styrene sulfonate, SS) are expected to form electrostatic linkages (to enhance film stability), while the weakly charged groups (maleic acid, MA) can alter multilayer film properties because they are responsive to external pH changes. In this study, we varied several assembly conditions such as pH, SS/MA ratio in PSSMA, and the ionic strength of the polyelectrolyte solutions. The multilayer films were also treated by immersion into pH 2 and 11 solutions after assembly. Quartz crystal microgravimetry and UV-visible spectrophotometry showed that the thickness of PSSMA/PAH multilayers decreases with increasing assembly pH regardless of whether salt was present in the polyelectrolyte solutions. When no salt was added, the multilayers are thinner, smoother, and grow less regularly. Atomic force microscopy images indicate that the presence of salt in polyelectrolyte solutions results in rougher surface morphologies, and this effect is especially significant in multilayers assembled at pH 2 and pH 11. When both polyelectrolytes are adsorbed at conditions where they are highly charged, salt was necessary to promote regular multilayer growth. Fourier transform infrared spectroscopy studies show that the carboxylic acids in the multilayers are essentially ionized when assembled from different pHs in 0.5 M sodium chloride solutions, whereas some carboxylic acids remain protonated in the multilayers assembled from solutions with no added salt. This resulted in different pH stability regimes when the multilayers were exposed to different pH solutions, post assembly.     

Reversible association of thermoresponsive gold nanoparticles: polyelectrolyte effect on the lower critical solution temperature of poly(vinyl methyl ether)

Thermoresponsive gold nanoparticles (GNPs) have been prepared by the borohydride reduction of gold salt in the presence of water-soluble polymer, poly(vinyl methyl ether) (PVME). The PVME-coated GNPs (PVME-GNPs) have been assembled into large aggregates in the presence of polyelectrolytes, viz., poly(sodium-4 styrene sulfonate) and sodium salt of carboxymethylcellulose at low pH by raising the solution temperature from 20 to 40 degrees C. Increase of temperature triggers the interparticle association due to hydrophobic interaction of pendent methyl group of the surface adsorbed PVME. This assembly process is reversible with respect to temperature and pH of the medium and was studied by monitoring the change in surface plasmon resonance band of PVME-GNPs. Three-dimensional assemblies of various architectures, depending on the concentration of polyelectrolytes, were observed through transmission electron microscopy. A mechanistic model has been suggested for the reversible assembly formation that suits well with the experimental observations. The changes in optical properties of the PVME-GNPs due to their aggregation/disaggregation enabled us to use it as an effective tool to monitor the change in lower critical solution temperature (LCST) of PVME in the presence of polyelectrolytes due to interpolymer complexation at low pH. This result agrees well with the variation of LCST of pure aqueous PVME solution in the presence of polyelectrolytes measured by conventional turbidimetric technique.     

Layer-by-layer self-assembly of multiwalled carbon nanotube polyelectrolytes prepared by in situ radical polymerization

Anionic and cationic multiwalled carbon nanotube polyelectrolytes, prepared by covalent modification of multiwalled carbon nanotubes (MWCNTs) with poly(acrylic acid) and poly(acrylamide), were used for the layer-by-layer (LBL) self-assembly of MWCNTs on different substrates with polyelectrolytes, such as poly(diallyldimethylammonium chloride) and sodium poly(styrenesulfonate). Thermogravimetric analysis, Raman spectroscopy, and scanning electron microscopy (SEM) were used to demonstrate the modification of MWCNTs. Investigations using Fourier transform infrared spectroscopy, atomic force microscopy, SEM, and ultraviolet-visible spectroscopy proved this method to be practicable for preparing LBL films.     

Effect of sequential layer-by-layer surface modifications on the surface energy of plasma-modified poly(dimethylsiloxane)

Surface-initiated grafting of N,N-dimethylacrylamide, styrenesulfonate (SS), and (ar-vinylbenzyl)trimethylammonium chloride (VBTAC) from microwave plasma carboxylated, initiator-functionalized poly(dimethylsiloxane) (PDMS) surfaces was accomplished utilizing reversible addition-fragmentation chain transfer (RAFT) polymerization. Surface spectroscopic attenuated total reflectance (ATR) FT-IR analysis and atomic force microscopy (AFM) measurements were utilized to determine surface grafting and morphological surface features. The VBTAC-grafted PDMS provided a smooth, hydrophilic cationic surface for creating layer-by-layer (LBL) surfaces via alternating deposition of well-defined poly(SS) and poly(VBTAC), also prepared via aqueous RAFT. Comparisons of the ATR FT-IR spectra of the LBL assemblies and those of respective anionic poly(SS) and cationic poly(VBTAC) components confirmed strong electrostatic complexation of a fraction of the sulfonate and quarternary ammonium species in the layers as well as the existence of noncomplexed species. AFM images of surface topology indicated the presence of domains, likely phase-separated segments of the respective homopolymers, as well as interlayer mixing. The employed LBL methodology results in formation of stable, highly hydrophilic surfaces on a PDMS substrate. To our knowledge, this is the first study that illustrates surface functionalization of PDMS using microwave plasma and RAFT polymerization, followed by LBL deposition of polyelectrolytes.     

Interactions between bottle-brush polyelectrolyte layers: effects of ionic strength and oppositely charged surfactant

Interactions between cationic bottle-brush polyelectrolyte layers adsorbed on mica across salt and oppositely charged surfactant solutions were investigated with the interferometric surface force apparatus, and the results were compared with what is known for similarly charged linear polyelectrolytes. Ellipsometric measurements demonstrated that the bottle-brush polyelectrolytes, which contain 45 units long poly(ethylene oxide) side chains, are more readily desorbed than linear equivalents when the ionic strength of the solution is increased. It is argued that this is due to the steric repulsion between the poly(ethylene oxide) side chains that reduces the surface affinity. The preadsorbed bottle-brush polyelectrolyte layers were also exposed to sodium dodecyl sulfate (SDS) solutions. It was found that the presence of SDS affected the force profiles less than observed for similarly charged linear polyelectrolytes. This observation was attributed to excluded volume constraints imposed by the poly(ethylene oxide) side chains that reduces the accessibility of the charged polyelectrolyte segments and counteracts formation of large aggregates within the layer.     

Comparative study of polymeric stabilizers for magnetite nanoparticles using ATRP

A series of polyelectrolytes with controlled molecular weight, a narrow chain-length distribution, and systematic structural differences were synthesized using atom-transfer radical polymerization and investigated as stabilizers for magnetite nanoparticles in aqueous suspensions. Structural differences include the degree of polymerization, the chain architecture, and the identity of the charged functional unit. The synthesized polymers are sulfonated poly(2-hydroxyethyl methacrylate), a block copolymer of the former with poly(n-butyl methacrylate), poly(sodium styrene sulfonate), poly(sodium acrylate), and poly(sodium vinylphosphonate). The colloidal stability is assessed by measuring the fraction of particles, based on turbidity, that sediment after a period of time at increasing ionic strength. Sedimentation results are complimented by dynamic light scattering determinations of the hydrodynamic diameter of the particles that remain suspended. When adsorption and sedimentation are conducted at high pH, poly(sodium acrylate) and poly(sodium vinylphosphonate) yield the most stable suspensions because of their strong coordinative interactions with the iron oxide surface. At low pH, the polymers that retain pendant negative charges (each of the sulfonated polymers) yield high stable fractions at all ionic strengths investigated up to 100 mM (NaCl), whereas polyelectrolytes that become protonated with decreasing pH, poly(sodium acrylate) and poly(sodium vinylphosphonate), lose their stabilizing capacity even at low ionic strengths. The chain-length distribution profoundly alters a polymer's stabilization tendencies. Two poly(sodium acrylate) samples with the same number-average molecular weight but widely different chain-length distributions proved to have opposite tendencies, with the polydisperse sample being a good stabilizer and the low polydispersity one being a strong flocculant. This investigation provides guidelines for the design of polymeric stabilizers for magnetite nanoparticles according to the pH and ionic strength of the intended application.     

Stabilization of lead sulfide nanoparticles by polyamines in aqueous solutions. A structural study of the dispersions

Lead sulfide (PbS) nanoparticles have been synthesized in aqueous solutions by a reaction between inorganic lead salts and sodium sulfide and stabilized using the cationic polyelectrolytes branched poly(ethylenimine) (PEI), poly(allylamine hydrochloride) (PAH), and poly(diallyldimethylammonium chloride) (PDDA). The structures of the polyamine-stabilized nanoparticle dispersions were examined in detail using UV-vis spectroscopy, small-angle X-ray scattering (SAXS), static and dynamic electrophoretic mobility measurements, and transmission electron microscopy (TEM). Considerable differences were found between the stabilizing efficiencies of these polyelectrolytes, which cannot be attributed to their charge densities or their persistence lengths. Small monodisperse nanoparticles of PbS with a tight stabilizing shell were consistently found only when PEI was used as a stabilizer even at high pH values, although its charge density is then very low. The excellence of PEI as a stabilizer is mainly due to the extensive branching of the chains and the presence of uncharged secondary and tertiary amine groups, which apparently serve as good anchoring points at the nanoparticle surfaces. None of the polyelectrolytes examined here provide long-term protection of the nanoparticles toward oxidation by air, showing that a need for more complex multipurpose stabilizers exists for aqueous PbS dispersions.     

Polyelectrolyte complexes of poly(methacryloxyethyl trimethylammonium chloride) and poly(ethylene oxide)-block-poly(sodium methacrylate) studied by asymmetrical flow field-flow fractionation and dynamic light scattering

Polyelectrolyte complex (PEC) formation between cationic poly(methacryloxyethyl trimethylammonium chloride) (PMOTAC) and anionic poly(ethylene oxide)-block-poly(sodium methacrylate) (PEO-b-PMANa) was studied by asymmetrical flow field-flow fractionation and dynamic light scattering. The influence of ionic strength and mixing ratios of the charged units of the polyelectrolytes on the complex formation was evaluated. The diffusion coefficients and the hydrodynamic diameter distributions of the free and complexed polyelectrolytes were measured. In the absence of salt, the weight averaged hydrodynamic diameters were 48 and 28 nm for PMOTAC and PEO-b-PMANa, respectively. In the presence of salt, the particles were smaller, with weight averaged hydrodynamic diameters of 44-45 and 8-10 nm, respectively. In salt-free solution, at 1:1 mixing ratio of the charged monomer units of PMOTAC and PEO-b-PMANa, polydisperse particles with diameters of 2000-4000 nm were formed. In the presence of 20, 80, and 160 mM of sodium chloride, the 1:1 complexes were relatively monodisperse particles with weight averaged hydrodynamic diameters of 93, 124, and 120 nm, respectively.     

Thermoresponsive poly(ionic liquid): Controllable RAFT synthesis,thermoresponse, and application in dispersion RAFT polymerization

The thermoresponsive poly(ionic liquid) of poly[1‐(4‐vinylbenzyl)‐3‐methylimidozolium tetrafluoroborate] trithiocarbonate (P[VBMI][BF₄]‐TTC) showing the soluble‐to‐insoluble phase transition in the methanol/water mixture at the upper critical solution temperature (UCST) was synthesized by solution RAFT polymerization and the synthesized P[VBMI][BF₄]‐TTC was employed as macro‐RAFT agent to mediate the RAFT polymerization under dispersion condition to afford the thermoresponsive diblock copolymer nanoparticles of poly[1‐(4‐vinylbenzyl)‐3‐methylimidozolium tetrafluoroborate]‐b‐polystyrene (P[VBMI][BF₄]‐b‐PS). The controllable solution RAFT polymerization was achieved as indicated by the linearly increasing polymer molecular weight with the monomer conversion and the narrow molecular weight distribution. The P[VBMI][BF₄]‐TTC macro‐RAFT agent mediated dispersion polymerization afforded the P[VBMI][BF₄]‐b‐PS nanoparticles, the size of which was uncorrelated with the polymerization degree of the P[VBMI][BF₄] block. Several parameters including the polymerization degree, the polymer concentration and the water content in the solvent of the methanol/water mixture were found to be correlated with the UCST of the poly(ionic liquid). The synthesized poly(ionic liquid) is believed to be a new thermos‐responsive polymer and will be useful in material science. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 945–954     

Aggregation and protein binding of sodium maleate copolymers with varying hydrophobicities

Copolymers of sodium maleate with methyl methacrylate, styrene, or vinyl acetate have been synthesized and studied in aqueous NaCl solutions of various ionic strengths. The polymers are polyelectrolytes with varying hydrophobicities, and their solution properties have been studied using static and dynamic light scattering. Copolymers containing methyl methacrylate or styrene were shown to aggregate in water upon increasing salt concentration. Copolymers of sodium maleate and vinyl acetate do not associate with increasing ionic strength. The binding of bovine serum albumin and cytochrome C to the sodium maleate copolymers was also investigated by light scattering. It was observed that cytochrome C forms complexes with the copolymers containing methyl methacrylate or vinyl acetate whereas albumin does not bind to any of the copolymers studied. Copyright © 2004 John Wiley & Sons, Ltd.     

Formation of copper sols via reduction of Cu2+ ions in solutions of cationic and anionic polyelectrolytes

Zero-valence copper sols are prepared at 20°C via the chemical reduction of Cu(II) ions in aqueous solutions of high-molecular-mass cationic and anionic polyelectrolytes [(poly(1,2-dimethyl-5-vinylpyridium methyl sulfate) and poly(sodium styrenesulfonate), respectively]. In both sols, metal nanoparticles are characterized by narrow size distribution, indicating the pseudomatrix mechanism of their formation; however, the diameter of spherical copper particles formed in the polycation solution (3–14 nm) is much smaller than that of particles formed in the solution of polyanion (10–30 nm). Causes of different sizes of metal nano-particles formed in solutions of polyelectrolytes with different chain charges are discussed in terms of the pseudomatrix mechanism of new phase synthesis in polymer solutions and classical electrocapillary theory.     

Interaction of aluminum polyhydroxochloride sol and poly(4-vinylbenzene sulfonic acid) sodium salt

The interaction of aluminum polyhydroxochloride sol and poly(4-vinylbenzene sulfonic acid) sodium salt is studied. It is found that, in dilute aqueous solutions at pH 4.6, aluminum polyhydroxochloride sol and poly(4-vinylbenzene sulfonic acid) sodium salt form insoluble polymer-colloid complexes of steady compositions. Potentiometric titration data show that the interaction between particles of aluminum polyhy-droxochloride sol and linear macromolecules of the polyelectrolyte occurs via salt bonds formed between unlikely charged groups on the surface of particles and units of the linear polyelectrolyte. The composition of the polymer-colloid complex is determined, and the degree of conversion for the reaction of aluminum poly-hydroxochloride sol and poly(4-vinylbenzene sulfonic acid) sodium salt is estimated. The influence of various polyelectrolytes on the stability of the polymer-colloid complex is studied.     

Energy transfer between conjugated polyelectrolytes in layer-by-layer assembled films

We present a study of Fo?rster resonance energy transfer (FRET) between two emissive conjugated polyelectrolytes (CPEs) in layer-by-layer (LbL) self-assembled films as a means of examining their organization and architecture. The two CPEs are a carboxylic acid functionalized polyfluorene (PFl-CO(2)) and thienylene linked poly(phenylene ethynylene) (PPE-Th-CO(2)). The PFl-CO(2) presents a maximum emission at 418 nm, while the PPE-Th-CO(2) has an absorption λ(max) centered at 431 nm, in sufficient proximity for effective FRET. Several LbL films have been constructed using varied concentrations of the deposition solutions and identity of the buffer layers separating the two emissive layers, using a system of either weak polyelectrolytes, poly(allylamine hydrochloride) (PAH)/poly(sodium methacrylate) (PMA), or strong polyelectrolytes, poly(diallylammonium chloride) (PDDA)/poly(styrene sulfonate) sodium (PSS). The efficiency of FRET has been monitored using fluorescence spectroscopy. Initially, the fluorescence of the PFl-CO(2) (E(g) ～ 3.0 eV), which emits at 420 nm, is quenched by the lower band gap PPE-Th-CO(2) (E(g) ～ 2.5 eV). For films using the PAH/PMA system as buffer bilayers and deposited from 1 mM solutions, the PFl-CO(2) fluorescence is progressively recovered as the number of intervening buffer bilayers is increased. Ellipsometry measurements indicate that energy transfer between the two emissive layers is efficient to a distance of ca. 7 nm.     

Interactions between hairy rod anionic conjugated polyelectrolytes and nonionic alkyloxyethylene surfactants in aqueous solution: observations from cloud point behaviour

The effect of three anionic, hairy-rod fluorene based conjugated polyelectrolytes on the cloud points of the alkyloxyethylene surfactants C10E3, C12E4, C12E5, and C12E6 has been studied in aqueous solution. Although the association behaviour of these rigid polymers with surfactants is different from that of more flexible polyelectrolytes, both types of polymers are seen to increase the cloud points, probably as a consequence of associative interactions. The possible importance of Coulombic interactions is suggested by the decrease in cloud points with these systems in the presence of NaCl. With the conjugated polyelectrolytes, the effect appears to be most pronounced with poly[9,9-bis(4-phenoxybutylsulfonate)fluorene-co-2,5-thienylene], which may result from specific interactions between oxyethylene groups and the thiophene ring. The value of cloud point behaviour in designing water based formulations for preparation of devices of these conjugated polyelectrolytes is discussed.     

Effect of chain length and charge density on the construction of polyelectrolyte multilayers on colloidal particles

Two combinations of sodium poly(4-styrene sulfonate) (PSS) and poly(allylamine hydrochloride) (PAH) of different chain length and charge density are employed to construct multilayer films. The polyelectrolytes are assembled layer-by-layer on colloidal particles in the absence of salt. We have investigated the formation and electrical characteristics of the films by using electric light scattering technique. The results show that the film thickness is independent of the chain length when fully charged PAH (at pH 4.6) is combined with fully charged PSS. When the films are prepared with less charged PAH (at pH 6.7) and fully charged PSS, lower thickness is found for the film with shorter polymer chains. In all cases, the thickness increment realized on addition of the polymer with lower molar concentration is partially lost on exposure to the solution with higher concentration of the oppositely charged partner. When the film growth is regular (at equal molar concentrations of the fully charged polyelectrolytes), the ratio of PSS to PAH charge, estimated from the electro-optical effect values, exceeds 1. The electro-optical effect is also higher for the films ending with PSS when fully charged PSS is combined with less charged PAH (at pH 6.7). This reveals the key role of the charge in the last-adsorbed layer for the electro-optical behavior of the whole film.     

Protein–induced aggregation of fluorescent conjugated polyelectrolytes with sulfonate groups: Synthesis and its sensing application

Anionically charged fluorescent conjugated polyelectrolytes of poly{[4,7‐(2,1,3‐benzothiadiazole)‐alt‐1,4‐phenylene]‐co‐[2,5‐bis(4‐sulfonatobutoxy)‐alt‐1,4‐phenylene]} ( P1 ) and poly{[4,7‐(bis(thiophen‐2‐yl)benzo‐2,1,3‐thiadiazole)‐alt‐1,4‐phenylene]‐co‐[2,5‐bis(4‐sulfonatobutoxy)‐alt‐1,4‐phenylene]} ( P2 ) were synthesized by Suzuki crosscoupling polymerization in the presence of a palladium catalyst. The conjugated polyelectrolytes with sulfonate groups, as efficient signal amplifying reporters, were carefully designed to be soluble in water over the entire pH range examined and interact with proteins through intermolecular forces. The polymers exhibited blue emission in aqueous solutions but green or red emission in solid form depending on the conjugation length due to intermolecular exciton migration. The anionic conjugated polymers exhibited blue‐to‐green or blue‐to‐red changes in fluorescence upon exposure to charged proteins, indicating that the polymers have potential applications in fluorescent array systems for protein. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010